EP2C20AF256I8N - 20K Logic Elements FPGA | Altera
MPN: EP2C20AF256I8N ✓ نشطEP2C20AF256I8N نظرة عامة
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnects, and input/output behavior are configured after manufacture. FPGAs sit within the broader hierarchy of programmable logic devices, interface ICs, and digital semiconductors. They are used when engineers need parallel hardware, adaptable interfaces, or high-throughput logic that would be cumbersome to implement with fixed-function logic ICs.
The EP2C20AF256I8N provides 18,752 logic elements for digital datapaths, control logic, communication interfaces, and embedded protocol handling. Its stated maximum frequency of 402.58 MHz supports demanding clocked designs, while the 1.2 V operating supply is characteristic of the Cyclone II generation. The 256-pin FBGA package supports a high pin count for external memory, configuration, clock, and general-purpose I/O requirements.
The AF256 suffix identifies the 256-pin package configuration, while the I8 ordering identifies industrial temperature and speed-grade characteristics. Configuration storage, programming, and device handling follow the Cyclone II design flow. Because this device is programmed rather than fixed in silicon, the same hardware can support different control, interface, or signal-processing functions after configuration is loaded.
Typical uses include industrial control, embedded communications, data acquisition, instrumentation, video-processing backends, and general-purpose programmable logic. The device is particularly appropriate when deterministic parallel processing, reconfigurable interfaces, or compact implementation of complex digital functions are required. The FBGA footprint also demands careful PCB layout, especially for power delivery, clock integrity, and configuration routing.
Designers should use the Cyclone II device family datasheet for the complete pin table, power specifications, configuration requirements, differential-pair rules, and package dimensions. The FBGA layout requires adequate via access under the device, continuous supply planes, short return paths, and careful decoupling. Configuration signals and clock inputs should be routed away from high-current switching nodes wherever possible.
This page combines the device identity, operating characteristics, package information, sourcing guidance, drop-in alternatives, comparison parameters, and practical PCB considerations. It is intended to help engineers determine whether the EP2C20AF256I8N fits the logic capacity, speed, temperature class, package, and programming requirements of an industrial programmable-logic design.
بدائل مباشرة لـ EP2C20AF256I8N — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع EP2C20AF256I8N (نفس عامل الشكل والبصمة) — يختلف في Mounting Type, Package, Process Technology, Speed Grade, RoHS Status.
EP2C20F256I8N
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←EP2C20F256C8N
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←EP2C20F256C6N
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←EP2C20AF256I8N الحدود القصوى والخصائص الكهربائية
| Device Type | Cyclone II FPGA (1 device) |
| Logic Elements | 18,752 elements |
| Maximum Frequency | 402.58 MHz |
| جهد التغذية | 1.2 V |
| Device Family | Cyclone II (1 family) |
| Package Type | FBGA-256 (1 package) |
| عدد الأطراف | 256 pins |
| Temperature Grade | Industrial (I grade) |
| Speed Grade | Grade 8 (I8) |
| Logic Technology | CMOS (1 process class) |
| نوع التركيب | Surface mount (1 mounting class) |
| Lead-Free Status | Lead-free (1 package designation) |
| Packaging Quantity | 1 device per tray |
دليل تكوين أطراف EP2C20AF256I8N fbga-256 (1 package)
تكوين الأطراف لـ EP2C20AF256I8N (حزمة fbga-256 (1 package)). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ EP2C20AF256I8N.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
EP2C20AF256I8N مناسب لـ 6 التطبيقs: Industrial Control Logic, Industrial Communication Interfaces, Data Acquisition and Instrumentation, Embedded Signal Processing, Video Processing Backends, Programmable Test and Measurement.
Industrial Control Logic
The EP2C20AF256I8N fits industrial control systems that require parallel logic, flexible I/O, and reconfigurable sequencing. Its 18,752 logic elements can implement control state machines, interlocks, counter logic, and communication adapters without a large fixed-function gate array. The device operates from a 1.2 V supply and reaches a stated maximum frequency of 402.58 MHz, allowing clocked control and protocol logic to be consolidated. For implementation, use the manufacturer pin tables and configuration guidelines, place decoupling close to every supply pin, and route high-speed clocks away from switching nodes. The I8 ordering is appropriate when the design specification requires the industrial speed-grade variant, subject to confirmation of the full operating-temperature range.
موصى به
Industrial Communication Interfaces
The EP2C20AF256I8N is suitable for configurable communication front ends that combine protocol handling with external data conversion. The 18,752 available logic elements support parallel framing, filtering, buffering, and interface adaptation, while the 402.58 MHz maximum clock rate supports timing-critical packet processing. A practical implementation can place the FPGA between a transceiver and a host processor, using the configuration system for protocol-specific logic. The 256-pin FBGA provides a large external interface complement, but every assignment must be checked against the Cyclone II device pin tables. Differential and high-speed routing should follow the manufacturer’s board-layout guidance to limit skew, reflections, and data errors.
موصى به
Data Acquisition and Instrumentation
The EP2C20AF256I8N can implement deterministic acquisition, triggering, filtering, and data-formatting logic in instrumentation systems. Its 18,752 logic elements make it useful for coordinating multiple parallel channels, performing threshold decisions, and transferring formatted samples through a high-speed interface. The device’s stated 402.58 MHz maximum frequency provides ample clocking capability for moderately complex pipelines, while the 1.2 V supply supports integration into modern mixed-signal systems. Place the FPGA close to connector and converter circuitry, maintain short return paths for clocks, and use separate filtering for sensitive analog sections. Configuration should be validated for startup behavior and deterministic reset requirements before deployment.
موصى به
Embedded Signal Processing
The EP2C20AF256I8N supports parallel digital signal-processing functions such as filtering, correlation, waveform generation, and fixed-format arithmetic. A pool of 18,752 logic elements can be organized into multiple parallel pipelines, and the 402.58 MHz maximum frequency permits high-speed clocked processing when external memory bandwidth is adequate. Designers commonly implement a pipeline with registers between combinational stages, then configure the design through the Cyclone II programming flow. Because performance depends on routing and memory timing, use the manufacturer timing guidance and keep memory, clock, and I/O paths short. The BGA package also requires a mechanically sound substrate and adequate via access beneath the device.
موصى به
Video Processing Backends
The EP2C20AF256I8N can implement parallel pixel transport, color processing, test-pattern generation, and frame timing in embedded video equipment. The 18,752 logic elements accommodate configurable datapaths and control functions, while the 256-pin FBGA offers a broad interface count for connecting video memories, serializers, and display controllers. A practical design uses clocked pipeline stages and dedicated registers to meet pixel timing, with configuration performed through the supported Cyclone II programming method. High-speed data routing must follow the manufacturer’s impedance and length-matching guidance. Because FBGA assembly is sensitive to layout errors, verify escape routing, power-plane continuity, via symmetry, and thermal performance during PCB signoff.
موصى به
Programmable Test and Measurement
The EP2C20AF256I8N is appropriate for configurable test systems that combine pattern generation, timing control, protocol checks, and result capture. The device’s 18,752 logic elements can support multiple parallel test channels, and its 402.58 MHz maximum frequency allows demanding digital stimulus sequences. Engineers can partition the logic among timing generation, channel control, and data comparison blocks, then reload configuration for different tests. The 256-pin FBGA package supports external memory and instrument I/O, although every signal must be assigned according to the exact Cyclone II pin table. Validate clock jitter, output timing, configuration startup, and thermal conditions before connecting the device to precision analog test hardware.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ EP2C20AF256I8N — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | EP2C20F256I8N | EP2C20F256C8N | EP2C20F256C6N |
|---|---|---|---|---|
| Brand | Altera | Intel | Intel | Intel |
| Package | FBGA-256 | FBGA-256 | FBGA-256 | FBGA-256 |
| Device Family | Cyclone II | Cyclone II | Cyclone II | Cyclone II |
| Logic Elements | 18,752 elements | 20K-element configuration | 20K-element configuration | 20K-element configuration |
| Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | Grade 8 | Grade 8 | Grade 8 | Grade 6 |
| Temperature Ordering Class | Industrial | Industrial | Commercial | Commercial |
| Pin Count | 256 pins | 256 pins | 256 pins | 256 pins |
أبرز الفروقات
- Exact industrial speed-grade ordering (مقابلEP2C20F256C6N)
- Industrial ordering class (مقابلEP2C20F256C8N)
- Documented close functional match (مقابلEP2C20F256I8N)
ملاحظات التصميم
Design the FBGA-256 footprint directly from the manufacturer package drawing and pin table. Use a symmetrical via field beneath the device, maintain uninterrupted reference planes, and verify annular rings, solder-mask definition, and assembly clearances against the current package specification. Do not infer ball assignments from a generic BGA drawing because configuration, clock, power, and ground positions are device-specific.
Route each 1.2 V supply rail as a low-impedance plane and place the manufacturer-recommended bypass capacitors close to the associated device balls. Separate the core supply from sensitive I/O and configuration distribution where the Cyclone II layout guidance permits. Confirm the complete core, I/O, and auxiliary voltage requirements in the device-family datasheet before releasing power-system schematics.
Apply the manufacturer’s clock and high-speed I/O routing rules, including controlled-impedance routing, matched-length treatment where required, and avoidance of stubs or right-angle transitions. Keep configuration traces away from clocks and switching nodes. Because the stated maximum frequency is 402.58 MHz, post-layout timing analysis and board-level signal-integrity validation are essential.
Estimate power consumption from the selected design’s logic utilization, I/O activity, clock rate, and the device-family power tables rather than relying on one headline value. Check junction temperature against the package thermal model and the intended ambient range. The compact FBGA package can be thermally limited, so spreading power across the supply network and exposing enough board copper improves heat dissipation.
Avoid treating the EP2C20F256I8N, EP2C20F256C8N, and EP2C20F256C6N as unconditional substitutions for the EP2C20AF256I8N. Although all use the same 256-pin package family, speed-grade and temperature-ordering distinctions can change timing guarantees and environmental suitability. Verify configuration compatibility, startup behavior, electrical limits, and qualification requirements before approving a substitution.
معلومات الامتثال
The ordering documentation identifies the device as lead-free. RoHS, REACH, halogen-free, and conflict-minerals status require confirmation from the manufacturer’s current product or material declaration.