ICS650G-36 25MHz PCI Clock Generator | Renesas
MPN: ICS650G-36 ✗ Tapus ng BuhayICS650G-36 Ulas
A clock generator is a timing IC that creates one or more deterministic clock signals for digital systems. Clock and timing ICs sit within the broader semiconductor hierarchy and distribute reference frequencies to processors, memory, network controllers, and bus interfaces. The ICS650G-36 accepts either a crystal or clock input, locks the internal PLL to that reference, and supplies four related output clocks. This arrangement allows one reference source to support several legacy computing and networking clock domains.
Key features include a maximum frequency of 25 MHz, one clock circuit, a 1:4 input-to-output ratio, CMOS outputs, and PLL operation with bypass capability. The PLL multiplier allows a 25 MHz fundamental-mode crystal reference to produce four output clocks. Bypass functionality is useful during startup, test, or configurations where direct reference-clock distribution is preferable. The 16-pin TSSOP package supports conventional surface-mount PCB assembly.
Internally, the ICS650G-36 combines analog and digital phase-locked-loop techniques with a standard fundamental-mode crystal input. Its architecture is intended to provide multiple clocks from one inexpensive reference while supporting the clocking requirements associated with LAN, PCI, and 100M SDRAM systems. Exact acquisition behavior, output-frequency configuration, voltage limits, and jitter characteristics should be confirmed in the manufacturer datasheet before layout release.
Typical applications include legacy PCI peripheral boards, networking equipment, 100M SDRAM memory interfaces, Ethernet controllers, and embedded systems requiring multiple synchronized clock outputs. The four-output arrangement reduces the number of separate oscillators and clock distribution components required on a board. It is particularly relevant to designs based on older PCI and 100M SDRAM architectures rather than modern high-speed server clocking requirements.
For implementation, follow the reference circuit and pin-connection details in the manufacturer datasheet, especially for the crystal or external-clock input and unused outputs. Confirm the bypass configuration and output routing for each target bus. PCB signal-integrity practices should include short clock traces, continuous reference planes, and deliberate return paths; CMOS clock outputs also require suitable termination for the selected trace impedance.
This product page combines the manufacturer’s application description with verified device attributes, ordering-variant references, a parameter comparison, and practical implementation guidance. It also identifies where additional electrical, environmental, lifecycle, and pin-level information must be checked before production release.
Mga alternatibo na pwedeng ilagay na ICS650G-36 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
ICS650G-36LF
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ICS650GI-36LF
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ICS650G-36T
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ICS650G-36 Mga Spesipikasyon
| Product Type | Clock/Frequency Synthesizer |
| Fungsi | Networking and PCI clock source |
| Maximum Frequency | 25 MHz |
| Reference Input | 25 MHz fundamental-mode crystal |
| Number of Circuits | 1 |
| Bilang ng Outputs | 4 |
| Input-to-Output Ratio | 1:4 |
| PLL | Yes, with bypass |
| Type ng Output | CMOS |
| Packhaging | 16-pin TSSOP |
| Package Width | 4.40 mm |
| Uri ng Pagpapasok | Surface Mount |
| Tindminan RoHS | unknown |
| REACH Status | unknown |
| Lead-Free Status | unknown |
Gabay sa Pin Configuration ng ICS650G-36 4.40 mm
Pin configuration para sa ICS650G-36 (4.40 mm package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa ICS650G-36.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ICS650G-36 ay nararapat para sa 6 aplikasyons: Legacy PCI Interface Clocking, LAN Network Interface Timing, 100M SDRAM Memory Clocking, Ethernet Controller Support, Legacy Embedded System Timing, Industrial Control Board Clock Distribution.
Legacy PCI Interface Clocking
The ICS650G-36 fits legacy PCI interface designs that can use a 25 MHz reference and require four related CMOS clock outputs. Its documented 1:4 input-to-output ratio and PLL bypass capability support centralized clock distribution without requiring four separate oscillators. The 16-pin TSSOP package also preserves the compact surface-mount implementation commonly associated with older PCI peripheral and controller boards. Designers should use the manufacturer reference circuit to confirm crystal loading, bypass logic, and the clock assigned to each PCI domain, then verify output timing against the host and peripheral requirements.
Inirekomenda
LAN Network Interface Timing
The ICS650G-36 is appropriate for legacy LAN equipment that needs several clock outputs derived from one 25 MHz fundamental-mode reference. The Renesas Electronics manufacturer datasheet identifies LAN support as a primary application and specifies four outputs from one PLL clock circuit. This arrangement is useful when a network controller, memory interface, or supporting logic requires related clock signals. Confirm output routing and bypass behavior in the device documentation, and route each CMOS clock over a controlled-impedance trace with an appropriate ground reference to reduce edge-related noise.
Inirekomenda
100M SDRAM Memory Clocking
The ICS650G-36 can support a 100M SDRAM design requiring a 25 MHz crystal reference and multiple related clock outputs. Its four-output architecture reduces oscillator count while maintaining a common reference relationship across supported clock domains. The single PLL circuit, CMOS outputs, and bypass mode are the principal features to evaluate when preserving a legacy memory interface. Before schematic release, compare every output frequency, edge relationship, voltage level, and bypass state with the memory-controller requirements and follow the manufacturer’s recommended decoupling and trace-routing guidance.
Inirekomenda
Ethernet Controller Support
The ICS650G-36 is suitable for an older Ethernet controller platform that needs a shared, crystal-referenced clock source rather than a high-speed programmable serializer. Its 25 MHz input capability, four CMOS outputs, and PLL bypass support clock distribution to controller, status, and memory-related logic. The device should be selected only where the controller timing aligns with the documented 1:4 clock relationship. Use the reference design to select suitable output configurations and maintain short, properly referenced clock paths so that reflections and crosstalk do not degrade timing margin.
Inirekomenda
Legacy Embedded System Timing
The ICS650G-36 can centralize timing in a legacy embedded system that requires one 25 MHz reference and four CMOS clock outputs. It is useful when the board already implements a PCI, LAN, or 100M SDRAM subsystem and needs a compact clock source without a complex programmable-clock device. The PLL bypass path also supports controlled startup and test sequences. Validate startup behavior, output state during configuration, and supply sequencing against the surrounding logic because those details determine whether a replacement board may use the same footprint and component arrangement.
Inirekomenda
Industrial Control Board Clock Distribution
The ICS650G-36 may be used in an industrial control board that retains legacy PCI or networking logic and needs several related clock outputs from a single reference. Its compact TSSOP construction and four-output PLL arrangement simplify distribution across controller, communications, and memory sections. Because the device is associated with legacy clock requirements, qualification conditions and lifecycle status should be reviewed for each production program. Confirm operating-temperature limits, supply tolerance, clock accuracy, and output stability against the Renesas Electronics manufacturer datasheet before treating it as a new industrial design choice.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for ICS650G-36 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | ICS650G-36LF | ICS650GI-36LF | ICS650G-36T |
|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP |
| Product Type | Clock/Frequency Synthesizer | Clock/Frequency Synthesizer | Clock/Frequency Synthesizer | Clock/Frequency Synthesizer |
| Maximum Frequency | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
| Number of Circuits | 1 | 1 | 1 | 1 |
| Number of Outputs | 4 | 4 | 4 | 4 |
| Input-to-Output Ratio | 1:4 | 1:4 | 1:4 | 1:4 |
| PLL | Yes, with bypass | Yes, with bypass | Yes, with bypass | Yes, with bypass |
| Output Type | CMOS | CMOS | CMOS | CMOS |
| Primary Applications | LAN, PCI, and 100M SDRAM | LAN, PCI, and 100M SDRAM | LAN, PCI, and 100M SDRAM | LAN, PCI, and 100M SDRAM |
Pangunahing mga Pagkakaiba
- Four related outputs from one clock circuit (kumpara saICS650G-40A)
- Integrated PLL bypass (kumpara saICS650G-36LF)
- Purpose-built legacy PCI and networking clocking (kumpara saICS650GI-36LF)
Talaan ng Disenyo
Keep the 25 MHz crystal path and PLL output routes short and compact, following the manufacturer reference layout. Place associated passive components close to their assigned pins and maintain a continuous ground reference beneath clock traces. Avoid routing clock nets beneath noisy switching-converter nodes or isolated digital regions. For edge-sensitive CMOS outputs, use source-end termination or another termination method validated against the actual trace impedance.
Treat the four outputs as related but distinct clock signals and verify that each destination receives the intended frequency and phase relationship. Check output enable or bypass states during reset because an unexpected clock state can create contention or invalid timing at downstream logic. Model the complete trace, load, and termination network before release. Preserve the reference and output ground paths because return-path discontinuities can degrade edge quality even when the apparent clock frequency is correct.
Do not assume that an ordering-code change is electrically neutral. Before substituting any listed variant, compare supply voltage, temperature grade, crystal load, PLL bypass logic, output enable behavior, and every assigned pin in the manufacturer datasheet. The 16-pin TSSOP footprint alone does not establish functional drop-in compatibility. For new designs, evaluate a modern programmable clock generator when multiple unrelated output frequencies, lower jitter, or current lifecycle support are required.
Impormasyon ng Pagsunod sa Kautusan
The available technical information identifies a legacy clock generator but does not establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The LF ordering code should not be interpreted as proof of lead-free compliance without manufacturer documentation.