EFM32G290F64-BGA112 - 32MHz Cortex-M3 64KB MCU | Silicon Labs
MPN: EFM32G290F64-BGA112 ✓ فعالEFM32G290F64-BGA112 جائزہ
A microcontroller is a programmable embedded-control component that integrates a processor core, memory, peripherals, and I/O into one semiconductor device. The EFM32G290F64-BGA112 belongs to the EFM32 Gecko family, where the Gecko architecture combines an ARM Cortex-M3 processor with Silicon Labs low-power peripherals. This hierarchy places it within 32-bit microcontrollers, embedded processors, and energy-efficient semiconductor control systems.
Core resources include 64 KB of Flash for firmware and 16 KB of RAM for working data. The device provides 90 digital I/O pins and three 16-bit timers, enabling simultaneous peripheral functions in space-constrained designs. Its operating supply range is 1.98 V to 3.8 V. Silicon Labs emphasizes low power consumption, with the EFM32G family consuming as little as 0.6 microampere in Stop mode and 180 microamperes per megahertz in Run mode.
The ARM Cortex-M3 core provides a 32-bit processing architecture while retaining a compact embedded footprint. Silicon Labs EFM32 devices also feature autonomous peripherals, high analog integration, and energy-management modes that can reduce activity when the processor is not required to run continuously. These characteristics make the MCU suitable for designs in which response time and standby current both matter.
Typical applications include low-power sensor nodes, connected industrial equipment, compact consumer devices, and embedded control modules. The 90-pin interface count supports board-level integration involving communications, timers, analog inputs, and digital control signals. The small 10 mm by 10 mm BGA also supports compact assemblies when careful PCB routing, thermal design, and assembly process control are applied.
Designers should evaluate low-power mode behavior, wake-up requirements, pin multiplexing, and BGA assembly constraints before finalizing the PCB. The manufacturer datasheet should be used to assign every ball and peripheral function. Power routing and decoupling require a stable 1.98 V to 3.8 V supply environment, while firmware should use the documented sleep and Stop-mode entry procedures to achieve the intended energy savings.
This product overview combines the device architecture, memory resources, package information, low-power characteristics, application guidance, and engineering considerations needed to plan an EFM32G290F64-BGA112-based design. It also provides same-package alternatives, specification comparisons, and practical implementation guidance to support component selection and board development.
کے لیے ڈراپ اِن متبادل EFM32G290F64-BGA112 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
EFM32WG290F64-BGA112
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
EFM32G290F32-BGA112
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EFM32G290F128G-E-BGA112
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
EFM32G290F64-BGA112 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | EFM32 Gecko |
| Processor Core | ARM Cortex-M3 |
| زیادہ سے زیادہ کلاک فریکوئنسی | 32 MHz |
| Flash Memory | 64 KB (64K x 8) |
| RAM Memory | 16 KB |
| Digital I/O Pins | 90 pins |
| Timer Count | 3 timers |
| Timer Resolution | 16-bit |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Run Mode Current | 180 microampere/MHz |
| Stop Mode Current | 0.6 microampere |
| Architecture | 32-bit |
| پیکیج | 112-BGA (10 mm x 10 mm) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Security Feature | AES |
| Low-Power Modes | Sleep and Stop modes |
EFM32G290F64-BGA112 112-bga (10 mm x 10 mm) پن کنفیگریشن گائیڈ
EFM32G290F64-BGA112 (112-bga (10 mm x 10 mm) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں EFM32G290F64-BGA112.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
EFM32G290F64-BGA112 کے لیے موزوں ہے 6 ایپلیکیشنs: Battery-Powered Sensor Node, Industrial Control Module, Connected Energy Meter, Compact Consumer Controller, Condition Monitoring Equipment, Low-Power IoT Gateway.
Battery-Powered Sensor Node
The EFM32G290F64-BGA112 fits compact, duty-cycled sensor nodes because its ARM Cortex-M3 core runs up to 32 MHz while the Gecko platform supports sleep and Stop operation. Silicon Labs specifies the family at as little as 0.6 microampere in Stop mode and 180 microamperes per megahertz in Run mode. The 64 KB of Flash can hold acquisition, filtering, communication, and low-power-management firmware, while 16 KB of RAM supports working buffers. A board designer should use the documented sleep sequence, configure unused peripherals for minimum current, and select the regulator and sensor interface for the measured duty cycle.
تجویز کردہ
Industrial Control Module
The EFM32G290F64-BGA112 provides the processing, I/O, and timer resources needed for compact industrial control modules. Its 32-bit ARM Cortex-M3 core handles supervisory logic, communications, and real-time decisions, while 90 digital I/O pins support sensors, actuators, interlocks, and status signals. Three 16-bit timers support periodic measurement, motor timing, or pulse-based interface functions, and the 1.98 V to 3.8 V operating range supports compact embedded power systems. Firmware should group functions around the documented peripheral architecture, while the PCB should reserve routing for BGA escape, decoupling, reset, clock stability, and expansion connectors.
تجویز کردہ
Connected Energy Meter
The EFM32G290F64-BGA112 can serve as the control processor in a connected energy meter where measurement conditioning, calibration, event handling, and communications coexist. The 64 KB Flash accommodates meter firmware and parameter storage, while 16 KB of RAM supports sampled-data buffers and protocol state. Three 16-bit timers are useful for periodic metering or capture functions, and the low-power platform helps separate long idle periods from active measurement. Designers should use the manufacturer reference configuration to align peripheral inputs, clocking, and sleep behavior with metering accuracy and communication timing requirements.
تجویز کردہ
Compact Consumer Controller
The EFM32G290F64-BGA112 is appropriate for compact consumer controllers that combine user inputs, timers, status indicators, and low-power operation. Its 32 MHz Cortex-M3 processor provides responsive control logic, the 90-pin interface allows multiple peripheral connections, and the 10 mm by 10 mm BGA limits board area. The 64 KB Flash and 16 KB RAM are suitable for embedded UI logic, configuration, and protocol handling. Design effort should focus on pin multiplexing, accessible programming and test points, stable BGA assembly, and firmware that minimizes active time to preserve battery life.
تجویز کردہ
Condition Monitoring Equipment
The EFM32G290F64-BGA112 can coordinate compact condition-monitoring equipment that periodically samples sensors and records local events. Its three 16-bit timers support precise periodic sampling or input capture, and its 16 KB RAM is suitable for short acquisition and processing windows. The low-power architecture permits the controller to remain in a low-current state between measurements, an important benefit for unattended equipment. The implementation should define measurement timing, calibration storage, fault thresholds, and wake behavior in firmware, while separating sensitive analog paths from switching and high-current digital sections of the PCB.
تجویز کردہ
Low-Power IoT Gateway
The EFM32G290F64-BGA112 fits a low-power IoT gateway controller that aggregates local sensor information and manages a compact communication interface. Its 64 KB Flash and 16 KB RAM support protocol state, data buffering, and device-management routines, while three 16-bit timers can coordinate sampling and communication intervals. When the gateway must remain battery-operated, the EFM32G family's Stop-mode capability of 0.6 microampere provides a useful baseline. Wireless designs should evaluate the EFM32WG290F64-BGA112 when integrated radio capability is required and verify the complete board-level pin and regulatory configuration.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا EFM32G290F64-BGA112 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | EFM32WG290F64-BGA112 | EFM32G290F32-BGA112 | EFM32G290F128G-E-BGA112 |
|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 112-BGA (10 mm x 10 mm) | 112-BGA (10 mm x 10 mm) | 112-BGA (10 mm x 10 mm) | 112-BGA (10 mm x 10 mm) |
| Flash Memory | 64 KB | 64 KB | 32 KB (-50%) | 128 KB (+100%) |
اہم امتیازی خصوصیات
- Balanced memory configuration (بمقابلہEFM32G290F32-BGA112)
- Wireless-capable family option (بمقابلہEFM32WG290F64-BGA112)
- More firmware space than the target (بمقابلہEFM32G290F128G-E-BGA112)
ڈیزائن نوٹس
Design the supply network for the documented 1.98 V to 3.8 V operating range. Place local high-frequency bypass capacitors close to the device power balls, provide a low-impedance ground reference, and separate noisy switching or radio circuitry from sensitive analog routes. Energy-sensitive firmware should use the manufacturer's documented Sleep and Stop procedures, disable unused peripherals, and measure the complete board because regulator efficiency and leakage can dominate the MCU's specified current.
Treat the 10 mm by 10 mm 112-BGA as a fine-pitch assembly constraint. Follow the manufacturer land pattern, preserve pad-to-mask and solder-mask definitions, and account for thermal-via requirements under the device. Provide inspection access for hidden joints and use a board profile that supports the assembly process. BGA rework also requires controlled heating and component-specific handling to avoid package cracking or ball detachment.
Assign pins directly from the EFM32G manufacturer datasheet before schematic capture. Route the clock and reset networks according to the reference guidance, keep switching loops compact, and isolate analog inputs from digital clocks and high-current outputs. The 90 available digital I/O pins do not imply 90 simultaneously usable pins because alternate functions, power pins, ground connections, reserved balls, and boot or debug functions constrain the usable assignment.
A common error is treating a same-package memory variant as automatically interchangeable. The EFM32G290F32-BGA112 has only 32 KB of Flash and 8 KB of RAM, so existing firmware may exceed its memory image even though the package is unchanged. The EFM32G290F128G-E-BGA112 provides 128 KB of Flash but represents a different ordering configuration. Review linker placement, peripheral settings, boot behavior, and board assembly requirements before replacing the target MPN.
تعمیل کی معلومات
No specific compliance declarations for this exact ordering configuration were identified in the manufacturer page or manufacturer datasheet excerpts.