EFM32WG942F64-QFP64 - 48MHz Cortex-M4F MCU | Silicon Labs
N.º de pieza: EFM32WG942F64-QFP64 ✓ ActivoEFM32WG942F64-QFP64 Descripción general
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, clock circuitry, and peripherals such as GPIO, timers, serial interfaces, and analog blocks. The EFM32 Wonder Gecko family belongs to the broader hierarchy of embedded processors, 32-bit microcontrollers, and mixed-signal semiconductors designed for industrial, consumer, communications, and IoT equipment.
The EFM32WG942F64-QFP64 supports operation from a 1.98 V to 3.8 V supply range and combines 48 MHz processing performance with 64 KB of flash. Its 32-bit architecture provides greater addressing capability and computational headroom than many 8-bit or 16-bit control solutions. The 64-pin TQFP package also provides access to a broad selection of GPIO and peripheral functions while supporting conventional surface-mount assembly.
Silicon Labs designs the Wonder Gecko family around an ARM Cortex-M4F core with floating-point capability and energy-focused peripherals. Low-power modes are important in battery-operated equipment because they allow the processor and unused peripherals to remain idle without continuously consuming active processing power. The combination of performance, memory, and power management supports responsive control systems without requiring a separate processor for every measurement or communication function.
Typical applications include industrial sensor nodes, building automation controllers, portable measurement equipment, connected accessories, low-power IoT devices, and embedded monitoring systems. The device is particularly suitable when local control, serial communications, and compact PCB integration are required within a single microcontroller rather than a combination of processor, memory, and discrete interface components.
Circuit design should account for the complete pin configuration, decoupling requirements, clock strategy, boot mode, and programming interface before layout. Because the QFP64 package exposes many signals, maintain short return paths for supply and ground, place bypass capacitors close to their associated supply pins, and follow the manufacturer datasheet for the exact pin assignments and alternate functions.
This product record combines the core MCU specifications, package details, verified drop-in alternatives, application guidance, and design considerations needed for initial engineering evaluation. Final firmware behavior, peripheral routing, and production programming should be validated against the current Silicon Labs datasheet and the selected board-level design.
Alternativas directas para EFM32WG942F64-QFP64 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
EFM32WG942F64-B-QFP64
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
EFM32WG842F64-QFP64T
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
EFM32WG942F64-QFP64 Valores máximos y características eléctricas
| Product Type | 32-bit ARM Cortex-M4F microcontroller |
| Series | EFM32 Wonder Gecko |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| SRAM | 32 KB |
| Supply Voltage Range | 1.98 V to 3.8 V |
| CPU Core | ARM Cortex-M4F |
| Instruction Width | 32 bit |
| Encapsulado | 64-pin TQFP, 10 mm x 10 mm |
| Tipo de montaje | Surface mount |
| Estado RoHS | unknown |
| REACH Status | unknown |
Guía de configuración de pines de EFM32WG942F64-QFP64 64-pin tqfp, 10 mm x 10 mm
Configuración de pines para EFM32WG942F64-QFP64 (encapsulado 64-pin tqfp, 10 mm x 10 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para EFM32WG942F64-QFP64.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
EFM32WG942F64-QFP64 es adecuado para 6 aplicacións: Industrial Sensor Nodes, Building Automation Controllers, Portable Measurement Equipment, Low-Power IoT Devices, Connected Consumer Accessories, Embedded Monitoring Systems.
Industrial Sensor Nodes
The EFM32WG942F64-QFP64 fits industrial sensor nodes that combine local signal conditioning, control logic, and serial communications in a single component. Its 48 MHz Cortex-M4F core provides processing headroom for filtering and control algorithms, while 64 KB of flash supports embedded firmware and 32 KB of SRAM supports working buffers. The 1.98 V to 3.8 V operating range fits low-voltage sensor systems. Use the device with suitable analog front-end circuitry and configure unused peripherals for low power when the node operates on a limited energy budget.
Recomendado
Building Automation Controllers
The EFM32WG942F64-QFP64 is suitable for building automation controllers that coordinate sensors, actuators, communication interfaces, and local logic. Its 64-pin TQFP package provides a practical pin count for systems requiring several peripheral connections, while the 48 MHz Cortex-M4F core can support protocol processing alongside control tasks. The 32 KB SRAM helps manage packet buffers and application state. Firmware should use the low-power peripherals between building-control events to avoid unnecessary active-state consumption.
Recomendado
Portable Measurement Equipment
The EFM32WG942F64-QFP64 can serve as the control processor in portable instrumentation where measurement acquisition, display support, data logging, and USB or serial communication must fit a limited board area. Its 48 MHz Cortex-M4F core and 32-bit architecture support responsive digital filtering, while 64 KB of flash stores application firmware. The low 1.98 V to 3.8 V supply range simplifies integration with battery-derived rails. A portable design should pair the MCU with precision analog front ends and use measured supply-current data to balance response time against battery life.
Recomendado
Low-Power IoT Devices
The EFM32WG942F64-QFP64 is appropriate for compact IoT devices that need more local processing than a simple sensor interface but must maintain conservative energy use. Its Cortex-M4F core runs at up to 48 MHz for protocol handling and edge logic, and its 64 KB flash and 32 KB SRAM eliminate much of the external memory normally required. The device can remain in a suitable sleep state between data transfers. Firmware should explicitly disable unused peripherals and select clock modes that match the required wake-up latency.
Recomendado
Connected Consumer Accessories
The EFM32WG942F64-QFP64 fits connected consumer accessories that combine local interaction logic with serial data exchange. A 48 MHz ARM Cortex-M4F processor can handle protocol state machines, user-interface tasks, and accessory control, while 32 KB of SRAM accommodates communication buffers. Its 64-pin TQFP footprint simplifies access to a broad mix of GPIO and peripheral signals compared with smaller lead-count packages. The 3.8 V maximum supply supports integration into common 3.3 V systems, subject to transient and accuracy requirements at the device pins.
Recomendado
Embedded Monitoring Systems
The EFM32WG942F64-QFP64 is well suited to embedded monitoring systems that must continuously monitor inputs and report status through a wired or wireless interface. The Cortex-M4F core provides enough throughput for sampling schedules, filtering, fault detection, and protocol formatting at 48 MHz. Its 64 KB flash stores firmware and configuration, and the 32 KB SRAM supports sample queues and communications buffers. Designers should use the timer and sleep modes to establish deterministic sampling intervals while keeping radio or communication circuitry active only when required.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para EFM32WG942F64-QFP64 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | EFM32WG942F64-B-QFP64 | EFM32WG842F64-QFP64T |
|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) | 64-TQFP |
| Product Family | Wonder Gecko | Wonder Gecko | Wonder Gecko |
| CPU Core | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB |
| Ordering Suffix | EFM32WG942F64-QFP64 | EFM32WG942F64-B-QFP64 | EFM32WG842F64-QFP64T |
Diferenciadores clave
- Closest identified replacement preserves the full base device configuration (frente a EFM32WG942F64-B-QFP64)
- Related alternative matches the headline compute and memory configuration (frente a EFM32WG842F64-QFP64T)
- Wide pin count supports multi-interface embedded designs (frente a EFM32WG942F64-B-QFP64)
Notas de diseño
Plan the 1.98 V to 3.8 V supply rail to remain within the device limits during startup, maximum-frequency operation, and peripheral transients. Place the manufacturer-specified bypass capacitors directly beside the corresponding supply and ground pins, and minimize the loop area through each capacitor connection. If the MCU is powered from a regulator shared with analog or communications circuitry, verify voltage droop during wake-up from the selected low-power mode.
Use the manufacturer package drawing and pin-description table to assign all 64 QFP connections before routing. Preserve a continuous ground reference beneath and around the device, keep switching-regulator and high-current traces away from sensitive input pins, and route the debug programming interface for practical programming access. Check the exposed perimeter-pad or thermal arrangement specified for the exact 64-pin package rather than assuming a generic TQFP land pattern.
Do not select a replacement solely from the 48 MHz speed, 64 KB flash capacity, and TQFP pin count. Firmware depends on the device identifier, peripheral map, interrupt vector table, memory map, startup code, and boot configuration. Confirm the complete ordering code, temperature grade, pin functions, and peripheral availability, then rebuild and test the production firmware before using EFM32WG942F64-B-QFP64 or EFM32WG842F64-QFP64T as a substitute.
The 64-pin TQFP provides a larger thermal path than a small lead-count package, but actual temperature rise depends on switching activity, supply voltage, I/O loading, board construction, and ambient conditions. Estimate worst-case power dissipation from the selected clock, enabled peripherals, and output loading, then provide adequate copper around the ground pins. Validate the assembled design across the intended voltage, temperature, and load conditions rather than relying on package size alone.
Follow the datasheet's clock and reset recommendations when laying out the board. Keep oscillator and other timing-critical traces short and away from fast-switching nodes, provide a reliable reset path with the required pull arrangement, and route programming signals to accessible test pads. If analog measurement is a core function, separate analog inputs and references from digital return currents and evaluate the complete ground strategy during prototype testing.
Información de cumplimiento
No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified for the exact EFM32WG942F64-QFP64 ordering code. AEC-Q100 qualification is not applicable to this general-purpose microcontroller ordering code.