Silicon Labs

EFM32WG942F64-QFP64 - 48MHz Cortex-M4F MCU | Silicon Labs

MPN: EFM32WG942F64-QFP64 ✓ نشط
1.98 V to 3.8 V Vdss 64-pin TQFP, 10 mm x 10 mm Package 48 MHz Speed 64 KB Memory
الحد الأدنى للطلب: 1 |

EFM32WG942F64-QFP64 نظرة عامة

Silicon Labs EFM32WG942F64-QFP64 is a 32-bit ARM Cortex-M4F Wonder Gecko microcontroller operating at 48 MHz, with 64 KB of flash memory and 32 KB of SRAM, in a 64-pin TQFP package. It combines a high-performance Cortex-M4F processor with low-power operation, flexible peripherals, and integrated connectivity options for compact embedded systems.

A microcontroller is a programmable semiconductor that integrates a CPU core, memory, clock circuitry, and peripherals such as GPIO, timers, serial interfaces, and analog blocks. The EFM32 Wonder Gecko family belongs to the broader hierarchy of embedded processors, 32-bit microcontrollers, and mixed-signal semiconductors designed for industrial, consumer, communications, and IoT equipment.

The EFM32WG942F64-QFP64 supports operation from a 1.98 V to 3.8 V supply range and combines 48 MHz processing performance with 64 KB of flash. Its 32-bit architecture provides greater addressing capability and computational headroom than many 8-bit or 16-bit control solutions. The 64-pin TQFP package also provides access to a broad selection of GPIO and peripheral functions while supporting conventional surface-mount assembly.

Silicon Labs designs the Wonder Gecko family around an ARM Cortex-M4F core with floating-point capability and energy-focused peripherals. Low-power modes are important in battery-operated equipment because they allow the processor and unused peripherals to remain idle without continuously consuming active processing power. The combination of performance, memory, and power management supports responsive control systems without requiring a separate processor for every measurement or communication function.

Typical applications include industrial sensor nodes, building automation controllers, portable measurement equipment, connected accessories, low-power IoT devices, and embedded monitoring systems. The device is particularly suitable when local control, serial communications, and compact PCB integration are required within a single microcontroller rather than a combination of processor, memory, and discrete interface components.

Circuit design should account for the complete pin configuration, decoupling requirements, clock strategy, boot mode, and programming interface before layout. Because the QFP64 package exposes many signals, maintain short return paths for supply and ground, place bypass capacitors close to their associated supply pins, and follow the manufacturer datasheet for the exact pin assignments and alternate functions.

This product record combines the core MCU specifications, package details, verified drop-in alternatives, application guidance, and design considerations needed for initial engineering evaluation. Final firmware behavior, peripheral routing, and production programming should be validated against the current Silicon Labs datasheet and the selected board-level design.

بدائل مباشرة لـ EFM32WG942F64-QFP64 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

EFM32WG942F64-B-QFP64

✅ بديل مباشر
📦 64-TQFP (10x10 mm)
Same 48 MHz Cortex-M4F performance, 64 KB flash, 32 KB SRAM, and 1.98 V to 3.8 V supply range; ordering suffix differs by 0% in these listed ratings.

📋 بديل مرجعي (غير موجود في الكتالوج)

EFM32WG842F64-QFP64T

✅ بديل مباشر
📦 64-TQFP (10x10 mm)
Matches the 48 MHz operating speed and 64 KB flash capacity, both 0% different from the target; peripheral configuration and ordering suffix require validation.

📋 بديل مرجعي (غير موجود في الكتالوج)

EFM32WG942F64-QFP64 الحدود القصوى والخصائص الكهربائية

Product Type 32-bit ARM Cortex-M4F microcontroller
Series EFM32 Wonder Gecko
Maximum CPU Frequency 48 MHz
Flash Memory 64 KB
Flash Organization 64K x 8 bits
SRAM 32 KB
Supply Voltage Range 1.98 V to 3.8 V
CPU Core ARM Cortex-M4F
Instruction Width 32 bit
العلبة 64-pin TQFP, 10 mm x 10 mm
نوع التركيب Surface mount
حالة RoHS unknown
REACH Status unknown

دليل تكوين أطراف EFM32WG942F64-QFP64 64-pin tqfp, 10 mm x 10 mm

تكوين الأطراف لـ EFM32WG942F64-QFP64 (حزمة 64-pin tqfp, 10 mm x 10 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 64-pin tqfp, 10 mm x 10 mm لـ EFM32WG942F64-QFP64

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ EFM32WG942F64-QFP64.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

EFM32WG942F64-QFP64 مناسب لـ 6 التطبيقs: Industrial Sensor Nodes, Building Automation Controllers, Portable Measurement Equipment, Low-Power IoT Devices, Connected Consumer Accessories, Embedded Monitoring Systems.

🏭

Industrial Sensor Nodes

The EFM32WG942F64-QFP64 fits industrial sensor nodes that combine local signal conditioning, control logic, and serial communications in a single component. Its 48 MHz Cortex-M4F core provides processing headroom for filtering and control algorithms, while 64 KB of flash supports embedded firmware and 32 KB of SRAM supports working buffers. The 1.98 V to 3.8 V operating range fits low-voltage sensor systems. Use the device with suitable analog front-end circuitry and configure unused peripherals for low power when the node operates on a limited energy budget.

🏠

Building Automation Controllers

The EFM32WG942F64-QFP64 is suitable for building automation controllers that coordinate sensors, actuators, communication interfaces, and local logic. Its 64-pin TQFP package provides a practical pin count for systems requiring several peripheral connections, while the 48 MHz Cortex-M4F core can support protocol processing alongside control tasks. The 32 KB SRAM helps manage packet buffers and application state. Firmware should use the low-power peripherals between building-control events to avoid unnecessary active-state consumption.

🔧

Portable Measurement Equipment

The EFM32WG942F64-QFP64 can serve as the control processor in portable instrumentation where measurement acquisition, display support, data logging, and USB or serial communication must fit a limited board area. Its 48 MHz Cortex-M4F core and 32-bit architecture support responsive digital filtering, while 64 KB of flash stores application firmware. The low 1.98 V to 3.8 V supply range simplifies integration with battery-derived rails. A portable design should pair the MCU with precision analog front ends and use measured supply-current data to balance response time against battery life.

🧩

Low-Power IoT Devices

The EFM32WG942F64-QFP64 is appropriate for compact IoT devices that need more local processing than a simple sensor interface but must maintain conservative energy use. Its Cortex-M4F core runs at up to 48 MHz for protocol handling and edge logic, and its 64 KB flash and 32 KB SRAM eliminate much of the external memory normally required. The device can remain in a suitable sleep state between data transfers. Firmware should explicitly disable unused peripherals and select clock modes that match the required wake-up latency.

📱

Connected Consumer Accessories

The EFM32WG942F64-QFP64 fits connected consumer accessories that combine local interaction logic with serial data exchange. A 48 MHz ARM Cortex-M4F processor can handle protocol state machines, user-interface tasks, and accessory control, while 32 KB of SRAM accommodates communication buffers. Its 64-pin TQFP footprint simplifies access to a broad mix of GPIO and peripheral signals compared with smaller lead-count packages. The 3.8 V maximum supply supports integration into common 3.3 V systems, subject to transient and accuracy requirements at the device pins.

📺

Embedded Monitoring Systems

The EFM32WG942F64-QFP64 is well suited to embedded monitoring systems that must continuously monitor inputs and report status through a wired or wireless interface. The Cortex-M4F core provides enough throughput for sampling schedules, filtering, fault detection, and protocol formatting at 48 MHz. Its 64 KB flash stores firmware and configuration, and the 32 KB SRAM supports sample queues and communications buffers. Designers should use the timer and sleep modes to establish deterministic sampling intervals while keeping radio or communication circuitry active only when required.

ملخص المنتجات الموصى بها

EFM32WG942F64-QFP64 Silicon Labs يُستخدم في: Industrial Sensor Nodes, Building Automation Controllers, Portable Measurement Equipment, Low-Power IoT Devices, Connected Consumer Accessories, Embedded Monitoring Systems EFM32WG942F64-B-QFP64 Pin-compatible ordering variant يُستخدم في: Industrial Sensor Nodes, Portable Measurement Equipment, Connected Consumer Accessories EFM32WG842F64-QFP64T Related 64-pin control MCU يُستخدم في: Building Automation Controllers, Low-Power IoT Devices, Embedded Monitoring Systems
What is the EFM32WG942F64-QFP64?
The EFM32WG942F64-QFP64 is a 32-bit ARM Cortex-M4F Wonder Gecko microcontroller from Silicon Labs, operating at up to 48 MHz with 64 KB of flash memory and 32 KB of SRAM. According to the Silicon Labs datasheet, it is intended for low-power embedded applications requiring integrated control, communications, analog measurement, and general-purpose processing. The device is supplied in a 64-pin TQFP package measuring 10 mm by 10 mm.
What are the key specifications of EFM32WG942F64-QFP64 that engineers should know?
The principal specifications of the EFM32WG942F64-QFP64 are a 48 MHz maximum clock, 32-bit ARM Cortex-M4F core, 64 KB flash, 32 KB SRAM, and 1.98 V to 3.8 V supply range. According to the Silicon Labs datasheet, it also provides extensive serial, analog, timing, and communication peripherals. Its 64-pin TQFP package exposes substantially more interface options than a small-package microcontroller, making it suitable for boards requiring several external connections.
What is the operating voltage of EFM32WG942F64-QFP64?
The EFM32WG942F64-QFP64 operates from 1.98 V to 3.8 V. According to the Silicon Labs datasheet, this range supports low-voltage embedded systems while allowing designers to choose the appropriate operating point for processing performance, memory, and peripheral activity. The supply design must maintain the required voltage at the MCU power pins under transient conditions and provide local bypass capacitance as directed in the datasheet.
Where can I download the EFM32WG942F64-QFP64 datasheet PDF?
The EFM32WG942F64-QFP64 datasheet is available through the document link listed for this product. The datasheet identifies the Cortex-M4F core, 48 MHz maximum operating frequency, 64 KB flash, 32 KB SRAM, power specifications, peripheral functions, and the complete QFP64 connection diagram. Use that document when assigning pins because several alternate-function assignments and package details must be confirmed before the PCB is released.
Where can I find the EFM32WG942F64-QFP64 pinout?
The EFM32WG942F64-QFP64 pinout is defined by the package connection diagram and pin-description table in the Silicon Labs datasheet. The device uses a 64-pin TQFP package, and its pins provide power, ground, debug, communications, analog, and general-purpose I/O functions. Use the manufacturer pin table when planning routing because peripheral signals can have alternate functions and board programming requirements may constrain dedicated debug and reset pins.
Is EFM32WG942F64-QFP64 suitable for IoT and sensor applications?
Yes, the EFM32WG942F64-QFP64 is suitable for IoT and sensor applications that require a 48 MHz Cortex-M4F processor, 32 KB SRAM, and low-voltage operation. Its combination of embedded memory and integrated peripherals can reduce the number of discrete components in a sensing node. For a low-power deployment, firmware should disable unused peripherals, enter an appropriate sleep mode between measurements, and select the clock configuration that matches the required response time.
EFM32WG942F64-QFP64 vs EFM32WG942F64-B-QFP64: which one should I choose?
The two parts share the same EFM32WG942F64 device identity, 48 MHz Cortex-M4F performance, 64 KB flash, 32 KB SRAM, and 64-pin TQFP package, so the selection should follow the ordering-code definition in the manufacturer documentation. According to the manufacturer datasheet information for the -B variant, its key listed electrical figures remain 48 MHz operation, 64 KB flash, and a 1.98 V to 3.8 V supply range. Confirm the exact temperature, marking, and orderable suffix requirements before substitution.
When should I choose EFM32WG942F64-QFP64 instead of EFM32WG842F64-QFP64?
Choose the EFM32WG942F64-QFP64 when its Wonder Gecko feature set and peripheral configuration are required by the design; the EFM32WG842F64-QFP64 is the closer 48 MHz, 64 KB flash member associated with the 64-pin TQFP family. Both parts use the same core speed and flash capacity, so a final decision depends on the peripheral map, communication features, device identifier, and validated pin compatibility. Confirm the manufacturer comparison before treating one as a direct replacement.
What can replace EFM32WG942F64-QFP64?
The closest identified replacement is EFM32WG942F64-B-QFP64 because it retains the EFM32WG942F64 device configuration in the same 64-pin TQFP package, with 48 MHz operation, 64 KB flash, and a 1.98 V to 3.8 V supply range. Before replacing the component, verify the ordering suffix, temperature grade, pin functions, firmware compatibility, and programming requirements. A package match alone does not establish complete drop-in suitability.
Is EFM32WG942F64-QFP64 the same as EFM32WG842F64-QFP64?
No. The EFM32WG942F64-QFP64 and EFM32WG842F64-QFP64 are related 64-pin TQFP microcontrollers with 48 MHz performance and 64 KB flash, but the WG942 and WG842 device identifiers indicate different device configurations. According to the manufacturer device information, their peripheral and feature sets must be compared before one is substituted for the other. Firmware, pin multiplexing, and peripheral availability may differ even when the package and headline memory figures match.
What is the best Silicon Labs equivalent for EFM32WG942F64-QFP64?
The best identified Silicon Labs equivalent is EFM32WG942F64-B-QFP64 because it preserves the same EFM32WG942F64 base configuration and 64-pin TQFP package. It is listed with the same 48 MHz Cortex-M4F speed, 64 KB flash, and 1.98 V to 3.8 V operating range. The ordering suffix can still affect commercial or grade requirements, so engineers should validate the complete ordering code against the manufacturer datasheet and their production specification.
Where can I buy EFM32WG942F64-QFP64 online?
Use the Request a Quote form on this page to request EFM32WG942F64-QFP64 availability, lead time, and order quantities. The form allows buyers to specify the required package, quantity, and delivery information without relying on a static marketplace price. For production planning, request the current lifecycle and supply status at the time of quotation because component availability can change independently of the device documentation.
What is the price of EFM32WG942F64-QFP64?
Submit the Request a Quote form on this page for the current EFM32WG942F64-QFP64 quotation. Pricing depends on order quantity, package form, delivery terms, and current channel availability, so a static amount would not accurately represent the purchasing options. The form supports quantity-based review and provides a direct response for procurement without requiring buyers to rely on an unverified historical price.
What is the lead time and stock status for EFM32WG942F64-QFP64?
Request the current lead time and stock status through the Request a Quote form on this page. The form records the requested EFM32WG942F64-QFP64 quantity and delivery requirements so procurement can confirm present supply without relying on an outdated inventory statement. For new designs, also request confirmation of the lifecycle status and manufacturing roadmap because those details are separate from short-term distributor inventory.
Is EFM32WG942F64-QFP64 in stock?
The Request a Quote form on this page is the appropriate channel for checking current EFM32WG942F64-QFP64 stock and lead time. Enter the required quantity and shipment destination to receive an availability response. This avoids presenting a potentially stale stock statement and allows procurement to distinguish complete-device stock from assembled, programmed, or long-lead-time supply arrangements.
How should the EFM32WG942F64-QFP64 power supply be designed?
Design the EFM32WG942F64-QFP64 power rail to remain within 1.98 V to 3.8 V under startup, active processing, and peripheral load transients. According to the Silicon Labs datasheet, local supply bypassing and correct grounding are essential to low-noise operation. Place the required capacitors close to the associated power pins, provide adequate source impedance at the MCU, and verify startup behavior with the chosen regulator and load configuration on hardware.

بيانات مرجعية هندسية لـ EFM32WG942F64-QFP64 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose EFM32WG942F64-QFP64 when the design specifically calls for the WG942 Wonder Gecko configuration, 48 MHz Cortex-M4F processing, 64 KB flash, 32 KB SRAM, and a 64-pin TQFP footprint. EFM32WG942F64-B-QFP64 is the closest identified replacement because its listed memory, speed, supply range, and package match; nevertheless, verify the ordering suffix and production-grade requirements before releasing it. Consider EFM32WG842F64-QFP64T only after confirming that its peripheral map, device identifier, memory arrangement, and firmware requirements are acceptable. Neither related family member should replace the target merely because it has 64 pins, 48 MHz operation, and 64 KB flash. For new designs, evaluate the current manufacturer documentation, toolchain support, programming process, lifecycle status, and long-term availability alongside the electrical specifications.

المقارنة مع البدائل

المعامل هذا المنتج EFM32WG942F64-B-QFP64 EFM32WG842F64-QFP64T
Brand Silicon Labs Silicon Labs Silicon Labs
Package 64-TQFP (10x10 mm) 64-TQFP (10x10 mm) 64-TQFP
Product Family Wonder Gecko Wonder Gecko Wonder Gecko
CPU Core ARM Cortex-M4F ARM Cortex-M4F ARM Cortex-M4F
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz
Flash Memory 64 KB 64 KB 64 KB
Ordering Suffix EFM32WG942F64-QFP64 EFM32WG942F64-B-QFP64 EFM32WG842F64-QFP64T

أبرز الفروقات

  • Closest identified replacement preserves the full base device configuration (مقابلEFM32WG942F64-B-QFP64)
  • Related alternative matches the headline compute and memory configuration (مقابلEFM32WG842F64-QFP64T)
  • Wide pin count supports multi-interface embedded designs (مقابلEFM32WG942F64-B-QFP64)

ملاحظات التصميم

Plan the 1.98 V to 3.8 V supply rail to remain within the device limits during startup, maximum-frequency operation, and peripheral transients. Place the manufacturer-specified bypass capacitors directly beside the corresponding supply and ground pins, and minimize the loop area through each capacitor connection. If the MCU is powered from a regulator shared with analog or communications circuitry, verify voltage droop during wake-up from the selected low-power mode.

Use the manufacturer package drawing and pin-description table to assign all 64 QFP connections before routing. Preserve a continuous ground reference beneath and around the device, keep switching-regulator and high-current traces away from sensitive input pins, and route the debug programming interface for practical programming access. Check the exposed perimeter-pad or thermal arrangement specified for the exact 64-pin package rather than assuming a generic TQFP land pattern.

Do not select a replacement solely from the 48 MHz speed, 64 KB flash capacity, and TQFP pin count. Firmware depends on the device identifier, peripheral map, interrupt vector table, memory map, startup code, and boot configuration. Confirm the complete ordering code, temperature grade, pin functions, and peripheral availability, then rebuild and test the production firmware before using EFM32WG942F64-B-QFP64 or EFM32WG842F64-QFP64T as a substitute.

The 64-pin TQFP provides a larger thermal path than a small lead-count package, but actual temperature rise depends on switching activity, supply voltage, I/O loading, board construction, and ambient conditions. Estimate worst-case power dissipation from the selected clock, enabled peripherals, and output loading, then provide adequate copper around the ground pins. Validate the assembled design across the intended voltage, temperature, and load conditions rather than relying on package size alone.

Follow the datasheet's clock and reset recommendations when laying out the board. Keep oscillator and other timing-critical traces short and away from fast-switching nodes, provide a reliable reset path with the required pull arrangement, and route programming signals to accessible test pads. If analog measurement is a core function, separate analog inputs and references from digital return currents and evaluate the complete ground strategy during prototype testing.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified for the exact EFM32WG942F64-QFP64 ordering code. AEC-Q100 qualification is not applicable to this general-purpose microcontroller ordering code.

تم التحقق من البيانات في: 2026-11-10 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

EFM32WG942F64-QFP64 EFM32WG942F64-QFP64 datasheet EFM32WG942F64-QFP64 datasheet pdf EFM32WG942F64-QFP64 pinout EFM32WG942F64-QFP64 specifications EFM32WG942F64-QFP64 equivalent EFM32WG942F64-QFP64 replacement EFM32WG942F64-QFP64 cross reference EFM32WG942F64-QFP64 footprint EFM32WG942F64-QFP64 price EFM32WG942F64-QFP64 stock Silicon Labs EFM32WG942F64-QFP64 EFM32WG942F64 vs EFM32WG842F64 EFM32WG942F64 64 TQFP pinout

المكونات والمصطلحات ذات الصلة

Silicon Labs EFM32WG942F64-QFP64 EFM32WG942F64-B-QFP64 EFM32WG842F64-QFP64T ARM Cortex-M4F Wonder Gecko 32-bit microcontroller embedded processor microcontroller IC semiconductor 64 KB flash memory 32 KB SRAM 48 MHz clock floating-point unit low-power mode 1.98 V to 3.8 V supply 64-pin TQFP TQFP family surface-mount package GPIO UART SPI I2C industrial sensor node building automation controller
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر