EP2C20AF256A7N - 18,752-Cell Automotive Cyclone II FPGA
Référence : EP2C20AF256A7N ✓ ActifEP2C20AF256A7N Présentation
An FPGA is a reconfigurable semiconductor whose logic, memory, and I/O behavior is defined through bitstream programming rather than a fixed circuit mask. The Cyclone II family combines general-purpose programmable logic with dedicated memory resources, allowing one device to consolidate functions that would otherwise require multiple programmable or discrete ICs. EP2C20AF256A7N is specifically associated with the automotive temperature and qualification class identified in its ordering information.
The EP2C20AF256A7N provides 18,752 logic elements and 152 I/O, making it suitable for control logic, data acquisition, communication interfaces, and embedded signal-processing functions that require deterministic parallel hardware. Its specified 1.15 V to 1.25 V operating range supports compact systems in which the FPGA interfaces with modern low-voltage logic. The maximum stated frequency of 402.58 MHz indicates the device's performance class, although actual design timing still depends on the selected logic path, I/O standard, speed grade, and operating conditions.
The device is manufactured on 90 nm technology and includes 239,616 bits of memory in the listing data. The 256-LBGA package supports dense board interconnection without the protruding leads of a through-hole package. Its square surface-mount construction requires careful ball-layout verification, power-plane design, signal-integrity analysis, and thermal planning before a PCB is released for fabrication.
Typical uses include automotive body and infotainment control, industrial automation, communications infrastructure, instrumentation, and embedded processing. The combination of 152 I/O and 18,752 logic elements allows designers to consolidate interface conversion, protocol handling, timing, and control functions while retaining the reprogrammability associated with FPGA-based product updates.
Designers should verify the exact pin assignments, supported I/O standards, configuration method, decoupling requirements, and clock constraints in the manufacturer datasheet. Because LBGA routing is dense, power and ground distribution should use uninterrupted planes, while high-speed and sensitive signals should avoid crossings between aggressive power or ground references. Automotive designs also require confirmation of the appropriate qualification and production-test requirements for the complete system.
This page consolidates the available device specifications, sourcing guidance, comparison parameters, and implementation considerations into a design-oriented reference. It also distinguishes true package-compatible alternatives from broader FPGA alternatives that may require a new footprint, pin reassignment, or additional interface conversion.
Alternatives de remplacement direct pour EP2C20AF256A7N — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
EP2C20AF256A6N
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
EP2C20AF256A8N
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
EP2C20AF256C7N
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
EP2C20AF256C6N
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
EP2C20AF256C8N
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
EP2C20AF256A7N Valeurs maximales et caractéristiques électriques
| Device Type | Cyclone II Field Programmable Gate Array (FPGA) |
| Logic Elements | 18,752 cells |
| User I/O | 152 I/O |
| Fréquence d'horloge maximale | 402.58 MHz |
| Memory | 239,616 bits |
| Process Technology | 90 nm |
| Core Supply Voltage | 1.15 V to 1.25 V |
| Nominal Voltage | 1.2 V |
| Température de fonctionnement | -40°C to 125°C (TJ) |
| Temperature Grade | Automotive |
| Boîtier | 256-LBGA |
| Package Type | Square FBGA with 256 terminals |
| Type de montage | Surface Mount |
| Terminal Type | Ball |
| Delivery Packaging | Tray |
| Product Status | Active |
Guide de configuration des broches du EP2C20AF256A7N square fbga with 256 terminals
Configuration des broches du EP2C20AF256A7N (boîtier square fbga with 256 terminals). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour EP2C20AF256A7N.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
EP2C20AF256A7N convient pour 6 applications: Automotive Body Control, Industrial Automation and Control, Communication Interface Consolidation, Data Acquisition and Instrumentation, Embedded Signal Processing, Network and Storage Interface Control.
Automotive Body Control
The EP2C20AF256A7N fits centralized body-control and vehicle I/O logic where parallel combinational processing is useful. Its 18,752 logic elements can implement state machines, debounce logic, lamp and relay control, diagnostic routing, and interface timing, while 152 I/O provide connections to switches, sensors, actuators, and communication transceivers. The automotive ordering designation and -40°C to 125°C junction-temperature specification make it more relevant to harsh environments than a generic commercial FPGA. The 1.15 V to 1.25 V core supply simplifies integration with compatible low-voltage logic. A production design must confirm every ball assignment, I/O voltage, timing constraint, and automotive qualification requirement in the manufacturer datasheet.
Recommandé
Industrial Automation and Control
The EP2C20AF256A7N is useful in factory equipment for deterministic control, sensor conditioning, counter, timer, and communication-interface functions. The 18,752 available logic elements allow several control channels and protocol state machines to share one FPGA, while 152 I/O support digital sensors, actuators, encoders, and status indicators. Its 402.58 MHz maximum clock class supports moderate-complexity parallel processing, although realized timing depends on the selected path and speed grade. The 256-LBGA footprint also enables compact board construction compared with many leaded packages. Designers should use the manufacturer timing constraints, pin-assignment rules, and decoupling guidance when implementing industrial timing and safety functions.
Recommandé
Communication Interface Consolidation
The EP2C20AF256A7N can consolidate parallel-to-serial conversion, framing, packet generation, filtering, and protocol supervision when a board requires several deterministic interfaces. Its 152 I/O provide substantial connectivity to transceivers and companion processors, while 18,752 logic elements support parallel datapaths that would otherwise occupy multiple programmable devices. The maximum 402.58 MHz clock rating provides useful timing headroom for common interface logic. The device is most appropriate when deterministic operation and reconfigurable firmware are more important than the latest silicon efficiency. Exact I/O standards, clock-management resources, input thresholds, and timing margins must be confirmed against the manufacturer datasheet before schematic capture.
Recommandé
Data Acquisition and Instrumentation
The EP2C20AF256A7N fits instrumentation designs that need simultaneous digital sampling control, trigger sequencing, counters, and data-format conversion. The 18,752 logic elements can process multiple acquisition channels in parallel, and the 152 I/O can connect sensors, switches, memory interfaces, and status signals. Its 1.15 V to 1.25 V operating supply supports compact mixed-signal systems when each attached interface has compatible voltage levels. For measurement accuracy, the FPGA should not introduce uncontrolled clock jitter, asynchronous timing errors, or improper grounding, so clock trees and analog boundaries require careful planning. Manufacturer timing analysis and the complete system error budget should determine whether the device meets the measurement specification.
Recommandé
Embedded Signal Processing
The EP2C20AF256A7N supports parallel filtering, correlation, counting, waveform generation, and fixed-function acceleration when an application benefits from hardware that can be updated through configuration. Its 18,752 logic elements and 239,616 bits of memory provide a modest but useful resource pool for small DSP pipelines and control structures. The 402.58 MHz maximum clock class can accommodate timing-driven parallel operations, although throughput depends on arithmetic depth, routing, and the selected speed grade. Because the device includes dedicated memory, designers should evaluate block allocation and dual-port requirements in the manufacturer documentation. This approach is most practical for moderate workloads where FPGA programmability and parallel execution outweigh power and unit-cost considerations.
Recommandé
Network and Storage Interface Control
The EP2C20AF256A7N can serve as a low-latency controller for server, storage, or networking equipment that needs custom framing, status tracking, and data-path routing. Its 152 I/O allow multiple narrow interfaces to be handled concurrently, and the programmable logic permits protocol updates without changing the PCB. The 18,752-cell resource level is appropriate for moderate control functions rather than large packet-processing engines, making architecture partitioning important when high throughput is required. Clock jitter, I/O drive capability, and simultaneous-switching-noise effects must be reviewed for high-speed interfaces. The manufacturer pinout, timing constraints, and I/O guidance should be used to establish the board-level electrical design.
Recommandé
Données de référence d'ingénierie pour EP2C20AF256A7N — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EP2C20AF256A6N | EP2C20AF256A8N | EP2C20AF256C7N | EP2C20AF256C6N | EP2C20AF256C8N |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | 256-LBGA | 256-LBGA | 256-LBGA | 256-LBGA | 256-LBGA | 256-LBGA |
| Device Family | Cyclone II FPGA | Cyclone II FPGA | Cyclone II FPGA | Cyclone II FPGA | Cyclone II FPGA | Cyclone II FPGA |
| Logic Elements | 18,752 cells | 18,752 cells | 18,752 cells | 18,752 cells | 18,752 cells | 18,752 cells |
| User I/O | 152 I/O | 152 I/O | 152 I/O | 152 I/O | 152 I/O | 152 I/O |
| Memory | 239,616 bits | 239,616 bits | 239,616 bits | 239,616 bits | 239,616 bits | 239,616 bits |
| Core Supply Voltage | 1.15 V to 1.25 V | 1.15 V to 1.25 V | 1.15 V to 1.25 V | 1.15 V to 1.25 V | 1.15 V to 1.25 V | 1.15 V to 1.25 V |
| Ordering Class | Automotive -7 grade | Automotive -6 grade | Automotive -8 grade | Commercial -7 grade | Commercial -6 grade | Commercial -8 grade |
| Process Technology | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm |
Principaux différenciateurs
- Automotive ordering class with a -7 speed designation (vs EP2C20AF256C7N)
- Higher timing class than the -6 same-package variants (vs EP2C20AF256A6N)
- Lower timing class than the -8 same-package variant (vs EP2C20AF256A8N)
- Common 256-LBGA footprint across the compared EP2C20 options (vs EP2C20AF256C6N)
Notes de conception
Treat the 256-LBGA layout as a high-density routing problem. Follow the manufacturer ball map and land-pattern recommendations exactly, use a multilayer board with short return paths, and verify drill, solder-mask, and paste geometry against the package drawing. Avoid routing high-speed clock or sensitive data signals across plane splits. A complete pinout was not published in the accessible listings, so the manufacturer package drawing must be used as the controlling source for PCB artwork.
Design the 1.15 V to 1.25 V core rail with low-impedance distribution and place the required bypass capacitors close to the appropriate supply and ground balls. Separate noisy switching supplies and their return currents from the FPGA core and sensitive interfaces, and keep the complete power tree within the datasheet limits. Because the exact configuration and supply current depend on the implemented bitstream and operating state, evaluate worst-case resource usage rather than using only a typical utilization estimate.
Perform junction-temperature analysis at the automotive upper operating limit and maximum expected switching activity. The accessible specification gives a -40°C to 125°C junction-temperature range, but the allowable dissipation still depends on package construction, board copper, airflow, and neighboring heat sources. Use the manufacturer's thermal model and keep exposed thermal pathways from being obstructed. Validate the assembled design with worst-case ambient temperature and activity because low-duty-cycle laboratory operation may not represent continuous automotive workloads.
Use the manufacturer's timing constraints for every clock and data path, especially when replacing a -7 device with a -6 variant. The 402.58 MHz value is a device-level maximum rather than a guarantee that every path closes at that frequency. Constrain clocks, preserve source-synchronous relationships, use matched-length techniques where required, and reserve margin for routing congestion in the 256-ball package. Re-run static timing analysis with the exact speed grade and final I/O assignments.
Informations de conformité
The ordering information identifies the device as automotive-grade, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were present in the accessible product data. Confirm production qualification and material-compliance documents with the manufacturer.