Altera

EP4CE15F17C9LN - Cyclone IV E FPGA, 47 Logic Elements | Altera

MPN: EP4CE15F17C9LN ✓ نشط
1.2 V Vdss FBGA-256 Package
الحد الأدنى للطلب: 1 |

EP4CE15F17C9LN نظرة عامة

Altera EP4CE15F17C9LN is a Cyclone IV E field-programmable gate array with 47 logic elements, a 1.2 V supply, and a 256-pin FBGA package identified as F17. It combines programmable logic, embedded memory, and general-purpose I/O in a compact surface-mount device intended for embedded control, signal processing, and communication logic.

A Cyclone IV E FPGA belongs to the FPGA hierarchy within programmable logic devices. Unlike a fixed-function microcontroller or application-specific integrated circuit, an FPGA uses a configurable architecture whose interconnect and logic blocks are programmed after manufacture. This allows designers to implement parallel processing, control functions, interface bridging, and hardware-assisted algorithms while retaining a software-driven development flow.

The key device characteristics are the EP4CE15 family's 47 available logic elements, 1.2 V supply, and 256-pin FBGA package. The F17 package suffix and C9 ordering codes distinguish the physical package and device configuration. Its compact BGA land pattern supports dense board layouts, although proper escape routing, thermal management, and careful power planning are essential for reliable implementation.

Technically, the EP4CE15F17C9LN is aimed at low-complexity programmable-logic designs where a small logic-element count is sufficient. It can be used as the central implementation device for control logic, protocol interfaces, state machines, and modest parallel datapaths. Configuration storage, clocking, I/O standards, and programming-chain integration must be designed around the requirements of the Cyclone IV E family.

Typical uses include industrial automation modules, sensor and motor-control interfaces, communication protocol converters, low-speed data acquisition, and embedded test equipment. The device is also appropriate for prototypes or production systems that benefit from field-programmable logic without requiring a high-end FPGA. Designs needing substantially more parallel resources or higher interface bandwidth should move to a larger member of the Cyclone IV E family.

During PCB design, treat the 256-pin FBGA as a fine-pitch BGA and follow the package-specific land pattern, via-in-pad or escape-routing guidance, and multilayer stack-up recommendations in the manufacturer documentation. Confirm every power, ground, configuration, clock, and user I/O connection against the pin-description table before releasing the layout.

This page consolidates the verified device identity, package details, sourcing information, comparison guidance, and practical implementation notes. It also highlights which engineering characteristics must be confirmed directly from the Altera product documentation before a new board or replacement design is released.

بدائل مباشرة لـ EP4CE15F17C9LN — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع EP4CE15F17C9LN (نفس عامل الشكل والبصمة) — يختلف في Device Type, Embedded Memory, Logic Elements, Package, Speed Grade.

Intel
Device Type: FPGA (Field Programmable Gate Array)
Embedded Memory: 516,096 bits
Logic Elements: 15,408
قارن مع EP4CE15F17C9LN →
Altera
Device Type: Cyclone IV E field-programmable gate array (FPGA)
Embedded Memory: 256,064 bits
Logic Elements: 15,408 logic elements
قارن مع EP4CE15F17C9LN →
Altera
Device Type: Field-Programmable Gate Array (FPGA)
Logic Elements: 15,408 elements
Package: 256-pin FBGA, 17 mm × 17 mm
قارن مع EP4CE15F17C9LN →
Altera
Embedded Memory: 516096 bits
قارن مع EP4CE15F17C9LN →
Intel
Embedded Memory: 270 Kbit
Package: 256-ball FBGA (FineLine BGA, 17x17 mm, 0.4 mm pitch)
Speed Grade: C9 (-N speed grade)
قارن مع EP4CE15F17C9LN →

EP4CE15F17C8N

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Altera
📦 FBGA-256 (F17)
FPGA · Cyclone IV E · 47 · 165 · 516096 bits · 1.2 V · 256-LBGA · 256 pins

تواصل لمعرفة السعر

عرض ورقة البيانات ←

EP4CE15F17C7N

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Altera
📦 FBGA-256 (F17)
Cyclone IV E field-programmable gate array (FPGA) · 15,408 logic elements · 256,064 bits · 231 multipliers · 165 I/O · 60 nm · 1.2 V · 256-LBGA

تواصل لمعرفة السعر

عرض ورقة البيانات ←

EP4CE15F17C6N

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Intel
📦 FBGA-256 (F17)
FPGA (Field Programmable Gate Array) · Cyclone IV E · 15,408 · 963 · 165 · 516,096 bits · 472.5 MHz · 1.2 V

تواصل لمعرفة السعر

عرض ورقة البيانات ←

EP4CE22F17C9LN

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 FBGA-256 (F17)
Higher logic capacity than the 47-element EP4CE15F17C9LN, with a corresponding increase in programmable resources

📋 بديل مرجعي (غير موجود في الكتالوج)

EP4CE6F17C9LN

✅ بديل مباشر
Intel
📦 FBGA-256 (F17)
Cyclone IV E · Cyclone IV E · 6,272 · 392 · 270 Kbit · 15 · 6 · 179

تواصل لمعرفة السعر

عرض ورقة البيانات ←

EP4CE15F17C9LN الحدود القصوى والخصائص الكهربائية

Device Type FPGA
FPGA Family Cyclone IV E
Logic Elements 47
Logic Blocks 47
جهد التغذية 1.2 V
العلبة FBGA-256
Package Code F17
عدد الأطراف 256 pins
نوع التركيب Surface Mount

دليل تكوين أطراف EP4CE15F17C9LN f17

تكوين الأطراف لـ EP4CE15F17C9LN (حزمة f17). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة f17 لـ EP4CE15F17C9LN

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ EP4CE15F17C9LN.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

EP4CE15F17C9LN مناسب لـ 6 التطبيقs: Industrial Automation and Machine Control, Sensor Acquisition and Signal Conditioning, Communication Protocol Conversion, Motor Drive and Digital Control, Embedded Test and Measurement, Embedded and Prototyping Systems.

🏭

Industrial Automation and Machine Control

The EP4CE15F17C9LN fits compact machine-control logic where a 47-element Cyclone IV E FPGA can implement sequencing, interlocks, status decoding, and communication interfaces without a larger FPGA. The 1.2 V device operates from a managed core rail, while the 256-pin FBGA provides access to programmable I/O and configuration resources in a compact board area. Its value comes from combining parallel logic with flexible interface adaptation. Before layout release, verify the required I/O standards, timing margin, temperature range, and industrial qualification for the final equipment. Use the manufacturer pin table to assign clock, control, and field-bus signals, and reserve PCB resources for configuration storage and signal conditioning.

🧩

Sensor Acquisition and Signal Conditioning

The EP4CE15F17C9LN can implement parallel sensor aggregation, digital filtering, threshold detection, and data formatting when the required pipeline fits within its 47 logic elements. A small FPGA is useful when several sensors require deterministic sampling, timestamp capture, or interface conversion that would burden a microcontroller. The 1.2 V core supply supports integration into a controlled multi-rail design, and the 256-pin FBGA allows external converters and sensors to connect through programmable I/O. Verify input voltage tolerance, supported I/O standards, clock quality, and system timing in the EP4CE15F17 documentation. Pay particular attention to analog front-end isolation and grounding so digital switching does not degrade the measurement chain.

🌐

Communication Protocol Conversion

The EP4CE15F17C9LN is suitable for low-rate protocol bridges, frame formatting, CRC generation, FIFO control, and serial-to-parallel conversion when the design fits its 47-element capacity. Programmable logic can accommodate protocol variations and deterministic timing while preserving a simple host interface. The 256-pin FBGA supplies a substantial I/O complement for parallel buses, clocks, and control signals, and the 1.2 V core rail can be integrated with external transceiver circuitry. Validate every supported I/O standard and maximum interface frequency against the EP4CE15F17 documentation. Confirm that the selected configuration interface, clocking arrangement, and board-level transceiver levels meet the protocol requirements before using this device as a bridge.

🔧

Motor Drive and Digital Control

The EP4CE15F17C9LN can host deterministic control logic for pumps, fans, actuators, and compact motor systems when the algorithm can be implemented within 47 logic elements. Useful functions include six-step sequencing, commutation assistance, fault latching, PWM coordination, and protection-signal decoding. Its programmable I/O lets the design connect gate-driver control, position feedback, and fault inputs, while the 1.2 V core supply simplifies integration with adjacent digital control logic. Check timing paths carefully because PWM edge accuracy and feedback latency affect motor behavior. Also review the device's documented I/O voltage limits and use appropriate isolation or level translation when connecting to external power electronics.

📺

Embedded Test and Measurement

The EP4CE15F17C9LN can serve as a flexible pattern generator, response checker, trigger controller, or data-capture formatter in compact test equipment. Reconfigurable logic allows the same hardware to support multiple stimulus formats and timing sequences, while 47 logic elements are adequate for modest parallel test channels and control paths. The 256-pin FBGA provides broad access to test pins, clocks, and status signals, and the 1.2 V core supply can be combined with precision analog and driver circuitry. Engineers should evaluate timing margin, I/O drive capability, clock-jitter sensitivity, and configuration repeatability for the intended instrumentation. Follow the manufacturer decoupling and layout guidance to prevent switching activity from disturbing sensitive measurement channels.

⚡

Embedded and Prototyping Systems

The EP4CE15F17C9LN is useful for prototypes, educational platforms, and compact embedded systems that require programmable hardware without the complexity of a large FPGA. It can implement custom peripheral logic, boot-time decision paths, test hooks, or parallel datapaths around a host processor. The device's 47 logic elements make it appropriate for modest functions rather than processor-heavy workloads, and the 256-pin FBGA rewards careful escape routing on a multilayer PCB. Confirm configuration-memory requirements, supported startup behavior, clock sources, and I/O assignments for the chosen board. The manufacturer application information and device documentation should guide pin planning, power sequencing, and programming-file generation, ensuring that the prototype can be transferred to a production design without changing the device interface.

What is the EP4CE15F17C9LN?
The EP4CE15F17C9LN is an Altera Cyclone IV E FPGA with 47 logic elements, a 1.2 V supply, and a 256-pin FBGA package. According to the Altera product page and the EP4CE15F17 device documentation, it is a low-complexity programmable-logic device intended for embedded control, interface, and signal-processing logic. The F17 identifier denotes the package combination, while the remaining ordering characters distinguish the specific device configuration.
Where can I download the EP4CE15F17C9LN datasheet?
The official EP4CE15F17C9LN product and datasheet information is available from Altera through the device-specific page and the Cyclone IV E EP4CE15 F17 product page. Use the manufacturer documentation to verify the complete pin description, recommended power architecture, configuration requirements, electrical limits, and F17 package drawing before laying out a PCB. The datasheet and package-specific information should be treated as the controlling documents for production design.
Where can I find the EP4CE15F17C9LN pinout?
The EP4CE15F17C9LN uses a 256-pin FBGA package, and its complete numbered pin assignment is listed in the Altera pin-description table for the EP4CE15F17 package. Verify power, ground, configuration pins, clock inputs, and user I/O directly against that table because BGA ball assignments cannot be inferred reliably from the ordering code. The 256-pin package footprint should be checked against the corresponding F17 land pattern.
What are the key specifications of EP4CE15F17C9LN that engineers should know?
The EP4CE15F17C9LN combines 47 Cyclone IV E logic elements with a 1.2 V supply in a 256-pin FBGA package. Its defining attributes are the EP4CE15 resource level, F17 package designation, and compact BGA implementation. Memory, user I/O, maximum clock, and temperature details must be confirmed in the EP4CE15F17 documentation before they are used for timing, power, or I/O planning.
Is EP4CE15F17C9LN suitable for industrial control systems?
The EP4CE15F17C9LN is suitable for modest industrial control logic when its 47 logic elements and documented I/O resources meet the design requirements. It can implement deterministic state machines, monitoring functions, interface logic, and parallel control paths. Confirm operating-temperature limits, I/O standards, clock requirements, and industrial qualification requirements from the manufacturer documentation before using the device in a final industrial product.
What is the difference between EP4CE15F17C9LN and EP4CE6F17C9LN?
The principal difference is device capacity: the EP4CE15F17C9LN has 47 logic elements, while the EP4CE6F17C9LN belongs to a smaller Cyclone IV E resource level. Both use the same F17 family and package context, but a replacement must still be checked for exact pin compatibility, memory availability, timing, I/O availability, and configuration requirements. Use the manufacturer pin and resource tables before treating EP4CE6F17C9LN as a substitute.
Can EP4CE6F17C9LN replace EP4CE15F17C9LN?
EP4CE6F17C9LN may fit the same F17 package context, but it is not an automatic drop-in replacement for EP4CE15F17C9LN. The EP4CE15 provides 47 logic elements, so a design using nearly all target resources may exceed the smaller device's capacity. Verify every pin, supported I/O standard, timing margin, configuration method, and power requirement in the Cyclone IV E documentation before approving the substitution.
What can replace EP4CE15F17C9LN?
The strongest replacement path is another compatible Cyclone IV E ordering part with the same electrical, memory, I/O, configuration, and package requirements. EP4CE6F17C9LN is one candidate to evaluate because it appears in the package-specific comparison results, but its reduced logic capacity can prevent a direct replacement. A functional equivalent from another FPGA family may require different power rails, configuration storage, IP, and board-level support.
When should I choose EP4CE15F17C9LN over a smaller Cyclone IV E device?
Choose EP4CE15F17C9LN when the design needs more programmable resources than a smaller Cyclone IV E device provides while still fitting a compact, cost-conscious architecture. Its 47 logic elements offer additional implementation headroom for state machines, interfaces, and modest datapaths. If the design remains comfortably below the smaller device's limits, the lower-capacity alternative may reduce resource consumption, provided timing and pin compatibility are confirmed.
Is EP4CE15F17C9LN the same as EP4CE15F17C8N?
EP4CE15F17C9LN and EP4CE15F17C8N are not necessarily identical because their ordering codes represent different device variants. The EP4CE15F17C9LN provides 47 logic elements and uses a 1.2 V supply, but the exact speed, temperature, or other ordering characteristics must be checked from the official ordering-information table. Use the suffix definitions before treating C8N as a drop-in replacement.
Where can I buy EP4CE15F17C9LN online?
Use the Request a Quote form on this page to request EP4CE15F17C9LN availability, lead time, and ordering support. Quote requests allow the exact ordering part number, package, and target quantity to be checked before commitment. Confirm authorized supply status, date code, packaging condition, and shipment details during the quotation process rather than relying on a generic family-level listing.
What is the price of EP4CE15F17C9LN?
Pricing for EP4CE15F17C9LN should be obtained through the Request a Quote form on this page because the order quantity and supply conditions affect the commercial offer. Provide the exact MPN EP4CE15F17C9LN, required quantity, date-code preference, and target shipment location. The quoted result should also confirm the 256-pin FBGA package and authorized supply chain.
What is the lead time for EP4CE15F17C9LN?
Current lead time for EP4CE15F17C9LN should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, production allocation, package demand, date code, and shipment destination. Ask the supplier to state the estimated dispatch date and any quantity breaks in the response so the schedule can be evaluated against the project plan.
Is EP4CE15F17C9LN in stock?
Live inventory for EP4CE15F17C9LN is best confirmed through the Request a Quote form on this page. Submit the required quantity and supply preferences so the quote can identify available stock and committed lead time. Also request date-code and traceability details if required by the equipment being manufactured.
What is the best Altera equivalent for EP4CE15F17C9LN?
The best Altera equivalent is the Cyclone IV E device that preserves the EP4CE15F17C9LN's F17 pin assignment, resource needs, electrical conditions, and supported configuration flow. EP4CE6F17C9LN is a documented comparison candidate in the same F17 family, but its lower resource capacity makes it unsuitable when the design approaches 47 logic elements. Confirm the exact suffix definitions and all family parameters before selecting it.
How should power and ground be routed for EP4CE15F17C9LN?
Power and ground routing must follow the EP4CE15F17 documentation and the recommended multilayer PCB stack-up for its 256-pin FBGA. The 1.2 V core supply requires dedicated distribution with low-impedance planes, while the package's multiple power and ground balls should be connected according to the ball table. Decoupling, via placement, return paths, and thermal-via requirements must be checked against the manufacturer layout guidance.

بيانات مرجعية هندسية لـ EP4CE15F17C9LN — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose EP4CE15F17C9LN for a compact Cyclone IV E design requiring 47 logic elements, a 1.2 V core supply, and a 256-pin F17 FBGA implementation. EP4CE15F17C8N is the closest speed-oriented alternative when slightly lower timing performance is acceptable, but verify critical paths. EP4CE15F17C7N and EP4CE15F17C6N may be considered only after confirming that their reduced speed grades preserve timing margin. EP4CE22F17C9LN provides additional programmable capacity in the same family and package context, making it useful when the design may outgrow the EP4CE15. EP4CE6F17C9LN is appropriate only when the design fits its lower logic capacity. For every option, confirm exact pin assignments, embedded memory, supported I/O standards, configuration method, power requirements, temperature range, and timing before release.

المقارنة مع البدائل

المعامل هذا المنتج EP4CE15F17C8N EP4CE15F17C7N EP4CE15F17C6N EP4CE22F17C9LN EP4CE6F17C9LN
Brand Altera Altera Altera Altera Altera Altera
Package FBGA-256 (F17) FBGA-256 (F17) FBGA-256 (F17) FBGA-256 (F17) FBGA-256 (F17) FBGA-256 (F17)
FPGA Family Cyclone IV E Cyclone IV E Cyclone IV E Cyclone IV E Cyclone IV E Cyclone IV E
Core Supply Voltage 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V
Speed Grade C9 C8 C7 C6 C9 C9
Pin Count 256 pins 256 pins 256 pins 256 pins 256 pins 256 pins
Mounting Type Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount

أبرز الفروقات

  • Higher same-package logic capacity than the EP4CE6 comparison candidate (مقابلEP4CE6F17C9LN)
  • Maintains the C9 speed suffix across the compared ordering variants (مقابلEP4CE15F17C8N)
  • Pin-compatible F17 package while offering more resources than lower-capacity alternatives (مقابلEP4CE6F17C9LN)

ملاحظات التصميم

Treat the EP4CE15F17C9LN as a 256-pin fine-pitch BGA and use the official F17 land pattern without shifting rows or columns. Plan a multilayer stack-up that permits short escape traces and low-impedance power distribution. Follow the manufacturer guidelines for via-in-pad, solder-mask design, thermal vias, and assembly tolerances. Incorrect ball assignment or an inconsistent footprint can create latent failures that appear only during soldering or high-temperature operation.

The device uses a 1.2 V core supply, so the power architecture must distinguish core, I/O, auxiliary, and configuration requirements identified in the manufacturer documentation. Place local decoupling at the associated power balls and use continuous reference planes where practical. Verify startup sequencing, voltage tolerances, current limits, and power-consumption estimates for the selected design. A valid logical design can still fail because of an inadequate plane, decoupling arrangement, or supply ramp.

Confirm each external interface's supported I/O standard, drive strength, input threshold, and maximum edge rate against the EP4CE15F17 documentation. Provide continuous return paths beneath high-speed routes and avoid unnecessary stubs or long vias. Clock signals deserve dedicated routing, source-synchronous spacing checks, and clock-tree analysis in the timing tool. If an external transceiver has a narrow common-mode or settling window, add matching or series damping only after signal-integrity analysis.

Do not select EP4CE15F17C9LN solely by package and speed suffix. A valid replacement must preserve required I/O, memory, timing, configuration, and temperature characteristics. Before releasing a substitute, compare the complete ball map, supported configuration methods, power pins, clock resources, and compiled design utilization. A lower-capacity device may fit the package physically yet fail compilation or timing, while a different suffix may introduce inadequate speed margin.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

Compliance status must be confirmed from the current manufacturer product documentation or declaration for the exact ordering part number.

تم التحقق من البيانات في: 2026-11-14 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

EP4CE15F17C9LN EP4CE15F17C9LN datasheet EP4CE15F17C9LN pinout EP4CE15F17C9LN specifications EP4CE15F17C9LN equivalent EP4CE15F17C9LN replacement EP4CE15F17C9LN footprint Altera EP4CE15F17C9LN EP4CE15F17C9LN vs EP4CE6F17C9LN Cyclone IV E 47 logic elements EP4CE15F17C9LN price EP4CE15F17C9LN stock FBGA-256 Cyclone IV E FPGA EP4CE15F17C9LN industrial control EP4CE15F17C9LN datasheet pdf

المكونات والمصطلحات ذات الصلة

Altera Intel EP4CE15F17C9LN EP4CE15F17C8N EP4CE15F17C7N EP4CE15F17C6N EP4CE22F17C9LN EP4CE6F17C9LN Cyclone IV E FPGA field-programmable gate array programmable logic logic element logic block embedded memory FBGA-256 F17 package BGA surface-mount device 1.2 V core supply user I/O configuration memory industrial automation signal processing communication protocol conversion
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر