G

ICS650G-40 Ethernet Switch Clock Source | Integrated Circuit Systems

MPN: ICS650G-40 ✓ نشط
16-TSSOP, 0.173 inch (4.40 mm) width Package 25 MHz Speed
الحد الأدنى للطلب: 1 |

ICS650G-40 نظرة عامة

The Integrated Circuit Systems ICS650G-40 is a clock synthesizer and Ethernet switch clock source with a PLL, crystal or clock input, and clock output. It accepts a 25 MHz crystal input and generates selectable output clock frequencies for Ethernet switch designs. The device is associated with a 1:3 input-to-output ratio, one PLL circuit, and a maximum listed input frequency of 25 MHz.

A clock synthesizer is a type of frequency-generation IC used to derive stable timing signals from a common reference. Within the product hierarchy, the ICS650G-40 belongs to the clock and timing IC family, which sits within interface and network-clocking systems. Ethernet switches require multiple related clocks for transceiver interfaces, switching logic, packet processing, and system management. A programmable clock source allows one reference oscillator to support several clock domains while reducing the number of discrete timing components.

The principal feature of the ICS650G-40 is its phase-locked-loop architecture. The PLL can divide or multiply the input reference to produce the output frequencies selected through the device's output-select interface. Its 25 MHz reference input provides a common timing foundation for Ethernet switch clock trees. The 1:3 ratio associated with related ICS650G-40 variants provides a useful implementation option when the required system clock is three times the reference frequency.

This clock source is intended specifically for Ethernet switch applications rather than general-purpose timing distribution. Its integrated PLL can reduce the number of separate dividers and oscillators needed around a switching ASIC. The 16-TSSOP package identified for related ICS650G-40A variants also reflects a compact surface-mount format appropriate for communications equipment, although engineers should verify the exact land pattern and pin assignment for the ordering code being placed on the PCB.

Typical uses include core-clock generation for Ethernet switching silicon, clock-tree support in network interface cards, and timing generation in managed or unmanaged switching platforms. The device can be especially useful where several subsystems must operate from one 25 MHz crystal reference while requiring selectable output-clock options.

PCB design should preserve short, clean clock traces and provide a stable reference source with appropriate grounding. Keep sensitive oscillator and PLL traces away from high-current switching nodes, and use the manufacturer pin-description table to assign every signal correctly. Confirm output frequency, enable behavior, supply requirements, and load capability against the datasheet before releasing a production layout.

This product page combines the Ethernet clock-source function, PLL characteristics, package considerations, application guidance, and substitution constraints into an engineering-focused guide. It also distinguishes verified drop-in candidates from suffix-only ordering options that should not be assumed to be interchangeable without package and pin verification.

بدائل مباشرة لـ ICS650G-40 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

ICS650G-40A

✅ بديل مباشر
📦 16-TSSOP
Same documented 25 MHz PLL clock-source class and 1:3 ratio; ordering-grade details require verification

📋 بديل مرجعي (غير موجود في الكتالوج)

ICS650-40

✅ بديل مباشر
📦 16-TSSOP
Same documented 25 MHz PLL Ethernet clock-source function; exact package and pin assignments require verification

📋 بديل مرجعي (غير موجود في الكتالوج)

ICS650G-40ALF

✅ بديل مباشر
📦 16-TSSOP
Same 16-TSSOP PLL Ethernet clock-source family with different ordering suffix; grade and temperature differences require verification

📋 بديل مرجعي (غير موجود في الكتالوج)

ICS650G-40 الحدود القصوى والخصائص الكهربائية

Device Type Clock/frequency synthesizer and Ethernet switch clock source
PLL Yes
Input Type Clock and crystal
نوع الخرج Clock
Number of Circuits 1
Nominal Crystal Input Frequency 25 MHz
Maximum Listed Frequency 25 MHz
Input-to-Output Ratio 1:3
Clocking Technology Phase-locked loop
Primary Application Ethernet switch clock source
Related Variant Package 16-TSSOP, 0.173 inch (4.40 mm) width
Mounting Method Surface mount
حالة RoHS unknown
REACH Status unknown

دليل تكوين أطراف ICS650G-40 16-tssop, 0.173 inch (4.40 mm) width

تكوين الأطراف لـ ICS650G-40 (حزمة 16-tssop, 0.173 inch (4.40 mm) width). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 16-tssop, 0.173 inch (4.40 mm) width لـ ICS650G-40

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ICS650G-40.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ICS650G-40 مناسب لـ 6 التطبيقs: Ethernet Switching ASIC Clocking, Managed Network Switch Platform, Network Interface Card Timing, Telecommunications Ethernet Equipment, Industrial Ethernet Control System, Ethernet Media Converter.

🌐

Ethernet Switching ASIC Clocking

The ICS650G-40 is appropriate for supplying a central timing reference to an Ethernet switching ASIC that needs related clocks derived from a single source. Its PLL-based architecture accepts a 25 MHz crystal reference and offers selectable clock outputs, allowing the switching fabric and associated interface blocks to use a coordinated timing plan. The 1:3 ratio associated with the family can support systems where a three-times-reference clock is required. Design the clock tree to keep routing short, maintain controlled return paths, and separate this low-level timing network from switching power stages and high-current data paths.

🖥️

Managed Network Switch Platform

A managed Ethernet switch can use the ICS650G-40 as a compact clock source for switching logic, packet-processing blocks, and interface-related timing. Using a 25 MHz crystal reference as the common origin simplifies synchronization compared with distributing several unrelated oscillators. The PLL architecture permits selectable output frequencies, which helps designers adapt one timing component to multiple internal clock domains. Place the device near the switching ASIC clock inputs, keep the crystal path short, and verify ground-return continuity so reference and PLL signals remain predictable under switching loads.

🔧

Network Interface Card Timing

The ICS650G-40 can support timing generation in a network interface card that includes Ethernet switching or multiple interface-clock domains. A 25 MHz crystal supplies the reference, while the PLL produces selectable outputs for controller, interface, and status timing. This approach can reduce discrete clock-component count and centralize frequency selection. Because Ethernet interfaces may combine high-speed data routing with sensitive clock edges, isolate the oscillator network from connector and magnetics-related return currents, use a controlled reference layout, and validate the complete timing budget against the interface ASIC requirements.

🏭

Telecommunications Ethernet Equipment

In telecommunications Ethernet equipment, the ICS650G-40 can serve as a dedicated clock source for switching subsystems requiring coordinated, selectable frequencies. Centralizing timing around a 25 MHz crystal reference supports repeatable board-level clock distribution and simplifies identification of the timing origin during troubleshooting. The device should be placed according to the manufacturer reference layout, with its supply, ground, crystal, and output paths kept away from high-current switching stages. Confirm operating-temperature grade and supply limits for the equipment enclosure before approving the exact ordering suffix.

⚡

Industrial Ethernet Control System

The ICS650G-40 is suitable for industrial Ethernet switching blocks that require a stable reference and selectable clock outputs in a compact surface-mount footprint. The 25 MHz crystal input provides a clear timing source for the controller and communication interfaces, while PLL-derived outputs reduce the number of independent timing chains. Place the clock device close to the circuitry that consumes its outputs and route its reference connections away from motors, relays, and power-conversion stages. Use the manufacturer pin and electrical tables to establish bypass capacitance, grounding, and operating limits for the specific controller platform.

📡

Ethernet Media Converter

A compact Ethernet media converter can use the ICS650G-40 when it contains several clock-consuming blocks requiring a common reference. Deriving selectable outputs from a 25 MHz crystal can simplify synchronization between the network interface, conversion logic, and status-control electronics. The component's clock-only function makes it best suited to digital timing support rather than analog signal conditioning. Keep the reference oscillator mechanically stable, provide a low-impedance ground connection, and review output loading and frequency accuracy in the manufacturer datasheet before finalizing the board layout.

ملخص المنتجات الموصى بها

ICS650G-40A Related PLL-based Ethernet switch clock source يُستخدم في: Ethernet Switching ASIC Clocking, Managed Network Switch Platform, Network Interface Card Timing, Industrial Ethernet Control System, Ethernet Media Converter ICS650-40 Related 25 MHz crystal-input clock generator يُستخدم في: Ethernet Switching ASIC Clocking, Network Interface Card Timing, Telecommunications Ethernet Equipment, Ethernet Media Converter ICS650G-40ALF Related clock-generator option for Ethernet equipment يُستخدم في: Managed Network Switch Platform, Telecommunications Ethernet Equipment, Industrial Ethernet Control System
What is the ICS650G-40 used for?
The ICS650G-40 is an Ethernet switch clock source built around a phase-locked loop and a selectable clock-output stage. According to the manufacturer datasheet, it accepts a 25 MHz crystal reference and generates output clock frequencies for Ethernet switch applications. It is used when a switching platform needs multiple related timing signals derived from one reference, reducing the need for separate oscillators and divider networks.
What clock frequencies can ICS650G-40 generate?
The ICS650G-40 generates selectable clock outputs from a 25 MHz crystal reference, but the complete output-frequency list is not reproduced here. The manufacturer datasheet describes the available frequencies through the Output Select configuration. Use that table to map the required switch, transceiver, and management clocks before assigning the output-select pins or validating system timing margins.
What is the input-to-output ratio of ICS650G-40?
The listed ICS650G-40 clock-source ratio is 1:3, corresponding to a 25 MHz reference and a three-times-reference clock relationship. The manufacturer datasheet identifies a 25 MHz crystal input and the PLL-based architecture. Confirm the selected output configuration in the Output Select table because the available frequency choices depend on the device settings and external reference arrangement.
Is ICS650G-40 pin-compatible with ICS650-40?
ICS650-40 is the closest documented family member, but the manufacturer datasheet must be checked for exact pin assignments and package details before treating it as a drop-in replacement. Both devices use PLL-based Ethernet switch clock generation and are listed for a 25 MHz crystal reference. The omission of the G suffix should not be interpreted as proof of identical pinout, supply voltage, temperature grade, or output-frequency options.
What is the best drop-in replacement for ICS650G-40?
ICS650G-40A is the closest documented drop-in candidate because it remains in the ICS650G-40 clock-source family and is identified in a 16-TSSOP package. It has the same PLL-based Ethernet-switch positioning and 25 MHz input limit. Confirm ordering-code temperature grade, pin names, supply limits, and Output Select behavior against the manufacturer datasheet before approving it for an existing PCB.
Can ICS650G-40A replace ICS650G-40?
ICS650G-40A can be considered for replacement because the manufacturer listing describes it as the same PLL-based Ethernet switch clock source in a 16-TSSOP package. Its listed characteristics include a 25 MHz maximum frequency, crystal or clock input, and a 1:3 ratio. Final substitution approval still requires checking pin compatibility, electrical limits, temperature grade, and the exact selectable output frequencies.
Where can I download the ICS650G-40 datasheet PDF?
The ICS650G-40 manufacturer datasheet PDF is available from the Integrated Circuit Systems datasheet link listed on this page. The document describes the part as an Ethernet switch clock source and covers its PLL, 25 MHz crystal input, output-select options, electrical characteristics, and package information. Use the document identifier and revision printed inside the PDF for controlled engineering release.
Where can I find the ICS650G-40 pinout?
Use the pin-description table and package drawing in the manufacturer datasheet to locate the ICS650G-40 pinout. The pinout should be checked against the exact ordering code and package suffix used for production, because related ICS650G-40 variants may differ in grade or ordering information. Do not infer pin function from the clock-output function alone; verify power, ground, control, crystal, and output-select assignments before routing the PCB.
What are the key specifications engineers should know about ICS650G-40?
The ICS650G-40 is a single-circuit PLL clock synthesizer with clock or crystal input, clock output, a 25 MHz maximum listed frequency, and a 1:3 input-to-output ratio. It is designed as an Ethernet switch clock source. These figures describe its primary timing role; supply voltage, output loading, jitter, operating temperature, and the complete selectable-frequency list must be taken from the manufacturer datasheet.
Where to buy ICS650G-40 online?
Use the Request a Quote form on this page to request ICS650G-40 availability, unit pricing, and lot information. The form allows the requested quantity and target package or ordering details to be reviewed before an order is confirmed. Current distributor inventory changes continuously, so request current stock and lead time rather than relying on a historical catalog record.
What is the price of ICS650G-40?
Current ICS650G-40 pricing and quantity availability should be requested through the Request a Quote form on this page. The structured price information on the page is updated as market listings change. For prototype evaluation, provide the required quantity and package suffix; for production, request a dated quotation that includes operational availability and any lot constraints.
What is the lead time for ICS650G-40?
Current lead time for ICS650G-40 should be confirmed through the Request a Quote form on this page. Lead time can vary with the exact ordering code, package suffix, temperature grade, and requested lot quantity. A production schedule should therefore use the supplier's written confirmation for the specific MPN rather than a generic availability statement.
Is ICS650G-40 in stock?
Use the Request a Quote form on this page to check current ICS650G-40 stock for the exact ordering code and quantity required. Because this is a specialized timing component with several related suffixes, stock status must be tied to the selected package and grade. Historical distributor records can be outdated, so use the current quotation response for purchasing decisions.
When should I choose ICS650G-40 over another Ethernet clock source?
Choose the ICS650G-40 when an Ethernet switch design requires a 25 MHz crystal reference, PLL-based selectable clock outputs, and a clock-source function intended specifically for switching equipment. It is preferable when one reference must feed several related timing domains. Consider an alternative only when it preserves the footprint, pin functions, output-frequency set, supply requirements, timing performance, and lifecycle needs.
Is ICS650G-40 suitable for a network interface card?
The ICS650G-40 is suitable for an Ethernet interface card that uses the 25 MHz reference and requires PLL-derived clock outputs for switch or interface timing. It is especially relevant when the board is centered on Ethernet switching silicon and needs selectable output frequencies. Confirm output drive, supply voltage, jitter, and package details in the manufacturer datasheet before integrating it beside high-speed transceiver circuitry.
What can replace ICS650G-40 in an Ethernet switch design?
ICS650G-40A and ICS650-40 are the principal documented candidates, with ICS650G-40A identified as a 16-TSSOP PLL clock synthesizer for Ethernet switches. A replacement is only drop-in after its pinout, package, output-select truth table, electrical limits, and frequency performance have been checked. Suffix changes can alter grade or packaging, so a cross-reference entry alone does not establish drop-in compatibility.

بيانات مرجعية هندسية لـ ICS650G-40 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose ICS650G-40 for an Ethernet switch design centered on a 25 MHz crystal reference and PLL-derived, selectable clock outputs. It is particularly appropriate when the system needs a dedicated clock-source function and a documented 1:3 clock relationship. Choose ICS650G-40A when its 16-TSSOP implementation and ordering grade meet the board requirements, after checking the complete pin and frequency tables. Choose ICS650-40 only after confirming that its package and pin configuration exactly match the installed device. ICS650G-40ALF may be suitable when its suffix-specific temperature grade and ordering characteristics satisfy the equipment requirements. For every alternative, verify the output-select truth table, jitter, load capability, supply limits, and lifecycle status rather than relying only on family naming or package width.

المقارنة مع البدائل

المعامل هذا المنتج ICS650G-40A ICS650-40 ICS650G-40ALF
Brand Integrated Circuit Systems Renesas Electronics Integrated Circuit Systems Renesas Electronics
Device Type Clock/frequency synthesizer and Ethernet switch clock source Clock/frequency synthesizer Ethernet switch clock chip Clock generator, PLL, frequency synthesizer
Output Type Clock Clock Selectable output clock frequencies Clock
PLL Yes Yes Yes Yes
Primary Application Ethernet switch clock source Ethernet switch core clock Ethernet switch clock source Ethernet clock generation

أبرز الفروقات

  • Purpose-built Ethernet switch clock-source function (مقابلICS650G-40A)
  • Common 25 MHz crystal reference architecture (مقابلICS650-40)
  • Established 16-TSSOP family option (مقابلICS650G-40ALF)

ملاحظات التصميم

Place the ICS650G-40 close to the switching ASIC or other clock-consuming circuitry, and route each clock output directly to its destination. Keep the 25 MHz crystal path and PLL connection compact, provide an uninterrupted ground reference, and avoid routing the oscillator network beneath or alongside high-current switching nodes. The physical placement and grounding arrangement are critical because clock-edge displacement and reference noise can affect system-level timing even when nominal output frequencies are correct.

Use the manufacturer datasheet to determine the supply voltage, input capacitance, bypass requirements, and allowable output loading before finalizing the power network. Place required bypass capacitors at the corresponding device pins with short ground returns, and keep switching-regulator loops away from the crystal and PLL traces. Validate the clock source across minimum, nominal, and maximum switching loads because a board that clocks correctly at startup may still show timing errors when Ethernet traffic changes the power-system load.

Do not select a replacement from the part-number family alone. Verify package dimensions, pin numbering, power and ground assignments, crystal connection, Output Select truth table, output frequencies, supply limits, temperature grade, and clock-loading requirements. In particular, suffixes such as A, ALF, T, and ALFT may distinguish ordering, grade, or packaging information rather than adding a new function. A drop-in decision should be documented against the exact manufacturer pin table and electrical limits.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

No definitive environmental or automotive qualification statements were identified for the exact ICS650G-40 ordering code.

تم التحقق من البيانات في: 2026-11-16 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ICS650G-40 datasheet ICS650G-40 datasheet pdf ICS650G-40 pinout ICS650G-40 equivalent ICS650G-40 replacement ICS650G-40 cross reference ICS650G-40 vs ICS650G-40A ICS650G-40 25 MHz clock source ICS650G-40 Ethernet switch clock ICS650G-40 price ICS650G-40 stock Integrated Circuit Systems ICS650G-40

المكونات والمصطلحات ذات الصلة

Integrated Circuit Systems ICS650G-40 ICS650G-40A ICS650-40 ICS650G-40ALF Renesas Electronics Ethernet switch Ethernet switch clock source clock synthesizer clock generator frequency synthesizer phase-locked loop PLL 25 MHz crystal clock output Output Select 1:3 input-to-output ratio TSSOP-16 surface mount network interface card industrial Ethernet telecommunications equipment clock tree managed network switch
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر