EP4CE15F17C9LN - Cyclone IV E FPGA, 47 Logic Elements | Altera
N.º da peça: EP4CE15F17C9LN ✓ AtivoEP4CE15F17C9LN Visão geral
A Cyclone IV E FPGA belongs to the FPGA hierarchy within programmable logic devices. Unlike a fixed-function microcontroller or application-specific integrated circuit, an FPGA uses a configurable architecture whose interconnect and logic blocks are programmed after manufacture. This allows designers to implement parallel processing, control functions, interface bridging, and hardware-assisted algorithms while retaining a software-driven development flow.
The key device characteristics are the EP4CE15 family's 47 available logic elements, 1.2 V supply, and 256-pin FBGA package. The F17 package suffix and C9 ordering codes distinguish the physical package and device configuration. Its compact BGA land pattern supports dense board layouts, although proper escape routing, thermal management, and careful power planning are essential for reliable implementation.
Technically, the EP4CE15F17C9LN is aimed at low-complexity programmable-logic designs where a small logic-element count is sufficient. It can be used as the central implementation device for control logic, protocol interfaces, state machines, and modest parallel datapaths. Configuration storage, clocking, I/O standards, and programming-chain integration must be designed around the requirements of the Cyclone IV E family.
Typical uses include industrial automation modules, sensor and motor-control interfaces, communication protocol converters, low-speed data acquisition, and embedded test equipment. The device is also appropriate for prototypes or production systems that benefit from field-programmable logic without requiring a high-end FPGA. Designs needing substantially more parallel resources or higher interface bandwidth should move to a larger member of the Cyclone IV E family.
During PCB design, treat the 256-pin FBGA as a fine-pitch BGA and follow the package-specific land pattern, via-in-pad or escape-routing guidance, and multilayer stack-up recommendations in the manufacturer documentation. Confirm every power, ground, configuration, clock, and user I/O connection against the pin-description table before releasing the layout.
This page consolidates the verified device identity, package details, sourcing information, comparison guidance, and practical implementation notes. It also highlights which engineering characteristics must be confirmed directly from the Altera product documentation before a new board or replacement design is released.
Alternativas drop-in para EP4CE15F17C9LN — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EP4CE15F17C9LN (mesmo formato e footprint) — diferindo em Device Type, Embedded Memory, Logic Elements, Package, Speed Grade.
EP4CE15F17C8N
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →EP4CE15F17C7N
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →EP4CE15F17C6N
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →EP4CE22F17C9LN
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
EP4CE6F17C9LN
✅ Drop-InConsulte o preço
Ver ficha técnica →EP4CE15F17C9LN Classificações máximas e características elétricas
| Device Type | FPGA |
| FPGA Family | Cyclone IV E |
| Logic Elements | 47 |
| Logic Blocks | 47 |
| Tensão de alimentação | 1.2 V |
| Encapsulamento | FBGA-256 |
| Package Code | F17 |
| Contagem de pinos | 256 pins |
| Tipo de montagem | Surface Mount |
Guia de Configuração de Pinos do EP4CE15F17C9LN f17
Configuração de pinos para EP4CE15F17C9LN (pacote f17). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para EP4CE15F17C9LN.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
EP4CE15F17C9LN é adequado para 6 aplicaçãos: Industrial Automation and Machine Control, Sensor Acquisition and Signal Conditioning, Communication Protocol Conversion, Motor Drive and Digital Control, Embedded Test and Measurement, Embedded and Prototyping Systems.
Industrial Automation and Machine Control
The EP4CE15F17C9LN fits compact machine-control logic where a 47-element Cyclone IV E FPGA can implement sequencing, interlocks, status decoding, and communication interfaces without a larger FPGA. The 1.2 V device operates from a managed core rail, while the 256-pin FBGA provides access to programmable I/O and configuration resources in a compact board area. Its value comes from combining parallel logic with flexible interface adaptation. Before layout release, verify the required I/O standards, timing margin, temperature range, and industrial qualification for the final equipment. Use the manufacturer pin table to assign clock, control, and field-bus signals, and reserve PCB resources for configuration storage and signal conditioning.
Recomendado
Sensor Acquisition and Signal Conditioning
The EP4CE15F17C9LN can implement parallel sensor aggregation, digital filtering, threshold detection, and data formatting when the required pipeline fits within its 47 logic elements. A small FPGA is useful when several sensors require deterministic sampling, timestamp capture, or interface conversion that would burden a microcontroller. The 1.2 V core supply supports integration into a controlled multi-rail design, and the 256-pin FBGA allows external converters and sensors to connect through programmable I/O. Verify input voltage tolerance, supported I/O standards, clock quality, and system timing in the EP4CE15F17 documentation. Pay particular attention to analog front-end isolation and grounding so digital switching does not degrade the measurement chain.
Recomendado
Communication Protocol Conversion
The EP4CE15F17C9LN is suitable for low-rate protocol bridges, frame formatting, CRC generation, FIFO control, and serial-to-parallel conversion when the design fits its 47-element capacity. Programmable logic can accommodate protocol variations and deterministic timing while preserving a simple host interface. The 256-pin FBGA supplies a substantial I/O complement for parallel buses, clocks, and control signals, and the 1.2 V core rail can be integrated with external transceiver circuitry. Validate every supported I/O standard and maximum interface frequency against the EP4CE15F17 documentation. Confirm that the selected configuration interface, clocking arrangement, and board-level transceiver levels meet the protocol requirements before using this device as a bridge.
Recomendado
Motor Drive and Digital Control
The EP4CE15F17C9LN can host deterministic control logic for pumps, fans, actuators, and compact motor systems when the algorithm can be implemented within 47 logic elements. Useful functions include six-step sequencing, commutation assistance, fault latching, PWM coordination, and protection-signal decoding. Its programmable I/O lets the design connect gate-driver control, position feedback, and fault inputs, while the 1.2 V core supply simplifies integration with adjacent digital control logic. Check timing paths carefully because PWM edge accuracy and feedback latency affect motor behavior. Also review the device's documented I/O voltage limits and use appropriate isolation or level translation when connecting to external power electronics.
Recomendado
Embedded Test and Measurement
The EP4CE15F17C9LN can serve as a flexible pattern generator, response checker, trigger controller, or data-capture formatter in compact test equipment. Reconfigurable logic allows the same hardware to support multiple stimulus formats and timing sequences, while 47 logic elements are adequate for modest parallel test channels and control paths. The 256-pin FBGA provides broad access to test pins, clocks, and status signals, and the 1.2 V core supply can be combined with precision analog and driver circuitry. Engineers should evaluate timing margin, I/O drive capability, clock-jitter sensitivity, and configuration repeatability for the intended instrumentation. Follow the manufacturer decoupling and layout guidance to prevent switching activity from disturbing sensitive measurement channels.
Recomendado
Embedded and Prototyping Systems
The EP4CE15F17C9LN is useful for prototypes, educational platforms, and compact embedded systems that require programmable hardware without the complexity of a large FPGA. It can implement custom peripheral logic, boot-time decision paths, test hooks, or parallel datapaths around a host processor. The device's 47 logic elements make it appropriate for modest functions rather than processor-heavy workloads, and the 256-pin FBGA rewards careful escape routing on a multilayer PCB. Confirm configuration-memory requirements, supported startup behavior, clock sources, and I/O assignments for the chosen board. The manufacturer application information and device documentation should guide pin planning, power sequencing, and programming-file generation, ensuring that the prototype can be transferred to a production design without changing the device interface.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EP4CE15F17C9LN — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | EP4CE15F17C8N | EP4CE15F17C7N | EP4CE15F17C6N | EP4CE22F17C9LN | EP4CE6F17C9LN |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | FBGA-256 (F17) | FBGA-256 (F17) | FBGA-256 (F17) | FBGA-256 (F17) | FBGA-256 (F17) | FBGA-256 (F17) |
| FPGA Family | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | C9 | C8 | C7 | C6 | C9 | C9 |
| Pin Count | 256 pins | 256 pins | 256 pins | 256 pins | 256 pins | 256 pins |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount |
Principais diferenciais
- Higher same-package logic capacity than the EP4CE6 comparison candidate (vs EP4CE6F17C9LN)
- Maintains the C9 speed suffix across the compared ordering variants (vs EP4CE15F17C8N)
- Pin-compatible F17 package while offering more resources than lower-capacity alternatives (vs EP4CE6F17C9LN)
Notas de projeto
Treat the EP4CE15F17C9LN as a 256-pin fine-pitch BGA and use the official F17 land pattern without shifting rows or columns. Plan a multilayer stack-up that permits short escape traces and low-impedance power distribution. Follow the manufacturer guidelines for via-in-pad, solder-mask design, thermal vias, and assembly tolerances. Incorrect ball assignment or an inconsistent footprint can create latent failures that appear only during soldering or high-temperature operation.
The device uses a 1.2 V core supply, so the power architecture must distinguish core, I/O, auxiliary, and configuration requirements identified in the manufacturer documentation. Place local decoupling at the associated power balls and use continuous reference planes where practical. Verify startup sequencing, voltage tolerances, current limits, and power-consumption estimates for the selected design. A valid logical design can still fail because of an inadequate plane, decoupling arrangement, or supply ramp.
Confirm each external interface's supported I/O standard, drive strength, input threshold, and maximum edge rate against the EP4CE15F17 documentation. Provide continuous return paths beneath high-speed routes and avoid unnecessary stubs or long vias. Clock signals deserve dedicated routing, source-synchronous spacing checks, and clock-tree analysis in the timing tool. If an external transceiver has a narrow common-mode or settling window, add matching or series damping only after signal-integrity analysis.
Do not select EP4CE15F17C9LN solely by package and speed suffix. A valid replacement must preserve required I/O, memory, timing, configuration, and temperature characteristics. Before releasing a substitute, compare the complete ball map, supported configuration methods, power pins, clock resources, and compiled design utilization. A lower-capacity device may fit the package physically yet fail compilation or timing, while a different suffix may introduce inadequate speed margin.
Informações de conformidade
Compliance status must be confirmed from the current manufacturer product documentation or declaration for the exact ordering part number.