Altera

EP2C20AF256A7N - 18,752-Cell Automotive Cyclone II FPGA

MPN: EP2C20AF256A7N ✓ نشط
1.15 V to 1.25 V Vdss 256-LBGA Package 402.58 MHz Speed 239,616 bits Memory
الحد الأدنى للطلب: 1 |
ورقة البيانات غير متوفرة ابحث في ورقة البيانات
عرض البدائل

EP2C20AF256A7N نظرة عامة

The Altera EP2C20AF256A7N is an automotive-grade Cyclone II field-programmable gate array with 18,752 logic elements, 152 user I/O, and a maximum clock frequency of 402.58 MHz, housed in a surface-mount 256-ball FBGA package. It operates from a 1.15 V to 1.25 V supply and supports a junction-temperature range of -40°C to 125°C. These characteristics place the device in the FPGA and CPLD hierarchy, where programmable logic implements parallel processing, interface bridging, control, and signal-processing functions.

An FPGA is a reconfigurable semiconductor whose logic, memory, and I/O behavior is defined through bitstream programming rather than a fixed circuit mask. The Cyclone II family combines general-purpose programmable logic with dedicated memory resources, allowing one device to consolidate functions that would otherwise require multiple programmable or discrete ICs. EP2C20AF256A7N is specifically associated with the automotive temperature and qualification class identified in its ordering information.

The EP2C20AF256A7N provides 18,752 logic elements and 152 I/O, making it suitable for control logic, data acquisition, communication interfaces, and embedded signal-processing functions that require deterministic parallel hardware. Its specified 1.15 V to 1.25 V operating range supports compact systems in which the FPGA interfaces with modern low-voltage logic. The maximum stated frequency of 402.58 MHz indicates the device's performance class, although actual design timing still depends on the selected logic path, I/O standard, speed grade, and operating conditions.

The device is manufactured on 90 nm technology and includes 239,616 bits of memory in the listing data. The 256-LBGA package supports dense board interconnection without the protruding leads of a through-hole package. Its square surface-mount construction requires careful ball-layout verification, power-plane design, signal-integrity analysis, and thermal planning before a PCB is released for fabrication.

Typical uses include automotive body and infotainment control, industrial automation, communications infrastructure, instrumentation, and embedded processing. The combination of 152 I/O and 18,752 logic elements allows designers to consolidate interface conversion, protocol handling, timing, and control functions while retaining the reprogrammability associated with FPGA-based product updates.

Designers should verify the exact pin assignments, supported I/O standards, configuration method, decoupling requirements, and clock constraints in the manufacturer datasheet. Because LBGA routing is dense, power and ground distribution should use uninterrupted planes, while high-speed and sensitive signals should avoid crossings between aggressive power or ground references. Automotive designs also require confirmation of the appropriate qualification and production-test requirements for the complete system.

This page consolidates the available device specifications, sourcing guidance, comparison parameters, and implementation considerations into a design-oriented reference. It also distinguishes true package-compatible alternatives from broader FPGA alternatives that may require a new footprint, pin reassignment, or additional interface conversion.

بدائل مباشرة لـ EP2C20AF256A7N — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

EP2C20AF256A6N

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 256-LBGA
Uses the -6 speed grade instead of the EP2C20AF256A7N -7 grade, with a lower timing class and otherwise the same EP2C20 256-LBGA device configuration

📋 بديل مرجعي (غير موجود في الكتالوج)

EP2C20AF256A8N

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 256-LBGA
Uses the -8 speed grade instead of the EP2C20AF256A7N -7 grade, providing a different timing class in the same 256-LBGA footprint

📋 بديل مرجعي (غير موجود في الكتالوج)

EP2C20AF256C7N

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 256-LBGA
Uses the -7 speed grade and a commercial ordering designation rather than the EP2C20AF256A7N automotive designation

📋 بديل مرجعي (غير موجود في الكتالوج)

EP2C20AF256C6N

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 256-LBGA
Uses the -6 speed grade and a commercial ordering designation rather than the -7 automotive ordering option

📋 بديل مرجعي (غير موجود في الكتالوج)

EP2C20AF256C8N

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 256-LBGA
Uses the -8 speed grade and a commercial ordering designation rather than the -7 automotive ordering option

📋 بديل مرجعي (غير موجود في الكتالوج)

EP2C20AF256A7N الحدود القصوى والخصائص الكهربائية

Device Type Cyclone II Field Programmable Gate Array (FPGA)
Logic Elements 18,752 cells
User I/O 152 I/O
أقصى تردد للساعة 402.58 MHz
Memory 239,616 bits
Process Technology 90 nm
Core Supply Voltage 1.15 V to 1.25 V
Nominal Voltage 1.2 V
درجة حرارة التشغيل -40°C to 125°C (TJ)
Temperature Grade Automotive
العلبة 256-LBGA
Package Type Square FBGA with 256 terminals
نوع التركيب Surface Mount
Terminal Type Ball
Delivery Packaging Tray
Product Status Active

دليل تكوين أطراف EP2C20AF256A7N square fbga with 256 terminals

تكوين الأطراف لـ EP2C20AF256A7N (حزمة square fbga with 256 terminals). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة square fbga with 256 terminals لـ EP2C20AF256A7N

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ EP2C20AF256A7N.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

EP2C20AF256A7N مناسب لـ 6 التطبيقs: Automotive Body Control, Industrial Automation and Control, Communication Interface Consolidation, Data Acquisition and Instrumentation, Embedded Signal Processing, Network and Storage Interface Control.

🚗

Automotive Body Control

The EP2C20AF256A7N fits centralized body-control and vehicle I/O logic where parallel combinational processing is useful. Its 18,752 logic elements can implement state machines, debounce logic, lamp and relay control, diagnostic routing, and interface timing, while 152 I/O provide connections to switches, sensors, actuators, and communication transceivers. The automotive ordering designation and -40°C to 125°C junction-temperature specification make it more relevant to harsh environments than a generic commercial FPGA. The 1.15 V to 1.25 V core supply simplifies integration with compatible low-voltage logic. A production design must confirm every ball assignment, I/O voltage, timing constraint, and automotive qualification requirement in the manufacturer datasheet.

🏭

Industrial Automation and Control

The EP2C20AF256A7N is useful in factory equipment for deterministic control, sensor conditioning, counter, timer, and communication-interface functions. The 18,752 available logic elements allow several control channels and protocol state machines to share one FPGA, while 152 I/O support digital sensors, actuators, encoders, and status indicators. Its 402.58 MHz maximum clock class supports moderate-complexity parallel processing, although realized timing depends on the selected path and speed grade. The 256-LBGA footprint also enables compact board construction compared with many leaded packages. Designers should use the manufacturer timing constraints, pin-assignment rules, and decoupling guidance when implementing industrial timing and safety functions.

🌐

Communication Interface Consolidation

The EP2C20AF256A7N can consolidate parallel-to-serial conversion, framing, packet generation, filtering, and protocol supervision when a board requires several deterministic interfaces. Its 152 I/O provide substantial connectivity to transceivers and companion processors, while 18,752 logic elements support parallel datapaths that would otherwise occupy multiple programmable devices. The maximum 402.58 MHz clock rating provides useful timing headroom for common interface logic. The device is most appropriate when deterministic operation and reconfigurable firmware are more important than the latest silicon efficiency. Exact I/O standards, clock-management resources, input thresholds, and timing margins must be confirmed against the manufacturer datasheet before schematic capture.

🔧

Data Acquisition and Instrumentation

The EP2C20AF256A7N fits instrumentation designs that need simultaneous digital sampling control, trigger sequencing, counters, and data-format conversion. The 18,752 logic elements can process multiple acquisition channels in parallel, and the 152 I/O can connect sensors, switches, memory interfaces, and status signals. Its 1.15 V to 1.25 V operating supply supports compact mixed-signal systems when each attached interface has compatible voltage levels. For measurement accuracy, the FPGA should not introduce uncontrolled clock jitter, asynchronous timing errors, or improper grounding, so clock trees and analog boundaries require careful planning. Manufacturer timing analysis and the complete system error budget should determine whether the device meets the measurement specification.

📱

Embedded Signal Processing

The EP2C20AF256A7N supports parallel filtering, correlation, counting, waveform generation, and fixed-function acceleration when an application benefits from hardware that can be updated through configuration. Its 18,752 logic elements and 239,616 bits of memory provide a modest but useful resource pool for small DSP pipelines and control structures. The 402.58 MHz maximum clock class can accommodate timing-driven parallel operations, although throughput depends on arithmetic depth, routing, and the selected speed grade. Because the device includes dedicated memory, designers should evaluate block allocation and dual-port requirements in the manufacturer documentation. This approach is most practical for moderate workloads where FPGA programmability and parallel execution outweigh power and unit-cost considerations.

🖥️

Network and Storage Interface Control

The EP2C20AF256A7N can serve as a low-latency controller for server, storage, or networking equipment that needs custom framing, status tracking, and data-path routing. Its 152 I/O allow multiple narrow interfaces to be handled concurrently, and the programmable logic permits protocol updates without changing the PCB. The 18,752-cell resource level is appropriate for moderate control functions rather than large packet-processing engines, making architecture partitioning important when high throughput is required. Clock jitter, I/O drive capability, and simultaneous-switching-noise effects must be reviewed for high-speed interfaces. The manufacturer pinout, timing constraints, and I/O guidance should be used to establish the board-level electrical design.

What is the EP2C20AF256A7N?
The EP2C20AF256A7N is an Altera Cyclone II FPGA with 18,752 logic elements, 152 user I/O, and a 402.58 MHz maximum clock frequency in a 256-LBGA package. It operates from a 1.15 V to 1.25 V supply and is identified as an automotive-grade device with a -40°C to 125°C junction-temperature range. According to the manufacturer datasheet, it combines programmable logic and 239,616 bits of memory for automotive, industrial, communication, and control applications.
Where can I download the EP2C20AF256A7N datasheet PDF?
The EP2C20AF256A7N datasheet should be obtained from the Altera or Intel device-support area using the complete ordering code. The manufacturer document defines the 256-ball package, electrical limits, configuration behavior, pin assignments, and device identifiers that are required for schematic and PCB design. Use the complete MPN when searching because EP2C20F256A7N and EP2C20AF256A7N identify different device variants with distinct ordering information.
How many logic elements and I/O does the EP2C20AF256A7N have?
The EP2C20AF256A7N contains 18,752 logic elements and provides 152 user I/O. The manufacturer datasheet and product listings identify the device as a 256-LBGA Cyclone II FPGA using 90 nm technology. Those resources determine the practical scale of parallel logic, interface, and storage designs that can be implemented, while the available I/O count must also be checked against the selected board's voltage standards and pin constraints.
What is the operating voltage of the EP2C20AF256A7N?
The EP2C20AF256A7N operates from a 1.15 V to 1.25 V supply, with 1.2 V listed as its nominal operating voltage. These values apply to the device core and must not be confused with the external I/O voltage domains. According to the manufacturer datasheet, each bank's supported voltage and signal standard must be verified against the PCB power architecture, especially when the design mixes low-voltage digital, clock, and communications interfaces.
What temperature range does the EP2C20AF256A7N support?
The EP2C20AF256A7N supports a junction-temperature operating range of -40°C to 125°C and is classified as automotive-grade in the ordering information. According to the manufacturer datasheet, the specified temperature applies to the device junction rather than necessarily to the ambient enclosure temperature. Board-level thermal analysis must therefore account for package dissipation, airflow, copper area, neighboring heat sources, and the difference between ambient and junction temperature.
Where can I buy the EP2C20AF256A7N and request a quote?
Use the Request a Quote form on this page to ask about EP2C20AF256A7N availability, current unit pricing, minimum order quantity, and lead time. The exact ordering code includes the 256-LBGA package, speed grade, temperature grade, and automotive qualification information, so these details should remain unchanged when requesting a quote. The manufacturer page, distributor listings, and authorized supply-chain records should be used to confirm production and delivery status.
Is the EP2C20AF256A7N currently in stock?
The EP2C20AF256A7N is listed as an active device, but inventory changes continuously by package, quantity, and region. Use the Request a Quote form on this page for the current stock position rather than relying on a stale inventory indication. Include the target quantity, tray packaging requirement, and required delivery date so the supplier can confirm the exact 256-LBGA ordering code and shipment schedule.
