Maxim Integrated

ICL7653CSA - Zero-Drift Chopper Op Amp | Maxim Integrated

MPN: ICL7653CSA ✓ نشط
10 uV typical Vdss 4 pA typical Id 8-pin SOIC Package
الحد الأدنى للطلب: 1 |

ICL7653CSA نظرة عامة

The Maxim Integrated ICL7653CSA is a single, zero-drift chopper-stabilized operational amplifier with a typical input offset voltage of 10 uV, typical input bias current of 4 pA, and operation over a single supply range of up to ±8 V. It is packaged in an 8-pin SOIC for precision analog signal-conditioning applications where low offset and low bias current are important.

An operational amplifier is a high-gain analog building block used to amplify differential voltage, buffer sensors, integrate signals, and drive feedback networks. The ICL7653 belongs to the chopper-stabilized operational-amplifier family, combining continuous-time signal handling with periodic correction of low-frequency offset and drift. This technique is especially useful in low-level instrumentation, bridge sensors, and precision current-feedback circuits.

The principal benefits are a 10 uV typical input offset voltage, 4 pA typical input bias current, and zero-drift operation. These characteristics reduce measurement errors caused by input mismatch and leakage, making the amplifier suitable for sensor interfaces where signals may be only millivolts in amplitude. The single-amplifier configuration also permits flexible gain, filtering, and feedback arrangements rather than fixing the application around a multi-channel device.

Chopper stabilization trades increased internal complexity for improved dc accuracy. The amplifier periodically corrects offset-related errors, while its internal correction network introduces periodic output artifacts around the chopping frequency. Layout, output filtering, and the selection of feedback components therefore influence whether those artifacts appear at the signal of interest. The ICL7653 is intended for low-level precision applications rather than high-speed waveform amplification.

Typical uses include bridge-transducer signal conditioning, low-current measurement, precision instrumentation, current-to-voltage conversion, and low-level sensor amplification. In these systems, the low bias current helps minimize loading of high-impedance sources, while the low offset voltage helps preserve accuracy near the input common-mode range. Each circuit must also provide suitable supply bypassing and account for output-noise components introduced by chopper correction.

For a new design, verify the required supply range, input common-mode range, output swing, stability, and noise spectrum against the Maxim Integrated ICL7653 manufacturer datasheet. Place input and output compensation or filtering components close to the amplifier pins, and observe the device's maximum total supply voltage. Because the ICL7653CSA is an 8-pin SOIC part, follow the numbered pin diagram and pin-description table when assigning PCB nets.

This page combines the ICL7653CSA's verified electrical characteristics, package information, sourcing details, application guidance, and replacement considerations. It also distinguishes documented drop-in candidates from related family members so engineers can evaluate PCB compatibility without assuming that similar amplifier specifications guarantee interchangeable operation.

بدائل مباشرة لـ ICL7653CSA — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع ICL7653CSA (نفس عامل الشكل والبصمة) — يختلف في Amplifier Type, Input Bias Current, Supply Voltage Range.

Maxim Integrated
Amplifier Type: Chopper-Stabilized Zero-Drift Operational Amplifier
Input Bias Current: 1.5 pA
Supply Voltage Range: 4.5 V to 16 V
قارن مع ICL7653CSA →

ICL7653BCSA

✅ بديل مباشر
📦 8-pin SOIC
Same ICL7653 family and documented ±8 V operating envelope, a 0 V difference; remaining grade-specific electrical limits require datasheet verification.

📋 بديل مرجعي (غير موجود في الكتالوج)

ICL7653CSA الحدود القصوى والخصائص الكهربائية

Amplifier Type Single chopper-stabilized operational amplifier
Input Offset Voltage 10 uV typical
Input Bias Current 4 pA typical
Supply Voltage Range Single ±8 V maximum
Zero-Drift Operation Yes
Number of Channels 1 channel
العلبة 8-pin SOIC
Package Width 3.90 mm
نوع التركيب Surface mount
Product Classification Linear amplifier, zero-drift, single circuit

دليل تكوين أطراف ICL7653CSA 3.90 mm

تكوين الأطراف لـ ICL7653CSA (حزمة 3.90 mm). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة 3.90 mm لـ ICL7653CSA

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ICL7653CSA.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ICL7653CSA مناسب لـ 6 التطبيقs: Bridge Transducer Signal Conditioning, High-Impedance Sensor Interface, Precision Current-to-Voltage Conversion, Low-Level Instrumentation Amplifier, Medical Signal Conditioning, Precision Test and Measurement.

🏭

Bridge Transducer Signal Conditioning

The ICL7653CSA fits low-level bridge-sensor front ends because its 10 uV typical input offset voltage and 4 pA typical input bias current reduce errors relative to small differential signals. It can amplify the bridge output in a differential configuration while preserving accuracy near the sensor output level. Place the device close to the bridge and reference network, provide local supply bypassing, and evaluate chopping-frequency components before filtering them at the amplifier output.

🧩

High-Impedance Sensor Interface

The ICL7653CSA is appropriate for high-impedance sensor interfaces because its 4 pA typical input bias current limits the voltage error introduced by finite source impedance. Combined with a 10 uV typical input offset voltage, it can preserve weak sensor outputs better than a general-purpose amplifier with higher bias current. The circuit should still verify input common-mode limits, leakage from PCB contamination, guarding, and output-noise behavior under the required source resistance.

⚡

Precision Current-to-Voltage Conversion

The ICL7653CSA can serve as the transimpedance element in a precision current-to-voltage converter when both signal current and source impedance are small. Its 4 pA typical bias current limits the error caused by current flowing into the input, and its 10 uV typical offset supports accurate measurement of low-level currents. Select feedback resistance carefully because noise gain, stability, bandwidth, and parasitic capacitance determine the achievable conversion ratio and response.

🔬

Low-Level Instrumentation Amplifier

The ICL7653CSA can be used in a discrete instrumentation-amplifier topology where low offset and low bias current are needed for a differential sensor signal. Two amplifier inputs can establish gain and common-mode rejection while a third amplifier provides a stable reference or output-buffer function in a multi-amplifier design. Matching resistor networks carefully and confirming each amplifier's common-mode range and output swing are essential because dc accuracy alone does not guarantee system-level rejection.

💊

Medical Signal Conditioning

The ICL7653CSA is suitable for low-amplitude biomedical signal conditioning when dc offset from the electrodes or sensing element must be rejected. Its 10 uV typical input offset voltage and 4 pA typical input bias current support low-error amplification, while the 8-pin SOIC package allows a compact analog layout. Medical designs must still address patient protection, input protection, isolation, leakage, noise, application-specific qualification, and all applicable regulatory requirements.

🖥️

Precision Test and Measurement

The ICL7653CSA can amplify small differential signals in bench instruments, programmable supplies, and measurement modules where offset drift would otherwise impair accuracy. The 10 uV typical input offset and 4 pA typical bias current are useful near the measurement floor, while external calibration can compensate fixed system error. Designers should characterize chopping-related spectral components, configure compensation correctly, and ensure the chosen loop gain provides adequate bandwidth and phase margin.

ملخص المنتجات الموصى بها

ICL7653CSA Maxim Integrated يُستخدم في: Bridge Transducer Signal Conditioning, High-Impedance Sensor Interface, Precision Current-to-Voltage Conversion, Low-Level Instrumentation Amplifier, Medical Signal Conditioning, Precision Test and Measurement ICL7653BCSA Related ICL7653 chopper-stabilized family member يُستخدم في: Bridge Transducer Signal Conditioning, High-Impedance Sensor Interface, Precision Current-to-Voltage Conversion, Low-Level Instrumentation Amplifier, Medical Signal Conditioning, Precision Test and Measurement
What is the ICL7653CSA?
The ICL7653CSA is a single zero-drift chopper-stabilized operational amplifier designed for precision low-level signal processing. According to the Maxim Integrated ICL7653 manufacturer datasheet information, it provides a typical input offset voltage of 10 uV and typical input bias current of 4 pA. The device is offered in an 8-pin SOIC package and operates from a single supply with a maximum total range of ±8 V.
What are the key specifications of ICL7653CSA that engineers should know?
The ICL7653CSA combines 10 uV typical input offset voltage, 4 pA typical input bias current, and zero-drift operation in an 8-pin SOIC. Its single-amplifier architecture supports external feedback and gain configuration. According to the Maxim Integrated ICL7653 manufacturer datasheet information, the maximum single supply range is ±8 V. Consult that datasheet for gain-bandwidth, slew-rate, common-mode, and output-swing limits before finalizing a circuit.
Where can I download the ICL7653CSA datasheet PDF?
The ICL7653CSA datasheet PDF can be opened through the electronic component document listing at icDirectory, while the ICL7653 family documentation is also indexed on Datasheet4u. The manufacturer datasheet is the authoritative source for the pin-description table, electrical characteristics, typical application circuits, and ordering information. Use the pin-description table rather than a marketplace illustration when assigning nets on the 8-pin SOIC footprint.
Where can I find the ICL7653CSA pinout?
The ICL7653CSA pinout is documented in the manufacturer datasheet and can also be reviewed through the ICL7653 pinout resources indexed online. The package is an 8-pin SOIC, so every PCB footprint must provide all eight numbered positions plus the normal power and ground connections. Use the datasheet pin-description table to verify compensation, strobe, and supply functions before routing the board.
What is the difference between ICL7653CSA and ICL7653BCSA?
The ICL7653CSA is the identified 8-pin SOIC ordering variant, while ICL7653BCSA is another member of the ICL7653 chopper-stabilized amplifier family. The available comparison information confirms the family relationship but does not state every temperature-grade or electrical limit for ICL7653BCSA. Before substitution, compare the two datasheets for offset voltage, bias current, supply range, temperature rating, and every pin function rather than relying only on the shared family name.
When should I choose the ICL7653CSA over a conventional precision op amp?
Choose the ICL7653CSA when low-frequency input offset and drift dominate the measurement error. Its 10 uV typical offset voltage and 4 pA typical bias current are especially helpful with low-level sensor signals and high-impedance sources. A conventional precision amplifier may be preferable when its noise behavior, bandwidth, slew rate, or operating supply is better matched to a fast or high-signal-level design.
What is the best drop-in replacement for ICL7653CSA?
No alternative can be identified as a confirmed drop-in replacement from the available cross-reference results. A true replacement must preserve the 8-pin SOIC footprint, every pin function, the ±8 V maximum supply range, and critical offset, bias-current, bandwidth, and common-mode characteristics. Use the ICL7653CSA manufacturer datasheet as the comparison baseline and verify any candidate at the electrical and PCB levels before approving it for production.
Can ICL7653BCSA replace ICL7653CSA?
ICL7653BCSA may be a related family member, but the available information does not confirm that every pin and electrical characteristic is identical to ICL7653CSA. Before using it as a replacement, compare the manufacturer datasheets for package drawing, numbering, strobe behavior, compensation requirements, temperature range, and principal dc and ac parameters. A shared amplifier family alone does not establish drop-in compatibility.
What can replace ICL7653CSA in a precision circuit?
A precision chopper-stabilized amplifier in an 8-pin SOIC is the relevant replacement class, but the available cross-reference results do not identify a verified, pin-compatible substitute. Start with the ICL7653CSA electrical limits and then screen candidates by package, pinout, input bias current, offset voltage, supply voltage, common-mode range, bandwidth, and chopper-frequency behavior. Do not assume that a generic low-offset amplifier is interchangeable.
Is ICL7653CSA suitable for low-level instrumentation?
Yes, the ICL7653CSA is suitable for low-level instrumentation when its dc accuracy and bias-current characteristics outweigh its bandwidth limitations. The 10 uV typical input offset voltage limits much of the static input-referred error, while 4 pA typical bias current reduces loading of high-impedance sensors. Signal-chain gain, output-noise spectrum, supply bypassing, and input common-mode limits still require verification.
Where can I buy ICL7653CSA online?
Use the Request a Quote form on this page to request ICL7653CSA availability, commercial terms, and lead time. The electronic listings indexed for this exact MPN include Rochester Electronics inventory, while an electronic component directory records a unit price of USD 0.78. Current allocation and shipment timing should be confirmed through the quote workflow rather than assumed from historical listing data.
What is the price of ICL7653CSA?
The latest indexed unit listing for ICL7653CSA shows USD 0.78 per unit as of November 2026, but the listing does not provide qualifying quantity-break tiers. Current transactional terms can change, and platform pricing may reflect additional sourcing conditions. Use the Request a Quote form on this page for the current price, available quantity, and lead time.
What is the lead time for ICL7653CSA?
The current lead time for ICL7653CSA should be confirmed through the Request a Quote form on this page. The indexed listings show electronic inventory activity, including a directory stock count, but a historical stock figure does not establish current factory lead time or future allocation. Provide the required quantity, date code requirement, and target shipment region with the request.
Is ICL7653CSA in stock?
ICL7653CSA is shown as active, and the indexed electronic component directory reported 4,200 units in stock when the page was captured in November 2026. Stock can change quickly and may not reflect current warehouse position. Use the Request a Quote form on this page to confirm current availability, allocation quantity, date code, and dispatch schedule.
How does chopper stabilization affect an ICL7653CSA circuit?
Chopper stabilization reduces low-frequency input offset and drift in the ICL7653CSA by periodically correcting amplifier errors. The correction process can introduce periodic output components around the chopping frequency, which may appear as narrow-band noise or ripple in sensitive measurements. Output filtering, careful grounding, and gain selection help control these artifacts; use the manufacturer application guidance to select suitable compensation and external filter values.

بيانات مرجعية هندسية لـ ICL7653CSA — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the ICL7653CSA when your circuit needs a single precision op amp with zero-drift behavior, a documented 10 uV typical offset voltage, and a 4 pA typical input bias current. It is especially suitable for bridge sensors, high-impedance sources, low-level current measurement, instrumentation, and biomedical conditioning where static input error is more important than wideband slew performance. ICL7653BCSA is the only related candidate identified for comparison, but it should not be approved as a drop-in without verifying every pin function and electrical limit. For high-speed, high-output-current, or lower-cost conventional precision-amplifier designs, the ICL7653CSA may be unsuitable because its chopper architecture prioritizes dc accuracy over wideband performance.

المقارنة مع البدائل

المعامل هذا المنتج ICL7653BCSA
Brand Maxim Integrated Maxim Integrated
Package 8-pin SOIC 8-pin SOIC
Amplifier Configuration Single amplifier Single amplifier
Stabilization Method Chopper stabilized, zero drift Chopper stabilized
Maximum Supply Range ±8 V ±8 V

أبرز الفروقات

  • Low offset voltage for precision dc measurement (مقابلICL7653BCSA)
  • Very low input bias current (مقابلICL7653BCSA)
  • Single-amplifier 8-pin SOIC implementation (مقابلICL7653BCSA)

ملاحظات التصميم

Route the ICL7653CSA input, output, and compensation connections with short traces and keep high-impedance nodes away from switching nodes and noisy digital paths. Place compensation components directly at their associated pins to minimize parasitic feedback. Because chopper correction can introduce narrow-band artifacts, reserve an output-filter location and determine its corner frequency from the signal bandwidth and measured noise spectrum.

Follow the manufacturer datasheet guidance for supply decoupling and place the required bypass capacitor close to the device's supply and ground pins. Check the actual supply combination against the ±8 V maximum range, including tolerance, transients, and startup overshoot. The amplifier's low offset voltage does not protect it from supply disturbance, so power-supply noise and ground-return design remain important parts of the measurement error budget.

Do not treat ICL7653BCSA as an automatic substitute for ICL7653CSA solely because both names contain ICL7653. Verify the complete pin-description table, package drawing, temperature grade, supply limits, input common-mode range, compensation requirements, and electrical characteristics. Preserve the documented strobe behavior and avoid enabling an unintended operating condition; the family relationship alone is insufficient proof of production interchangeability.

Characterize the amplifier output over the frequency range of interest because chopper correction introduces periodic components that may not be apparent in ordinary dc measurements. Use an oscilloscope or spectrum analyzer to observe the correction-related region, then choose filtering that suppresses those components without disrupting the required signal bandwidth. Avoid overstating closed-loop bandwidth when a narrow notch filter or an external compensation network is added.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

Compliance status was not stated in the manufacturer or distributor information and must be confirmed using the manufacturer datasheet or product documentation.

تم التحقق من البيانات في: 2026-11-20 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ICL7653CSA datasheet ICL7653CSA pinout ICL7653CSA datasheet pdf ICL7653CSA specifications ICL7653CSA equivalent ICL7653CSA replacement ICL7653CSA vs ICL7653BCSA ICL7653CSA SOIC-8 pinout ICL7653 zero drift op amp ICL7653CSA price ICL7653CSA stock Maxim Integrated ICL7653CSA

المكونات والمصطلحات ذات الصلة

Maxim Integrated ICL7653CSA ICL7653BCSA chopper-stabilized operational amplifier zero-drift operational amplifier precision operational amplifier single operational amplifier input offset voltage input bias current chopper stabilization signal conditioning instrumentation amplifier transimpedance amplifier bridge sensor high-impedance sensor low-level current measurement 8-pin SOIC SOIC package family surface-mount package analog signal chain supply bypass capacitor common-mode voltage range gain-bandwidth product slew rate RoHS REACH
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر