KSZ8091RNBCA - 10/100 Ethernet PHY | Microchip Technology
MPN: KSZ8091RNBCA ✓ NakahandaKSZ8091RNBCA Ulas
An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts digital data from a network controller into signals suitable for twisted-pair cabling and converts received cable signals back into digital data. Within the network interface hierarchy, the KSZ8091 sits between an Ethernet MAC or embedded processor and the physical cable. Its highly integrated PHY implementation reduces board space, external-component count, and the design effort required for a 10/100 Ethernet connection.
The device supports both 10 Mbps and 100 Mbps Ethernet operation and offers Full MII and RMII host interfaces. Full MII provides a wider parallel interface for systems designed around dedicated parallel bus signals, while RMII reduces the number of host-side interface signals for more compact embedded designs. Wake-on-LAN support allows the network system to detect remote activity, and LinkMD provides diagnostic functions for identifying common cable faults and simplifying network troubleshooting.
The KSZ8091RNBCA is packaged in a compact 32-QFN package measuring 5 x 5 mm. This surface-mount format is suitable for space-constrained embedded equipment and provides a direct connection between the PHY, magnetics, and host interface circuitry. Because the package has fine-pitch leads and a thermal pad, assembly requires a controlled land pattern, stencil design, and reflow profile. Signal-integrity and layout decisions should follow the pin assignment, recommended application circuit, and decoupling guidance in the manufacturer datasheet.
Typical uses include industrial Ethernet controllers, embedded control systems, set-top equipment, printers, network appliances, and consumer products that require a wired 10/100 connection. In these systems, the KSZ8091 can be paired with an Ethernet magnetics component and a host controller with either MII or RMII support. Its diagnostic features are especially useful in products installed remotely or in maintenance-intensive industrial environments.
When assigning PCB resources, prioritize an uninterrupted ground plane, short high-speed signal connections, correct impedance-controlled differential pairs, and proper isolation between the digital PHY and analog copper-side circuitry. Follow the manufacturer datasheet for the supported RMII or MII configuration, reference termination, crystal requirements, magnetic-device selection, and decoupling values. Confirm every unused signal state and verify timing margin at the intended system clock.
This page combines manufacturer feature information with package, sourcing, replacement, and design guidance. It also highlights the practical trade-offs among available same-footprint options so engineers can select the correct ordering code and plan PCB assembly without changing the Ethernet PHY architecture.
Mga alternatibo na pwedeng ilagay na KSZ8091RNBCA — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
KSZ8091RNBCA-TR
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
KSZ8091RNBCA Mga Spesipikasyon
| Product Type | 10/100 Ethernet physical-layer transceiver (PHY) |
| Supported Ethernet Rates | 10 Mbps and 100 Mbps |
| Host Interface | Full MII and RMII |
| Cable Support | CAT-5 unshielded twisted-pair cable |
| Supply Architecture | Single supply |
| Packhaging | 32-QFN, 5 x 5 mm |
| Uri ng Pagpapasok | Surface mount |
| Wake-on-LAN Support | Supported |
| Cable Diagnostics | LinkMD cable diagnostics |
| Energy-Efficient Ethernet | EEE |
| Tindminan RoHS | Compliant |
Gabay sa Pin Configuration ng KSZ8091RNBCA 32-qfn, 5 x 5 mm
Pin configuration para sa KSZ8091RNBCA (32-qfn, 5 x 5 mm package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa KSZ8091RNBCA.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
KSZ8091RNBCA ay nararapat para sa 6 aplikasyons: Industrial Embedded Ethernet, Network Printers, Set-Top and Network Appliances, Internet of Things Gateways, Test and Measurement Equipment, Network Security Appliances.
Industrial Embedded Ethernet
The KSZ8091RNBCA fits industrial embedded controllers that require a compact 10/100-Mbps wired-network connection. It sits between the host processor and an Ethernet magnetic component, supporting Full MII or RMII according to the host interface design. Full MII provides dedicated parallel signals for systems with established timing, while RMII can simplify routing on space-constrained boards. Wake-on-LAN supports remote activation, and LinkMD assists maintenance teams with cable diagnostics. The 32-QFN 5 x 5 mm package also reduces board footprint compared with larger discrete-interface implementations.
Inirekomenda
Network Printers
The KSZ8091RNBCA provides a wired 10/100-Mbps Ethernet path for printers, scanners, and multifunction office equipment. A printer controller can use either Full MII or RMII to connect to the PHY, allowing the interface to follow the processor's available I/O and timing architecture. The integrated cable-diagnostics support can assist service personnel in identifying wiring problems, while Wake-on-LAN allows queued print jobs to wake a networked device. Its 32-QFN 5 x 5 mm package supports compact consumer and commercial equipment without requiring a separate magnetics package on the PHY side.
Inirekomenda
Set-Top and Network Appliances
The KSZ8091RNBCA is suitable for set-top boxes, access devices, and compact network appliances that use 10Base-T or 100Base-TX links. RMII can be attractive where the host processor already provides a dedicated media-independent interface, while Full MII supports designs requiring the wider parallel interface. The PHY's 32-QFN 5 x 5 mm package helps preserve board area for memory, storage, or radio functions. Wake-on-LAN is useful in consumer network products, and LinkMD diagnostics can improve installation support by helping locate faults in the copper cabling path.
Inirekomenda
Internet of Things Gateways
The KSZ8091RNBCA can provide a wired Ethernet fallback or primary network link in an IoT gateway. It supports 10/100-Mbps operation over standard CAT-5 unshielded twisted-pair cable and connects to the gateway's network controller through Full MII or RMII. The small 32-QFN 5 x 5 mm package is valuable in gateways that must combine Ethernet, wireless communication, and sensors. LinkMD cable diagnostics can support remote installation troubleshooting, while Wake-on-LAN enables controlled wake-up behavior for network management tasks.
Inirekomenda
Test and Measurement Equipment
The KSZ8091RNBCA is appropriate for test and measurement instruments that need a stable 10/100 Ethernet management connection. The host controller can use RMII to reduce interface wiring or Full MII when timing isolation is preferred. LinkMD diagnostics add practical value in laboratory and production environments where cable faults must be separated from equipment failures. Wake-on-LAN can support remote control and automated test sequencing. Because the PHY uses a fine-pitch 32-QFN package, the board should provide the recommended land pattern, power-plane geometry, decoupling, and thermal-pad assembly process.
Inirekomenda
Network Security Appliances
The KSZ8091RNBCA supports copper Ethernet connectivity in security gateways, alarm controllers, and access-control equipment that operates on 10/100-Mbps networks. Its Full MII and RMII options let the designer match the PHY to the processing subsystem rather than imposing unnecessary host-side signals. LinkMD diagnostics helps commissioning teams identify cable faults, and Wake-on-LAN supports remote maintenance. The compact 32-QFN package preserves board space for security functions and radio modules. Thermal and signal-integrity planning should follow the manufacturer datasheet, particularly around the exposed pad, clock source, digital supply, and analog copper-side supply.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for KSZ8091RNBCA — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | KSZ8091RNBCA-TR |
|---|---|---|
| Package | 32-QFN (5x5) | 32-QFN (5x5) - same |
| Brand | Microchip Technology | Microchip Technology |
| Product Type | 10/100 Ethernet PHY transceiver | 10/100 Ethernet PHY transceiver |
| Supported Ethernet Rates | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps |
| Host Interface | Full MII and RMII | Full MII and RMII |
| Supply Architecture | Single supply | Single supply |
| Wake-on-LAN Support | Supported | Supported |
| Cable Diagnostics | LinkMD | LinkMD |
| Cable Support | Standard CAT-5 UTP | Standard CAT-5 UTP |
| Order Packing | Tray | Tape and reel |
Pangunahing mga Pagkakaiba
- Retains the same functional configuration for automated production assembly (kumpara saKSZ8091RNBCA-TR)
- Combines compact packaging with flexible host connectivity (kumpara saKSZ8091RNBCA-TR)
- Adds network-management and service functions to the 10/100 PHY (kumpara saKSZ8091RNBCA-TR)
Talaan ng Disenyo
Use the manufacturer reference layout for the 32-QFN land pattern, exposed-pad connection, via arrangement, and component placement. Keep the clock, digital interface, supply, and copper-side connections short, and maintain a continuous ground reference beneath the device. Separate noisy switching supplies from the PHY's analog and clock areas, and route the Ethernet differential pair as a controlled-impedance pair directly through the magnetic-component region without stubs or test pads unless the layout guide permits them.
Follow the manufacturer datasheet for the exact supply rails, sequencing, decoupling capacitors, and exposed-pad connection. Place required bypass components at the specified pins and connect the exposed thermal pad to the recommended ground plane rather than treating it as an optional thermal feature. Verify startup behavior with the selected Full MII or RMII configuration and clock source, and check supply ripple at the PHY because copper-link performance and noise immunity can be affected by power-system design.
Do not assume that another 10/100 Ethernet PHY is a drop-in replacement merely because both use a QFN package. Confirm all 32 terminal assignments, the exposed pad, supply requirements, reference clock, reset or strap behavior, MII/RMII pin multiplexing, and the required software-driver sequence. The KSZ8091RNBCA-TR is the verified closely related ordering option for automated assembly, but its tape-and-reel format should be confirmed against the board's incoming-material and feeder requirements.
Impormasyon ng Pagsunod sa Kautusan
RoHS compliance is identified in the component compliance listing. The source material does not establish REACH, lead-free, halogen-free, or conflict-minerals status, so those fields remain unknown.