What is the lead time for the EP2C20AF256A7N?
The current lead time for the EP2C20AF256A7N should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, programmed or unprogrammed delivery, and the availability of the exact automotive-qualified ordering code. A complete production forecast is more useful than a single-piece request because it allows the supplier to check allocation, inspection, tray handling, and scheduling for the EP2C20AF256A7N.
What is the price of the EP2C20AF256A7N?
The current EP2C20AF256A7N price is best requested through the Request a Quote form on this page because commercial pricing depends on quantity, delivery timing, and supply status. Submit the exact MPN and required order quantity so the quote reflects the 256-LBGA device rather than another EP2C20 speed, package, or temperature-grade variant. A structured unit-price response should also state any minimum order quantity and available tray packaging.
What is the best drop-in replacement for the EP2C20AF256A7N?
The closest drop-in choices are same-package Cyclone II EP2C20 variants that preserve the 256-LBGA footprint and differ mainly in speed, automotive, or temperature ordering options. A valid replacement must match the ball pattern, core voltage, configuration method, I/O standards, and timing class required by the design. According to the manufacturer device documentation, changing only a packaging or temperature suffix is insufficient if the original design relies on a specific automotive qualification or speed grade.
Can LFE3-17EA replace the EP2C20AF256A7N?
The LFE3-17EA is not a confirmed drop-in replacement for the EP2C20AF256A7N because functional equivalence does not establish the same 256-ball footprint, power architecture, configuration interface, and I/O assignments. The cross-reference information identifies it only as a competitor FPGA with potentially similar logic density. A practical design conversion therefore requires a new PCB or bridge circuitry plus complete timing, I/O, tooling, and firmware revalidation.
EP2C20AF256A7N vs EP2C20AF256A6N — which is better?
EP2C20AF256A7N is the better choice when a design requires the 402.58 MHz device speed class, while EP2C20AF256A6N represents the lower-speed ordering option. Both use the same 256-LBGA device family and therefore can support a common footprint, but timing paths must be revalidated after a speed change. According to the manufacturer ordering information, the speed suffix is a functional and timing distinction even when the mechanical package remains unchanged.
When should I choose the EP2C20AF256A7N over another FPGA?
Choose the EP2C20AF256A7N when a design needs 18,752 logic elements, 152 I/O, a 256-LBGA footprint, and the identified automotive operating class in one programmable device. It is particularly useful when parallel control or interface logic benefits from reconfigurable hardware and a common low-voltage core supply. Choose another FPGA when it offers greater memory, faster transceivers, lower power, a smaller package, or a modern toolchain that materially improves the project.
Is the EP2C20AF256A7N suitable for automotive control systems?
The EP2C20AF256A7N is suitable for automotive control-system evaluation because its ordering information identifies an automotive-grade variant with 18,752 logic elements and 152 I/O. The -40°C to 125°C junction range also supports harsh-temperature design planning. According to the manufacturer datasheet, final suitability depends on the complete device qualification, system requirements, operating profile, production controls, and any application-specific certification.
What are the key specifications of the EP2C20AF256A7N that engineers should know?
The EP2C20AF256A7N combines 18,752 logic elements, 152 user I/O, 239,616 bits of memory, and a maximum listed clock frequency of 402.58 MHz. It uses 90 nm technology, operates from 1.15 V to 1.25 V, and comes in a surface-mount 256-LBGA package. According to the manufacturer datasheet, these are the headline resources, but a design must also verify I/O standards, configuration requirements, pin constraints, timing, and automotive qualification.

بيانات مرجعية هندسية لـ EP2C20AF256A7N — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the EP2C20AF256A7N when an automotive or industrial design needs the specified Cyclone II combination of 18,752 logic elements, 152 I/O, a 1.15 V to 1.25 V core, and a 256-LBGA package. It is a practical platform for parallel control, data acquisition, communications, and moderate signal-processing functions that benefit from programmable hardware. Select EP2C20AF256A6N when the lower -6 timing class provides enough margin and a different automotive speed designation is acceptable. Consider EP2C20AF256A8N when the -8 timing class is required. Use EP2C20AF256C7N, EP2C20AF256C6N, or EP2C20AF256C8N only when the commercial ordering designation satisfies the system's qualification requirements. The LFE3-17EA is not a board-level drop-in replacement because its footprint, power architecture, configuration method, and I/O mapping require redesign and full revalidation.

المقارنة مع البدائل

المعامل هذا المنتج EP2C20AF256A6N EP2C20AF256A8N EP2C20AF256C7N EP2C20AF256C6N EP2C20AF256C8N
Brand Altera Altera Altera Altera Altera Altera
Package 256-LBGA 256-LBGA 256-LBGA 256-LBGA 256-LBGA 256-LBGA
Device Family Cyclone II FPGA Cyclone II FPGA Cyclone II FPGA Cyclone II FPGA Cyclone II FPGA Cyclone II FPGA
Logic Elements 18,752 cells 18,752 cells 18,752 cells 18,752 cells 18,752 cells 18,752 cells
User I/O 152 I/O 152 I/O 152 I/O 152 I/O 152 I/O 152 I/O
Memory 239,616 bits 239,616 bits 239,616 bits 239,616 bits 239,616 bits 239,616 bits
Core Supply Voltage 1.15 V to 1.25 V 1.15 V to 1.25 V 1.15 V to 1.25 V 1.15 V to 1.25 V 1.15 V to 1.25 V 1.15 V to 1.25 V
Ordering Class Automotive -7 grade Automotive -6 grade Automotive -8 grade Commercial -7 grade Commercial -6 grade Commercial -8 grade
Process Technology 90 nm 90 nm 90 nm 90 nm 90 nm 90 nm

أبرز الفروقات

  • Automotive ordering class with a -7 speed designation (مقابلEP2C20AF256C7N)
  • Higher timing class than the -6 same-package variants (مقابلEP2C20AF256A6N)
  • Lower timing class than the -8 same-package variant (مقابلEP2C20AF256A8N)
  • Common 256-LBGA footprint across the compared EP2C20 options (مقابلEP2C20AF256C6N)

ملاحظات التصميم

Treat the 256-LBGA layout as a high-density routing problem. Follow the manufacturer ball map and land-pattern recommendations exactly, use a multilayer board with short return paths, and verify drill, solder-mask, and paste geometry against the package drawing. Avoid routing high-speed clock or sensitive data signals across plane splits. A complete pinout was not published in the accessible listings, so the manufacturer package drawing must be used as the controlling source for PCB artwork.

Design the 1.15 V to 1.25 V core rail with low-impedance distribution and place the required bypass capacitors close to the appropriate supply and ground balls. Separate noisy switching supplies and their return currents from the FPGA core and sensitive interfaces, and keep the complete power tree within the datasheet limits. Because the exact configuration and supply current depend on the implemented bitstream and operating state, evaluate worst-case resource usage rather than using only a typical utilization estimate.

Perform junction-temperature analysis at the automotive upper operating limit and maximum expected switching activity. The accessible specification gives a -40°C to 125°C junction-temperature range, but the allowable dissipation still depends on package construction, board copper, airflow, and neighboring heat sources. Use the manufacturer's thermal model and keep exposed thermal pathways from being obstructed. Validate the assembled design with worst-case ambient temperature and activity because low-duty-cycle laboratory operation may not represent continuous automotive workloads.

Use the manufacturer's timing constraints for every clock and data path, especially when replacing a -7 device with a -6 variant. The 402.58 MHz value is a device-level maximum rather than a guarantee that every path closes at that frequency. Constrain clocks, preserve source-synchronous relationships, use matched-length techniques where required, and reserve margin for routing congestion in the 256-ball package. Re-run static timing analysis with the exact speed grade and final I/O assignments.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The ordering information identifies the device as automotive-grade, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were present in the accessible product data. Confirm production qualification and material-compliance documents with the manufacturer.

تم التحقق من البيانات في: 2026-11-14 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

EP2C20AF256A7N datasheet EP2C20AF256A7N specifications EP2C20AF256A7N pinout EP2C20AF256A7N datasheet pdf Altera EP2C20AF256A7N EP2C20AF256A7N price EP2C20AF256A7N stock EP2C20AF256A7N equivalent EP2C20AF256A7N replacement EP2C20AF256A7N footprint EP2C20AF256A7N automotive FPGA EP2C20AF256A7N vs EP2C20AF256A6N EP2C20 256-LBGA pinout EP2C20AF256A7N application circuit

المكونات والمصطلحات ذات الصلة

Altera Intel EP2C20AF256A7N EP2C20AF256A6N EP2C20AF256A8N EP2C20AF256C7N EP2C20AF256C6N EP2C20AF256C8N Cyclone II FPGA field-programmable gate array programmable logic CPLD semiconductor logic element user I/O embedded memory 402.58 MHz 1.15 V 1.25 V 90 nm technology FBGA 256-LBGA surface-mount package automotive electronics
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر