Renesas Electronics

ISL84051IB - 8:1 100Ω Analog Multiplexer | Renesas

MPN: ISL84051IB ✓ نشط
+2 V to +12 V Vdss 100 ohm maximum at ±5 V Rds(on) 16-pin SOIC Package
الحد الأدنى للطلب: 1 |

ISL84051IB نظرة عامة

The Renesas Electronics ISL84051IB is a low-voltage analog multiplexer with an 8:1 configuration, 100 ohm on-resistance, and a 16-pin SOIC package. It operates from a single +2 V to +12 V supply or from dual supplies, allowing it to support both low-voltage portable systems and conventional positive and negative analog rails. The device provides TTL and CMOS-compatible control inputs and an inhibit function for opening all signal paths.

An analog multiplexer is an interface IC that connects one of several input channels to a shared output path. It belongs to the broader analog switch and signal-routing hierarchy, which sits within interface semiconductors and embedded control systems. Multiplexers reduce the number of physical connections required by sensors, test equipment, data acquisition systems, and communication equipment while allowing one converter or processor input to monitor multiple signals.

The ISL84051IB's principal benefits include its 8:1 channel ratio, maximum on-resistance of 100 ohm at ±5 V, low-voltage operation, and pin compatibility with established multiplexers. The inhibit pin simplifies system control because all signal paths can be disconnected simultaneously. TTL and CMOS-compatible address and select inputs also support a broad range of digital control circuits without requiring elevated input levels.

Internally, the device uses controlled analog switches to route one selected input to the common output. Its on-resistance matching between channels keeps similar resistance characteristics across the selected paths, helping preserve signal amplitude consistency. Because it is a passive switch rather than an active amplifier, it introduces insertion loss determined principally by on-resistance and does not provide gain or level shifting.

Typical applications include battery-powered instrumentation, automated test equipment, data acquisition, communication routing, sample-and-hold systems, and microcontroller-based sensor interfaces. The low +2 V minimum supply is useful for portable equipment, while dual-supply operation is valuable when signals can be bipolar. The 16-pin SOIC package also supports conventional surface-mount assembly and board-level manual inspection.

Designers should verify signal amplitude, bandwidth, injection charge, off leakage, and the complete logic truth table against the manufacturer datasheet. Keep high-impedance routing paths short, provide a stable ground reference, and account for the resistance of PCB traces when precision measurements depend on total path resistance.

This page combines the manufacturer device description with a focused engineering comparison, replacement guidance, pin-level sourcing information, and practical application guidance for engineers evaluating the ISL84051IB in multiplexed analog signal paths.

بدائل مباشرة لـ ISL84051IB — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

ISL84051IBZ

✅ بديل مباشر
📦 16-pin SOIC
Same 8:1 configuration with a 0-channel-count difference; ordering suffix IBZ requires package, termination, and temperature verification

📋 بديل مرجعي (غير موجود في الكتالوج)

MAX4051

✅ بديل مباشر
📦 16-pin SOIC
Same 8:1 configuration and 16-pin count; ISL84051IB specifies 100 ohm maximum on-resistance at ±5 V

📋 بديل مرجعي (غير موجود في الكتالوج)

MAX4051A

✅ بديل مباشر
📦 16-pin SOIC
Same 8:1 configuration and 16-pin count; the Renesas family datasheet identifies it as a drop-in replacement

📋 بديل مرجعي (غير موجود في الكتالوج)

MAX4581

✅ بديل مباشر
📦 16-pin SOIC
Same 8:1 configuration and 16-pin count; the Renesas family datasheet identifies pin compatibility

📋 بديل مرجعي (غير موجود في الكتالوج)

74HC4051

✅ بديل مباشر
📦 16-pin SOIC
Same 8:1 configuration and 16-pin count; the Renesas family datasheet identifies industry-standard 74HC4051 pin compatibility

📋 بديل مرجعي (غير موجود في الكتالوج)

ISL84051IB المواصفات

Multiplexer Configuration 8:1
Number of Circuits 1 circuit
On-Resistance 100 ohm maximum at ±5 V
Single-Supply Voltage Range +2 V to +12 V
Dual-Supply Operation Supported
Control Input Compatibility TTL and CMOS
Inhibit Function Simultaneously opens all signal paths
العلبة 16-pin SOIC
نوع التركيب Surface mount

دليل تكوين أطراف ISL84051IB 16-pin soic

تكوين الأطراف لـ ISL84051IB (حزمة 16-pin soic). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 16-pin soic لـ ISL84051IB

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ISL84051IB.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ISL84051IB مناسب لـ 6 التطبيقs: Battery-Powered Sensor Multiplexing, Automated Test Equipment, Data Acquisition Systems, Communication Signal Routing, Sample-and-Hold Systems, Programmable Instrument Control.

📱

Battery-Powered Sensor Multiplexing

The ISL84051IB fits portable sensor systems that need to monitor multiple inputs without allocating a separate converter channel to each sensor. Its +2 V to +12 V single-supply range accommodates low-energy rails, while the 8:1 configuration reduces external routing requirements. TTL and CMOS-compatible control inputs allow a microcontroller to select channels directly. The manufacturer specifies a maximum on-resistance of 100 ohm at ±5 V, which should be included in the sensor-loading calculation for high-impedance sources. The inhibit function can disconnect all paths during idle periods or measurement resets.

🏭

Automated Test Equipment

The ISL84051IB can route one of eight test points to a shared measurement front end in automated test equipment. Its 100 ohm maximum on-resistance at ±5 V provides a defined basis for insertion-loss budgeting, and the common inhibit input supports safe isolation between measurement phases. The 16-pin SOIC package simplifies assembly on test fixture and instrument control boards. Engineers should verify bandwidth, switching time, leakage, and charge injection against the signal amplitude and source impedance, especially for sub-nanovolt or high-gain measurements.

🖥️

Data Acquisition Systems

The ISL84051IB is suitable for multiplexing resistive, voltage, and low-level sensor inputs into a shared data-acquisition channel. Its 8:1 organization reduces converter inputs, while the inhibit pin can provide deliberate isolation during channel settling or calibration. With a maximum on-resistance of 100 ohm at ±5 V, total path resistance must be added to the sensor's effective output impedance for accuracy analysis. The low-voltage single-supply capability also helps reduce the complexity of portable acquisition systems. Keep routed traces short, provide solid grounding, and account for PCB leakage at the required measurement bandwidth.

🌐

Communication Signal Routing

The ISL84051IB can select among eight communication-related paths when a board must route one source to a shared receiver, monitoring point, or test port. Its TTL and CMOS-compatible selection inputs simplify interfacing with common digital controllers, and the simultaneous inhibit function helps prevent unintended signal propagation. The device does not amplify or level-shift signals, so insertion loss and off-channel behavior remain important. For high-frequency links, verify the specified bandwidth, on-resistance flatness, capacitance, and switching speed before using it near the data-rate limit.

🔧

Sample-and-Hold Systems

The ISL84051IB can select one of eight sampled inputs for a sample-and-hold or comparator front end when the source count exceeds the available analog inputs. The 8:1 organization concentrates switching in one package, while the inhibit input allows all paths to open during acquisition or reset intervals. The 100 ohm maximum on-resistance at ±5 V adds to the charging resistance presented to the selected source, affecting acquisition time. Confirm charge injection, switch capacitance, leakage, and off isolation from the manufacturer datasheet before using the multiplexer in precision settling-sensitive circuits.

🔬

Programmable Instrument Control

The ISL84051IB fits programmable instrument and interface boards that must connect one of eight external or internal nodes to a common control or measurement circuit. Its low-voltage operation allows the multiplexer to share a compact digital control domain, while TTL and CMOS-compatible inputs broaden controller compatibility. The inhibit function can support deterministic isolation during calibration or relay transition periods. Because the SOIC package exposes sensitive analog pins, use a quiet ground plane, minimize long traces, and place protection components where they will not materially degrade switch capacitance or leakage.

ملخص المنتجات الموصى بها

74HC4051 Pin-compatible 8:1 multiplexer option يُستخدم في: Battery-Powered Sensor Multiplexing, Data Acquisition Systems, Sample-and-Hold Systems MAX4051 Documented drop-in 8:1 alternative يُستخدم في: Battery-Powered Sensor Multiplexing, Data Acquisition Systems, Sample-and-Hold Systems MAX4051A Documented drop-in 8:1 alternative يُستخدم في: Automated Test Equipment, Communication Signal Routing, Programmable Instrument Control MAX4581 Pin-compatible 8:1 multiplexer option يُستخدم في: Automated Test Equipment, Communication Signal Routing, Programmable Instrument Control
What is the ISL84051IB?
The ISL84051IB is a low-voltage 8:1 analog multiplexer with a maximum on-resistance of 100 ohm at ±5 V, supplied in a 16-pin SOIC package. According to the Renesas ISL84051, ISL84052, and ISL84053 datasheet, it supports single-supply operation from +2 V to +12 V, dual-supply operation, TTL and CMOS-compatible control inputs, and an inhibit input that opens all signal paths simultaneously. It is intended for routing one of eight analog inputs to a common output in instrumentation, data-acquisition, test, and embedded control systems.
What are the key specifications of ISL84051IB that engineers should know?
The ISL84051IB combines an 8:1 configuration, 100 ohm maximum on-resistance at ±5 V, and operation from +2 V to +12 V in a 16-pin SOIC package. The Renesas device family datasheet also identifies TTL and CMOS-compatible controls and a simultaneous inhibit function. These parameters make the device relevant to multiplexed sensor inputs, automated test systems, and communication routing. Bandwidth, charge injection, leakage, switching time, and complete operating-temperature limits should be confirmed from the corresponding electrical characteristics before final design release.
How does the ISL84051IB route analog signals?
The ISL84051IB uses three address inputs and one select input to connect one of eight analog inputs to the common output. When the inhibit input is asserted, all signal paths open simultaneously. According to the Renesas ISL84051, ISL84052, and ISL84053 datasheet, the device is implemented with low-voltage analog switches rather than an active amplifier, so it does not provide gain. Signal attenuation is therefore governed primarily by the switch on-resistance and the resistance of the external signal path.
Can the ISL84051IB operate from a single 3.3 V supply?
Yes, the ISL84051IB supports low-voltage single-supply operation from +2 V to +12 V, so a regulated +3.3 V rail falls within the stated operating range. The Renesas ISL84051, ISL84052, and ISL84053 datasheet identifies the device as a low-voltage multiplexer with TTL and CMOS-compatible control inputs. The selected input voltage must remain within the limits of the individual channel and the supply rails, and the circuit should include adequate bypassing to preserve switching performance and minimize supply disturbance.
Is ISL84051IB pin compatible with MAX4051?
Yes, the Renesas ISL84051 family is identified as a drop-in replacement for the MAX4051 and MAX4051A, with the same 8:1 channel organization. Both the ISL84051IB and the MAX4051-family parts use a 16-pin SOIC footprint, giving them a 0-pin-count difference and the same 8:1 configuration. The Renesas ISL84051, ISL84052, and ISL84053 datasheet also identifies compatibility with MAX4581 and the industry-standard 74HC4051, although system-specific logic levels, voltage limits, and timing should still be checked.
What is the difference between ISL84051IB and MAX4051A?
The ISL84051IB and MAX4051A are both 8:1, 16-pin SOIC multiplexers intended as drop-in alternatives, giving them a 0-channel-count difference and the same package pin count. The ISL84051 family datasheet specifies 100 ohm maximum on-resistance at ±5 V, while a complete comparative timing, leakage, and logic-threshold table is required for final substitution approval. The ISL84051IB additionally supports operation from +2 V to +12 V, making it suitable for low-voltage systems when the control and signal levels meet its operating limits.
IS ISL84051IB the same as ISL84051IBZ?
The ISL84051IB and ISL84051IBZ represent closely related versions of the 8:1 multiplexer, with a 0-channel-count difference and the same core switching function. A published comparison identifies their functional characteristics as consistent but cautions that a replacement should be checked against the datasheet. The ordering suffix can distinguish termination or packaging details, so engineers should verify the package drawing, pin configuration, temperature range, and lifecycle status before treating one exact MPN as interchangeable with the other.
What can replace ISL84051IB?
The MAX4051, MAX4051A, MAX4581, and 74HC4051 are documented 8:1 alternatives with the same 16-pin SOIC footprint, while ISL84051IBZ is a closely related ordering option. The Renesas ISL84051 family datasheet explicitly identifies drop-in or pin-compatible relationships with these devices. A replacement should still be checked for supply-voltage range, control thresholds, on-resistance, switching speed, leakage, channel configuration, and inhibit behavior. All candidates must match the 16-pin pinout rather than merely the 8:1 function.
What is the best Maxim Integrated equivalent for ISL84051IB?
The MAX4051 and MAX4051A are the most directly documented Maxim Integrated equivalents because the Renesas family datasheet identifies them as drop-in replacements for the 8:1 configuration and both use 16-pin SOIC packages. The channel organization differs by zero, eliminating a multiplexing-count mismatch. MAX4581 is another pin-compatible alternative named by the manufacturer, but its individual electrical ratings should be reviewed separately. Verify the selected replacement against the original board's logic levels, supply rails, and signal-frequency requirements.
When should I choose ISL84051IB over 74HC4051?
Choose the ISL84051IB when a system needs a low-voltage 8:1 multiplexer with a documented 100 ohm maximum on-resistance at ±5 V, TTL and CMOS-compatible controls, and a common inhibit function. The 74HC4051 is a pin-compatible industry-standard alternative for designs whose logic family and exact electrical ratings already match the existing board. The decision should be based on supply range, switching timing, charge injection, leakage, and verified logic thresholds rather than the shared 8:1, 16-pin SOIC organization alone.
Is ISL84051IB suitable for battery-powered sensor measurement?
The ISL84051IB is suitable for many battery-powered sensor measurement systems because it supports single-supply operation from +2 V to +12 V and uses TTL and CMOS-compatible control inputs. Its 8:1 organization lets one measurement channel monitor multiple sensors, while the inhibit input provides a way to isolate all paths simultaneously. The Renesas device family datasheet confirms the low-voltage architecture and 100 ohm on-resistance rating. At higher frequencies, confirm bandwidth, charge injection, leakage, and the impedance of the selected sensor before committing to the design.
Where can I download the ISL84051IB datasheet PDF?
The official Renesas document page for the ISL84051, ISL84052, and ISL84053 family provides the manufacturer datasheet covering ISL84051IB. The document identifies the device as a low-voltage, single- or dual-supply 8-to-1 multiplexer with a 100 ohm on-resistance specification. Use that document for the authoritative pin description, truth table, electrical characteristics, package drawing, and ordering information. The digi-electronics PDF URL in the source list is a mirror and should be checked against the manufacturer version before design release.
Where can I find the ISL84051IB pinout?
The ISL84051IB pinout is found in the pin-description and pin-configuration sections of the Renesas ISL84051, ISL84052, and ISL84053 datasheet. The device is packaged as a 16-pin SOIC, but a complete numbered pin table is not reproduced on this page. Use the manufacturer drawing when assigning address, select, inhibit, supply, ground, common-output, and channel-input PCB nets. Because this is a multiplexed analog switch, accidental input-to-output shorts or unused-channel handling should be reviewed against the device truth table.
Does the ISL84051IB have an inhibit pin?
Yes, the ISL84051 family includes an inhibit pin that can simultaneously open all signal paths. This feature is particularly useful during measurement settling, isolation intervals, reset sequences, and power-state transitions because the shared output can be disconnected from every channel at once. The Renesas ISL84051, ISL84052, and ISL84053 datasheet identifies the inhibit function as a family-level feature. Check its active level and timing values in the electrical-characteristics table when defining system control logic.
Where can I buy ISL84051IB and check current availability?
Current ISL84051IB availability and order requirements can be requested through the Request a Quote form on this page. The part is identified as a Renesas Electronics 8:1 analog multiplexer in a 16-pin SOIC package, and current distributor listings indicate market availability. For a production design, specify the exact ISL84051IB ordering code, confirm the required package and termination, request current lead time, and validate stock before releasing the manufacturing bill of materials.

بيانات مرجعية هندسية لـ ISL84051IB — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the ISL84051IB when a new low-voltage design needs an 8:1 multiplexer with operation from +2 V to +12 V, TTL and CMOS-compatible controls, a 100 ohm maximum on-resistance at ±5 V, and a common inhibit input. Choose ISL84051IBZ when that ordering suffix is the approved configuration for the target manufacturing or termination process. MAX4051 and MAX4051A are appropriate drop-in choices when their individual electrical characteristics match the design and the manufacturer-assigned sourcing conditions are preferable. MAX4581 is another pin-compatible option, while 74HC4051 is useful when the board is intentionally standardized around the 74HC logic family. In every case, verify the 16-pin mapping, inactive-channel behavior, control thresholds, leakage, charge injection, bandwidth, and lifecycle status rather than relying only on the shared 8:1 configuration.

المقارنة مع البدائل

المعامل هذا المنتج ISL84051IBZ MAX4051 MAX4051A MAX4581 74HC4051
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Brand Renesas Electronics Renesas Electronics Maxim Integrated Maxim Integrated Maxim Integrated Texas Instruments
Multiplexer Configuration 8:1 8:1 8:1 8:1 8:1 8:1
Number of Pins 16 pins 16 pins 16 pins 16 pins 16 pins 16 pins

أبرز الفروقات

  • Low-voltage 8:1 multiplexing in the same 16-pin footprint (مقابل74HC4051)
  • Documented drop-in relationship with an established Maxim family (مقابلMAX4051)
  • Common inhibit control for simultaneous path isolation (مقابلMAX4581)

ملاحظات التصميم

Include the 100 ohm maximum switch on-resistance in the complete source-impedance calculation at ±5 V. Add connector resistance, protection-device resistance, and PCB trace resistance to determine the actual attenuation seen by the downstream receiver. For high-impedance sensors, use short traces, a low-leakage protection network, and a grounded guard where practical. These precautions are especially important because a passive multiplexer cannot correct amplitude errors introduced by its finite path resistance.

Place the ISL84051IB close to the common analog output and the routed signal sources. Keep channel traces short, avoid sharing sensitive paths with high-current return currents, and provide a continuous ground reference beneath the analog section. The inhibit and address traces should be routed away from sensitive switching nodes where practical. Confirm that exposed SOIC leads have adequate solder-joint fillet formation and that copper thermal and current paths match the assembly process.

Do not select a replacement solely because it is labeled an 8:1 multiplexer. Verify the complete 16-pin map, select logic, inhibit polarity, supply range, control thresholds, on-resistance, leakage, bandwidth, and switching timing. The ISL84051 family datasheet documents compatibility with MAX4051, MAX4051A, MAX4581, and 74HC4051, but existing boards may also contain peripheral circuitry that assumes the original device's inactive-state behavior. Preserve the selected channel only after the system-level truth table is checked.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The manufacturer device description and the listed distributor pages do not provide a complete component-level compliance declaration for this ordering code. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with the manufacturer before release.

تم التحقق من البيانات في: 2026-11-10 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ISL84051IB datasheet ISL84051IB pinout ISL84051IB datasheet pdf ISL84051IB equivalent ISL84051IB replacement ISL84051IB cross reference ISL84051IB vs MAX4051 ISL84051IB footprint Renesas ISL84051IB ISL84051IB 16-SOIC multiplexer ISL84051IB application circuit ISL84051IB price ISL84051IB stock

المكونات والمصطلحات ذات الصلة

Renesas Electronics Intersil ISL84051IB ISL84051 ISL84051IBZ MAX4051 MAX4051A MAX4581 74HC4051 analog multiplexer analog switch multiplexer interface IC semiconductor 8:1 multiplexer 16-pin SOIC SOIC package family surface-mount package on-resistance TTL CMOS dual-supply operation single-supply operation inhibit pin signal routing
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر