Renesas Electronics

ICS722MT - 28MHz 3.3V Low-Jitter VCXO | Renesas Electronics

MPN: ICS722MT ✓ 啟用中
3.3 V Vdss 8-SOIC (0.154 inch, 3.90 mm width) Package 28 MHz Speed
MOQ: 1 |

ICS722MT 概覽

The Renesas Electronics ICS722MT is a 28 MHz voltage-controlled crystal oscillator (VCXO) IC designed for low-cost, low-jitter frequency-control applications in a 3.3 V power environment. The device accepts a crystal input and provides a CMOS output, with a maximum frequency of 28 MHz and an input-to-output ratio of 2:1. It is packaged in an 8-pin SOIC, making it suitable for compact communications, timing, and clock-generation designs that require adjustable frequency control rather than a fixed-frequency oscillator.

A VCXO is a crystal-based oscillator whose output frequency can be varied with an external control voltage. In the broader electronics hierarchy, a VCXO is a frequency-control IC and a specialized form of oscillator, while also belonging to the clock and timing component family. It is commonly used when a system needs a modest frequency correction, tuning, or synchronization capability that a conventional fixed-frequency crystal oscillator cannot provide.

The ICS722MT combines a 3.3 V operating design with CMOS output and an integrated voltage-controlled crystal oscillator architecture. Its stated purpose is to replace expensive discrete VCXO modules while maintaining low jitter and high performance. The 28 MHz maximum frequency makes it appropriate for clocking, communication, modulation, and frequency-synthesis interfaces operating below the device’s upper frequency limit.

The 8-SOIC package provides a conventional surface-mount footprint with exposed pins suitable for automated assembly and PCB integration. The absence of an internal PLL means the device is intended for direct crystal-based voltage-controlled frequency generation rather than programmable multi-ratio frequency synthesis. This simpler architecture can help reduce design complexity when the required adjustment range and jitter performance are adequately matched to the target system.

Typical uses include RF and wireless communication modules, data-conversion systems, instrumentation, and embedded timing networks where an adjustable reference clock is useful. In these applications, the VCXO can compensate for crystal tolerances, temperature-related frequency shifts, or small system-level timing corrections. The CMOS output can interface with compatible digital timing and signal-chain circuitry when voltage, rise-time, and drive requirements are checked.

Designers should pay attention to the control-voltage range, gain, tuning sensitivity, load capacitance, output waveform, and stability characteristics when evaluating the ICS722MT for a new board. The crystal choice and the surrounding input network are as important as the IC itself because they determine the usable tuning range and phase-noise performance. This page combines the manufacturer-linked technical identity, package information, comparison fields, and practical design guidance to support component selection and PCB planning.

直接替換替代品,適用於 ICS722MT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此產品無可直接替換的替代品。

申請替代品

ICS722MT 規格

Device Type Voltage Controlled Crystal Oscillator (VCXO)
Maximum Frequency 28 MHz
Nominal Frequency 27 MHz
供應電壓 3.3 V
Input Type Crystal
輸出類型 CMOS
PLL No
Number of Circuits 1
Input-to-Output Ratio 2:1
封裝 8-SOIC (0.154 inch, 3.90 mm width)
安裝類型 Surface Mount

ICS722MT 8-soic (0.154 inch, 3.90 mm width) 腳位配置指南

ICS722MT(8-soic (0.154 inch, 3.90 mm width) 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

ICS722MT 的 8-soic (0.154 inch, 3.90 mm width) 封裝腳位圖

無詳細腳位定義資料: ICS722MT.

請參閱 資料表 以查看完整腳位配置。

典型應用

ICS722MT 適用於 6 應用s: RF and Wireless Communication Clocks, Data Conversion and Digital Timing, Instrumentation and Measurement Equipment, Industrial Control and Automation, Frequency Correction and Calibration, Embedded Synchronization Networks.

🌐

RF and Wireless Communication Clocks

The ICS722MT suits communication modules requiring an adjustable crystal-based clock rather than a fixed-frequency source. Its documented maximum frequency is 28 MHz, its supply design is 3.3 V, and its output is CMOS, making it suitable for compatible RF, modulation, and data-path timing circuits. The voltage-control input can compensate for small crystal or system frequency errors when the manufacturer’s tuning characteristics are satisfied. Designers should calculate the required control voltage and verify gain, range, stability, and jitter before committing the external crystal and filter network.

🔧

Data Conversion and Digital Timing

The ICS722MT can provide an adjustable CMOS clock for data-conversion, digitization, and digital timing subsystems. Its single-circuit VCXO architecture and 2:1 input-to-output ratio should be matched carefully to the system clock tree, while the 28 MHz maximum frequency sets an upper limit for the intended operating point. A controlled oscillator is useful where reference-clock correction improves synchronization. Validate output levels, edge quality, load requirements, and startup behavior against the receiving logic, and use the recommended crystal-load network to preserve stability.

📡

Instrumentation and Measurement Equipment

The ICS722MT is applicable to instrumentation architectures that need a locally adjustable timing reference. A voltage-controlled crystal oscillator allows calibration or fine correction without relying on a fixed-frequency oscillator, while the 3.3 V CMOS implementation integrates naturally with compatible modern digital circuitry. The nominal 27 MHz and maximum 28 MHz description makes it relevant to measurement and signal-processing blocks operating below that ceiling. Engineers should confirm phase-noise, jitter, tuning-range, and long-term-stability requirements in the manufacturer datasheet before using it as a precision reference.

🏭

Industrial Control and Automation

The ICS722MT can support timing functions in industrial control equipment where a small adjustable clock correction is useful. Its surface-mount 8-SOIC package supports compact board construction, and the single CMOS oscillator provides a straightforward clock output for digital control logic. Because an industrial system may impose temperature and reliability requirements, verify the device’s operating-temperature and qualification information before deployment. The crystal selection, control-voltage conditioning, and output loading determine whether the oscillator maintains stable startup and useful tuning performance.

⚡

Frequency Correction and Calibration

The ICS722MT is well suited to calibration and frequency-correction functions because a VCXO output can be adjusted through its control voltage. A 27 MHz nominal crystal-based device provides a compact way to tune a clock while using a 3.3 V supply and CMOS output. In a calibration loop, the control voltage must remain inside the valid tuning range, and the selected crystal and load network must meet the required startup and stability conditions. Verify output jitter and frequency stability against the measurement accuracy needed by the finished system.

🧩

Embedded Synchronization Networks

The ICS722MT can be used in embedded synchronization networks that benefit from a locally adjustable clock. Its 28 MHz maximum frequency, CMOS output, and 8-SOIC surface-mount package align with compact communications and processing boards. If several modules must maintain related timing, account for the oscillator’s tuning gain and the control network’s noise when setting the correction voltage. Confirm startup margins and load capacitance with the manufacturer’s reference circuit, and avoid assuming that a 3.3 V VCXO can directly replace every 5 V oscillator.

What is the ICS722MT?
The ICS722MT is a Renesas Electronics voltage-controlled crystal oscillator IC operating from a 3.3 V supply and producing a CMOS clock output. According to the ICS722MT datasheet information, it is a low-cost, low-jitter VCXO intended to replace expensive discrete VCXO modules. Its maximum frequency is 28 MHz, it uses a crystal input, and it has no PLL.
What is the operating frequency of ICS722MT?
The ICS722MT supports frequencies up to 28 MHz and is identified as a nominal 27 MHz VCXO in its datasheet description. The device uses a crystal input with a 2:1 input-to-output ratio. When selecting a crystal and external load network, confirm that the intended operating point and required frequency tolerance are covered by the manufacturer’s electrical characteristics.
What type of oscillator is ICS722MT?
The ICS722MT is a voltage-controlled crystal oscillator, or VCXO, with a crystal input and CMOS output. A VCXO belongs to the clock and timing IC family and provides an adjustable output frequency using an external control voltage. The ICS722MT does not contain a PLL, so it is intended for direct crystal-based frequency control rather than programmable ratio synthesis.
Where can I download the ICS722MT datasheet PDF?
The manufacturer datasheet is available through Renesas Electronics at the ICS722MT datasheet page: https://www.renesas.com/en/document/dst/722-datasheet. The document is the appropriate reference for the complete pin description, electrical characteristics, recommended application circuit, control-voltage behavior, crystal-load requirements, and absolute maximum ratings.
Where can I find the ICS722MT pinout?
The ICS722MT uses an 8-pin SOIC package, and its pin assignments are defined in the manufacturer datasheet. Use the pin-description table and package drawing on the Renesas 722 datasheet page rather than relying on a generic SOIC diagram, because the supply, control-voltage, crystal, and CMOS output connections are specific to this device.
What is the supply voltage of ICS722MT?
The ICS722MT is designed for a 3.3 V operating environment and uses a CMOS output. The datasheet should be consulted for the complete allowable supply-voltage range, input thresholds, output levels, and absolute maximum limits. These values determine whether the device interfaces correctly with the surrounding digital logic and whether level translation is required.
Does ICS722MT contain a PLL?
No. The ICS722MT is listed with PLL operation disabled, and it uses a crystal input to generate a CMOS output. This makes it suitable for applications requiring a directly controlled crystal oscillator, but it is not a programmable PLL-based frequency synthesizer. Systems needing selectable ratios or synthesized frequencies should use a different clock-generator architecture.
Can ICS722MT replace a discrete VCXO module?
The ICS722MT is specifically described as a low-cost, low-jitter 3.3 V VCXO intended to replace expensive discrete VCXO modules. A module-level replacement still requires checking the control-voltage range, tuning sensitivity, crystal frequency, load capacitance, output waveform, supply sequencing, and package footprint. It is not automatically interchangeable with every discrete VCXO.
What applications use the ICS722MT?
The ICS722MT is appropriate for adjustable clocking in communication equipment, RF and wireless modules, instrumentation, data-conversion systems, and embedded timing networks. Its 28 MHz maximum frequency and CMOS output suit digital clock domains where a small frequency correction is needed. The crystal and control network must be designed around the device’s specified tuning and stability limits.
How do I design the crystal circuit for ICS722MT?
Start with a crystal whose frequency, load capacitance, and stability match the ICS722MT application. Then follow the manufacturer’s recommended oscillator and load-capacitance network, including the control-voltage biasing arrangement. The crystal, load capacitors, trace parasitics, and control-voltage filtering directly influence startup, tuning range, phase noise, and output stability.
What is the best drop-in replacement for ICS722MT?
A true drop-in replacement must use the same 8-SOIC footprint and provide compatible supply, crystal, control-voltage, output, and frequency characteristics. The available cross-reference results identify lookup tools but do not name a verified pin-compatible substitute. Consequently, no alternative is listed without an explicit manufacturer cross-reference or a validated equivalent.
Is the ICS722MT available for purchase?
The manufacturer and distributor listings identify the ICS722MT as an orderable Renesas Electronics component, but current stock and lead time can change. Use the Request a Quote form on this page to request current availability, packaging details, minimum order quantity, and delivery timing for your project.
What is the price of ICS722MT?
Current pricing for the ICS722MT is best requested through the Request a Quote form on this page. The structured price evidence for this MPN does not contain a qualifying quantity-break listing, so no static price is published here. The quote request can be used to obtain current pricing, stock status, and lead-time information.
How long is the lead time for ICS722MT?
The ICS722MT lead time depends on current manufacturer inventory, distributor stock, and the requested quantity. Use the Request a Quote form on this page for a current lead-time confirmation. Providing the required quantity, package preference, and target delivery date helps procurement determine the most appropriate sourcing path.
When should I choose ICS722MT over a fixed-frequency oscillator?
Choose the ICS722MT when the design needs adjustable frequency, synchronization, or small correction of a crystal-based clock. A fixed-frequency oscillator is simpler and may be preferable when no tuning is required. ICS722MT is appropriate when its 28 MHz limit, 3.3 V supply, CMOS output, and specified tuning characteristics satisfy the system requirements.
Is ICS722MT the same as an ordinary crystal oscillator?
The ICS722MT is an IC-based VCXO rather than a simple fixed-frequency oscillator. Both use crystal-based frequency generation, but the ICS722MT adds voltage-controlled frequency adjustment and a CMOS output stage. Its 3.3 V supply, 28 MHz maximum frequency, crystal input, and 2:1 input-to-output ratio must be considered when replacing a conventional oscillator.
What are the key specifications of ICS722MT that engineers should know?
The key documented specifications are a 3.3 V supply design, nominal 27 MHz operation, 28 MHz maximum frequency, crystal input, CMOS output, no PLL, one oscillator circuit, and a 2:1 input-to-output ratio. It is packaged in an 8-SOIC. The datasheet remains the controlling reference for tuning range, jitter, stability, and electrical limits.
Can ICS722MT be used in industrial or automotive equipment?
ICS722MT can be evaluated for industrial timing or communication systems if its operating-temperature and reliability ratings meet the equipment requirements. The available product information does not identify the ICS722MT as AEC-Q100-qualified, so it should not be treated as an automotive-qualified replacement without separate manufacturer confirmation. Check temperature grade, qualification, and lifecycle requirements.

工程參考資料,適用於 ICS722MT — 比較、設計指引及合規資訊。

選型指南

Choose the ICS722MT when a design requires a crystal-based clock whose frequency can be adjusted with a control voltage, particularly below its 28 MHz maximum frequency. Its 3.3 V supply design, CMOS output, crystal input, and 2:1 ratio make it appropriate for compatible communications, instrumentation, and synchronization circuits. Select a fixed-frequency oscillator instead when no tuning function is required and simplicity or lower functional complexity is more important. Because the product is a VCXO rather than a PLL synthesizer, it is not a direct replacement for programmable clock-generator ICs with selectable ratios. Before committing to the ICS722MT, verify the control-voltage range, tuning sensitivity, load capacitance, jitter, stability, operating temperature, and output timing in the Renesas datasheet. The absence of a verified pin-compatible substitute means lifecycle planning should focus on manufacturer supply and current authorized sourcing rather than an assumed cross-reference part.

設計說明

Follow the manufacturer’s reference layout for the crystal, load capacitors, control-voltage input, and CMOS output. Keep oscillator traces short, keep the control-voltage trace away from high-current switching paths, and provide a low-impedance ground return. Place the crystal close to the IC and avoid routing fast digital or high-voltage nodes beneath the oscillator area.

Treat the VCXO control voltage as an analog control signal. Filter it when necessary to prevent noise from modulating the output frequency, and avoid placing switching-regulator or digital-clock return currents near the control input. Confirm the control-voltage range, tuning gain, and output frequency versus control voltage before designing the adjustment circuitry.

Do not substitute a fixed-frequency oscillator without checking the supply voltage, output logic level, frequency range, package footprint, and startup requirements. The ICS722MT has a crystal input, CMOS output, no PLL, and a 2:1 input-to-output ratio. Use the manufacturer’s recommended crystal load capacitance and application circuit to preserve reliable startup and intended tuning behavior.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The available product information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to the identified non-automotive-qualified device designation.

資料驗證日期: 2026-11-11 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

ICS722MT datasheet ICS722MT pinout ICS722MT datasheet pdf ICS722MT equivalent ICS722MT replacement ICS722MT cross reference ICS722MT footprint ICS722MT 28MHz VCXO ICS722MT 3.3V CMOS output ICS722MT 8-SOIC package ICS722MT application circuit Renesas Electronics ICS722MT ICS722MT price ICS722MT stock ICS722MT lead time

相關元件與詞彙

Renesas Electronics ICS722MT voltage-controlled crystal oscillator VCXO crystal oscillator oscillator frequency-control IC clock and timing IC CMOS 28 MHz 27 MHz 3.3 V 2:1 input-to-output ratio 8-SOIC surface mount SMD frequency tuning range tuning sensitivity jitter output frequency stability control voltage RF communication instrumentation industrial control embedded synchronization
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情