Texas Instruments

DS90LV028ATM-TI - 400 Mbps Dual LVDS Receiver | TI

Référence : DS90LV028ATM-TI ✓ Actif
350 mV Vdss 8-pin SOIC Package 200 MHz Speed
MOQ : 1 |

DS90LV028ATM-TI Présentation

The Texas Instruments DS90LV028ATM-TI is a dual CMOS differential line receiver designed for low-power, low-noise, high-speed LVDS communication. The device supports data rates in excess of 400 Mbps, equivalent to 200 MHz, and accepts differential input signals with a typical amplitude of 350 mV. The DS90LV028ATM-TI is supplied in an 8-pin SOIC package.

An LVDS receiver is a high-speed interface component that converts a small-amplitude differential signal into a complementary CMOS output. Differential signaling rejects common-mode noise and is used when signal integrity, clock recovery, and data-transfer rate are more important than minimizing the number of interconnects. In the broader electronics hierarchy, the DS90LV028ATM-TI belongs to the interface IC and line-receiver category rather than being a general-purpose logic device.

The receiver is intended for applications requiring ultra-low power dissipation, low noise, and high data rates. Its differential input architecture supports reliable reception over longer board or cable distances than ordinary single-ended CMOS interfaces. Because it is a dual receiver, one device can receive two independent LVDS channels, making it suitable for parallel data links, point-to-point interfaces, and clock-and-data distribution systems.

The 8-pin SOIC package provides a compact surface-mount implementation for industrial, communications, and embedded systems. The receiver converts differential LVDS inputs into CMOS-compatible outputs, allowing the downstream logic to operate with ordinary digital input thresholds. The 400-Mbps capability makes the device relevant to high-speed control links, backplanes, instrumentation, and embedded processor communication where a standard low-speed transceiver would be insufficient.

The DS90LV028ATM-TI should be used when the design requires a dual LVDS input stage and a 3.3 V-class CMOS interface. Layout should preserve controlled differential impedance, minimize stub length, and provide a continuous return path beneath the pair. Input and output decoupling should be placed close to the relevant pins. The component is not a power IC, so SOA information is not applicable.

This product page combines the device function, package characteristics, verified manufacturer information, drop-in replacement guidance, comparison data, and practical PCB design notes for engineers evaluating the DS90LV028ATM-TI.

Alternatives de remplacement direct pour DS90LV028ATM-TI — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

DS90LV028ATM/NOPB

✅ Remplacement direct
📦 8-pin SOIC
Same DS90LV028A dual-receiver family and 8-pin SOIC footprint; orderable suffix and packaging identifier differ

📋 Alternative de référence (hors catalogue)

DS90LV028ATMX/NOPB

✅ Remplacement direct
📦 8-pin SOIC
Same DS90LV028A dual-receiver family and 8-pin SOIC footprint; the M versus M/N order-code treatment differs

📋 Alternative de référence (hors catalogue)

DS90LV028ATM-TI Spécifications

Product Type Dual CMOS differential line receiver
Receiver Configuration 2-channel receiver
Technology Low Voltage Differential Signaling (LVDS)
Maximum Data Rate Greater than 400 Mbps
Equivalent Clock Frequency 200 MHz
Typical Differential Input Voltage 350 mV
Output Interface CMOS
Tension d'alimentation 3 V
Power Dissipation Ultra-low power design
Noise Low-noise receiver design
Boîtier 8-pin SOIC
Type de montage Surface mount

Guide de configuration des broches du DS90LV028ATM-TI 8-pin soic

Configuration des broches du DS90LV028ATM-TI (boîtier 8-pin soic). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 8-pin soic pour le DS90LV028ATM-TI

Aucune donnée de brochage détaillée disponible pour DS90LV028ATM-TI.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

DS90LV028ATM-TI convient pour 6 applications: High-Speed Point-to-Point Data Links, Clock and Data Recovery, Industrial Control and Instrumentation, Embedded Processor Communication, Parallel Bus Interconnect, Low-Power Sensor and Sensor Hub Interface.

🌐

High-Speed Point-to-Point Data Links

The DS90LV028ATM-TI fits point-to-point digital links that must move data faster than ordinary CMOS interfaces while keeping signal count low. Each receiver channel accepts a small differential LVDS signal, with a typical input amplitude of 350 mV, and produces CMOS-compatible outputs for downstream logic. Its data-rate capability in excess of 400 Mbps allows the link to operate at a 200 MHz equivalent clock rate. In a board-to-board implementation, the device can receive two channels while the differential signaling limits susceptibility to common-mode noise. The principal design requirement is controlled impedance and a continuous return path beneath the LVDS pair.

🖥️

Clock and Data Recovery

The DS90LV028ATM-TI is useful when a system must receive a differential clock alongside a data channel. A common LVDS source can drive the two receiver inputs, allowing the recovered CMOS clock and data to enter a controller or programmable logic device on matched board routing. Operation above 400 Mbps provides margin for digital processing and clock distribution. Because the receiver is dual-channel, designers can use one package for clock plus data instead of separate single-channel devices. Timing validation should account for propagation delay, input threshold behavior, and the skew between channels described by the manufacturer timing characteristics.

🏭

Industrial Control and Instrumentation

The DS90LV028ATM-TI can serve as the receiving stage in industrial control equipment where a compact cabinet contains high-speed digital equipment and relatively noisy power or switching systems. Differential LVDS reduces the impact of common-mode disturbance, while the receiver's low-noise and ultra-low-power characteristics suit compact instrumentation. Two receive channels can be assigned to a data bus and a synchronizing signal. The 8-pin SOIC package simplifies assembly into control cards, although the final system must maintain controlled trace geometry and provide local bypass capacitors to prevent supply transients from affecting the CMOS outputs.

🔧

Embedded Processor Communication

The DS90LV028ATM-TI is appropriate for embedded systems that need a low-noise receive interface between an LVDS-speaking peripheral and CMOS logic. A processor or controller can operate from the receiver's CMOS outputs while the external peripheral uses differential signaling for greater noise immunity and edge-rate capability. With throughput above 400 Mbps, the receiver supports demanding parallel data paths, although real system throughput must also account for bus width, protocol overhead, and controller timing. The short 8-pin SOIC package leaves more board area for processing and power components while preserving a standardized small-outline footprint.

🖥️

Parallel Bus Interconnect

The dual-channel DS90LV028ATM-TI can help implement a compact parallel interconnect in which each differential pair carries one data lane or a related clock. Its 200 MHz equivalent clock capability is substantially faster than ordinary low-speed transceiver approaches and can accommodate source-synchronous transfers when transmitter, receiver, and board timing are designed together. Differential routing improves noise immunity compared with single-ended implementations. The receiver should be located close to the destination logic to minimize the unshielded high-speed segment, while input branches and test pads should be arranged so they do not create appreciable impedance discontinuities.

🧩

Low-Power Sensor and Sensor Hub Interface

The DS90LV028ATM-TI can receive high-speed differential data from sensor concentrators, remote sensor nodes, or data-acquisition modules when the interconnect must remain reliable in electrically noisy environments. Its low-power receiver architecture supports compact equipment, while dual channels allow a node to return data and receive commands or a common synchronization signal. The CMOS outputs can feed an embedded MCU, CPLD, or programmable logic without requiring another differential receiver stage. Signal integrity remains the main implementation constraint: use a balanced pair, avoid unnecessary connectors or test branches, and confirm that the transmitter's output levels and termination arrangement match the receiver requirements.

What is the DS90LV028ATM-TI?
The DS90LV028ATM-TI is a Texas Instruments dual CMOS differential line receiver for LVDS links. According to the manufacturer product page, it accepts differential signals with a typical amplitude of 350 mV, translates them into CMOS outputs, supports data rates in excess of 400 Mbps, and is packaged in an 8-pin SOIC.
What is the maximum data rate of DS90LV028ATM-TI?
The DS90LV028ATM-TI supports data rates in excess of 400 Mbps, corresponding to a 200 MHz clock rate. The Texas Instruments product description identifies the part as an LVDS dual receiver designed for high-speed, low-noise operation, making it appropriate for point-to-point digital links and parallel clock-and-data interfaces.
Where can I download the DS90LV028ATM-TI datasheet?
The official Texas Instruments DS90LV028A datasheet is available at https://www.ti.com/lit/gpn/DS90LV028A. The manufacturer product page at https://www.ti.com/product/DS90LV028A provides the device description and supporting technical information. Use the datasheet pin description and recommended-layout sections when assigning PCB nets and checking the 8-pin SOIC footprint.
What is the pinout of DS90LV028ATM-TI?
The DS90LV028ATM-TI uses an 8-pin SOIC package with two LVDS differential input channels and CMOS outputs. The exact numbered pin assignments should be taken from the pin-description table in the official DS90LV028A datasheet. Because the complete numbered pin list is not reproduced on this page, use the manufacturer package drawing and pin table before assigning nets in a PCB layout.
Is DS90LV028ATM-TI suitable for high-speed LVDS communication?
Yes, the DS90LV028ATM-TI is suitable for high-speed LVDS communication. Texas Instruments specifies support for data rates in excess of 400 Mbps and describes the receiver as low-noise and low-power. The dual-channel architecture also allows two differential links to be received with one 8-pin SOIC device, provided the board layout maintains suitable differential signal integrity.
What is the difference between DS90LV028ATM-TI and DS90LV028ATM/NOPB?
DS90LV028ATM-TI and DS90LV028ATM/NOPB identify the same DS90LV028A receiver family in an 8-pin SOIC configuration, but their ordering and packaging identifiers differ. The verified distributor listing identifies DS90LV028ATM/NOPB as a 0/2 LVDS receiver in 8-SOIC. For a replacement, confirm the exact orderable suffix, reel configuration, and manufacturer labeling on the purchasing documentation.
Can DS90LV028ATM/NOPB replace DS90LV028ATM-TI?
DS90LV028ATM/NOPB is the closest same-brand replacement listed for the DS90LV028ATM-TI because both are identified as 0/2 LVDS receivers in an 8-pin SOIC package. The electrical family is the same, but the orderable suffix and packaging treatment differ. Confirm the full ordering code and inspect the incoming-device labeling before using it as a production replacement.
What is the best drop-in replacement for DS90LV028ATM-TI?
DS90LV028ATM/NOPB is the best-supported same-brand drop-in candidate identified in the available cross-reference information. Both parts are listed as dual LVDS receivers in 8-pin SOIC packages. Cross-brand alternatives were not sufficiently documented for a verified pin-to-pin substitution, so validate the exact suffix, package marking, and production requirements before substitution.
DS90LV028ATM-TI vs DS90LV001TMX - which is better for an LVDS receiver?
Choose DS90LV028ATM-TI when the design specifically requires the DS90LV028A dual CMOS LVDS receiver in an 8-pin SOIC package. DS90LV001TMX is a different receiver family, so its pinout, supply requirements, input thresholds, and fail-safe behavior must be checked independently. The available comparison information does not establish that the DS90LV001TMX is a verified pin-to-pin replacement.
When should I choose DS90LV028ATM-TI instead of a generic LVDS receiver?
Choose DS90LV028ATM-TI when a design needs two LVDS inputs, CMOS outputs, operation above 400 Mbps, and an 8-pin SOIC implementation. The manufacturer identifies the device specifically as a low-power, low-noise dual receiver. If the system requires internal fail-safe biasing, different supply levels, another package, or automotive qualification, verify those requirements separately rather than assuming functional equivalence.
Is DS90LV028ATM-TI active or obsolete?
The current Texas Instruments product page lists the DS90LV028A family and its DS90LV028ATMX/NOPB orderable part, indicating that the device family remains supported. The manufacturer also provides a dedicated product page and datasheet link. Confirm the exact DS90LV028ATM-TI order code with the manufacturer or authorized sourcing channel before committing a new production design.
What PCB layout rules apply to DS90LV028ATM-TI LVDS inputs?
Route each LVDS pair as a tightly coupled differential pair with continuous impedance control and an uninterrupted reference plane. Keep stubs and test-point branches short, avoid routing the pair through layer transitions unless the stackup supports balanced geometry, and place decoupling capacitors close to the supply and ground pins. These practices reduce reflections and common-mode-to-differential conversion.
How much power does DS90LV028ATM-TI consume?
The Texas Instruments product description specifically identifies the DS90LV028A as a design for ultra-low power dissipation, but the supplied material does not state a numerical supply-current limit. Use the electrical characteristics table in the official manufacturer datasheet for the exact quiescent and load-current values. Supply-current and power budgets should not be based on an estimated value.
Where can I buy DS90LV028ATM-TI and what is the current price?
Use the Request a Quote form on this page to request current DS90LV028ATM-TI price, stock, and lead time for the exact MPN and packaging requirement. The verified listings confirm that the part is categorized as an 8-SOIC, dual LVDS receiver, but they do not provide an explicit quantity-break price table. A direct quote avoids confusion with base-family order codes such as DS90LV028ATM/NOPB.
Is DS90LV028ATM-TI RoHS and REACH compliant?
The available manufacturer and distributor information confirms the DS90LV028A family and its 8-pin SOIC orderable part, but it does not explicitly state the target suffix's compliance declarations. Consult the current Texas Instruments product page, material declaration, or distributor compliance record for the exact DS90LV028ATM-TI item. Do not infer compliance solely from another order code in the same family.
What are the key specifications of DS90LV028ATM-TI that engineers should know?
The key DS90LV028ATM-TI specifications are dual-channel LVDS reception, CMOS output signaling, a typical differential input amplitude of 350 mV, operation above 400 Mbps, an equivalent 200 MHz clock rate, and an 8-pin SOIC package. According to the Texas Instruments product description, the receiver is optimized for ultra-low power dissipation, low noise, and high-speed links.

Données de référence d'ingénierie pour DS90LV028ATM-TI — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose DS90LV028ATM-TI when the design requires a dual LVDS receiver with CMOS outputs, operation above 400 Mbps, and an 8-pin SOIC footprint. The dual-channel arrangement is useful for clock-and-data links, paired data lanes, and compact industrial interfaces where differential signaling improves noise immunity. DS90LV028ATM/NOPB is the closest listed same-brand orderable alternative and can be considered when its exact suffix, labeling, and procurement requirements match the design. DS90LV028ATMX/NOPB is another same-family order code in the identical package, but it should not be treated as an electrically different substitute. Avoid selecting a receiver solely by channel count or package: check the complete pinout, supply voltage, input thresholds, timing, fail-safe behavior, and operating temperature in the manufacturer datasheet. For a cross-brand replacement, require documented pin-to-pin compatibility rather than relying on broad LVDS equivalence.

Comparaison avec les alternatives

Paramètre Ce produit DS90LV028ATM/NOPB DS90LV028ATMX/NOPB
Brand Texas Instruments Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Device Type Dual CMOS differential line receiver Dual LVDS receiver Dual LVDS receiver
Receiver Configuration 2-channel receiver 0/2 receiver 0/2 receiver
Signal Technology LVDS LVDS LVDS

Principaux différenciateurs

  • Dual high-speed LVDS reception in a compact package (vs DS90LV028ATM/NOPB)
  • Supports data rates in excess of 400 Mbps (vs DS90LV028ATMX/NOPB)
  • Low-noise differential receive architecture (vs DS90LV001TMX)

Notes de conception

Route each LVDS signal as a tightly coupled differential pair on a continuous reference plane. Match the pair geometry to the PCB stackup's intended differential impedance, minimize layer transitions, and keep test pads or unused branches short. Avoid routing one conductor of the pair over a split in the reference plane, because this can create an impedance discontinuity and convert common-mode noise into differential jitter.

Do not assume that every dual LVDS receiver is a pin-compatible replacement. The DS90LV028ATM-TI and the listed DS90LV028ATM/NOPB and DS90LV028ATMX/NOPB order codes belong to the same identified receiver family, but check the exact orderable suffix, package marking, and supply requirements. In particular, do not substitute the DS90LV001TMX or other receiver families without verifying every pin, voltage, threshold, and fail-safe condition.

Place the receiver close to the destination logic so that the CMOS outputs travel only a short distance on the board. Keep LVDS traces away from clocks, switching power nodes, and other high-current paths. Use a solid ground reference beneath the interface and verify the complete transmitter-to-receiver path for reflections, attenuation, and common-mode noise before increasing data rate or adding connector transitions.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The manufacturer product page confirms the DS90LV028A family, but the supplied material does not explicitly document compliance for the exact DS90LV028ATM-TI order code. Verify the current manufacturer material declaration or exact distributor compliance record.

Données vérifiées le : 2026-11-16 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

ds90lv028atm nopb DS90LV028ATM-TI datasheet DS90LV028ATM-TI datasheet pdf DS90LV028ATM-TI pinout DS90LV028ATM-TI equivalent DS90LV028ATM-TI replacement DS90LV028ATM-TI cross reference DS90LV028ATM-TI vs DS90LV001TMX DS90LV028ATM-TI footprint DS90LV028ATM-TI price Texas Instruments DS90LV028ATM-TI DS90LV028A 400 Mbps receiver DS90LV028A LVDS application circuit DS90LV028ATM-TI stock

Composants & termes associés

Texas Instruments DS90LV028ATM-TI DS90LV028ATM/NOPB DS90LV028ATMX/NOPB DS90LV028A LVDS Low Voltage Differential Signaling differential line receiver interface IC CMOS dual receiver 400 Mbps 200 MHz 350 mV differential input 8-pin SOIC SOIC package family surface mount SMD point-to-point data link clock and data recovery industrial instrumentation source-synchronous interface differential impedance signal integrity common-mode noise
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