ISL84762IR - 600mOhm Dual SPDT Analog Switch | Renesas
MPN: ISL84762IR ✓ نشطISL84762IR نظرة عامة
An analog switch is an integrated semiconductor that routes signals between circuit paths under digital control. The SPDT, or single-pole double-throw, topology connects one common terminal to one of two selectable terminals. A dual SPDT switch contains two such networks, allowing one component to control two independent signal paths. Within the broader interface-IC hierarchy, analog switches sit between sensors, test equipment, communication circuitry, and mixed-signal processors.
The ISL84762IR combines a 600 mOhm on-resistance with a low-voltage, single-supply design. Its 2:1 configuration supports two separately switched channels, while the 10-TDFN (3 x 3 mm) package limits board area in space-constrained equipment. The surface-mount construction and square HVSON package code suit automated assembly. The manufacturer datasheet should be consulted for logic levels, voltage limits, channel resistance matching, leakage, and switching-time details before final circuit selection.
Internally, the device uses active transistor switching networks to control analog-signal paths while control inputs determine the selected branch. Because switch performance depends on voltage, current, and logic thresholds, the external system must maintain the supply and control-input conditions specified by the manufacturer. The package's exposed thermal and electrical construction also requires attention to PCB layout, grounding, and the datasheet land pattern to achieve predictable behavior.
Typical uses include signal multiplexing in measurement systems, routing between analog sensors and processing circuitry, portable test equipment, communication interfaces, and industrial control modules. The dual-channel organization can reduce the number of discrete routing components when a board must select two signals independently. It is especially useful when board area is more constrained than the number of available control pins.
The primary design consideration is preserving signal integrity around the switched nodes. Route sensitive analog traces away from high-current switching paths, use the manufacturer's reference land pattern, and connect decoupling and return paths consistently. Before production release, confirm the exact supply range, control logic, maximum switched voltage, and electrical limits against the current Renesas datasheet.
This page combines the exact ISL84762IR configuration with application guidance, verified drop-in references, package information, and practical PCB considerations. It is designed to help engineers determine whether the dual SPDT topology, 600 mOhm on-resistance, and compact 3 x 3 mm footprint satisfy the routing and board-space requirements of a new design.
بدائل مباشرة لـ ISL84762IR — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع ISL84762IR (نفس عامل الشكل والبصمة) — يختلف في Package, Switch Configuration.
ISL84762IRZ
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
ISL84762IU
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←ISL84762IUZ
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
ISL84762IR الحدود القصوى والخصائص الكهربائية
| Switch Configuration | 2:1 SPDT |
| Number of Circuits | 2 circuits |
| On-Resistance | 600 mOhm |
| Supply Type | Single supply |
| Voltage Class | Low voltage |
| On-Resistance Class | Ultra-low on-resistance |
| العلبة | 10-TDFN (3 x 3 mm) |
| Package Code | HVSON |
| Package Shape | Square |
| Number of Terminals | 10 terminals |
| نوع التركيب | Surface mount |
| Temperature Grade | Industrial |
| Number of Independently Switched Channels | 2 channels |
دليل تكوين أطراف ISL84762IR square
تكوين الأطراف لـ ISL84762IR (حزمة square). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ISL84762IR.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
ISL84762IR مناسب لـ 6 التطبيقs: Analog Signal Multiplexing, Industrial Sensor Interface, Portable Test and Measurement, Communication Interface Routing, Audio Signal Path Selection, Embedded Control Module.
Analog Signal Multiplexing
The ISL84762IR is suitable for multiplexing two low-voltage analog signals through independent 2:1 paths. Its dual SPDT organization allows one common node per channel to be connected to either selectable terminal, reducing the component count compared with two separate single switches. The 600 mOhm on-resistance helps limit signal degradation during routing. Use the 10-terminal TDFN footprint to conserve board area, and verify the maximum signal amplitude and operating supply against the Renesas datasheet before implementation.
Industrial Sensor Interface
The ISL84762IR can route signals from industrial sensors toward a controller or measurement channel while remaining within a compact surface-mount footprint. Two independent 2:1 circuits support source selection, range selection, or redundant signal routing. Its 600 mOhm on-resistance is useful for low-voltage sensor signals, while the industrial temperature-grade designation suits equipment intended for controlled industrial environments. The PCB should follow the manufacturer's recommended land pattern and keep sensitive analog traces away from noisy switching paths.
Portable Test and Measurement
In portable test equipment, the ISL84762IR can perform signal-path selection in a small 3 x 3 mm TDFN package. Its two SPDT channels can select between inputs, test points, or calibration paths without requiring multiple discrete switch packages. The stated 600 mOhm on-resistance supports low-loss routing, although insertion loss, bandwidth, leakage, and switch timing must be checked for the required measurement range. Careful grounding and short analog traces help preserve measurement accuracy.
Communication Interface Routing
The ISL84762IR is applicable to low-voltage communication-interface routing where compact dual-channel selection is needed. Its two independently controlled 2:1 networks can connect a transceiver or controller-facing node to alternate signal paths while limiting board area. The single-supply, low-voltage architecture aligns with many embedded interface systems, and the 600 mOhm on-resistance minimizes resistive loss. Confirm logic thresholds, allowable signal swing, and switching transients in the manufacturer datasheet for the specific interface standard.
Audio Signal Path Selection
The ISL84762IR can select between two low-level audio paths when board space is limited and the switch's voltage and bandwidth ratings meet the signal requirements. Its dual SPDT structure provides two routing channels, while the 600 mOhm on-resistance reduces avoidable insertion loss in the selected branch. Because audio designs are sensitive to ground offsets and switching noise, use a quiet supply reference, follow the exposed-pad layout, and keep the analog return path continuous. Verify maximum signal amplitude before selecting the device.
Embedded Control Module
The ISL84762IR fits embedded modules that need to route two controlled analog signals close to an ADC, comparator, or sensor front end. Its compact 10-terminal TDFN package reduces placement overhead, while the two independent SPDT channels support multiplexing and local signal isolation. The 600 mOhm on-resistance provides a defined low-resistance path, but engineers should check leakage, bandwidth, and logic levels for their particular ADC or sensor interface. Use the manufacturer's land pattern and thermal-via guidance during layout.
بيانات مرجعية هندسية لـ ISL84762IR — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | ISL84762IRZ | ISL84762IU | ISL84762IUZ |
|---|---|---|---|---|
| Package | 10-TDFN (3 x 3 mm) | 10-TDFN (3 x 3 mm) - same | 10-TDFN (3 x 3 mm) - same | 10-TDFN (3 x 3 mm) - same |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| On-Resistance | 600 mOhm | 600 mOhm | 600 mOhm | 600 mOhm |
| Number of Terminals | 10 terminals | 10 terminals | 10 terminals | 10 terminals |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount |
أبرز الفروقات
- Combines two independently selectable analog paths in one compact package (مقابلISL84762IRZ)
- Industrial-grade dual SPDT switching function (مقابلISL84762IU)
- Low 600 mOhm switched-path resistance (مقابلISL84762IUZ)
ملاحظات التصميم
Use the Renesas recommended 10-TDFN land pattern and its exposed-pad connection exactly. Place the switch near the routed analog nodes to minimize trace capacitance and susceptibility to coupled noise. Keep the common and selectable nodes on the same ground reference, and avoid placing high-speed digital routing beneath sensitive switched nodes.
The stated 600 mOhm on-resistance should be considered together with leakage, off-isolation, capacitance, and bandwidth. For low-amplitude signals, verify that the switch capacitance does not distort the intended operating band. Keep analog traces short, provide a continuous return path, and use controlled-impedance routing if the selected signal has a defined high-speed edge rate.
Do not assume that the ISL84762IR, ISL84762IRZ, ISL84762IU, and ISL84762IUZ suffixes are interchangeable without checking ordering and temperature requirements. Also confirm the maximum switched voltage, supply range, control-input thresholds, and allowed current against the manufacturer datasheet. Operating beyond a rail limit can damage an analog switch even when its on-resistance appears acceptable.
Provide the single supply specified by the Renesas datasheet and decouple it near the device according to the recommended application circuit. Ensure that control inputs remain within their valid logic levels during power transitions. The analog switch itself has a low-resistance switched path, but external pull resistors, source impedance, and supply noise determine the usable signal performance.
معلومات الامتثال
The listed industrial temperature grade does not by itself establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Automotive qualification is not applicable to the identified industrial-grade ordering configuration.