Infineon

CY8C3446AXA-105 - 50MHz 64KB PSoC 3 MCU | Infineon

料号: CY8C3446AXA-105 ✓ 量产中
1.71 V to 5.5 V Vdss 100-pin TQFP Package 50 MHz Speed 64 KB Memory
最小起订量: 1 |

CY8C3446AXA-105 概述

The Infineon CY8C3446AXA-105 is a PSoC 3 CY8C34xx programmable system-on-chip microcontroller with an 8-bit 8051 CPU, 50 MHz operating frequency, 64 KB of flash memory, and a 100-pin TQFP package measuring 14 mm by 14 mm. Its operating voltage range is 1.71 V to 5.5 V, making it suitable for embedded systems that require configurable peripherals and compact integration.

A programmable system-on-chip, or PSoC, combines a microcontroller core, programmable digital and analog resources, memory, and configurable I/O in one integrated device. The CY8C34xx belongs to the PSoC 3 family, where the CPU and embedded flash provide the fundamental control platform while configurable blocks support application-specific signal conditioning, control, and interface functions.

The CY8C3446AXA-105 combines a 50 MHz 8051 CPU with 64 KB of flash organized as 64K by 8 bits. Its 100-TQFP package provides 100 external connection positions for digital and analog functions, while the 1.71 V to 5.5 V supply range allows operation across low-voltage embedded systems. The related CY8C3446 family is also described by Infineon as containing 24 digital blocks, demonstrating the programmable architecture available within the family.

The main technical benefit of this device is integration. Instead of using separate logic devices for control, input conditioning, and programmable peripheral functions, a designer can configure many resources in firmware. This can reduce board area and component count, although final resource assignments and performance must be checked against the manufacturer datasheet for the exact configuration being used.

Typical applications include industrial control modules, programmable sensor interfaces, compact automation equipment, embedded measurement systems, and consumer or industrial products requiring a broad set of programmable I/O. The 50 MHz CPU provides a higher operating rate than the 24 MHz member referenced for the same family, while 64 KB of embedded flash supports firmware, configuration data, and application logic.

PCB design should preserve the manufacturer's recommended power, decoupling, and pin-assignment requirements. Because the device has 100 package pins and combines multiple programmable functions, engineers should verify the pin configuration in the manufacturer datasheet, route sensitive analog or timing-sensitive signals away from fast digital outputs, and place bypass capacitors close to the appropriate supply pins.

This page consolidates the verified product identity, electrical headline specifications, lifecycle information, drop-in alternatives, comparison data, and practical implementation guidance. It is intended to accelerate component evaluation while keeping the final design decisions tied to the official Infineon documentation.

直接替换替代料: CY8C3446AXA-105 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: CY8C3446AXA-105 (相同外形与封装尺寸) ——差异在于 Package, Product Type.

Infineon
Package: TQFP-100, 14 x 14 mm
Product Type: PSoC 3 programmable system-on-chip microcontroller
对比 CY8C3446AXA-105 →

CY8C3446AXI-105

✅ 直接替换
Infineon
📦 100-pin TQFP
PSoC 3 programmable system-on-chip microcontroller · 8-bit 8051 · 50 MHz · 64 kB · 8 kB · 2 kB · 8 kB · 24 blocks

联系询价

查看数据手册 →

CY8C3446AXA-105 最大额定值与电气特性

Product Type Programmable System-on-Chip (PSoC) microcontroller
Product Series PSoC 3 CY8C34xx
CPU Architecture 8-bit 8051
Maximum CPU Frequency 50 MHz
Flash Memory Size 64 KB
Flash Memory Organization 64K x 8 bits
Programmable Digital Blocks 24 blocks
Operating Voltage Range 1.71 V to 5.5 V
封装 100-pin TQFP
Package Dimensions 14 mm x 14 mm
安装类型 Surface mount
引脚数 100 pins

CY8C3446AXA-105 14 mm x 14 mm 引脚配置指南

CY8C3446AXA-105(14 mm x 14 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

CY8C3446AXA-105 的 14 mm x 14 mm 封装引脚图

暂无详细引脚数据: CY8C3446AXA-105.

请参阅 数据手册 以查看完整引脚配置。

典型应用

CY8C3446AXA-105 适用于 6 应用s: Industrial Automation Control, Programmable Sensor Interface, Programmable Logic Controller, Embedded Measurement System, Compact Consumer Controller, Automated Test Equipment.

🏭

Industrial Automation Control

The CY8C3446AXA-105 fits compact industrial automation modules because its 50 MHz 8051 CPU can execute control logic while 24 programmable digital blocks provide configurable I/O behavior. The 64 KB flash stores application firmware and configuration parameters, and the 1.71 V to 5.5 V operating range supports low-voltage embedded rails. Designers can place sensing, conditioning, and control functions into one device instead of using several fixed-function logic components. The 100-pin TQFP also exposes substantially more signals than a small microcontroller package, allowing distributed inputs and outputs to be consolidated. Before layout release, verify the exact temperature grade, peripheral assignments, and pin requirements against the Infineon documentation.

🧩

Programmable Sensor Interface

The CY8C3446AXA-105 is useful in programmable sensor-interface products that need configurable digital functions alongside a general-purpose controller. Its 50 MHz 8051 core can supervise acquisition sequences and apply filtering or threshold logic, while the family's 24 digital blocks can implement timing and interface functions where configuration permits. The 64 KB flash provides space for firmware, lookup tables, and calibration information. Operating from 1.71 V to 5.5 V also allows the controller to operate near compatible low-voltage sensor rails. Confirm the required ADC resources, comparator functions, external interfaces, and temperature limits before assigning pins, because those characteristics are not established by the headline product listings.

🔧

Programmable Logic Controller

The CY8C3446AXA-105 can serve as the core of a compact programmable logic controller because it combines an 8051 processor with 24 programmable digital blocks and 64 KB of embedded flash. The 50 MHz operating rate supports responsive sequencing, while the large 100-pin package provides access to numerous external signals for inputs, outputs, communications, and interlocks. This integration can reduce discrete logic count and simplify firmware-driven behavior changes. A practical design should reserve pins for programming, clocking, reset, and communications rather than assigning every available signal to production logic. Validate timing, drive strength, and interrupt resources for each PSoC configuration against the official datasheet.

🖥️

Embedded Measurement System

The CY8C3446AXA-105 is appropriate for embedded measurement systems that combine control, data conditioning, and programmable digital functions. Its 50 MHz 8051 CPU can coordinate measurements, perform fixed-point processing, and manage calibration information, while 64 KB flash supports firmware and configuration data. The 1.71 V to 5.5 V supply range allows the MCU to operate from compatible low-voltage systems without requiring a separate high-voltage rail. The 100-pin TQFP offers more external connectivity than compact packages, which helps when multiple sensor inputs and status outputs are required. Verify ADC accuracy, reference voltage, sampling architecture, and analog pin assignments in the manufacturer datasheet before finalizing the measurement front end.

📱

Compact Consumer Controller

The CY8C3446AXA-105 can support compact consumer controllers that require flexible I/O and moderate real-time processing without a large external logic tree. Its 50 MHz 8051 CPU and 64 KB flash are suitable for managing user inputs, indicators, actuators, and product-specific behavior. The 1.71 V to 5.5 V range can simplify power architecture when the surrounding product already operates at a compatible rail. Because the device is offered in a 100-pin TQFP, it is better suited to products with substantial external connectivity than to minimalist wearables. Confirm package temperature ratings, flash retention, programming method, and lifecycle commitments for the intended production volume before schematic approval.

⚡

Automated Test Equipment

The CY8C3446AXA-105 is suitable for automated test equipment controllers that coordinate stimuli, measurements, sequencing, and communications. The 50 MHz 8051 core handles real-time control, while 24 programmable digital blocks can implement deterministic timing and signal-routing functions where the selected configuration supports them. Its 64 KB flash stores test sequences, calibration constants, and firmware, and the 100-pin package provides enough external connectivity for control and instrumentation interfaces. The 1.71 V to 5.5 V range supports embedded low-voltage subsystems, although separate analog and high-voltage stages remain necessary. Validate timer accuracy, I/O characteristics, communications peripherals, and thermal requirements before using it as a precision timing controller.

What is the CY8C3446AXA-105?
The CY8C3446AXA-105 is an Infineon PSoC 3 programmable system-on-chip microcontroller with an 8-bit 8051 CPU, 50 MHz operating frequency, 64 KB of flash, and a 100-pin TQFP package. According to the Infineon manufacturer product page for the related CY8C3446 family, the family includes 24 digital blocks, making the device suitable for embedded products that benefit from programmable logic and I/O resources.
What are the key specifications of CY8C3446AXA-105?
The CY8C3446AXA-105 combines a 50 MHz 8-bit 8051 CPU, 64 KB of 64K x 8 flash, 24 programmable digital blocks, a 1.71 V to 5.5 V supply range, and a 100-pin TQFP package. According to Infineon product information, the device belongs to the PSoC 3 CY8C34xx family and is intended for compact embedded control systems requiring integrated programmable resources.
What is the CY8C3446AXA-105 operating voltage range?
The CY8C3446AXA-105 operates from 1.71 V to 5.5 V. Mouser's manufacturer-sourced product listing identifies the same voltage range for the device, while DigiKey identifies it as an 8-bit PSoC 3 microcontroller with a 50 MHz CPU and 64 KB flash. Supply design must therefore support voltages within 1.71 V to 5.5 V while meeting the decoupling requirements in the Infineon documentation.
Where can I download the CY8C3446AXA-105 datasheet PDF?
The official Infineon product page at https://www.infineon.com/part/CY8C3446AXI-105 provides the manufacturer documentation for the closely related CY8C3446 family member. Search the page for the linked PDF datasheet, package information, and ordering details. The AXA and AXI ordering variants require careful comparison of qualification and temperature-grade options before substitution.
Where can I find the CY8C3446AXA-105 pinout?
The CY8C3446AXA-105 pinout is identified as a 100-pin TQFP, but a complete numbered pin list is not included on the visible product pages. Use the package drawing and pin-connection table in the official Infineon family datasheet when assigning PCB nets. The package drawing also distinguishes the 14 mm by 14 mm TQFP body and its 100 connection positions.
Can CY8C3446AXI-105 replace CY8C3446AXA-105?
The CY8C3446AXI-105 can serve as a pin-compatible option because both devices are listed with a 100-pin TQFP package, 50 MHz 8051 CPU, 64 KB flash, and 1.71 V to 5.5 V operating range. The ordering-code grade designation differs, so qualification and temperature requirements must be checked against the manufacturer ordering information before approving the substitution for production.
What is the best drop-in replacement for CY8C3446AXA-105?
The CY8C3446AXI-105 is the closest listed drop-in alternative because it retains the 100-pin TQFP footprint, 50 MHz CPU, 64 KB flash, and 1.71 V to 5.5 V supply range. Its listed headline electrical ratings differ by 0%, but the ordering-grade suffix differs. Confirm temperature grade, qualification, lifecycle status, and errata requirements in the Infineon documentation before substitution.
Is CY8C3446AXA-105 suitable for industrial control applications?
The CY8C3446AXA-105 is suitable for compact embedded control designs when its electrical ratings and qualification match the operating environment. Its 50 MHz 8051 CPU provides real-time processing capacity, 64 KB flash supports embedded firmware, and 24 programmable digital blocks can reduce the need for separate logic. The exact temperature limits and qualification status must be confirmed before environmental deployment.
CY8C3446AXA-105 vs CY8C3446AXI-105: which is better?
Both devices retain the same principal listed ratings: a 50 MHz 8051 CPU, 64 KB flash, 24 digital blocks, and a 100-pin TQFP package. The choice depends on the ordering grade and qualification requirements associated with the AXA and AXI suffixes. CY8C3446AXA-105 should be selected when it matches the required automotive or system-grade criteria for the target product.
When should I choose CY8C3446AXA-105 over a lower-speed PSoC 3 member?
Choose CY8C3446AXA-105 when the design benefits from its 50 MHz 8051 processing rate rather than a lower-speed family option. The 50 MHz rating is approximately 2.08 times the 24 MHz rating associated with the lower-speed CY8C3446AXA-098 member listed in the comparison information. Confirm that the extra processing capability is needed rather than adding unnecessary power, cost, or qualification constraints.
Where can I buy CY8C3446AXA-105 online?
Use the Request a Quote form on this page to request CY8C3446AXA-105 availability, volume pricing, and lead time. The form is the appropriate commercial channel for a programmable microcontroller order because package, programming, qualification, and production quantities should be confirmed together. The manufacturer's ordering information should be used to verify the exact AXA-105 configuration.
What is the price of CY8C3446AXA-105?
Current CY8C3446AXA-105 pricing should be requested through the Request a Quote form on this page. A quote allows the exact MPN, quantity, delivery schedule, and sourcing requirements to be matched to the intended production order. Do not use the lower-priced CY8C3446AXI-105 listing as a price proxy because the ordering-grade suffixes are different.
What is the lead time and stock status for CY8C3446AXA-105?
Request current stock, minimum order quantity, and lead time for CY8C3446AXA-105 through the Request a Quote form on this page. Because embedded microcontroller supply can vary with production schedules, allocation, package configuration, and qualification requirements, a current factory-confirmed commitment is preferable to assuming that a distributor listing guarantees the production quantity.
Is CY8C3446AXA-105 currently in stock?
Current CY8C3446AXA-105 stock should be confirmed through the Request a Quote form on this page. The form can capture the required quantity, delivery location, target date, and permissible order conditions. Engineers should also check the manufacturer ordering information for the exact AXA-105 configuration before committing a production schedule.
What is the CY8C3446AXA-105 footprint?
The CY8C3446AXA-105 uses a surface-mount 100-pin TQFP package measuring 14 mm by 14 mm. Its footprint must follow the official package drawing, including body dimensions, lead geometry, pin numbering, and solder-pad design. A 100-pin package leaves little routing tolerance, so verify the complete pin map and exposed programming or debug functions in the Infineon datasheet before layout release.

工程参考数据: CY8C3446AXA-105 ——对比、设计指导和合规信息。

选型指南

Choose CY8C3446AXA-105 for a PSoC 3 design requiring a 50 MHz 8051 CPU, 64 KB flash, 24 programmable digital blocks, a 1.71 V to 5.5 V supply range, and a 100-pin TQFP footprint. Select CY8C3446AXI-105 when the same electrical and package characteristics are required but its ordering grade is acceptable for the target environmental and qualification requirements. A lower-frequency member such as CY8C3446AXA-098 may be appropriate when 24 MHz is sufficient, because its lower clock rate can reduce processing demand. The CY8C3444AXA-106 and CY8C3244AXA-143 references are useful family-comparison points but are not presented as drop-in replacements because their resource sets and ordering parameters are not fully confirmed. For any substitution, compare the official datasheet pin table, temperature grade, qualification, errata, and programming configuration rather than relying only on the package and CPU frequency.

与替代料对比

参数 本产品 CY8C3446AXI-105
Package 100-pin TQFP, 14 mm x 14 mm 100-pin TQFP, 14 mm x 14 mm
Brand Infineon Technologies Infineon Technologies
CPU Architecture 8-bit 8051 8-bit 8051
Maximum CPU Frequency 50 MHz 50 MHz
Flash Memory 64 KB, 64K x 8 bits 64 KB
Operating Voltage Range 1.71 V to 5.5 V 1.71 V to 5.5 V
Programmable Digital Blocks 24 blocks 24 blocks
Ordering-Grade Suffix AXA AXI

关键差异点

  • Higher listed CPU frequency than the lower-speed CY8C3446AXA-098 family member (对比 CY8C3446AXA-098)
  • Pin-compatible family option retains the principal electrical ratings (对比 CY8C3446AXI-105)
  • High pin count supports consolidated embedded control (对比 CY8C3444AXA-106)

设计说明

Route the 100-pin TQFP footprint directly from the official Infineon package drawing and land pattern. Keep programming, reset, clock, and communication pins accessible for production programming, and preserve the package orientation mark in the PCB artwork. A 100-lead footprint has fine-pitch routing and assembly sensitivity, so validate courtyard clearance, solder mask, and paste deposits with the fabricator before release.

Place the required bypass capacitors at the corresponding power pins and minimize the supply-loop impedance. The supported operating range is 1.71 V to 5.5 V, so do not allow rail tolerance, transient droop, or cross-coupled noise to push the device outside that range. Use the manufacturer's recommended capacitor values and decoupling topology rather than selecting arbitrary high-capacitance parts that may increase inrush or supply-transient behavior.

Separate sensitive analog, timing, and communication routes from fast switching outputs where the application allows it. PSoC digital blocks can be configured by firmware, so a pin that is quiet in one firmware configuration may become a high-speed output in another. Establish signal-integrity constraints from the actual pin configuration and external board requirements, and include ground-return paths that minimize loop area.

Do not treat AXA and AXI ordering-code variants as unconditional replacements without checking temperature grade, qualification, and errata requirements. The CY8C3446AXI-105 retains the visible 50 MHz, 64 KB, 100-pin TQFP, and 1.71 V to 5.5 V headline ratings of the target, but the grade suffix can determine environmental suitability. Record the exact approved MPN in the BOM and schematic notes.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The visible manufacturer and distributor product information does not establish the requested compliance attributes for the exact CY8C3446AXA-105 configuration.

相关搜索

CY8C3446AXA-105 datasheet CY8C3446AXA-105 specifications CY8C3446AXA-105 pinout CY8C3446AXA-105 datasheet pdf CY8C3446AXA-105 replacement CY8C3446AXA-105 equivalent CY8C3446AXA-105 footprint CY8C3446AXA-105 price CY8C3446AXA-105 stock Infineon CY8C3446AXA-105 CY8C3446 50MHz 64KB TQFP CY8C3446AXA-105 vs CY8C3446AXI-105

相关元器件 & 术语

Infineon Technologies CY8C3446AXA-105 CY8C3446AXI-105 CY8C3446AXA-098 CY8C3444AXA-106 CY8C3244AXA-143 PSoC 3 Programmable System-on-Chip Microcontroller 8051 CPU 8-bit CPU Embedded flash Programmable digital block TQFP-100 Surface mount 50 MHz 64 KB flash 1.71 V to 5.5 V Industrial automation Programmable sensor interface Automated test equipment Embedded measurement system
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情