Renesas Electronics

ICS513MLF - 140MHz Clock Generator | Renesas Electronics

MPN: ICS513MLF ✓ نشط
4.5 V to 5.5 V Vdss 8-SOIC (0.154 inch, 3.90 mm width) Package 140 MHz Speed
الحد الأدنى للطلب: 1 |

ICS513MLF نظرة عامة

Renesas Electronics ICS513MLF is a LOCO PLL clock-generator and fanout distribution IC rated to 140 MHz, with one clock output in an 8-pin SOIC package measuring 0.154 inches wide and 3.90 mm. It operates from a 4.5 V to 5.5 V supply and uses CMOS-compatible interfaces. The device is designed to generate a stable, high-quality clock from a 14.31818 MHz crystal or external clock input.

A PLL clock generator is a clock-timing semiconductor that multiplies a reference frequency and distributes the resulting clock to digital circuits. A crystal reference provides a stable time base, while the internal phase-locked loop derives the required output frequency. Clock-generator ICs belong to the clock and timing hierarchy, where they sit between frequency references and the clocks consumed by processors, communications equipment, and digital logic.

ICS513MLF combines a 140 MHz maximum stated operating frequency with a single clock output and a 5 V supply range. Its LOCO positioning emphasizes a cost-effective implementation for common digital clocking needs. The lead-free 8-SOIC package supports conventional surface-mount assembly and is suitable for compact industrial, communications, and embedded systems that need a local clock source without employing a more complex high-performance frequency synthesizer.

The device operates with CMOS-compatible signals and can use either a 14.31818 MHz crystal or a clock input as its frequency reference. During implementation, the crystal, load capacitance, supply decoupling, and output-drive configuration determine whether the generated clock meets the timing and jitter requirements of the downstream circuit. The manufacturer datasheet should be consulted for the exact reference configuration and electrical limits before finalizing a high-speed design.

Typical uses include clocking digital controllers, standardizing clock distribution across a compact circuit board, and replacing a board-level oscillator plus divider arrangement with a single timing IC. The single-output configuration is especially appropriate when only one derived clock is needed. In multi-domain equipment, the ICS513MLF can supply a common local clock where clock quality and frequency are adequate but multi-output fanout or differential clocking is not required.

PCB implementation requires short return paths and careful treatment of the crystal and high-speed clock traces. Place the reference components close to the device, connect the supply to a low-impedance ground plane, and route clock outputs away from noisy switching nodes. Verify output rise time, duty cycle, jitter, and load capacitance in the finished layout because the complete timing performance depends on component selection and board implementation.

This page combines the identified electrical ratings, package details, sourcing guidance, and application-oriented design considerations for ICS513MLF. It also distinguishes the device from related clock-generator references while clearly identifying parameters that require confirmation against the manufacturer datasheet before production release.

بدائل مباشرة لـ ICS513MLF — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع ICS513MLF (نفس عامل الشكل والبصمة) — يختلف في Device Type.

Renesas Electronics
Device Type: LOCO PLL clock generator and fanout distribution IC
قارن مع ICS513MLF →

ICS513M

✅ بديل مباشر
Renesas Electronics
📦 8-SOIC (0.154 inch, 3.90 mm width)
LOCO PLL clock generator and fanout distribution IC · 140 MHz · 1 · Yes, with bypass · Crystal or clock · CMOS · 1:2 · 14.31818 MHz

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ICS513MLF المواصفات

Device Type Clock Generator, Fanout Distribution IC
Maximum Operating Frequency 140 MHz
عدد المخارج 1 output
Supply Voltage Range 4.5 V to 5.5 V
Reference Input Frequency 14.31818 MHz
Clock Architecture LOCO PLL
Bus Interface CMOS
Package Type 8-SOIC (0.154 inch, 3.90 mm width)
نوع التركيب Surface Mount
Lead-Free Status Lead-free
Product Category Clock Generators, PLLs, Frequency Synthesizers
تكوين الخرج Single CMOS clock output
Phase-Locked Loop Configuration LOCO PLL multiplier
حالة RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

دليل تكوين أطراف ICS513MLF 8-soic (0.154 inch, 3.90 mm width)

تكوين الأطراف لـ ICS513MLF (حزمة 8-soic (0.154 inch, 3.90 mm width)). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 8-soic (0.154 inch, 3.90 mm width) لـ ICS513MLF

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ICS513MLF.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ICS513MLF مناسب لـ 6 التطبيقs: Digital Controller Clocking, Communications Equipment Timing, Industrial Control Logic, Data Conversion and Interface Timing, Test and Measurement Front Ends, Embedded System Clock Distribution.

⚡

Digital Controller Clocking

ICS513MLF fits digital controllers that require one local clock generated from a 14.31818 MHz crystal and a 5 V supply. The device provides a single CMOS output and supports a stated operating frequency up to 140 MHz, making it appropriate for logic, control, and embedded subsystems that need a stable local timing reference without a multi-output synthesizer. Its 8-SOIC footprint simplifies conventional surface-mount assembly, while the LOCO PLL architecture avoids building an oscillator, divider, and output buffer as separate components. Confirm output jitter, duty-cycle limits, fanout, and load capacitance against the target controller requirements, and place the reference network close to the IC.

🌐

Communications Equipment Timing

ICS513MLF can supply a local derived clock for communications equipment built around a 5 V CMOS logic domain. A 14.31818 MHz crystal reference and the LOCO PLL stage allow the circuit to obtain the required operating clock without implementing discrete frequency synthesis. The single-output arrangement suits a board section with one timing domain, while the 140 MHz stated rating provides headroom for moderately fast digital processing. Keep the crystal path short, maintain a continuous ground reference under the device, and isolate the clock route from switching-power and high-current return paths to minimize timing disturbance.

🏭

Industrial Control Logic

ICS513MLF is suitable for industrial control logic requiring a compact, dedicated clock source on a 5 V rail. The device’s 140 MHz stated operating frequency and single CMOS output can support processor, state-machine, or interface clocking where one common clock is sufficient. Its 8-SOIC package is well suited to automated PCB assembly and can simplify BOM consolidation by replacing separate oscillator and divider circuitry. In industrial equipment, follow the manufacturer grounding and decoupling guidance, route the clock away from relays and power-converter stages, and verify stability across the intended supply tolerance and ambient conditions.

🖥️

Data Conversion and Interface Timing

ICS513MLF can provide a common clock for data-conversion or interface circuitry operating in a 4.5 V to 5.5 V domain. The one-output CMOS architecture is useful when an ADC, DAC, serializer, or digital interface requires a locally generated clock but does not need multiple independently programmable frequencies. Because timing quality depends on the complete implementation, evaluate jitter, duty-cycle distortion, output rise time, and load behavior using the manufacturer test conditions and the actual PCB. Keep the crystal and clock traces compact and provide a low-impedance return path to reduce susceptibility to coupled noise.

🔧

Test and Measurement Front Ends

ICS513MLF can establish a local timing reference in compact test and measurement front ends that operate from a 5 V supply. Its 140 MHz stated capability and single CMOS output suit instrument control, acquisition, calibration, and synchronization blocks that need a repeatable digital clock. The 8-SOIC package allows placement close to the timing-consuming circuitry and supports conventional surface-mount production. For sensitive measurements, use a continuous ground plane, minimize clock-trace coupling, and validate jitter and edge quality with the actual cable, probe, and switching loads rather than relying only on unloaded output data.

🧩

Embedded System Clock Distribution

ICS513MLF is useful in embedded subsystems that need one synchronized CMOS clock for a processor, programmable logic, or peripheral group. A 14.31818 MHz crystal reference and the internal LOCO PLL provide a compact clock source in an 8-SOIC package, reducing the component count compared with discrete oscillator and divider arrangements. Because this is a single-output device, it is most appropriate when the subsystem does not require multiple divided clocks or independently buffered domains. Validate maximum fanout, input capacitance, startup time, and power-supply noise tolerance, and preserve short return paths beneath the timing network.

What is the operating frequency of ICS513MLF?
The ICS513MLF is specified for operation up to 140 MHz. According to the Renesas Electronics product listing, the device is a clock-generator and fanout-distribution IC rated at 140 MHz with one output. It can generate a high-quality clock from a 14.31818 MHz crystal or an external clock reference, making it suitable for digital systems that do not require a high-performance multi-output timing architecture.
What is the supply voltage of ICS513MLF?
The ICS513MLF operates from 4.5 V to 5.5 V. The manufacturer datasheet identifies a CMOS bus interface and a nominal 5 V operating range. Decouple the supply close to the device with a local ground-plane connection, and verify signal levels, trace length, and clock-edge requirements against the electrical characteristics before using the output to drive another device.
Where can I download the ICS513MLF datasheet PDF?
The ICS513MLF datasheet PDF is available through the Renesas Electronics product documentation associated with the ICS513 family. The indexed manufacturer-derived data sheet identifies the ICS513 as a LOCO PLL clock generator using a 14.31818 MHz crystal or clock input. Use the manufacturer datasheet for the authoritative pin description, application circuit, crystal-load selection, and electrical-characteristic limits.
Where can I find the ICS513MLF pinout?
The ICS513MLF pinout is documented in the manufacturer pin-description table for the 8-SOIC package. The part uses pin 1 at the upper-left side of the SOIC body when the pin-1 marker is oriented upward, with numbering proceeding counterclockwise around the package. Confirm every signal name and the exposed package characteristics against the ICS513 datasheet before assigning PCB nets.
Can ICS513MLF generate a clock from a 14.31818 MHz crystal?
Yes. The ICS513MLF is designed to generate a high-quality, high-frequency clock from a 14.31818 MHz crystal or clock input. Its LOCO PLL topology multiplies the reference to generate the required output frequency. The crystal and its load capacitance must be selected using the manufacturer reference circuit, and board parasitics should be included when evaluating startup and frequency stability.
Where can I buy ICS513MLF online?
Use the Request a Quote form on this page to request ICS513MLF availability, current lead time, and order quantities. The form is the appropriate route for an exact-match sourcing request and avoids confusing the MLF package code with another ICS513 ordering variant. Specify the required quantity, target date, and acceptable packaging configuration in the request.
What is the price of ICS513MLF?
Use the Request a Quote form on this page for the current price of ICS513MLF. Commercial terms can change with quantity, inventory, and packaging, so the page’s pricing workflow should be used rather than a static quotation in technical content. Include the required order quantity and production quantity in the request so the quote reflects the intended purchasing schedule.
What is the lead time for ICS513MLF?
Request the current ICS513MLF lead time through the Request a Quote form on this page. Lead time depends on order quantity, production scheduling, and the exact package suffix, which is why a confirmed schedule is more useful than a generic estimate. Provide the required quantity, target delivery date, and acceptable shipment destinations when requesting the quotation.
Is ICS513MLF in stock?
Current ICS513MLF inventory should be confirmed through the Request a Quote form on this page. A distributor search page may show historical or changing availability, while the quote workflow can establish the quantity that can be allocated for a particular order. Include the required quantity and target date so the response reflects the intended production demand.
What can replace ICS513MLF?
ICS513M is the closest identified replacement candidate because it is also described as an 8-SOIC PLL clock generator. A true drop-in substitution must match the SOIC-8 footprint, pin assignments, supply range, reference frequency, output configuration, and timing performance. Confirm those details in the manufacturer datasheets before approving a replacement for production.
Is ICS513M the same as ICS513MLF?
ICS513M and ICS513MLF are closely related Renesas Electronics timing-device designations, and both are listed in 8-SOIC packages. ICS513MLF specifically identifies the 140 MHz, one-output clock-generator configuration. The exact ordering options and environmental or qualification differences should be checked against the manufacturer ordering information before treating ICS513M as an unqualified substitute.
What is the best Renesas equivalent for ICS513MLF?
ICS513M is the best identified Renesas-family candidate because its listing describes an 8-SOIC PLL clock generator, matching the target package and core device function. Its suitability as a drop-in replacement depends on confirming identical pinout, reference configuration, maximum frequency, output count, and supply range. Complete that comparison against both datasheets before committing to a new PCB or production order.
ICS513MLF vs ICS513M - which is better for a digital controller?
Choose ICS513MLF when the design specifically requires its listed 140 MHz capability and one-output clock-generator configuration. Consider ICS513M when its manufacturer ordering information confirms equivalent frequency, pinout, reference, and supply requirements for the intended controller. The available family information supports both as 8-SOIC PLL clock generators, but it does not establish every production-level characteristic as identical.
When should I choose ICS513MLF instead of another clock generator?
Choose ICS513MLF when a compact design needs one CMOS clock output derived from a 14.31818 MHz crystal or clock input, with a 4.5 V to 5.5 V supply and a 140 MHz stated operating frequency. It is appropriate for conventional digital control and communication circuitry. Select a more specialized generator when the system requires multiple outputs, differential clocking, lower jitter, programmable frequencies, or a different package and pinout.
Is ICS513MLF suitable for a 5 V digital system?
Yes. ICS513MLF is intended for a 4.5 V to 5.5 V supply range and provides a CMOS-compatible clock output. It fits a 5 V digital system that uses a 14.31818 MHz reference and needs one derived clock at up to the stated 140 MHz operating frequency. Check timing margin, fanout, load capacitance, jitter, and startup behavior in the target circuit.
What are the key specifications of ICS513MLF that engineers should know?
ICS513MLF is a one-output LOCO PLL clock generator rated to 140 MHz and packaged in an 8-SOIC. It operates from 4.5 V to 5.5 V, supports CMOS signals, and can use a 14.31818 MHz crystal or clock input. The package is lead-free, but detailed RoHS and REACH status, operating-temperature limits, jitter, and drive strength should be confirmed from the manufacturer documentation.

بيانات مرجعية هندسية لـ ICS513MLF — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose ICS513MLF for a compact 5 V design that needs one derived CMOS clock from a 14.31818 MHz crystal or clock input, particularly when a stated 140 MHz operating capability and an 8-SOIC footprint are important. Consider ICS513M when its manufacturer ordering information confirms the same pinout, reference configuration, output count, frequency rating, and environmental requirements. Neither candidate should be selected for designs requiring multiple outputs, differential clocks, programmable multiplication beyond the LOCO PLL use case, or particularly low jitter without a separate engineering comparison. The single-output architecture also makes ICS513MLF less suitable for a board containing several unrelated clock domains. Before final selection, check the reference-load calculation, maximum fanout, output timing, supply tolerance, and package details against the complete system requirements.

المقارنة مع البدائل

المعامل هذا المنتج ICS513M
Brand Renesas Electronics Renesas Electronics
Package 8-SOIC (0.154 inch, 3.90 mm width) 8-SOIC (0.154 inch, 3.90 mm width)
Device Type Clock Generator, Fanout Distribution IC PLL Clock Generator

أبرز الفروقات

  • Single-output clock generation in a conventional 8-SOIC package (مقابلICS513M)
  • Defined operating-frequency capability (مقابلICS513M)
  • 5 V CMOS integration (مقابلICS513M)

ملاحظات التصميم

Place the 14.31818 MHz crystal and its load network directly beside the reference pins, using the shortest practical ground return. Keep the clock output route short and avoid routing it parallel to switching-node or high-current traces. A continuous ground plane beneath the timing section provides a lower-impedance return path and reduces coupling into the reference and output nets.

Place the supply-decoupling capacitor close to the 5 V and ground connections, and verify the capacitor selection against the manufacturer requirements. The supported 4.5 V to 5.5 V range leaves room for a conventional 5 V rail, but supply ripple and transient energy can affect clock-edge quality. Confirm the final rail tolerance and decoupling arrangement in the target system rather than assuming ideal supply behavior.

Do not treat every ICS513 ordering code as an automatic drop-in substitute without checking the pin description and electrical limits. The target uses one output and is identified at 140 MHz, while related family members may differ in temperature grade, frequency, or ordering options. Verify pinout, reference input, output count, supply range, output loading, and package before approving a replacement.

Evaluate output rise time, duty cycle, jitter, and load capacitance with the actual receiver and PCB geometry. A CMOS clock can be sensitive to excessive capacitive loading and improperly terminated stubs. Keep fanout modest, use series damping only where timing analysis supports it, and avoid long point-to-point clock routes when downstream devices can provide a more stable reference.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Yes
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The identified package information describes ICS513MLF as lead-free. RoHS, REACH, halogen-free, and conflict-minerals status were not established and are therefore recorded as unknown.

تم التحقق من البيانات في: 2026-11-16 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ICS513MLF datasheet ICS513MLF specifications ICS513MLF pinout ICS513MLF datasheet pdf Renesas ICS513MLF ICS513MLF 140MHz clock generator ICS513MLF 8-SOIC ICS513MLF application circuit ICS513MLF equivalent ICS513MLF replacement ICS513MLF vs ICS513M ICS513MLF price ICS513MLF stock ICS513MLF schematic ICS513MLF footprint

المكونات والمصطلحات ذات الصلة

Renesas Electronics ICS513MLF ICS513M LOCO PLL clock generator clock generator fanout distribution IC frequency synthesizer clock and timing IC CMOS 140 MHz 14.31818 MHz crystal 4.5 V to 5.5 V 8-SOIC SOIC-8 surface mount SMD semiconductor clock jitter output duty cycle industrial control communications equipment embedded systems
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر