Texas Instruments

INA131BPG4 - G=100 Instrumentation Amplifier | Texas Instruments

MPN: INA131BPG4 ✓ نشط
50 µV Vdss 8-pin PDIP Package
الحد الأدنى للطلب: 1 |

INA131BPG4 نظرة عامة

The Texas Instruments INA131BPG4 is a precision instrumentation amplifier with a fixed gain of 100, a three-op-amp internal architecture, single-ended output, and an 8-pin PDIP package. Its stated input offset voltage is 50 µV, its gain-bandwidth characteristic reaches 70 kHz, and its supply-voltage capability extends to ±18 V or 36 V total.

An instrumentation amplifier is a specialized analog signal-conditioning IC designed to amplify the small differential voltage produced by sensors and measurement bridges. In the signal-chain hierarchy, it belongs to the amplifier IC family and supports precision measurement systems that require high input impedance, accurate differential sensing, and stable gain without complex external resistor networks. The INA131 integrates the gain-setting and differential-input functions into one device.

Key characteristics include the fixed gain of 100, a 50 µV input offset voltage, 70 kHz bandwidth, and a single-ended output stage. The fixed-gain architecture simplifies circuit design by eliminating the external gain-setting resistor normally required with general-purpose instrumentation amplifiers. The 8-pin PDIP package also supports conventional through-hole assembly and prototype-board layouts.

The three-op-amp architecture provides differential input handling and a stable internal gain arrangement. Its specified supply range of 2.25 V to 18 V permits operation from a single 2.25 V rail through higher single-supply levels, while the ±18 V capability covers dual-supply instrumentation systems. Because the bandwidth is specified at the fixed gain of 100, the device is most appropriate for sensor signals that do not require high closed-loop bandwidth.

Typical uses include resistive bridge excitation, pressure-sensor interfaces, strain-gauge amplification, industrial current measurement, and laboratory instrumentation. In a bridge circuit, the small differential output of the sensor is amplified by a factor of 100 before conversion by an ADC. In a shunt-measurement system, the INA131 provides differential sensing while rejecting common-mode voltage present across the shunt.

Designers should verify the complete input common-mode range, output swing, input bias current, supply-current behavior, and settling requirements at the intended operating voltage before finalizing the analog front end. Input filtering and source impedance must also be evaluated against the device's published AC and DC accuracy characteristics.

This product page combines the verified ordering information, package details, electrical highlights, drop-in family alternatives, and practical application guidance for engineers evaluating the INA131BPG4 in precision measurement designs.

بدائل مباشرة لـ INA131BPG4 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع INA131BPG4 (نفس عامل الشكل والبصمة) — يختلف في Supply Voltage Range, Amplifier Type, Input Offset Voltage.

Texas Instruments
Supply Voltage Range: ±2.25 V to ±18 V
Amplifier Type: Precision fixed-gain instrumentation amplifier
Input Offset Voltage: 125 µV maximum
قارن مع INA131BPG4 →
Texas Instruments
Amplifier Type: Precision instrumentation amplifier
قارن مع INA131BPG4 →

INA131BP

✅ بديل مباشر
Texas Instruments
📦 8-pin PDIP
Precision instrumentation amplifier · 3 amplifiers · 100 V/V · Fixed gain · 2.25 V to 18 V · 50 V · 70 kHz · 0.7 V/µs

تواصل لمعرفة السعر

عرض ورقة البيانات ←

INA131APG4

✅ بديل مباشر
📦 8-pin PDIP
Same INA131 family in an 8-pin PDIP package; the A suffix differentiates the order code, while the available comparison data does not quantify grade-specific differences.

📋 بديل مرجعي (غير موجود في الكتالوج)

INA131BPG4 الحدود القصوى والخصائص الكهربائية

Product Type Precision instrumentation amplifier
Fixed Gain 100 V/V
Internal Amplifier Count 3 amplifiers
Circuit Count 1 circuit
نوع الخرج Single-ended
Input Offset Voltage 50 µV
Bandwidth 70 kHz
Supply Voltage Range 2.25 V to 18 V
Maximum Supply Voltage ±18 V or 36 V total
العلبة 8-pin PDIP
Package Width 0.300 in (7.62 mm)
نوع التركيب Through-hole
Delivery Package Tube

دليل تكوين أطراف INA131BPG4 tube

تكوين الأطراف لـ INA131BPG4 (حزمة tube). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة tube لـ INA131BPG4

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ INA131BPG4.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

INA131BPG4 مناسب لـ 6 التطبيقs: Resistive Bridge Sensor Interface, Pressure Transducer Conditioning, Precision Current Shunt Measurement, Strain Gauge Amplification, Laboratory Instrumentation Signal Chain, Industrial Process Measurement.

🏭

Resistive Bridge Sensor Interface

INA131BPG4 fits resistive bridge sensor front ends because its fixed gain of 100 amplifies the bridge differential output while the three-op-amp architecture handles the measurement signal path. The 50 µV input offset voltage is useful when the sensed quantity produces a small millivolt-level imbalance. Place the amplifier close to the bridge, maintain symmetry between input routing paths, and verify that bridge excitation and common-mode voltage stay within the input limits. Its 70 kHz bandwidth is appropriate for many temperature, pressure, and position bridges that do not require high-frequency dynamic response.

⚡

Pressure Transducer Conditioning

The INA131BPG4 can condition the differential output of a resistive pressure transducer because the fixed 100:1 gain reduces the required ADC input range without external gain-setting resistors. Its single-ended output simplifies connection to a unipolar converter input, while the 50 µV offset specification supports measurements where bridge imbalance is small. Designers should calculate the maximum output swing across the full sensor and excitation range, keep the bridge return path close to the amplifier ground, and include filtering only where its interaction with the 70 kHz bandwidth remains acceptable.

🖥️

Precision Current Shunt Measurement

INA131BPG4 is applicable to high-side or low-side current-shunt monitoring when the shunt voltage remains inside the amplifier's input range. Its differential input architecture supports rejection of common-mode voltage across the shunt, and the fixed gain of 100 increases millivolt-scale current signals to a more useful analog level. Route the Kelvin sense connections symmetrically and avoid sharing copper with high-current paths, because parasitic resistance can create measurement error. The 70 kHz bandwidth accommodates many power-monitoring loops while remaining unsuitable for very fast current transients.

📱

Strain Gauge Amplification

The INA131BPG4 supports strain-gauge conditioning where mechanical deformation creates a small differential bridge signal. A gain of 100 increases the sensor output before digitization, and the instrumentation-amplifier topology reduces sensitivity to common-mode excitation voltage relative to a simple difference amplifier. For best results, use the bridge's dedicated sense returns, keep input traces short, and establish the system noise and offset budget before adding gain stages. Confirm the 50 µV input offset specification against the minimum strain event that the design must resolve.

🔧

Laboratory Instrumentation Signal Chain

INA131BPG4 is useful in laboratory measurement equipment that accepts differential sensor outputs and requires a predictable fixed gain. The 2.25 V to 18 V supply range supports single-supply designs, and the 8-pin PDIP package simplifies retrofitting into educational or prototype instruments. The 70 kHz bandwidth covers many temperature, level, and force measurements but not precision waveform analysis. Establish grounding and shielding to prevent sensor leads from injecting errors, and verify output headroom when selecting the bridge excitation and input scale.

🏭

Industrial Process Measurement

INA131BPG4 can serve as the analog front end for industrial process sensors when the controller requires a single-ended signal derived from a differential sensor. Its fixed gain of 100 reduces circuit complexity, while the 50 µV offset and 70 kHz bandwidth provide useful baseline characteristics for slow process variables such as pressure, strain, or tank level. The through-hole PDIP package is practical for serviceable control boards. Field designs should include surge protection, input filtering, and proper grounding while confirming that every parameter remains within the limits of the selected INA131 suffix.

ملخص المنتجات الموصى بها

INA131BP Texas Instruments يُستخدم في: Resistive Bridge Sensor Interface, Precision Current Shunt Measurement, Laboratory Instrumentation Signal Chain INA131APG4 Related Texas Instruments INA131 order code يُستخدم في: Pressure Transducer Conditioning, Strain Gauge Amplification, Industrial Process Measurement
Where to buy INA131BPG4 online?
INA131BPG4 can be requested through the Request a Quote form on this page. The exact Texas Instruments MPN is INA131BPG4, a precision instrumentation amplifier supplied in an 8-pin PDIP package with tube packaging. The form allows buyers to specify quantity, delivery requirements, and target package or shipment details without relying on a static price.
What is the price of INA131BPG4?
Use the Request a Quote form on this page for the current INA131BPG4 quotation and commercial terms. The orderable part is the Texas Instruments INA131BPG4 in an 8-pin PDIP package, and its manufacturing and sourcing status can change. The form is the appropriate route for an exact quantity and a current supply commitment.
What is the lead time for INA131BPG4?
The current lead time for INA131BPG4 should be requested through the Request a Quote form on this page. Texas Instruments identifies INA131BPG4 as an orderable 8-pin PDIP instrumentation amplifier, and confirmed lead time depends on order quantity, inventory position, and shipment destination. Supply the required quantity and target date when submitting the request.
Is INA131BPG4 in stock?
Check current availability through the Request a Quote form on this page. The Texas Instruments INA131BPG4 is identified as an active instrumentation-amplifier orderable in an 8-pin PDIP package, but availability at the exact quantity and package configuration should be confirmed at the time of quotation.
What are the key specifications of INA131BPG4 that engineers should know?
The INA131BPG4 is a precision instrumentation amplifier with a fixed gain of 100, three internal amplifiers, a single-ended output, 50 µV input offset voltage, and 70 kHz bandwidth. According to the Texas Instruments INA131 product information, it is an 8-pin PDIP device with a stated supply capability of ±18 V or 36 V total, making it suitable for precision differential-signal conditioning.
What is INA131BPG4 used for?
INA131BPG4 is used to amplify low-level differential sensor signals with a fixed gain of 100. Typical circuits include resistive bridges, pressure transducers, strain gauges, current shunts, and laboratory instrumentation. Its three-op-amp architecture, 50 µV input offset voltage, 70 kHz bandwidth, and single-ended output make it especially useful when an analog measurement signal must be conditioned before ADC conversion.
Is INA131BPG4 suitable for bridge sensor applications?
Yes, INA131BPG4 is suitable for bridge sensor applications because it provides differential amplification at a fixed gain of 100. Its three-op-amp internal architecture and 50 µV input offset voltage are appropriate for measuring the small differential output of pressure, strain, or other resistive bridges. The bridge excitation voltage must remain compatible with the device's input common-mode and supply limits.
What is the difference between INA131BPG4 and INA131BP?
INA131BPG4 and INA131BP are both associated with the Texas Instruments INA131 instrumentation-amplifier family and the same 8-pin PDIP package, but their orderable suffix and grade details must be checked before substitution. The INA131BPG4 designation identifies the specific tube-packed ordering variant, while INA131BP is the alternate order code shown in comparison data; consult the manufacturer ordering table for temperature-grade and marking differences.
INA131BPG4 vs INA131APG4 - which is better for a precision bridge?
Choose INA131BPG4 when its ordering information, operating-temperature range, and marking match the production requirements. INA131APG4 is a related Texas Instruments INA131 order code that appears in comparison data, but the exact electrical grade and suffix-specific parameters are not established by the available manufacturer excerpt. Compare the ordering table and datasheet before treating either order code as a drop-in replacement.
When should I choose INA131BPG4 over an adjustable instrumentation amplifier?
Choose INA131BPG4 when a fixed gain of 100 is sufficient and minimizing external gain-setting components is valuable. Its integrated fixed-gain arrangement simplifies sensor front ends and reduces the number of precision resistors required around the amplifier. An adjustable instrumentation amplifier is preferable only when gain must be changed in the field or varied across multiple product configurations.
Is INA131BPG4 suitable for high-voltage measurement systems?
INA131BPG4 supports supply operation up to ±18 V, or 36 V total, according to the Texas Instruments ordering information. This makes it suitable for many dual-supply precision measurement circuits. The usable input range is not determined solely by the supply rating, so verify input common-mode limits and output swing for the particular signal and load.
What can replace INA131BPG4?
INA131BP and INA131APG4 are the only same-package INA131 family candidates identified in the available comparison information. Their exact suffix, temperature-grade, and electrical-equivalence conditions should be confirmed against the manufacturer ordering table before replacement. A cross-brand substitute is not established because no verified pin-compatible cross-brand part appears in the reference data.
What is the best Texas Instruments equivalent for INA131BPG4?
INA131BP is the closest Texas Instruments ordering candidate shown in the family comparison because it is identified as the same INA131 precision instrumentation amplifier in a DIP package. INA131APG4 is another related family candidate. Neither should be approved solely by package appearance; verify pinout, temperature grade, gain accuracy, offset, bandwidth, and lifecycle status against the manufacturer ordering information.
Can INA131APG4 replace INA131BPG4 without PCB changes?
INA131APG4 may use the same 8-pin PDIP footprint, but a footprint match alone does not guarantee a drop-in replacement. The manufacturer ordering table must confirm identical pin functions, supply range, gain, offset voltage, bandwidth, operating-temperature grade, and marking requirements. Confirm those conditions before substituting INA131APG4 for INA131BPG4 in production.
Where to download the INA131BPG4 datasheet PDF?
Download the INA131BPG4 documentation from the Texas Instruments INA131 product page or the manufacturer datasheet link on this page. The document covers the INA131 family specifications, application information, pin configuration, and ordering options. Use the manufacturer ordering table to identify which suffix-specific details apply to INA131BPG4 rather than relying only on a distributor summary.
Where to find the INA131BPG4 pinout?
The INA131BPG4 pinout is located in the pin-configuration section of the Texas Instruments INA131 datasheet. The part uses an 8-pin PDIP package, so verify all eight pin numbers and functions against the device drawing before assigning PCB tracks. Because a complete published pin list is not reproduced here, use the manufacturer pin-description table as the routing authority.

بيانات مرجعية هندسية لـ INA131BPG4 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose INA131BPG4 when the measurement system needs a fixed gain of 100 and a differential-to-single-ended signal path without external gain-setting resistors. Its 50 µV input offset voltage, 70 kHz bandwidth, and 2.25 V to 18 V supply range make it suitable for bridge sensors, pressure transducers, strain gauges, current shunts, and laboratory instruments with slow-to-moderate bandwidth requirements. INA131BP is a relevant same-package family candidate when its ordering suffix and temperature grade meet the production specification. INA131APG4 is another related order code that should be selected only after its exact electrical and grade details are confirmed. Neither alternative should be treated as automatically interchangeable without checking the Texas Instruments ordering table and pin descriptions.

المقارنة مع البدائل

المعامل هذا المنتج INA131BP INA131APG4
Brand Texas Instruments Texas Instruments Texas Instruments
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP
Product Type Precision instrumentation amplifier Instrumentation amplifier INA131 family instrumentation amplifier

أبرز الفروقات

  • Fixed gain simplifies the analog front end (مقابلINA131BP)
  • Clear single-ended output integration (مقابلINA131APG4)
  • Single-supply flexibility (مقابلINA131BP)

ملاحظات التصميم

Route the two differential inputs as a balanced pair and connect the sensor or bridge return directly to the amplifier reference ground. Keep input traces short and away from switching nodes, relay contacts, and high-current paths. The INA131BPG4 has a fixed gain of 100, so input-routing errors cannot be corrected by reducing the gain. For a bridge circuit, use the sensor's dedicated sense or return conductors instead of sharing copper carrying excitation current.

Treat the 70 kHz bandwidth as the upper limit for useful closed-loop response at the fixed gain of 100. Place any anti-alias or sensor-noise filter close to the amplifier input and calculate its corner frequency with the source impedance included. Excessively low cutoff frequencies can slow the measurement path or interact with sensor capacitance, while insufficient filtering can allow out-of-band noise to reach the ADC.

Verify output-voltage headroom over the complete input range before fixing the sensor excitation voltage. A single-ended output requires adequate voltage range to remain linear at both maximum positive signal and maximum negative signal. The stated 2.25 V to 18 V operating range does not by itself guarantee full output swing, so consult the manufacturer output-swing and common-mode conditions for the selected supply voltage.

Do not select a replacement from package appearance alone. Before using INA131BP or INA131APG4, compare the ordering suffix, pin functions, gain accuracy, input offset, bandwidth, supply limits, operating-temperature grade, and lifecycle status. A same-package designation can conceal a temperature-grade or marking difference that matters in industrial production.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The available manufacturer and distributor information does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The device is not presented as an automotive-qualified AEC-Q100 part.

تم التحقق من البيانات في: 2026-11-14 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

INA131BPG4 datasheet INA131BPG4 pinout INA131BPG4 datasheet pdf INA131BPG4 specifications INA131BPG4 8-PDIP INA131BPG4 gain 100 INA131BPG4 application circuit INA131BPG4 replacement INA131BPG4 equivalent INA131BPG4 vs INA131BP INA131BPG4 price INA131BPG4 stock Texas Instruments INA131BPG4

المكونات والمصطلحات ذات الصلة

Texas Instruments INA131BPG4 INA131BP INA131APG4 precision instrumentation amplifier instrumentation amplifier amplifier IC analog signal-conditioning IC three-op-amp architecture differential input single-ended output fixed gain gain of 100 input offset voltage 70 kHz bandwidth 2.25 V to 18 V supply 8-pin PDIP PDIP package family through-hole mounting tube packaging resistive bridge sensor pressure transducer strain gauge current shunt industrial process measurement
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر