Microchip Technology

KSZ8091RNBCA - 10/100 Ethernet PHY | Microchip Technology

MPN: KSZ8091RNBCA ✓ نشط
Single supply Vdss 32-QFN, 5 x 5 mm Package
الحد الأدنى للطلب: 1 |

KSZ8091RNBCA نظرة عامة

The Microchip Technology KSZ8091RNBCA is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver with Full MII and RMII support, supplied in a 32-QFN 5 x 5 mm package. It integrates the circuitry required to transmit and receive Ethernet data over standard CAT-5 unshielded twisted-pair cable, including Wake-on-LAN and LinkMD cable-diagnostics functions.

An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts digital data from a network controller into signals suitable for twisted-pair cabling and converts received cable signals back into digital data. Within the network interface hierarchy, the KSZ8091 sits between an Ethernet MAC or embedded processor and the physical cable. Its highly integrated PHY implementation reduces board space, external-component count, and the design effort required for a 10/100 Ethernet connection.

The device supports both 10 Mbps and 100 Mbps Ethernet operation and offers Full MII and RMII host interfaces. Full MII provides a wider parallel interface for systems designed around dedicated parallel bus signals, while RMII reduces the number of host-side interface signals for more compact embedded designs. Wake-on-LAN support allows the network system to detect remote activity, and LinkMD provides diagnostic functions for identifying common cable faults and simplifying network troubleshooting.

The KSZ8091RNBCA is packaged in a compact 32-QFN package measuring 5 x 5 mm. This surface-mount format is suitable for space-constrained embedded equipment and provides a direct connection between the PHY, magnetics, and host interface circuitry. Because the package has fine-pitch leads and a thermal pad, assembly requires a controlled land pattern, stencil design, and reflow profile. Signal-integrity and layout decisions should follow the pin assignment, recommended application circuit, and decoupling guidance in the manufacturer datasheet.

Typical uses include industrial Ethernet controllers, embedded control systems, set-top equipment, printers, network appliances, and consumer products that require a wired 10/100 connection. In these systems, the KSZ8091 can be paired with an Ethernet magnetics component and a host controller with either MII or RMII support. Its diagnostic features are especially useful in products installed remotely or in maintenance-intensive industrial environments.

When assigning PCB resources, prioritize an uninterrupted ground plane, short high-speed signal connections, correct impedance-controlled differential pairs, and proper isolation between the digital PHY and analog copper-side circuitry. Follow the manufacturer datasheet for the supported RMII or MII configuration, reference termination, crystal requirements, magnetic-device selection, and decoupling values. Confirm every unused signal state and verify timing margin at the intended system clock.

This page combines manufacturer feature information with package, sourcing, replacement, and design guidance. It also highlights the practical trade-offs among available same-footprint options so engineers can select the correct ordering code and plan PCB assembly without changing the Ethernet PHY architecture.

بدائل مباشرة لـ KSZ8091RNBCA — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

KSZ8091RNBCA-TR

✅ بديل مباشر
📦 32-QFN (5x5)
Same KSZ8091RNBCA electrical configuration and 32-QFN footprint; ordering code changes to tape-and-reel production packing, with 0% functional parameter difference

📋 بديل مرجعي (غير موجود في الكتالوج)

KSZ8091RNBCA المواصفات

Product Type 10/100 Ethernet physical-layer transceiver (PHY)
Supported Ethernet Rates 10 Mbps and 100 Mbps
Host Interface Full MII and RMII
Cable Support CAT-5 unshielded twisted-pair cable
Supply Architecture Single supply
العلبة 32-QFN, 5 x 5 mm
نوع التركيب Surface mount
Wake-on-LAN Support Supported
Cable Diagnostics LinkMD cable diagnostics
Energy-Efficient Ethernet EEE
حالة RoHS Compliant

دليل تكوين أطراف KSZ8091RNBCA 32-qfn, 5 x 5 mm

تكوين الأطراف لـ KSZ8091RNBCA (حزمة 32-qfn, 5 x 5 mm). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 32-qfn, 5 x 5 mm لـ KSZ8091RNBCA

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ KSZ8091RNBCA.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

KSZ8091RNBCA مناسب لـ 6 التطبيقs: Industrial Embedded Ethernet, Network Printers, Set-Top and Network Appliances, Internet of Things Gateways, Test and Measurement Equipment, Network Security Appliances.

🏭

Industrial Embedded Ethernet

The KSZ8091RNBCA fits industrial embedded controllers that require a compact 10/100-Mbps wired-network connection. It sits between the host processor and an Ethernet magnetic component, supporting Full MII or RMII according to the host interface design. Full MII provides dedicated parallel signals for systems with established timing, while RMII can simplify routing on space-constrained boards. Wake-on-LAN supports remote activation, and LinkMD assists maintenance teams with cable diagnostics. The 32-QFN 5 x 5 mm package also reduces board footprint compared with larger discrete-interface implementations.

🖨️

Network Printers

The KSZ8091RNBCA provides a wired 10/100-Mbps Ethernet path for printers, scanners, and multifunction office equipment. A printer controller can use either Full MII or RMII to connect to the PHY, allowing the interface to follow the processor's available I/O and timing architecture. The integrated cable-diagnostics support can assist service personnel in identifying wiring problems, while Wake-on-LAN allows queued print jobs to wake a networked device. Its 32-QFN 5 x 5 mm package supports compact consumer and commercial equipment without requiring a separate magnetics package on the PHY side.

🌐

Set-Top and Network Appliances

The KSZ8091RNBCA is suitable for set-top boxes, access devices, and compact network appliances that use 10Base-T or 100Base-TX links. RMII can be attractive where the host processor already provides a dedicated media-independent interface, while Full MII supports designs requiring the wider parallel interface. The PHY's 32-QFN 5 x 5 mm package helps preserve board area for memory, storage, or radio functions. Wake-on-LAN is useful in consumer network products, and LinkMD diagnostics can improve installation support by helping locate faults in the copper cabling path.

🧩

Internet of Things Gateways

The KSZ8091RNBCA can provide a wired Ethernet fallback or primary network link in an IoT gateway. It supports 10/100-Mbps operation over standard CAT-5 unshielded twisted-pair cable and connects to the gateway's network controller through Full MII or RMII. The small 32-QFN 5 x 5 mm package is valuable in gateways that must combine Ethernet, wireless communication, and sensors. LinkMD cable diagnostics can support remote installation troubleshooting, while Wake-on-LAN enables controlled wake-up behavior for network management tasks.

🔧

Test and Measurement Equipment

The KSZ8091RNBCA is appropriate for test and measurement instruments that need a stable 10/100 Ethernet management connection. The host controller can use RMII to reduce interface wiring or Full MII when timing isolation is preferred. LinkMD diagnostics add practical value in laboratory and production environments where cable faults must be separated from equipment failures. Wake-on-LAN can support remote control and automated test sequencing. Because the PHY uses a fine-pitch 32-QFN package, the board should provide the recommended land pattern, power-plane geometry, decoupling, and thermal-pad assembly process.

🔒

Network Security Appliances

The KSZ8091RNBCA supports copper Ethernet connectivity in security gateways, alarm controllers, and access-control equipment that operates on 10/100-Mbps networks. Its Full MII and RMII options let the designer match the PHY to the processing subsystem rather than imposing unnecessary host-side signals. LinkMD diagnostics helps commissioning teams identify cable faults, and Wake-on-LAN supports remote maintenance. The compact 32-QFN package preserves board space for security functions and radio modules. Thermal and signal-integrity planning should follow the manufacturer datasheet, particularly around the exposed pad, clock source, digital supply, and analog copper-side supply.

ملخص المنتجات الموصى بها

What is the KSZ8091RNBCA?
The KSZ8091RNBCA is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver with Full MII and RMII interfaces in a 32-QFN 5 x 5 mm package. According to the Microchip KSZ8091 datasheet, it communicates over standard CAT-5 unshielded twisted-pair cable and adds Wake-on-LAN and LinkMD cable-diagnostics functions for compact embedded Ethernet designs.
Which Ethernet speeds does the KSZ8091RNBCA support?
The KSZ8091RNBCA supports 10 Mbps and 100 Mbps Ethernet operation. According to the Microchip KSZ8091 datasheet, it is a 10Base-T/100Base-TX physical-layer transceiver intended for data transmission and reception over standard CAT-5 unshielded twisted-pair cabling. It therefore supports legacy 10/100 networks but does not describe gigabit Ethernet operation.
Does the KSZ8091RNBCA support both MII and RMII?
The KSZ8091RNBCA supports both Full MII and RMII host interfaces. According to the Microchip product documentation, the device is identified as a 1/1 transceiver with Full MII and RMII support. Full MII suits parallel host-interface designs, while RMII can reduce host-side signal count where board space and connector routing are constrained.
Where can I download the KSZ8091RNBCA datasheet PDF?
The KSZ8091RNBCA datasheet and supporting documentation are available through the official Microchip KSZ8091 product page at https://www.microchip.com/en-us/product/KSZ8091. Use the manufacturer document links on that page for the authoritative pin assignments, electrical characteristics, recommended application circuit, and package drawing before finalizing the PCB.
Where can I find the KSZ8091RNBCA pinout?
The authoritative KSZ8091RNBCA pinout is in the pin-description table and package drawing in the Microchip KSZ8091 datasheet. The device uses a 32-QFN 5 x 5 mm package with 32 numbered terminals plus its exposed thermal pad. Assign every power, ground, clock, MII or RMII, and copper-side connection according to that table rather than relying on a generic QFN drawing.
Is the KSZ8091RNBCA suitable for industrial Ethernet equipment?
The KSZ8091RNBCA is suitable for industrial Ethernet equipment when its specified operating limits and the end-product requirements are satisfied. It supports 10/100-Mbps communication over CAT-5 UTP, Full MII or RMII integration, Wake-on-LAN, and LinkMD diagnostics. Confirm the manufacturer-rated operating temperature range, isolation requirements, and system EMC constraints before approving it for a specific industrial installation.
What is the best drop-in replacement for KSZ8091RNBCA?
The closest verified same-footprint choice is the KSZ8091RNBCA-TR ordering option, which retains the KSZ8091RNBCA electrical configuration and uses tape-and-reel production packaging. Check the final pin assignment, clocking, magnetic interface, and software-driver requirements before substitution. Other Ethernet PHYs cannot be treated as drop-in replacements unless their exact package, pinout, and interface behavior are independently verified.
Can KSZ8091RNBCA-TR replace KSZ8091RNBCA?
The KSZ8091RNBCA-TR can replace KSZ8091RNBCA electrically when the two ordering codes represent the same device configuration and differ only in delivery packaging. The primary practical distinction is the -TR production packing format rather than a change in Ethernet functionality. Confirm the ordering-code details, pin compatibility, and assembly packing requirements before using it on an existing design.
What can replace the KSZ8091RNBCA?
A replacement must match the 32-QFN footprint, pin assignments, clocking method, MII or RMII behavior, magnetic-network interface, and required driver support. The KSZ8091RNBCA-TR is the verified closely related option, but it is primarily a packaging-format option rather than a different PHY. Do not select another Ethernet transceiver solely by its data rate because interface timing and pin compatibility can prevent a PCB drop-in replacement.
KSZ8091RNBCA vs KSZ8091RNBCA-TR: which ordering code should I choose?
Choose KSZ8091RNBCA for tray-oriented procurement and KSZ8091RNBCA-TR for tape-and-reel manufacturing. The two references belong to the same KSZ8091 10/100 Ethernet PHY family and retain the same 32-QFN 5 x 5 mm device format. The choice should follow assembly process, incoming-reel requirements, and distributor inventory rather than an expected change in electrical performance.
When should I choose the KSZ8091RNBCA over another Ethernet PHY?
Choose the KSZ8091RNBCA when a design needs a compact 10/100-Mbps copper Ethernet PHY with Full MII or RMII, Wake-on-LAN, and LinkMD diagnostics in a 32-QFN package. Select a different PHY when the design requires gigabit data rates, a different host interface, another package, or a magnetic-network implementation that has already been validated. The KSZ8091 is strongest in legacy 10/100 embedded systems.
Where can I buy KSZ8091RNBCA online?
Use the Request a Quote form on this XAIPART product page to request availability, current unit pricing, minimum order quantity, and lead time for KSZ8091RNBCA. A Microchip manufacturer listing also provides ordering information for the exact device. Confirm the required quantity, tray or tape-and-reel format, date code, and shipment destination when submitting the request.
What is the price of KSZ8091RNBCA?
Current KSZ8091RNBCA pricing is best obtained through the Request a Quote form on this page because quotation status, quantity, and delivery packaging affect the final commercial terms. Submit the required quantity and packaging preference for a current response. Do not rely on a historical or generic Ethernet-PHY price when budgeting a new production quantity.
What is the lead time and stock status for KSZ8091RNBCA?
Request the current KSZ8091RNBCA stock status, factory lead time, and estimated shipment date through the Request a Quote form on this page. The Microchip ordering listing provides order and shipment information for the exact device, but live inventory and lead time can change with demand. Include your required quantity, date-code preference, and target delivery date in the request.
What are the key specifications of KSZ8091RNBCA that engineers should know?
The key KSZ8091RNBCA specifications are 10/100-Mbps Ethernet operation, Full MII and RMII host interfaces, single-supply architecture, 32-QFN 5 x 5 mm packaging, Wake-on-LAN, EEE, and LinkMD diagnostics. According to the Microchip product page and datasheet, the device is designed for standard CAT-5 UTP cabling. Check the electrical table for voltage, current, temperature, and timing limits before release.

بيانات مرجعية هندسية لـ KSZ8091RNBCA — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose KSZ8091RNBCA when the product needs a compact 10/100-Mbps copper Ethernet PHY with Full MII or RMII, Wake-on-LAN, EEE, and LinkMD diagnostics. Select KSZ8091RNBCA-TR when the circuit design is unchanged but the assembly process requires tape-and-reel production packaging; it retains the same 32-QFN 5 x 5 mm footprint and electrical configuration. Choose a different PHY when the system requires gigabit Ethernet, a host interface other than Full MII or RMII, a different package, or a magnetic-network architecture that has already been validated. Before approving any cross-family substitute, compare all terminal assignments, supply rails, clocking requirements, strap behavior, timing, exposed-pad connections, and driver support. The KSZ8091 family is strongest for embedded systems using legacy 10/100 networks and standard CAT-5 UTP.

المقارنة مع البدائل

المعامل هذا المنتج KSZ8091RNBCA-TR
Package 32-QFN (5x5) 32-QFN (5x5) - same
Brand Microchip Technology Microchip Technology
Product Type 10/100 Ethernet PHY transceiver 10/100 Ethernet PHY transceiver
Supported Ethernet Rates 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps
Host Interface Full MII and RMII Full MII and RMII
Supply Architecture Single supply Single supply
Wake-on-LAN Support Supported Supported
Cable Diagnostics LinkMD LinkMD
Cable Support Standard CAT-5 UTP Standard CAT-5 UTP
Order Packing Tray Tape and reel

أبرز الفروقات

  • Retains the same functional configuration for automated production assembly (مقابلKSZ8091RNBCA-TR)
  • Combines compact packaging with flexible host connectivity (مقابلKSZ8091RNBCA-TR)
  • Adds network-management and service functions to the 10/100 PHY (مقابلKSZ8091RNBCA-TR)

ملاحظات التصميم

Use the manufacturer reference layout for the 32-QFN land pattern, exposed-pad connection, via arrangement, and component placement. Keep the clock, digital interface, supply, and copper-side connections short, and maintain a continuous ground reference beneath the device. Separate noisy switching supplies from the PHY's analog and clock areas, and route the Ethernet differential pair as a controlled-impedance pair directly through the magnetic-component region without stubs or test pads unless the layout guide permits them.

Follow the manufacturer datasheet for the exact supply rails, sequencing, decoupling capacitors, and exposed-pad connection. Place required bypass components at the specified pins and connect the exposed thermal pad to the recommended ground plane rather than treating it as an optional thermal feature. Verify startup behavior with the selected Full MII or RMII configuration and clock source, and check supply ripple at the PHY because copper-link performance and noise immunity can be affected by power-system design.

Do not assume that another 10/100 Ethernet PHY is a drop-in replacement merely because both use a QFN package. Confirm all 32 terminal assignments, the exposed pad, supply requirements, reference clock, reset or strap behavior, MII/RMII pin multiplexing, and the required software-driver sequence. The KSZ8091RNBCA-TR is the verified closely related ordering option for automated assembly, but its tape-and-reel format should be confirmed against the board's incoming-material and feeder requirements.

معلومات الامتثال

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

RoHS compliance is identified in the component compliance listing. The source material does not establish REACH, lead-free, halogen-free, or conflict-minerals status, so those fields remain unknown.

تم التحقق من البيانات في: 2026-11-14 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

KSZ8091RNBCA datasheet KSZ8091RNBCA pinout KSZ8091RNBCA datasheet pdf KSZ8091RNBCA equivalent KSZ8091RNBCA replacement KSZ8091RNBCA vs KSZ8091RNBCA-TR KSZ8091RNBCA footprint KSZ8091RNBCA price KSZ8091RNBCA stock Microchip KSZ8091RNBCA KSZ8091RNBCA 32-QFN pinout KSZ8091RNBCA application circuit

المكونات والمصطلحات ذات الصلة

Microchip Technology KSZ8091 KSZ8091RNBCA KSZ8091RNBCA-TR Ethernet PHY physical-layer transceiver 10Base-T 100Base-TX Full MII RMII Ethernet MAC CAT-5 UTP Wake-on-LAN LinkMD cable diagnostics EEE 32-QFN QFN family surface mount SMD 10 Mbps 100 Mbps industrial Ethernet network appliance IoT gateway embedded control system
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر