إشعار الشراء الأخير: ICS552R-01 يقترب من نهاية العمر الإنتاجي. آخر موعد للطلب: تواصل معنا. عرض القطع البديلة المتاحة →
Renesas Electronics

ICS552R-01 - 200MHz 8-Output CMOS Clock Multiplier | Renesas

MPN: ICS552R-01 ✗ انتهى عمره الإنتاجي
3 V to 5.5 V Vdss 20-SSOP, 0.154 inch (3.90 mm) width Package 200 MHz Speed
الحد الأدنى للطلب: 1 |

ICS552R-01 نظرة عامة

Renesas Electronics ICS552R-01 is a clock generator, multiplier, and buffer that produces eight low-skew CMOS copies of a clock or a fundamental parallel-mode crystal, with a maximum frequency of 200MHz. The device is available in a 20-pin SSOP package with a 3 V to 5.5 V supply range. Its one-to-eight input-to-output ratio supports designs that need multiple synchronized clock copies without using eight separate oscillators.

A clock multiplier is a clock and timing IC that accepts a reference signal, derives a higher-frequency clock, and distributes the result across multiple outputs. Within the electronics hierarchy, it belongs to clock generation and timing, then to clock and timing ICs, and finally to integrated circuits. Unlike a conventional crystal oscillator, the ICS552R-01 family can operate directly from a multiple input clock or a fundamental parallel-mode crystal, providing design flexibility for synchronous digital systems.

Key features include eight low-skew outputs, CMOS output technology, PLL capability, and operation up to 200MHz. The one-to-eight output ratio is useful when multiple logic domains require related clocks. A 3 V to 5.5 V supply range permits integration with both 3.3 V and 5 V digital systems, while the 20-SSOP surface-mount format supports compact PCB layouts. The 0°C to 70°C range applies to the identified commercial-temperature variants; other ordering codes may represent different temperature grades.

The ICS552R-01 combines clock generation, multiplication, and fan-out functions in one package. Each of the eight outputs provides a low-skew copy of the derived clock, reducing the number of separate clock-driver circuits required when several processors, FPGAs, memory devices, or communication controllers must receive related clock signals. The PLL architecture and broad maximum operating frequency make the device useful when the source clock does not directly match the required system frequency.

Typical applications include synchronous processor clock distribution, FPGA or ASIC clock fan-out, memory-controller clock distribution, communications-interface clocking, and general-purpose digital clock trees. It is especially relevant when one source must feed multiple loads while maintaining consistent frequency relationships. The device also supports systems that prefer external fundamental crystals or externally generated multiple clocks over a dedicated oscillator.

When laying out the circuit, treat all eight outputs as high-speed clock nets and follow the manufacturer’s recommended termination and decoupling arrangements. Keep clock traces short, provide a continuous ground reference, and avoid routing outputs through uncontrolled impedance discontinuities. Confirm output-drive, jitter, skew, and load-current requirements against the manufacturer datasheet before choosing series termination or a fan-out topology.

This product page combines the ICS552R-01 operating limits with practical clock-distribution guidance, ordering-code distinctions, lifecycle considerations, and a comparison framework for evaluating compatible 20-SSOP alternatives. Use the manufacturer pin-description table and electrical characteristics as the final authority for board implementation and production qualification.

بدائل مباشرة لـ ICS552R-01 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

ICS552R-01T

✅ بديل مباشر
📦 20-SSOP
Same 200MHz, eight-output clock architecture and 20-SSOP footprint; ordering-code temperature or marking differences are not stated in the available result.

📋 بديل مرجعي (غير موجود في الكتالوج)

ICS552R-01IT

✅ بديل مباشر
📦 20-SSOP
Same 200MHz maximum frequency, one circuit, eight-output ratio, and 20-SSOP package; suffix-specific temperature-grade differences are not stated.

📋 بديل مرجعي (غير موجود في الكتالوج)

ICS552R-01CIT

✅ بديل مباشر
📦 20-SSOP
Same 20-SSOP and 3 V to 5.5 V family architecture; the documented commercial temperature range is 0°C to 70°C, while the target suffix range is not stated.

📋 بديل مرجعي (غير موجود في الكتالوج)

ICS552R-01C

✅ بديل مباشر
📦 20-SSOP
Same 20-SSOP and 3 V to 5.5 V family architecture; documented commercial temperature range is 0°C to 70°C, while the target suffix range is not stated.

📋 بديل مرجعي (غير موجود في الكتالوج)

ICS552R-01 المواصفات

Device Type Clock Generator, Multiplexer, Oscillator, Multiplier, and Buffer
Maximum Frequency 200 MHz
عدد المخارج 8 outputs
Input-to-Output Ratio 1:8
نوع الخرج CMOS
PLL Yes
Supported Inputs Clock or crystal
Supply Voltage Range 3 V to 5.5 V
Commercial Operating Temperature Range 0°C to 70°C
العلبة 20-SSOP, 0.154 inch (3.90 mm) width
نوع التركيب Surface mount
Number of Circuits 1
Differential Input No

دليل تكوين أطراف ICS552R-01 20-ssop, 0.154 inch (3.90 mm) width

تكوين الأطراف لـ ICS552R-01 (حزمة 20-ssop, 0.154 inch (3.90 mm) width). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 20-ssop, 0.154 inch (3.90 mm) width لـ ICS552R-01

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ICS552R-01.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ICS552R-01 مناسب لـ 6 التطبيقs: FPGA Clock Distribution, Processor Clock Fan-Out, ASIC and Memory Clock Tree, Communications Interface Clocking, Synchronous Digital Instrumentation, General-Purpose Digital Clock Tree.

🔧

FPGA Clock Distribution

The ICS552R-01 fits an FPGA clock tree that needs several related outputs from one source. Its eight low-skew CMOS outputs and 200MHz maximum frequency allow one derived clock to feed multiple FPGA clock inputs without using eight separate buffer packages. The device can accept an external clock or fundamental parallel-mode crystal and use its PLL function to produce the required multiple. In implementation, verify the selected multiplier ratio against the FPGA target frequency, keep output traces short, provide a continuous ground plane, and confirm that each output has sufficient drive for its load. The main benefit is consolidation: clock multiplication and fan-out are combined in one 20-SSOP device, although timing margin still depends on PCB loading and jitter.

🖥️

Processor Clock Fan-Out

The ICS552R-01 can distribute a derived clock to multiple processor, controller, or accelerator input domains. Its one-to-eight ratio provides eight low-skew copies from a clock or fundamental crystal reference, reducing the number of separate clock-driver stages in a system with several destination loads. At frequencies up to 200MHz, output-edge quality and propagation relationships become central to timing closure. Place the device close to the clock source, route outputs as controlled-impedance traces, avoid unnecessary stubs, and match output loading across branches when skew-sensitive relationships are required. The ICS552R-01 provides functional integration, but users must still validate startup, PLL lock, jitter, and source-specific timing behavior from the manufacturer datasheet.

⚡

ASIC and Memory Clock Tree

The ICS552R-01 is suitable for an ASIC, FPGA, or memory subsystem that needs a multiplied clock distributed to several loads. By accepting a clock or fundamental parallel-mode crystal, it separates source selection from output distribution and can supply eight CMOS copies with low skew. The 3 V to 5.5 V supply range supports mixed 3.3 V and 5 V digital designs, subject to each load’s input thresholds. Layout should minimize output-trace length, provide local supply decoupling according to the family recommendations, and keep the clock network away from high-current switching paths. Its advantage is component consolidation; the trade-off is that a single shared clock device can become a common point of failure, making failure-mode analysis and source-quality evaluation important.

🌐

Communications Interface Clocking

The ICS552R-01 can supply multiple related clocks for communications controllers, serial links, and interface logic. Its PLL capability allows a lower-frequency reference to be multiplied, while the eight low-skew outputs distribute the result to several functional blocks. This arrangement is useful when the communications subsystem needs synchronized clocks but the board cannot accommodate a separate oscillator and multiple buffer stages. Keep each clock route short and maintain consistent return paths through the ground plane to control edge degradation. Engineers should establish source-jitter and loop-bandwidth requirements before selecting a multiplier ratio, then verify the complete output timing budget through simulation and hardware measurement. The device reduces circuit count, but it does not remove the need for careful signal-integrity validation.

🏭

Synchronous Digital Instrumentation

The ICS552R-01 can serve as the central clock multiplier and distributor in synchronous test, measurement, and industrial-control equipment. Eight outputs allow acquisition, processing, conversion, and communication sections to receive related clock signals from one reference. The maximum frequency of 200MHz supports demanding digital pipelines while the 20-SSOP package keeps the implementation compact. For instrumentation, separate sensitive analog sections from clock traces and use controlled return paths to prevent the eight outputs from coupling noise into sensitive nodes. Validate timing margins for the slowest and fastest specified system clocks, and qualify the selected ordering code for the instrument’s ambient-temperature range. Consolidation is valuable in multi-channel systems where board area and external clock-component count are constrained.

🧩

General-Purpose Digital Clock Tree

The ICS552R-01 is useful when a board requires one stable timing reference distributed across unrelated digital blocks. Its clock or crystal input options support both external oscillator and fundamental-crystal architectures, while the 1:8 output ratio gives designers flexible fan-out. The 3 V to 5.5 V operating range makes it practical for common embedded and communications platforms. Route outputs away from noisy power-converter stages, use the manufacturer’s recommended ground and decoupling arrangement, and avoid branching clocks without accounting for edge degradation. The integrated multiplier and buffer reduce external component count and simplify clock topology. Before release, test startup behavior, lock timing, output symmetry, and the temperature extremes of the installed system, because the exact suffix determines the applicable commercial or extended-temperature grade.

ملخص المنتجات الموصى بها

ICS552R-01T Same-family 20-SSOP clock generator and buffer يُستخدم في: FPGA Clock Distribution, ASIC and Memory Clock Tree, Synchronous Digital Instrumentation ICS552R-01IT Same-family 20-SSOP ordering variant يُستخدم في: FPGA Clock Distribution, ASIC and Memory Clock Tree, Synchronous Digital Instrumentation ICS552R-01CIT Same-family 20-SSOP ordering variant يُستخدم في: Processor Clock Fan-Out, Communications Interface Clocking, General-Purpose Digital Clock Tree ICS552R-01C Same-family 20-SSOP ordering variant يُستخدم في: Processor Clock Fan-Out, Communications Interface Clocking, General-Purpose Digital Clock Tree
What is the ICS552R-01?
The ICS552R-01 is a Renesas Electronics clock generator, multiplier, and buffer that produces eight low-skew CMOS outputs from a clock or fundamental parallel-mode crystal input. According to the Renesas 552-01 datasheet, it supports a maximum frequency of 200MHz and a 1:8 input-to-output ratio. The device combines clock multiplication and eight-way fan-out in one 20-SSOP package, making it useful for synchronous systems that need several related clock outputs.
Where can I download the ICS552R-01 datasheet PDF?
The ICS552R-01 datasheet PDF can be obtained from the official Renesas 552-01 datasheet page at https://www.renesas.com/en/document/dst/552-01-datasheet. The document covers the ICS552-01 family, including clock inputs, crystal operation, PLL multiplication, output behavior, electrical characteristics, and package information. Use the family datasheet together with the ordering-information section to confirm the electrical grade and package associated with the exact ICS552R-01 ordering code.
Where can I find the ICS552R-01 pinout?
The ICS552R-01 pinout is found in the pin-description table and package drawing in the Renesas 552-01 datasheet. The device uses a 20-SSOP package, and its outputs are associated with clock-generation, crystal-control, power, and ground functions. Assign PCB nets from the manufacturer pin table rather than inferring connections from an image alone, because the ordering suffix can identify a different temperature grade while retaining the same mechanical package.
What are the key specifications of ICS552R-01 that engineers should know?
The principal ICS552R-01 specifications are eight CMOS outputs, a maximum frequency of 200MHz, a 1:8 input-to-output ratio, PLL capability, and a 3 V to 5.5 V supply range. The device is housed in a 20-SSOP surface-mount package and accepts either a clock or crystal input. The identified commercial variants operate from 0°C to 70°C. These specifications position it as a multi-output clock multiplier and buffer for synchronous digital equipment.
How many outputs does the ICS552R-01 provide?
The ICS552R-01 provides eight low-skew CMOS outputs. According to the Renesas 552-01 datasheet, these outputs are copies of a multiple of the input clock or the fundamental parallel-mode crystal frequency. This eight-output arrangement can replace several separate clock-driver stages when multiple FPGA, ASIC, processor, memory, or communication blocks need related clock signals.
What is the maximum operating frequency of ICS552R-01?
The maximum operating frequency of the ICS552R-01 is 200MHz. The Renesas 552-01 datasheet identifies the device as a clock generator, multiplier, and buffer with eight outputs, while the indexed specifications list 200MHz as the maximum frequency. Actual usable frequency also depends on the selected multiplier ratio, source-clock quality, output loading, PCB signal integrity, and the individual ordering-code grade.
What supply voltage does ICS552R-01 require?
The ICS552R-01 operates from a 3 V to 5.5 V supply, according to the manufacturer-family specifications listed for the 20-SSOP device. This range supports 3.3 V and 5 V system environments. Designers should still use the exact ordering code’s electrical-characteristics table for operating conditions and timing limits, and should verify that every clock-domain load uses a supply voltage compatible with its CMOS input thresholds.
Is ICS552R-01 the same as ICS552-01?
The ICS552R-01 belongs to the ICS552-01 clock-generator family and shares its eight-output, multiplier-and-buffer architecture, but the complete suffix identifies the manufacturer’s ordering configuration. The family datasheet describes ICS552-01, while the available ICS552R-01T, ICS552R-01IT, ICS552R-01CIT, and ICS552R-01C ordering codes identify variations such as package and temperature grade. Confirm the full suffix and temperature range before treating any two codes as interchangeable.
What can replace the ICS552R-01?
The closest documented replacements for the ICS552R-01 are its same-package ICS552R-01 ordering-code variants, including ICS552R-01T, ICS552R-01IT, ICS552R-01CIT, and ICS552R-01C. Their electrical suitability depends on temperature grade and ordering suffix rather than a change in the basic eight-output architecture. No cross-manufacturer drop-in replacement was established, so an engineer changing suppliers should perform a new pin, timing, jitter, load, and qualification review.
ICS552R-01 vs ICS552R-01CIT: which version is appropriate?
The ICS552R-01CIT is the identified commercial-temperature 0°C to 70°C variant in a 20-SSOP package, while the broader ICS552R-01 ordering code requires verification of its exact suffix. Both use the same ICS552-01 family clock-generator architecture. Choose ICS552R-01CIT when its 0°C to 70°C range matches the product environment and confirm remaining electrical, marking, and qualification requirements before substitution.
When should I choose ICS552R-01 over a basic clock buffer?
Choose the ICS552R-01 when the design must both multiply or derive a clock and distribute it through eight low-skew CMOS outputs. A basic clock buffer is preferable when the source already has the required frequency and only needs simpler fan-out. The ICS552R-01 is more appropriate for FPGA or ASIC clock trees, processor clock distribution, and systems needing multiple synchronized outputs from one clock or fundamental crystal reference.
Is ICS552R-01 suitable for an FPGA clock tree?
Yes, the ICS552R-01 is suitable for an FPGA clock tree that requires one source clock to feed several related destinations. Its eight low-skew outputs, 200MHz maximum frequency, and 1:8 distribution ratio can reduce the number of separate distribution buffers. Validate the FPGA input threshold, target clock topology, maximum input frequency, jitter budget, and board-level fan-out rules before committing to the device.
How do I choose between ICS552R-01T and ICS552R-01IT?
The ICS552R-01T and ICS552R-01IT both belong to the ICS552R-01 20-SSOP family, but their complete ordering codes may denote different temperature grades or customer-specific configurations. Select based on the exact manufacturer ordering table and required ambient-temperature range, then review package markings and qualification status. The available technical description does not establish every suffix-level difference, so do not infer interchangeability from the shared family name alone.
Where can I buy ICS552R-01 and what is its price?
Use the Request a Quote form on this page to inquire about the exact ICS552R-01, current commercial availability, and price. Because ICS552R-01 is a legacy ordering code, confirm the full suffix, temperature grade, package, quantity, and production status with the supplier. The Request a Quote form can also establish current lead time and any minimum-order or handling constraints.
What is the lead time for ICS552R-01?
Current lead time for ICS552R-01 depends on the exact ordering suffix, inventory position, and whether the required part remains orderable. Submit the complete MPN through the Request a Quote form and request a lead-time confirmation for the intended quantity. If the standard suffix is no longer readily available, also ask whether an equivalent 20-SSOP family ordering code can be used after engineering review.
Is ICS552R-01 currently in stock?
ICS552R-01 stock status must be confirmed for the exact ordering code and requested quantity through the Request a Quote form on this page. The existence of a product page or catalog reference does not establish current inventory, particularly for a legacy clock-generation IC. Include the desired package form, commercial or industrial temperature requirement, and annual usage in the request so the supplier can identify the closest available configuration.
What is the best cross-brand equivalent for ICS552R-01?
No cross-brand drop-in equivalent for the ICS552R-01 was established by the available cross-reference results. The documented alternatives are same-family Renesas ordering codes, and a new-manufacturer clock generator may differ in pin assignment, PLL architecture, output count, jitter, skew, input frequency range, and supply requirements. Treat any cross-brand candidate as a redesign candidate until its datasheet and timing characteristics have been compared line by line.

بيانات مرجعية هندسية لـ ICS552R-01 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the ICS552R-01 when one clock or fundamental crystal reference must be multiplied and distributed through as many as eight low-skew CMOS outputs. It is particularly suitable for FPGA, ASIC, processor, memory, and communications clock trees operating up to 200MHz. The documented ICS552R-01T and ICS552R-01IT ordering codes are the closest same-family choices when the exact suffix must be changed, while ICS552R-01CIT and ICS552R-01C are identified with a 0°C to 70°C commercial range. Select a suffix only after checking its exact temperature grade, marking, and electrical limits. No verified cross-manufacturer drop-in replacement was found, so a competitor device should be treated as a redesign until its pinout, PLL behavior, output timing, jitter, skew, drive, and qualification data have been verified. For new designs, confirm product availability before committing the clock architecture.

المقارنة مع البدائل

المعامل هذا المنتج ICS552R-01T ICS552R-01IT ICS552R-01CIT ICS552R-01C
Package 20-SSOP 20-SSOP 20-SSOP 20-SSOP 20-SSOP
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Number of Outputs 8 8 8 8 8
Input-to-Output Ratio 1:8 1:8 1:8 1:8 1:8
Output Type CMOS CMOS CMOS CMOS CMOS
Input Type Clock or crystal Clock or crystal Clock or crystal Clock or crystal Clock or crystal
PLL Yes Yes Yes Yes Yes

أبرز الفروقات

  • Eight-output clock multiplication and buffering in one device (مقابلICS552R-01T)
  • Maximum operating frequency of 200MHz (مقابلICS552R-01CIT)
  • 3 V to 5.5 V operating range supports common digital rails (مقابلICS552R-01IT)

ملاحظات التصميم

Treat the eight outputs as high-speed clock nets. Route them over a continuous ground plane, minimize stubs and unnecessary vias, and keep traces short enough to preserve edge quality at the 200MHz device limit. If a receiver requires source termination, calculate it from the actual trace impedance rather than applying a resistor by rule of thumb. Confirm output drive and load limits in the manufacturer electrical-characteristics table before adding branch points.

Use the manufacturer pin-description table to assign the 20-SSOP netlist and confirm pin 1 orientation against the package drawing. Place the device near the clock source or crystal network and keep supply and ground connections short. The available technical description does not provide a complete external-component network, so follow the family application circuit for crystal load capacitors, bypass capacitors, and termination values rather than estimating those values from the output frequency alone.

Do not assume that every ICS552R-01 suffix is electrically interchangeable solely because the package is identical. Confirm the ordering table for temperature grade, marking, and any suffix-specific configuration. Also do not assume the indexed 27 MHz value describes the maximum output capability of every ordering code; use the exact datasheet limit for the selected part. Validate PLL lock, startup, jitter, and output timing in the final reference design.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code. The component is a legacy clock and timing IC and is not presented as an AEC-Q100 automotive-qualified device.

تم التحقق من البيانات في: 2026-11-16 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ICS552R-01 datasheet ICS552R-01 pinout ICS552R-01 datasheet pdf ICS552R-01 specifications ICS552R-01 200MHz ICS552R-01 8 outputs ICS552R-01 20-SSOP ICS552R-01 equivalent ICS552R-01 replacement ICS552R-01 cross reference ICS552R-01 price ICS552R-01 stock Renesas ICS552R-01 ICS552R-01 FPGA clock tree ICS552R-01 vs ICS552R-01CIT

المكونات والمصطلحات ذات الصلة

Renesas Electronics ICS552R-01 ICS552-01 ICS552R-01T ICS552R-01IT ICS552R-01CIT ICS552R-01C clock generator clock multiplier clock buffer clock and timing IC integrated circuit semiconductor PLL CMOS low-skew clock fundamental parallel-mode crystal 20-SSOP surface mount SMD 200MHz 1:8 clock distribution FPGA clock tree ASIC clock distribution 3 V to 5.5 V
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر