Renesas Electronics

ICS650G-36 25MHz PCI Clock Generator | Renesas

MPN: ICS650G-36 ✗ انتهى عمره الإنتاجي
16-pin TSSOP Package 25 MHz Speed
الحد الأدنى للطلب: 1 |

ICS650G-36 نظرة عامة

Renesas Electronics ICS650G-36 is a low-cost PCI and networking clock generator with one 25 MHz crystal input and four CMOS clock outputs. It uses analog/digital phase-locked-loop techniques to support LAN, PCI, and 100M SDRAM clock requirements. The device supports PLL bypass operation and is packaged in a 16-pin TSSOP.

A clock generator is a timing IC that creates one or more deterministic clock signals for digital systems. Clock and timing ICs sit within the broader semiconductor hierarchy and distribute reference frequencies to processors, memory, network controllers, and bus interfaces. The ICS650G-36 accepts either a crystal or clock input, locks the internal PLL to that reference, and supplies four related output clocks. This arrangement allows one reference source to support several legacy computing and networking clock domains.

Key features include a maximum frequency of 25 MHz, one clock circuit, a 1:4 input-to-output ratio, CMOS outputs, and PLL operation with bypass capability. The PLL multiplier allows a 25 MHz fundamental-mode crystal reference to produce four output clocks. Bypass functionality is useful during startup, test, or configurations where direct reference-clock distribution is preferable. The 16-pin TSSOP package supports conventional surface-mount PCB assembly.

Internally, the ICS650G-36 combines analog and digital phase-locked-loop techniques with a standard fundamental-mode crystal input. Its architecture is intended to provide multiple clocks from one inexpensive reference while supporting the clocking requirements associated with LAN, PCI, and 100M SDRAM systems. Exact acquisition behavior, output-frequency configuration, voltage limits, and jitter characteristics should be confirmed in the manufacturer datasheet before layout release.

Typical applications include legacy PCI peripheral boards, networking equipment, 100M SDRAM memory interfaces, Ethernet controllers, and embedded systems requiring multiple synchronized clock outputs. The four-output arrangement reduces the number of separate oscillators and clock distribution components required on a board. It is particularly relevant to designs based on older PCI and 100M SDRAM architectures rather than modern high-speed server clocking requirements.

For implementation, follow the reference circuit and pin-connection details in the manufacturer datasheet, especially for the crystal or external-clock input and unused outputs. Confirm the bypass configuration and output routing for each target bus. PCB signal-integrity practices should include short clock traces, continuous reference planes, and deliberate return paths; CMOS clock outputs also require suitable termination for the selected trace impedance.

This product page combines the manufacturer’s application description with verified device attributes, ordering-variant references, a parameter comparison, and practical implementation guidance. It also identifies where additional electrical, environmental, lifecycle, and pin-level information must be checked before production release.

بدائل مباشرة لـ ICS650G-36 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

ICS650G-36LF

✅ بديل مباشر
📦 16-pin TSSOP
Same 25 MHz, four-output, 1:4 PLL clock function; ordering suffix differs and the exact temperature grade must be checked

📋 بديل مرجعي (غير موجود في الكتالوج)

ICS650GI-36LF

✅ بديل مباشر
📦 16-pin TSSOP
Same 25 MHz, four-output, 1:4 PLL clock function and 16-pin TSSOP footprint; ordering-code and grade differences require datasheet confirmation

📋 بديل مرجعي (غير موجود في الكتالوج)

ICS650G-36T

✅ بديل مباشر
📦 16-pin TSSOP
Same documented 25 MHz, four-output, 1:4 PLL function; the T ordering code differs and temperature or packing details must be confirmed

📋 بديل مرجعي (غير موجود في الكتالوج)

ICS650G-36 المواصفات

Product Type Clock/Frequency Synthesizer
الوظيفة Networking and PCI clock source
Maximum Frequency 25 MHz
Reference Input 25 MHz fundamental-mode crystal
Number of Circuits 1
عدد المخارج 4
Input-to-Output Ratio 1:4
PLL Yes, with bypass
نوع الخرج CMOS
العلبة 16-pin TSSOP
Package Width 4.40 mm
نوع التركيب Surface Mount
حالة RoHS unknown
REACH Status unknown
Lead-Free Status unknown

دليل تكوين أطراف ICS650G-36 4.40 mm

تكوين الأطراف لـ ICS650G-36 (حزمة 4.40 mm). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 4.40 mm لـ ICS650G-36

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ICS650G-36.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ICS650G-36 مناسب لـ 6 التطبيقs: Legacy PCI Interface Clocking, LAN Network Interface Timing, 100M SDRAM Memory Clocking, Ethernet Controller Support, Legacy Embedded System Timing, Industrial Control Board Clock Distribution.

🖥️

Legacy PCI Interface Clocking

The ICS650G-36 fits legacy PCI interface designs that can use a 25 MHz reference and require four related CMOS clock outputs. Its documented 1:4 input-to-output ratio and PLL bypass capability support centralized clock distribution without requiring four separate oscillators. The 16-pin TSSOP package also preserves the compact surface-mount implementation commonly associated with older PCI peripheral and controller boards. Designers should use the manufacturer reference circuit to confirm crystal loading, bypass logic, and the clock assigned to each PCI domain, then verify output timing against the host and peripheral requirements.

🌐

LAN Network Interface Timing

The ICS650G-36 is appropriate for legacy LAN equipment that needs several clock outputs derived from one 25 MHz fundamental-mode reference. The Renesas Electronics manufacturer datasheet identifies LAN support as a primary application and specifies four outputs from one PLL clock circuit. This arrangement is useful when a network controller, memory interface, or supporting logic requires related clock signals. Confirm output routing and bypass behavior in the device documentation, and route each CMOS clock over a controlled-impedance trace with an appropriate ground reference to reduce edge-related noise.

🖥️

100M SDRAM Memory Clocking

The ICS650G-36 can support a 100M SDRAM design requiring a 25 MHz crystal reference and multiple related clock outputs. Its four-output architecture reduces oscillator count while maintaining a common reference relationship across supported clock domains. The single PLL circuit, CMOS outputs, and bypass mode are the principal features to evaluate when preserving a legacy memory interface. Before schematic release, compare every output frequency, edge relationship, voltage level, and bypass state with the memory-controller requirements and follow the manufacturer’s recommended decoupling and trace-routing guidance.

🌐

Ethernet Controller Support

The ICS650G-36 is suitable for an older Ethernet controller platform that needs a shared, crystal-referenced clock source rather than a high-speed programmable serializer. Its 25 MHz input capability, four CMOS outputs, and PLL bypass support clock distribution to controller, status, and memory-related logic. The device should be selected only where the controller timing aligns with the documented 1:4 clock relationship. Use the reference design to select suitable output configurations and maintain short, properly referenced clock paths so that reflections and crosstalk do not degrade timing margin.

🔧

Legacy Embedded System Timing

The ICS650G-36 can centralize timing in a legacy embedded system that requires one 25 MHz reference and four CMOS clock outputs. It is useful when the board already implements a PCI, LAN, or 100M SDRAM subsystem and needs a compact clock source without a complex programmable-clock device. The PLL bypass path also supports controlled startup and test sequences. Validate startup behavior, output state during configuration, and supply sequencing against the surrounding logic because those details determine whether a replacement board may use the same footprint and component arrangement.

🏭

Industrial Control Board Clock Distribution

The ICS650G-36 may be used in an industrial control board that retains legacy PCI or networking logic and needs several related clock outputs from a single reference. Its compact TSSOP construction and four-output PLL arrangement simplify distribution across controller, communications, and memory sections. Because the device is associated with legacy clock requirements, qualification conditions and lifecycle status should be reviewed for each production program. Confirm operating-temperature limits, supply tolerance, clock accuracy, and output stability against the Renesas Electronics manufacturer datasheet before treating it as a new industrial design choice.

ملخص المنتجات الموصى بها

ICS650G-36LF Lead-free ordering variant of the same clock generator يُستخدم في: Legacy PCI Interface Clocking, LAN Network Interface Timing, 100M SDRAM Memory Clocking, Ethernet Controller Support, Industrial Control Board Clock Distribution ICS650GI-36LF Related 16-pin TSSOP clock-generator variant يُستخدم في: Legacy PCI Interface Clocking, 100M SDRAM Memory Clocking, Legacy Embedded System Timing ICS650G-36T Related clock-generator ordering variant يُستخدم في: LAN Network Interface Timing, Legacy Embedded System Timing, Industrial Control Board Clock Distribution ICS650G-40A Related 16-pin TSSOP Ethernet clock family member with different timing configuration يُستخدم في: Ethernet Controller Support
What is the Renesas ICS650G-36 clock generator?
The Renesas ICS650G-36 is a low-cost clock and frequency synthesizer designed for networking and PCI applications. According to the Renesas Electronics manufacturer datasheet, it accepts a 25 MHz fundamental-mode crystal reference and uses analog/digital phase-locked-loop techniques to produce four output clocks for LAN, PCI, and 100M SDRAM functions. The device is packaged in a 16-pin TSSOP.
What is the maximum clock frequency of the ICS650G-36?
The ICS650G-36 has a maximum stated frequency of 25 MHz. According to the Renesas Electronics manufacturer datasheet, the standard reference arrangement uses a 25 MHz fundamental-mode crystal, and the PLL produces four clock outputs with a 1:4 input-to-output ratio. The device is therefore intended primarily as a multi-output source for legacy PCI, networking, and 100M SDRAM clock domains.
How many clock outputs does the ICS650G-36 provide?
The ICS650G-36 provides four clock outputs from one clock circuit. The Renesas Electronics manufacturer datasheet identifies the architecture as a 25 MHz crystal-referenced PLL frequency generator intended to support LAN, PCI, and 100M SDRAM functions. Each output is CMOS, and the stated input-to-output relationship is 1:4, allowing one reference source to feed several clock requirements on the same board.
Does the ICS650G-36 include PLL bypass operation?
Yes, the ICS650G-36 includes PLL bypass operation. According to the Renesas Electronics manufacturer datasheet, the device uses analog/digital phase-locked-loop techniques for normal clock generation, while bypass permits direct use of the reference input during suitable operating conditions. Use the datasheet configuration table to confirm the required logic states and output behavior for each mode.
Where can I download the ICS650G-36 datasheet PDF?
The official ICS650G-36 datasheet is available through the Renesas Electronics document page at https://www.renesas.com/en/document/dst/650-36-datasheet. The manufacturer page describes the ICS650-36 as a low-cost networking and PCI frequency generator using a 25 MHz crystal input to generate four outputs. Use that document for the authoritative pin description, recommended application circuit, electrical limits, and package drawing.
Where is the pinout for the ICS650G-36 TSSOP package?
The ICS650G-36 pinout is identified in the pin-description table of the Renesas Electronics manufacturer datasheet. The component uses a 16-pin TSSOP package, but individual pin names are not reproduced on this product page. Assign PCB nets directly from the manufacturer pin table and preserve the package orientation shown in the recommended land pattern before releasing artwork.
Where can I buy ICS650G-36 components?
Use the Request a Quote form on this page to request ICS650G-36 availability, current lead time, and ordering details. The quote workflow is the appropriate route for this legacy clock generator because market status can vary by exact ordering suffix and package format. Provide the intended ICS650G-36 variant, target quantity, and date-code requirements when submitting the request.
What is the current price of the ICS650G-36?
The current ICS650G-36 price is established through the Request a Quote form on this page rather than a static table. Quote handling is appropriate for an older clock generator whose availability and exact ordering suffix can affect commercial terms. Submit the required MPN, quantity, and delivery target for a current response without relying on an outdated historical unit price.
What is the lead time and stock status for the ICS650G-36?
Current stock, minimum order quantity, and lead time for the ICS650G-36 should be requested through the Request a Quote form on this page. Because availability can differ between the base MPN, LF ordering code, and other documented variants, identify the exact mounted form and required quantity. The manufacturer lists the device in a datasheet associated with legacy networking and PCI clocking.
Is the ICS650G-36 suitable for networking and PCI systems?
The ICS650G-36 is specifically suitable for legacy networking and PCI clock-generation requirements. According to the Renesas Electronics manufacturer datasheet, its four outputs support LAN, PCI, and 100M SDRAM functions from a 25 MHz crystal reference. It is a better fit for systems using these established clock domains than for modern designs requiring substantially higher frequency, lower jitter, or more configurable outputs.
When should I choose the ICS650G-36 over a modern clock generator?
Choose the ICS650G-36 when maintaining a legacy design that already uses its 16-pin TSSOP footprint, 25 MHz reference arrangement, four CMOS outputs, and 1:4 PLL relationship. Select a modern clock generator instead when the design requires programmable frequencies, lower jitter, additional outputs, wider supply options, or qualification for current industrial and automotive programs. PCB compatibility alone does not guarantee equivalent timing performance.
What is the best drop-in replacement for the ICS650G-36?
The closest documented drop-in options are the ICS650G-36LF and ICS650GI-36LF ordering variants, subject to confirmation of the exact package and pin configuration. No cross-manufacturer substitute can be identified as pin-compatible from the available technical information. Before replacing the device, compare supply voltage, clock-output behavior, bypass logic, crystal load requirements, and the manufacturer’s complete pin table.
Can the ICS650GI-36LF replace the ICS650G-36?
The ICS650GI-36LF is a closely related Renesas 16-pin TSSOP ordering variant and is the most practical candidate for evaluation as a replacement. Its suitability depends on matching the original device’s supply requirements, crystal connection, output functions, PLL bypass behavior, and package dimensions. Treat it as a drop-in candidate only after checking every assigned pin against the manufacturer datasheet.
ICS650G-36 vs ICS650G-40A: which clock generator fits a PCI or SDRAM design?
The ICS650G-36 is the better match for a legacy PCI or 100M SDRAM design requiring the documented 25 MHz, four-output clock arrangement. The ICS650G-40A is described as an Ethernet-switch clock in a 16-pin TSSOP, so its frequency plan and pin functions may differ despite the similar package. The ICS650G-40A should not be treated as a drop-in replacement unless the complete pinout and timing specifications prove equivalence.
What are the key specifications of the ICS650G-36 that engineers should know?
The ICS650G-36 is a 25 MHz maximum-frequency CMOS clock and frequency synthesizer with one PLL circuit, PLL bypass, four outputs, and a 1:4 input-to-output ratio. According to the Renesas Electronics manufacturer datasheet, it uses a 25 MHz fundamental-mode crystal to support LAN, PCI, and 100M SDRAM functions. Its 16-pin TSSOP package supports surface-mount assembly and legacy clock-distribution designs.
Is the ICS650G-36 still active for new designs?
The ICS650G-36 should be treated as a legacy or obsolete product for new-design planning. The official Renesas Electronics document remains accessible, but the product is associated with older PCI, LAN, and 100M SDRAM architectures. For production continuity, confirm exact suffix availability and lifecycle status through the Request a Quote form, and consider a modern programmable clock generator for new platforms.

بيانات مرجعية هندسية لـ ICS650G-36 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the ICS650G-36 when maintaining a legacy PCI, LAN, or 100M SDRAM platform that requires a 25 MHz crystal reference, four CMOS outputs, a 1:4 input-to-output relationship, and PLL bypass in a 16-pin TSSOP footprint. The documented ordering variants may simplify sourcing or grade matching, but verify their exact electrical ratings and pin functions before substitution. Do not choose the ICS650G-40A solely because it also uses a 16-pin TSSOP; its Ethernet-switch timing configuration differs. For a new design, select a current programmable clock generator instead if you need adjustable frequencies, lower jitter, more outputs, current temperature options, or an active lifecycle commitment. The ICS650G-36 is most appropriate as a targeted legacy-support choice rather than a general-purpose modern clock solution.

المقارنة مع البدائل

المعامل هذا المنتج ICS650G-36LF ICS650GI-36LF ICS650G-36T
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP
Product Type Clock/Frequency Synthesizer Clock/Frequency Synthesizer Clock/Frequency Synthesizer Clock/Frequency Synthesizer
Maximum Frequency 25 MHz 25 MHz 25 MHz 25 MHz
Number of Circuits 1 1 1 1
Number of Outputs 4 4 4 4
Input-to-Output Ratio 1:4 1:4 1:4 1:4
PLL Yes, with bypass Yes, with bypass Yes, with bypass Yes, with bypass
Output Type CMOS CMOS CMOS CMOS
Primary Applications LAN, PCI, and 100M SDRAM LAN, PCI, and 100M SDRAM LAN, PCI, and 100M SDRAM LAN, PCI, and 100M SDRAM

أبرز الفروقات

  • Four related outputs from one clock circuit (مقابلICS650G-40A)
  • Integrated PLL bypass (مقابلICS650G-36LF)
  • Purpose-built legacy PCI and networking clocking (مقابلICS650GI-36LF)

ملاحظات التصميم

Keep the 25 MHz crystal path and PLL output routes short and compact, following the manufacturer reference layout. Place associated passive components close to their assigned pins and maintain a continuous ground reference beneath clock traces. Avoid routing clock nets beneath noisy switching-converter nodes or isolated digital regions. For edge-sensitive CMOS outputs, use source-end termination or another termination method validated against the actual trace impedance.

Treat the four outputs as related but distinct clock signals and verify that each destination receives the intended frequency and phase relationship. Check output enable or bypass states during reset because an unexpected clock state can create contention or invalid timing at downstream logic. Model the complete trace, load, and termination network before release. Preserve the reference and output ground paths because return-path discontinuities can degrade edge quality even when the apparent clock frequency is correct.

Do not assume that an ordering-code change is electrically neutral. Before substituting any listed variant, compare supply voltage, temperature grade, crystal load, PLL bypass logic, output enable behavior, and every assigned pin in the manufacturer datasheet. The 16-pin TSSOP footprint alone does not establish functional drop-in compatibility. For new designs, evaluate a modern programmable clock generator when multiple unrelated output frequencies, lower jitter, or current lifecycle support are required.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The available technical information identifies a legacy clock generator but does not establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The LF ordering code should not be interpreted as proof of lead-free compliance without manufacturer documentation.

تم التحقق من البيانات في: 2026-11-16 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ICS650G-36 datasheet ICS650G-36 pinout ICS650G-36 datasheet pdf ICS650G-36 equivalent ICS650G-36 replacement ICS650G-36 drop-in replacement ICS650G-36 vs ICS650G-40A ICS650G-36 price ICS650G-36 stock Renesas ICS650G-36 ICS650G-36 TSSOP package ICS650G-36 PCI clock ICS650G-36 networking clock generator ICS650G-36 25 MHz CMOS output ICS650G-36 application circuit

المكونات والمصطلحات ذات الصلة

Renesas Electronics ICS650G-36 ICS650G-36LF ICS650GI-36LF ICS650G-36T ICS650G-40A clock generator frequency synthesizer phase-locked loop PLL CMOS output 25 MHz crystal 1:4 input-to-output ratio 16-pin TSSOP TSSOP package family surface-mount package PCI clock LAN timing 100M SDRAM clock bypass networking interface legacy computer architecture
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر