ICS722MT - 28MHz 3.3V Low-Jitter VCXO | Renesas Electronics
MPN: ICS722MT ✓ نشطICS722MT نظرة عامة
A VCXO is a crystal-based oscillator whose output frequency can be varied with an external control voltage. In the broader electronics hierarchy, a VCXO is a frequency-control IC and a specialized form of oscillator, while also belonging to the clock and timing component family. It is commonly used when a system needs a modest frequency correction, tuning, or synchronization capability that a conventional fixed-frequency crystal oscillator cannot provide.
The ICS722MT combines a 3.3 V operating design with CMOS output and an integrated voltage-controlled crystal oscillator architecture. Its stated purpose is to replace expensive discrete VCXO modules while maintaining low jitter and high performance. The 28 MHz maximum frequency makes it appropriate for clocking, communication, modulation, and frequency-synthesis interfaces operating below the device’s upper frequency limit.
The 8-SOIC package provides a conventional surface-mount footprint with exposed pins suitable for automated assembly and PCB integration. The absence of an internal PLL means the device is intended for direct crystal-based voltage-controlled frequency generation rather than programmable multi-ratio frequency synthesis. This simpler architecture can help reduce design complexity when the required adjustment range and jitter performance are adequately matched to the target system.
Typical uses include RF and wireless communication modules, data-conversion systems, instrumentation, and embedded timing networks where an adjustable reference clock is useful. In these applications, the VCXO can compensate for crystal tolerances, temperature-related frequency shifts, or small system-level timing corrections. The CMOS output can interface with compatible digital timing and signal-chain circuitry when voltage, rise-time, and drive requirements are checked.
Designers should pay attention to the control-voltage range, gain, tuning sensitivity, load capacitance, output waveform, and stability characteristics when evaluating the ICS722MT for a new board. The crystal choice and the surrounding input network are as important as the IC itself because they determine the usable tuning range and phase-noise performance. This page combines the manufacturer-linked technical identity, package information, comparison fields, and practical design guidance to support component selection and PCB planning.
بدائل مباشرة لـ ICS722MT — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.
اطلب بدائلICS722MT المواصفات
| Device Type | Voltage Controlled Crystal Oscillator (VCXO) |
| Maximum Frequency | 28 MHz |
| Nominal Frequency | 27 MHz |
| جهد التغذية | 3.3 V |
| Input Type | Crystal |
| نوع الخرج | CMOS |
| PLL | No |
| Number of Circuits | 1 |
| Input-to-Output Ratio | 2:1 |
| العلبة | 8-SOIC (0.154 inch, 3.90 mm width) |
| نوع التركيب | Surface Mount |
دليل تكوين أطراف ICS722MT 8-soic (0.154 inch, 3.90 mm width)
تكوين الأطراف لـ ICS722MT (حزمة 8-soic (0.154 inch, 3.90 mm width)). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ICS722MT.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
ICS722MT مناسب لـ 6 التطبيقs: RF and Wireless Communication Clocks, Data Conversion and Digital Timing, Instrumentation and Measurement Equipment, Industrial Control and Automation, Frequency Correction and Calibration, Embedded Synchronization Networks.
RF and Wireless Communication Clocks
The ICS722MT suits communication modules requiring an adjustable crystal-based clock rather than a fixed-frequency source. Its documented maximum frequency is 28 MHz, its supply design is 3.3 V, and its output is CMOS, making it suitable for compatible RF, modulation, and data-path timing circuits. The voltage-control input can compensate for small crystal or system frequency errors when the manufacturer’s tuning characteristics are satisfied. Designers should calculate the required control voltage and verify gain, range, stability, and jitter before committing the external crystal and filter network.
موصى به
Data Conversion and Digital Timing
The ICS722MT can provide an adjustable CMOS clock for data-conversion, digitization, and digital timing subsystems. Its single-circuit VCXO architecture and 2:1 input-to-output ratio should be matched carefully to the system clock tree, while the 28 MHz maximum frequency sets an upper limit for the intended operating point. A controlled oscillator is useful where reference-clock correction improves synchronization. Validate output levels, edge quality, load requirements, and startup behavior against the receiving logic, and use the recommended crystal-load network to preserve stability.
موصى به
Instrumentation and Measurement Equipment
The ICS722MT is applicable to instrumentation architectures that need a locally adjustable timing reference. A voltage-controlled crystal oscillator allows calibration or fine correction without relying on a fixed-frequency oscillator, while the 3.3 V CMOS implementation integrates naturally with compatible modern digital circuitry. The nominal 27 MHz and maximum 28 MHz description makes it relevant to measurement and signal-processing blocks operating below that ceiling. Engineers should confirm phase-noise, jitter, tuning-range, and long-term-stability requirements in the manufacturer datasheet before using it as a precision reference.
موصى به
Industrial Control and Automation
The ICS722MT can support timing functions in industrial control equipment where a small adjustable clock correction is useful. Its surface-mount 8-SOIC package supports compact board construction, and the single CMOS oscillator provides a straightforward clock output for digital control logic. Because an industrial system may impose temperature and reliability requirements, verify the device’s operating-temperature and qualification information before deployment. The crystal selection, control-voltage conditioning, and output loading determine whether the oscillator maintains stable startup and useful tuning performance.
موصى به
Frequency Correction and Calibration
The ICS722MT is well suited to calibration and frequency-correction functions because a VCXO output can be adjusted through its control voltage. A 27 MHz nominal crystal-based device provides a compact way to tune a clock while using a 3.3 V supply and CMOS output. In a calibration loop, the control voltage must remain inside the valid tuning range, and the selected crystal and load network must meet the required startup and stability conditions. Verify output jitter and frequency stability against the measurement accuracy needed by the finished system.
موصى به
Embedded Synchronization Networks
The ICS722MT can be used in embedded synchronization networks that benefit from a locally adjustable clock. Its 28 MHz maximum frequency, CMOS output, and 8-SOIC surface-mount package align with compact communications and processing boards. If several modules must maintain related timing, account for the oscillator’s tuning gain and the control network’s noise when setting the correction voltage. Confirm startup margins and load capacitance with the manufacturer’s reference circuit, and avoid assuming that a 3.3 V VCXO can directly replace every 5 V oscillator.
موصى به
بيانات مرجعية هندسية لـ ICS722MT — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
ملاحظات التصميم
Follow the manufacturer’s reference layout for the crystal, load capacitors, control-voltage input, and CMOS output. Keep oscillator traces short, keep the control-voltage trace away from high-current switching paths, and provide a low-impedance ground return. Place the crystal close to the IC and avoid routing fast digital or high-voltage nodes beneath the oscillator area.
Treat the VCXO control voltage as an analog control signal. Filter it when necessary to prevent noise from modulating the output frequency, and avoid placing switching-regulator or digital-clock return currents near the control input. Confirm the control-voltage range, tuning gain, and output frequency versus control voltage before designing the adjustment circuitry.
Do not substitute a fixed-frequency oscillator without checking the supply voltage, output logic level, frequency range, package footprint, and startup requirements. The ICS722MT has a crystal input, CMOS output, no PLL, and a 2:1 input-to-output ratio. Use the manufacturer’s recommended crystal load capacitance and application circuit to preserve reliable startup and intended tuning behavior.
معلومات الامتثال
The available product information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to the identified non-automotive-qualified device designation.