ISL84684IR - Dual 2:1 Analog Switch, 500mOhm | Renesas
MPN: ISL84684IR ✓ نشطISL84684IR نظرة عامة
An analog switch is an interface IC that connects or disconnects signal paths under digital control. In the broader semiconductor hierarchy, it belongs to the switch and multiplexer family within interface ICs. Each SPDT circuit can route one common terminal to one of two switched terminals, allowing a controller to select among sensors, amplifiers, filters, converters, or other signal sources without changing the external board layout.
The ISL84684IR combines a 500mOhm on-resistance with 27ns switching time, helping preserve signal integrity when the switched nodes operate at moderate or low frequencies. Its 50ns break time supports fast control transitions. The 4nA leakage specification is particularly relevant to high-impedance analog nodes, where leakage can create offset errors, unwanted loading, or errors in downstream measurement circuits.
The device uses a 10-TDFN surface-mount package with dimensions of 3 x 3 mm. Its compact footprint is useful in portable instruments, test systems, communication equipment, and mixed-signal products where routing density matters. The dual-circuit configuration also lets one package control two related switch paths, reducing component count compared with separate single switches where board area is constrained.
Typical applications include audio path routing, sensor selection, test-and-measurement signal control, communications equipment, and industrial interface modules. Two switch sections can be used for complementary routing, isolation between functional blocks, or redundant paths. Designers should still verify signal levels, control-logic compatibility, leakage effects, and switching transients against the application’s operating conditions.
The principal design consideration is ensuring that the driven signal remains within the switch’s electrical limits while control transitions do not inject unacceptable disturbance into sensitive downstream circuitry. Keep routing short, use a stable ground reference, and place appropriate bypass capacitance near the supply pins. Confirm the complete pin configuration and exposed-pad connection directly from the manufacturer datasheet before fabrication.
This page combines package, switching, leakage, sourcing, pinout-location, drop-in replacement, and application guidance for engineers evaluating the ISL84684IR. It also identifies the confirmed same-package alternatives and highlights the trade-offs involved when changing vendors or selecting related switch configurations.
بدائل مباشرة لـ ISL84684IR — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
ISL84684IRZ
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
FSA2257L10X
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
ISL84684IR الحدود القصوى والخصائص الكهربائية
| Number of Switch Circuits | 2 circuits |
| Switch Configuration | 2:1 SPDT per circuit |
| On-Resistance | 500mOhm |
| Switching Time | 27ns |
| Break Time | 50ns |
| Leakage Current | 4nA |
| تيار التغذية | 40nA |
| العلبة | 10-TDFN (3 x 3 mm) |
| عدد الدبابيس | 10 pins |
| نوع التركيب | Surface mount |
| Number of Switches | 2 switches |
| Product Type | Analog switch |
دليل تكوين أطراف ISL84684IR 10-tdfn (3 x 3 mm)
تكوين الأطراف لـ ISL84684IR (حزمة 10-tdfn (3 x 3 mm)). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ISL84684IR.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
ISL84684IR مناسب لـ 6 التطبيقs: Sensor Signal Routing, Test and Measurement Signal Control, Audio Signal Selection, Communications Interface Routing, Industrial Control Signal Multiplexing, Portable and Wearable Signal Control.
Sensor Signal Routing
The ISL84684IR can select between two sensor outputs while preserving a compact board footprint. Its two 2:1 switch sections provide a straightforward way to route a common measurement channel toward one of two inputs, and its 500mOhm on-resistance keeps channel resistance low relative to many high-impedance sensing paths. The 4nA leakage characteristic is also useful when the selected sensor has a high output impedance, because leakage current can produce offset error. Before committing the layout, verify the sensor signal range, supply limits, control thresholds, and whether the exposed pad must be connected to ground. Keep sensitive sensor traces away from control lines and use a quiet ground reference for accurate measurements.
موصى به
Test and Measurement Signal Control
The ISL84684IR suits test-and-measurement systems that must route a common input to one of two sources or destinations. Its 27ns switching time provides rapid control response, while the 50ns break time helps define the transition behavior of the selected path. The low 4nA leakage can reduce bias errors when the switch is placed next to high-impedance instrumentation. A dual section can control complementary or related routes without requiring two separate packages. Engineers should still calculate insertion loss, bandwidth, and off-channel behavior from the complete datasheet characteristics. Place the device close to the controlled nodes and provide a low-impedance ground return to minimize sensitivity to external pickup.
موصى به
Audio Signal Selection
The ISL84684IR can select between two audio paths when the signals remain within the device’s supported voltage and frequency limits. Its 500mOhm on-resistance provides a defined connection resistance, and the compact 10-TDFN package leaves more board area for analog stages, connectors, and filtering networks. For low-level audio nodes, the 4nA leakage specification helps limit additional bias current at the switched output. Evaluate channel-to-channel matching, off-isolation, bandwidth, and distortion-related characteristics in the manufacturer datasheet before finalizing the design. Place the switch away from high-current return paths and connect the exposed pad according to the package guidance to maintain predictable thermal and grounding behavior.
موصى به
Communications Interface Routing
The ISL84684IR provides compact 2:1 routing for moderate-speed communication and control interfaces. Its 27ns switching time allows the control system to change paths quickly, while the two independent switch circuits can support transmit, receive, or complementary routing functions. Because the device is classified as an analog switch rather than a guaranteed high-speed differential multiplexer, designers must confirm bandwidth, insertion loss, off-isolation, and signal-integrity margins against the interface specification. Use short, controlled-impedance routing where applicable, keep the ground connection short, and validate the exposed-pad layout. A Renesas cross-reference review is appropriate before assigning this part to a new communications footprint.
موصى به
Industrial Control Signal Multiplexing
The ISL84684IR can multiplex low-level control signals in a compact industrial module. Two 2:1 sections allow a controller to choose between two command or feedback paths while retaining a small 3 x 3 mm footprint. The 500mOhm on-resistance limits the resistive drop in the selected path, and the 4nA leakage helps when returning signals are weakly driven. Industrial systems must also account for supply transients, temperature range, isolation rules, and the logic levels used to control the switches. Validate those conditions against the datasheet because package dimensions alone do not establish industrial suitability. Maintain a continuous ground reference and consider the exposed pad when planning copper and thermal conditions.
موصى به
Portable and Wearable Signal Control
The ISL84684IR is useful in space-constrained portable equipment where two compact signal switches can replace larger discrete routing arrangements. The 10-TDFN package occupies only 3 x 3 mm, while the 40nA supply current is consistent with low-power design goals. The 4nA leakage can be important when the switch connects to sensor or electrode nodes with high source impedance. Actual battery-life impact should be calculated from standby leakage, control activity, and the switched-node biasing because the device’s own supply current is only part of the system budget. Review the complete pin configuration and exposed-pad requirements before layout, and keep the switch away from noisy boost-converter and display-driver regions.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ ISL84684IR — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | ISL84684IRZ | FSA2257L10X |
|---|---|---|---|
| Package | 10-TDFN (3 x 3 mm) | TDFN - same package | TDFN-10 - same package |
| Brand | Renesas Electronics | Renesas Electronics | onsemi |
| Number of Pins | 10 pins | 10 pins | 10 pins |
أبرز الفروقات
- Dual 2:1 routing in a compact package (مقابلFSA2257L10X)
- Defined low on-resistance for compact analog routing (مقابلFSA2257L10X)
- Fast 27ns switching behavior (مقابلFSA2257L10X)
ملاحظات التصميم
Route each switched signal directly to its destination and keep the analog-signal traces short and away from the control inputs. The 10-TDFN package requires close attention to its exposed pad; use the manufacturer land pattern and verify whether the pad is connected, floated, or tied to ground according to the datasheet. Place local bypass capacitance near the supply and ground pins, and provide a continuous ground return for both switch sections.
Calculate the maximum voltage drop in the conducting path as I x 500mOhm, then compare that drop with the receiving circuit’s noise margin or accuracy requirement. For high-impedance nodes, include the 4nA leakage current when estimating bias error and confirm that the node remains within the supported common-mode range. Off-isolation and bandwidth must be checked against the source impedance and operating frequency.
Do not treat the 3 x 3 mm TDFN footprint alone as proof of drop-in compatibility. Compare signal-pin assignments, control thresholds, supply range, exposed-pad requirements, and timing characteristics between the original and replacement. The ISL84684IRZ is a strong suffix-family candidate, while a cross-brand replacement still requires a complete electrical and pin-function review before schematic or layout release.
معلومات الامتثال
Compliance status is not stated in the cited component records. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification requirements from the current manufacturer product documentation.