DS90LV028ATM-TI - 400 Mbps Dual LVDS Receiver | TI
MPN: DS90LV028ATM-TI ✓ نشطDS90LV028ATM-TI نظرة عامة
An LVDS receiver is a high-speed interface component that converts a small-amplitude differential signal into a complementary CMOS output. Differential signaling rejects common-mode noise and is used when signal integrity, clock recovery, and data-transfer rate are more important than minimizing the number of interconnects. In the broader electronics hierarchy, the DS90LV028ATM-TI belongs to the interface IC and line-receiver category rather than being a general-purpose logic device.
The receiver is intended for applications requiring ultra-low power dissipation, low noise, and high data rates. Its differential input architecture supports reliable reception over longer board or cable distances than ordinary single-ended CMOS interfaces. Because it is a dual receiver, one device can receive two independent LVDS channels, making it suitable for parallel data links, point-to-point interfaces, and clock-and-data distribution systems.
The 8-pin SOIC package provides a compact surface-mount implementation for industrial, communications, and embedded systems. The receiver converts differential LVDS inputs into CMOS-compatible outputs, allowing the downstream logic to operate with ordinary digital input thresholds. The 400-Mbps capability makes the device relevant to high-speed control links, backplanes, instrumentation, and embedded processor communication where a standard low-speed transceiver would be insufficient.
The DS90LV028ATM-TI should be used when the design requires a dual LVDS input stage and a 3.3 V-class CMOS interface. Layout should preserve controlled differential impedance, minimize stub length, and provide a continuous return path beneath the pair. Input and output decoupling should be placed close to the relevant pins. The component is not a power IC, so SOA information is not applicable.
This product page combines the device function, package characteristics, verified manufacturer information, drop-in replacement guidance, comparison data, and practical PCB design notes for engineers evaluating the DS90LV028ATM-TI.
بدائل مباشرة لـ DS90LV028ATM-TI — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
DS90LV028ATM/NOPB
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
DS90LV028ATMX/NOPB
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
DS90LV028ATM-TI المواصفات
| Product Type | Dual CMOS differential line receiver |
| Receiver Configuration | 2-channel receiver |
| Technology | Low Voltage Differential Signaling (LVDS) |
| Maximum Data Rate | Greater than 400 Mbps |
| Equivalent Clock Frequency | 200 MHz |
| Typical Differential Input Voltage | 350 mV |
| Output Interface | CMOS |
| جهد التغذية | 3 V |
| Power Dissipation | Ultra-low power design |
| Noise | Low-noise receiver design |
| العلبة | 8-pin SOIC |
| نوع التركيب | Surface mount |
دليل تكوين أطراف DS90LV028ATM-TI 8-pin soic
تكوين الأطراف لـ DS90LV028ATM-TI (حزمة 8-pin soic). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ DS90LV028ATM-TI.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
DS90LV028ATM-TI مناسب لـ 6 التطبيقs: High-Speed Point-to-Point Data Links, Clock and Data Recovery, Industrial Control and Instrumentation, Embedded Processor Communication, Parallel Bus Interconnect, Low-Power Sensor and Sensor Hub Interface.
High-Speed Point-to-Point Data Links
The DS90LV028ATM-TI fits point-to-point digital links that must move data faster than ordinary CMOS interfaces while keeping signal count low. Each receiver channel accepts a small differential LVDS signal, with a typical input amplitude of 350 mV, and produces CMOS-compatible outputs for downstream logic. Its data-rate capability in excess of 400 Mbps allows the link to operate at a 200 MHz equivalent clock rate. In a board-to-board implementation, the device can receive two channels while the differential signaling limits susceptibility to common-mode noise. The principal design requirement is controlled impedance and a continuous return path beneath the LVDS pair.
موصى به
Clock and Data Recovery
The DS90LV028ATM-TI is useful when a system must receive a differential clock alongside a data channel. A common LVDS source can drive the two receiver inputs, allowing the recovered CMOS clock and data to enter a controller or programmable logic device on matched board routing. Operation above 400 Mbps provides margin for digital processing and clock distribution. Because the receiver is dual-channel, designers can use one package for clock plus data instead of separate single-channel devices. Timing validation should account for propagation delay, input threshold behavior, and the skew between channels described by the manufacturer timing characteristics.
موصى به
Industrial Control and Instrumentation
The DS90LV028ATM-TI can serve as the receiving stage in industrial control equipment where a compact cabinet contains high-speed digital equipment and relatively noisy power or switching systems. Differential LVDS reduces the impact of common-mode disturbance, while the receiver's low-noise and ultra-low-power characteristics suit compact instrumentation. Two receive channels can be assigned to a data bus and a synchronizing signal. The 8-pin SOIC package simplifies assembly into control cards, although the final system must maintain controlled trace geometry and provide local bypass capacitors to prevent supply transients from affecting the CMOS outputs.
موصى به
Embedded Processor Communication
The DS90LV028ATM-TI is appropriate for embedded systems that need a low-noise receive interface between an LVDS-speaking peripheral and CMOS logic. A processor or controller can operate from the receiver's CMOS outputs while the external peripheral uses differential signaling for greater noise immunity and edge-rate capability. With throughput above 400 Mbps, the receiver supports demanding parallel data paths, although real system throughput must also account for bus width, protocol overhead, and controller timing. The short 8-pin SOIC package leaves more board area for processing and power components while preserving a standardized small-outline footprint.
موصى به
Parallel Bus Interconnect
The dual-channel DS90LV028ATM-TI can help implement a compact parallel interconnect in which each differential pair carries one data lane or a related clock. Its 200 MHz equivalent clock capability is substantially faster than ordinary low-speed transceiver approaches and can accommodate source-synchronous transfers when transmitter, receiver, and board timing are designed together. Differential routing improves noise immunity compared with single-ended implementations. The receiver should be located close to the destination logic to minimize the unshielded high-speed segment, while input branches and test pads should be arranged so they do not create appreciable impedance discontinuities.
موصى به
Low-Power Sensor and Sensor Hub Interface
The DS90LV028ATM-TI can receive high-speed differential data from sensor concentrators, remote sensor nodes, or data-acquisition modules when the interconnect must remain reliable in electrically noisy environments. Its low-power receiver architecture supports compact equipment, while dual channels allow a node to return data and receive commands or a common synchronization signal. The CMOS outputs can feed an embedded MCU, CPLD, or programmable logic without requiring another differential receiver stage. Signal integrity remains the main implementation constraint: use a balanced pair, avoid unnecessary connectors or test branches, and confirm that the transmitter's output levels and termination arrangement match the receiver requirements.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ DS90LV028ATM-TI — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | DS90LV028ATM/NOPB | DS90LV028ATMX/NOPB |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Device Type | Dual CMOS differential line receiver | Dual LVDS receiver | Dual LVDS receiver |
| Receiver Configuration | 2-channel receiver | 0/2 receiver | 0/2 receiver |
| Signal Technology | LVDS | LVDS | LVDS |
أبرز الفروقات
- Dual high-speed LVDS reception in a compact package (مقابلDS90LV028ATM/NOPB)
- Supports data rates in excess of 400 Mbps (مقابلDS90LV028ATMX/NOPB)
- Low-noise differential receive architecture (مقابلDS90LV001TMX)
ملاحظات التصميم
Route each LVDS signal as a tightly coupled differential pair on a continuous reference plane. Match the pair geometry to the PCB stackup's intended differential impedance, minimize layer transitions, and keep test pads or unused branches short. Avoid routing one conductor of the pair over a split in the reference plane, because this can create an impedance discontinuity and convert common-mode noise into differential jitter.
Do not assume that every dual LVDS receiver is a pin-compatible replacement. The DS90LV028ATM-TI and the listed DS90LV028ATM/NOPB and DS90LV028ATMX/NOPB order codes belong to the same identified receiver family, but check the exact orderable suffix, package marking, and supply requirements. In particular, do not substitute the DS90LV001TMX or other receiver families without verifying every pin, voltage, threshold, and fail-safe condition.
Place the receiver close to the destination logic so that the CMOS outputs travel only a short distance on the board. Keep LVDS traces away from clocks, switching power nodes, and other high-current paths. Use a solid ground reference beneath the interface and verify the complete transmitter-to-receiver path for reflections, attenuation, and common-mode noise before increasing data rate or adding connector transitions.
معلومات الامتثال
The manufacturer product page confirms the DS90LV028A family, but the supplied material does not explicitly document compliance for the exact DS90LV028ATM-TI order code. Verify the current manufacturer material declaration or exact distributor compliance record.