Silicon Labs

EFM32G290F64-BGA112 - 32MHz Cortex-M3 64KB MCU | Silicon Labs

MPN: EFM32G290F64-BGA112 ✓ نشط
1.98 V to 3.8 V Vdss 180 microampere/MHz Id 112-BGA (10 mm x 10 mm) Package 32 MHz Speed 64 KB (64K x 8) Memory
الحد الأدنى للطلب: 1 |

EFM32G290F64-BGA112 نظرة عامة

Silicon Labs EFM32G290F64-BGA112 is a 32-bit ARM Cortex-M3 Gecko microcontroller operating up to 32 MHz, with 64 KB of Flash memory, 16 KB of RAM, 90 digital I/O pins, and three 16-bit timers. The device is supplied in a 112-pin BGA package measuring 10 mm by 10 mm. Its low-power architecture, fast wake-up capability, and energy-saving modes target energy-conscious embedded systems.

A microcontroller is a programmable embedded-control component that integrates a processor core, memory, peripherals, and I/O into one semiconductor device. The EFM32G290F64-BGA112 belongs to the EFM32 Gecko family, where the Gecko architecture combines an ARM Cortex-M3 processor with Silicon Labs low-power peripherals. This hierarchy places it within 32-bit microcontrollers, embedded processors, and energy-efficient semiconductor control systems.

Core resources include 64 KB of Flash for firmware and 16 KB of RAM for working data. The device provides 90 digital I/O pins and three 16-bit timers, enabling simultaneous peripheral functions in space-constrained designs. Its operating supply range is 1.98 V to 3.8 V. Silicon Labs emphasizes low power consumption, with the EFM32G family consuming as little as 0.6 microampere in Stop mode and 180 microamperes per megahertz in Run mode.

The ARM Cortex-M3 core provides a 32-bit processing architecture while retaining a compact embedded footprint. Silicon Labs EFM32 devices also feature autonomous peripherals, high analog integration, and energy-management modes that can reduce activity when the processor is not required to run continuously. These characteristics make the MCU suitable for designs in which response time and standby current both matter.

Typical applications include low-power sensor nodes, connected industrial equipment, compact consumer devices, and embedded control modules. The 90-pin interface count supports board-level integration involving communications, timers, analog inputs, and digital control signals. The small 10 mm by 10 mm BGA also supports compact assemblies when careful PCB routing, thermal design, and assembly process control are applied.

Designers should evaluate low-power mode behavior, wake-up requirements, pin multiplexing, and BGA assembly constraints before finalizing the PCB. The manufacturer datasheet should be used to assign every ball and peripheral function. Power routing and decoupling require a stable 1.98 V to 3.8 V supply environment, while firmware should use the documented sleep and Stop-mode entry procedures to achieve the intended energy savings.

This product overview combines the device architecture, memory resources, package information, low-power characteristics, application guidance, and engineering considerations needed to plan an EFM32G290F64-BGA112-based design. It also provides same-package alternatives, specification comparisons, and practical implementation guidance to support component selection and board development.

بدائل مباشرة لـ EFM32G290F64-BGA112 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

EFM32WG290F64-BGA112

✅ بديل مباشر
📦 112-BGA (10 mm x 10 mm)
Adds integrated wireless capability while retaining 64 KB Flash, 16 KB RAM, 32 MHz Cortex-M3, and the 112-BGA package; functional differences require board-level review.

📋 بديل مرجعي (غير موجود في الكتالوج)

EFM32G290F32-BGA112

✅ بديل مباشر
Silicon Labs
📦 112-BGA (10 mm x 10 mm)
32-bit ARM Cortex-M3 microcontroller · EFM32 Gecko · 32 MHz · ARM Cortex-M3 · 32 kB · 8 kB · 90 pins · 3 x 16-bit timers

تواصل لمعرفة السعر

عرض ورقة البيانات ←

EFM32G290F128G-E-BGA112

✅ بديل مباشر
📦 112-BGA (10 mm x 10 mm)
Flash increases from 64 KB to 128 KB (+100%); the E designation identifies a distinct ordering configuration and RAM requires comparison.

📋 بديل مرجعي (غير موجود في الكتالوج)

EFM32G290F64-BGA112 الحدود القصوى والخصائص الكهربائية

Product Type 32-bit ARM Cortex-M3 microcontroller
Series EFM32 Gecko
Processor Core ARM Cortex-M3
أقصى تردد للساعة 32 MHz
Flash Memory 64 KB (64K x 8)
RAM Memory 16 KB
Digital I/O Pins 90 pins
Timer Count 3 timers
Timer Resolution 16-bit
Supply Voltage Range 1.98 V to 3.8 V
Run Mode Current 180 microampere/MHz
Stop Mode Current 0.6 microampere
Architecture 32-bit
العلبة 112-BGA (10 mm x 10 mm)
نوع التركيب Surface Mount
Security Feature AES
Low-Power Modes Sleep and Stop modes

دليل تكوين أطراف EFM32G290F64-BGA112 112-bga (10 mm x 10 mm)

تكوين الأطراف لـ EFM32G290F64-BGA112 (حزمة 112-bga (10 mm x 10 mm)). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 112-bga (10 mm x 10 mm) لـ EFM32G290F64-BGA112

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ EFM32G290F64-BGA112.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

EFM32G290F64-BGA112 مناسب لـ 6 التطبيقs: Battery-Powered Sensor Node, Industrial Control Module, Connected Energy Meter, Compact Consumer Controller, Condition Monitoring Equipment, Low-Power IoT Gateway.

🧩

Battery-Powered Sensor Node

The EFM32G290F64-BGA112 fits compact, duty-cycled sensor nodes because its ARM Cortex-M3 core runs up to 32 MHz while the Gecko platform supports sleep and Stop operation. Silicon Labs specifies the family at as little as 0.6 microampere in Stop mode and 180 microamperes per megahertz in Run mode. The 64 KB of Flash can hold acquisition, filtering, communication, and low-power-management firmware, while 16 KB of RAM supports working buffers. A board designer should use the documented sleep sequence, configure unused peripherals for minimum current, and select the regulator and sensor interface for the measured duty cycle.

🏭

Industrial Control Module

The EFM32G290F64-BGA112 provides the processing, I/O, and timer resources needed for compact industrial control modules. Its 32-bit ARM Cortex-M3 core handles supervisory logic, communications, and real-time decisions, while 90 digital I/O pins support sensors, actuators, interlocks, and status signals. Three 16-bit timers support periodic measurement, motor timing, or pulse-based interface functions, and the 1.98 V to 3.8 V operating range supports compact embedded power systems. Firmware should group functions around the documented peripheral architecture, while the PCB should reserve routing for BGA escape, decoupling, reset, clock stability, and expansion connectors.

🌐

Connected Energy Meter

The EFM32G290F64-BGA112 can serve as the control processor in a connected energy meter where measurement conditioning, calibration, event handling, and communications coexist. The 64 KB Flash accommodates meter firmware and parameter storage, while 16 KB of RAM supports sampled-data buffers and protocol state. Three 16-bit timers are useful for periodic metering or capture functions, and the low-power platform helps separate long idle periods from active measurement. Designers should use the manufacturer reference configuration to align peripheral inputs, clocking, and sleep behavior with metering accuracy and communication timing requirements.

📱

Compact Consumer Controller

The EFM32G290F64-BGA112 is appropriate for compact consumer controllers that combine user inputs, timers, status indicators, and low-power operation. Its 32 MHz Cortex-M3 processor provides responsive control logic, the 90-pin interface allows multiple peripheral connections, and the 10 mm by 10 mm BGA limits board area. The 64 KB Flash and 16 KB RAM are suitable for embedded UI logic, configuration, and protocol handling. Design effort should focus on pin multiplexing, accessible programming and test points, stable BGA assembly, and firmware that minimizes active time to preserve battery life.

🔧

Condition Monitoring Equipment

The EFM32G290F64-BGA112 can coordinate compact condition-monitoring equipment that periodically samples sensors and records local events. Its three 16-bit timers support precise periodic sampling or input capture, and its 16 KB RAM is suitable for short acquisition and processing windows. The low-power architecture permits the controller to remain in a low-current state between measurements, an important benefit for unattended equipment. The implementation should define measurement timing, calibration storage, fault thresholds, and wake behavior in firmware, while separating sensitive analog paths from switching and high-current digital sections of the PCB.

📡

Low-Power IoT Gateway

The EFM32G290F64-BGA112 fits a low-power IoT gateway controller that aggregates local sensor information and manages a compact communication interface. Its 64 KB Flash and 16 KB RAM support protocol state, data buffering, and device-management routines, while three 16-bit timers can coordinate sampling and communication intervals. When the gateway must remain battery-operated, the EFM32G family's Stop-mode capability of 0.6 microampere provides a useful baseline. Wireless designs should evaluate the EFM32WG290F64-BGA112 when integrated radio capability is required and verify the complete board-level pin and regulatory configuration.

ملخص المنتجات الموصى بها

EFM32WG290F64-BGA112 Same-package family option with integrated wireless capability يُستخدم في: Battery-Powered Sensor Node, Connected Energy Meter, Compact Consumer Controller, Low-Power IoT Gateway EFM32G290F128G-E-BGA112 Same-package family option with increased Flash memory يُستخدم في: Battery-Powered Sensor Node, Industrial Control Module, Connected Energy Meter, Condition Monitoring Equipment, Low-Power IoT Gateway EFM32G290F32-BGA112 Silicon Labs يُستخدم في: Industrial Control Module, Compact Consumer Controller, Condition Monitoring Equipment
What are the key specifications of EFM32G290F64-BGA112?
The EFM32G290F64-BGA112 is a 32 MHz ARM Cortex-M3 microcontroller with 64 KB of Flash, 16 KB of RAM, 90 digital I/O pins, three 16-bit timers, and a 112-BGA package. According to the Silicon Labs manufacturer datasheet, the device operates from 1.98 V to 3.8 V. Its Gecko low-power platform supports fast wake-up and energy-saving operation for embedded systems.
Where can I download the EFM32G290F64-BGA112 datasheet PDF?
The official EFM32G datasheet PDF is available from Silicon Labs at https://www.silabs.com/documents/public/data-sheets/efm32g-datasheet.pdf. The manufacturer document covers the EFM32G290F64-BGA112 device, including its ARM Cortex-M3 core, memory configuration, low-power modes, peripherals, electrical characteristics, and package information. Use the device-specific pin and electrical tables for final PCB design.
What is the EFM32G290F64-BGA112 and what is it used for?
The EFM32G290F64-BGA112 is a 32-bit ARM Cortex-M3 Gecko microcontroller designed for low-power embedded applications. It combines a 32 MHz processor, 64 KB of Flash, 16 KB of RAM, 90 digital I/O pins, and three 16-bit timers in a 10 mm by 10 mm BGA package. According to Silicon Labs, these resources support energy-sensitive sensor, industrial, consumer, and connected-device designs.
What is the operating voltage of EFM32G290F64-BGA112?
The EFM32G290F64-BGA112 operates from 1.98 V to 3.8 V. The Silicon Labs manufacturer datasheet identifies this range as the device supply specification, making the MCU appropriate for low-voltage embedded systems with compatible I/O levels. The power design must maintain this range under active, sleep, and stop-mode operating conditions while satisfying the requirements of each connected peripheral.
How much Flash and RAM does EFM32G290F64-BGA112 have?
The EFM32G290F64-BGA112 provides 64 KB of Flash memory and 16 KB of RAM. The Silicon Labs manufacturer datasheet identifies the Flash organization as 64K by 8 bits and the device as a 32-bit ARM Cortex-M3 MCU. This combination supports compact firmware, protocol stacks, calibration data, operating-state storage, and real-time control logic without requiring an external memory device.
How much current does EFM32G290F64-BGA112 use in low-power modes?
The EFM32G290F64-BGA112 can consume as little as 0.6 microampere in Stop mode, while the EFM32G family is specified at 180 microamperes per megahertz in Run mode. According to the Silicon Labs manufacturer datasheet, these values demonstrate the platform's low-power design. Actual product consumption depends on clock settings, active peripherals, I/O activity, and the selected firmware sleep strategy.
What can replace the EFM32G290F64-BGA112?
The closest documented same-package options are the EFM32WG290F64-BGA112, EFM32G290F32-BGA112, and EFM32G290F128G-E-BGA112. Each uses the EFM32G290 Gecko platform and 112-BGA form factor, but memory capacity and wireless capability differ. Firmware, peripheral configuration, memory requirements, and regulatory approvals must be reviewed before any replacement is treated as a production drop-in.
Can EFM32WG290F64-BGA112 replace EFM32G290F64-BGA112?
The EFM32WG290F64-BGA112 is the closest same-package replacement because it retains 64 KB of Flash, 16 KB of RAM, a 32 MHz Cortex-M3 core, and the 112-BGA format. Its principal engineering addition is integrated wireless capability. The Silicon Labs product-family information must still be checked for peripheral configuration and board-level compatibility before substitution.
When should I choose EFM32G290F64-BGA112 instead of EFM32G290F32-BGA112?
Choose the EFM32G290F64-BGA112 when firmware and working-data requirements exceed the EFM32G290F32-BGA112's 32 KB of Flash and 8 KB of RAM. The target device doubles both memory resources to 64 KB of Flash and 16 KB of RAM while retaining the same 32 MHz Cortex-M3 family and 112-BGA package. This makes it the better choice for larger protocol stacks, more complex control logic, or greater application-data storage.
Is EFM32G290F64-BGA112 suitable for battery-powered sensor applications?
The EFM32G290F64-BGA112 is suitable for battery-powered sensing systems because its Gecko platform supports low-current Stop and sleep operation. According to the Silicon Labs manufacturer datasheet, Stop current can reach 0.6 microampere, while Run current is characterized at 180 microamperes per megahertz. Actual battery life depends on wake frequency, radio activity, sensor duty cycle, leakage, and regulator efficiency.
Where is the EFM32G290F64-BGA112 pinout located?
The authoritative EFM32G290F64-BGA112 pinout is located in the Silicon Labs EFM32G manufacturer datasheet and the device's official product documentation. Use the 112-BGA ball table to identify power, ground, reset, clock, debug, analog, and digital I/O assignments. The package is 10 mm by 10 mm, so accurate assembly and escape routing depend on the manufacturer land pattern.
How is the EFM32G290F64-BGA112 different from the EFM32G290F128G-E-BGA112?
The EFM32G290F64-BGA112 has 64 KB of Flash and 16 KB of RAM, whereas the EFM32G290F128G-E-BGA112 provides 128 KB of Flash. Both belong to the 32 MHz ARM Cortex-M3 EFM32G290 family and use a 112-BGA package. The larger-memory device is preferable when code or data storage is the limiting factor, while the target device may reduce board cost and simplify memory planning.
Where can I buy EFM32G290F64-BGA112 online?
Use the Request a Quote form on this page to request EFM32G290F64-BGA112 availability, current lead time, minimum order quantity, and shipment options. The form connects the request with XAIPART's component sourcing workflow and is the appropriate route for a quote that reflects the exact 112-BGA ordering configuration. Package, quantity, and target delivery date should be included.
What is the price of EFM32G290F64-BGA112?
Current EFM32G290F64-BGA112 pricing depends on order quantity, package configuration, availability, and delivery requirements. Submit the part number and required quantity through the Request a Quote form on this page for a current quotation. This avoids presenting a stale price and allows the request to reflect the exact package suffix and procurement volume.
What is the lead time and stock status of EFM32G290F64-BGA112?
Request the current EFM32G290F64-BGA112 lead time and stock status through the Request a Quote form on this page. Because supply can change with order volume and manufacturing conditions, the manufacturer and distribution channels should be checked against the requested quantity. Include the target delivery date and whether multiple production lots are required.

بيانات مرجعية هندسية لـ EFM32G290F64-BGA112 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the EFM32G290F64-BGA112 when a compact, low-power design needs a 32 MHz Cortex-M3 core, 64 KB of Flash, 16 KB of RAM, 90 digital I/O pins, and three 16-bit timers in a 112-BGA package. Select EFM32WG290F64-BGA112 when the same computational and memory resources are needed but integrated wireless capability is required. Choose EFM32G290F32-BGA112 only when its 32 KB Flash and 8 KB RAM are sufficient; its memory is 50% below the target in both categories. Choose EFM32G290F128G-E-BGA112 when 128 KB of Flash supports larger firmware or data requirements, while confirming its ordering configuration and peripheral compatibility. In every case, validate the manufacturer pin table, power design, boot behavior, firmware memory map, and BGA assembly process rather than relying on package similarity alone.

المقارنة مع البدائل

المعامل هذا المنتج EFM32WG290F64-BGA112 EFM32G290F32-BGA112 EFM32G290F128G-E-BGA112
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 112-BGA (10 mm x 10 mm) 112-BGA (10 mm x 10 mm) 112-BGA (10 mm x 10 mm) 112-BGA (10 mm x 10 mm)
Flash Memory 64 KB 64 KB 32 KB (-50%) 128 KB (+100%)

أبرز الفروقات

  • Balanced memory configuration (مقابلEFM32G290F32-BGA112)
  • Wireless-capable family option (مقابلEFM32WG290F64-BGA112)
  • More firmware space than the target (مقابلEFM32G290F128G-E-BGA112)

ملاحظات التصميم

Design the supply network for the documented 1.98 V to 3.8 V operating range. Place local high-frequency bypass capacitors close to the device power balls, provide a low-impedance ground reference, and separate noisy switching or radio circuitry from sensitive analog routes. Energy-sensitive firmware should use the manufacturer's documented Sleep and Stop procedures, disable unused peripherals, and measure the complete board because regulator efficiency and leakage can dominate the MCU's specified current.

Treat the 10 mm by 10 mm 112-BGA as a fine-pitch assembly constraint. Follow the manufacturer land pattern, preserve pad-to-mask and solder-mask definitions, and account for thermal-via requirements under the device. Provide inspection access for hidden joints and use a board profile that supports the assembly process. BGA rework also requires controlled heating and component-specific handling to avoid package cracking or ball detachment.

Assign pins directly from the EFM32G manufacturer datasheet before schematic capture. Route the clock and reset networks according to the reference guidance, keep switching loops compact, and isolate analog inputs from digital clocks and high-current outputs. The 90 available digital I/O pins do not imply 90 simultaneously usable pins because alternate functions, power pins, ground connections, reserved balls, and boot or debug functions constrain the usable assignment.

A common error is treating a same-package memory variant as automatically interchangeable. The EFM32G290F32-BGA112 has only 32 KB of Flash and 8 KB of RAM, so existing firmware may exceed its memory image even though the package is unchanged. The EFM32G290F128G-E-BGA112 provides 128 KB of Flash but represents a different ordering configuration. Review linker placement, peripheral settings, boot behavior, and board assembly requirements before replacing the target MPN.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

No specific compliance declarations for this exact ordering configuration were identified in the manufacturer page or manufacturer datasheet excerpts.

تم التحقق من البيانات في: 2026-11-10 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

EFM32G290F64-BGA112 datasheet EFM32G290F64-BGA112 specifications EFM32G290F64-BGA112 pinout EFM32G290F64-BGA112 datasheet pdf EFM32G290F64-BGA112 equivalent EFM32G290F64-BGA112 replacement EFM32G290F64-BGA112 cross reference EFM32G290F64-BGA112 footprint EFM32G290F64-BGA112 price Silicon Labs EFM32G290F64-BGA112 EFM32G290F64-BGA112 vs EFM32WG290F64-BGA112 EFM32G290F64-BGA112 application circuit

المكونات والمصطلحات ذات الصلة

Silicon Labs EFM32G290F64-BGA112 EFM32WG290F64-BGA112 EFM32G290F32-BGA112 EFM32G290F128G-E-BGA112 EFM32 Gecko ARM Cortex-M3 32-bit microcontroller embedded microcontroller low-power microcontroller semiconductor 112-BGA BGA package surface-mount package 64 KB Flash 16 KB RAM 90 digital I/O pins 16-bit timer 1.98 V to 3.8 V Stop mode Sleep mode AES IoT industrial control
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر