Microchip Technology

KSZ8851-16MLLJ - 10/100 Ethernet Controller | Microchip

MPN: KSZ8851-16MLLJ ✓ نشط
48-LQFP (7 mm x 7 mm) Package 10/100 Mb/s Speed Dynamic memory pointer Memory
الحد الأدنى للطلب: 1 |

KSZ8851-16MLLJ نظرة عامة

The Microchip Technology KSZ8851-16MLLJ is a single-port 10/100 Ethernet MAC controller with an integrated 10/100 Base-T/TX PHY, parallel host interface, and 48-pin LQFP package measuring 7 mm by 7 mm. It is designed to add cost-effective Ethernet connectivity to traditional embedded systems that do not require PCI Express.

An Ethernet MAC controller is an interface IC that manages packet transmission, reception, addressing, and host-bus transactions, while a Base-T/TX PHY provides the physical-layer connection to twisted-pair Ethernet. Together, the MAC and PHY form a complete single-port Ethernet endpoint for embedded processors, industrial controllers, test equipment, and connected products.

The KSZ8851 family supports configurable generic processor interfaces. The 16-bit MLLJ configuration provides an 8-bit or 16-bit non-PCI host interface, allowing the controller to connect with embedded processors that use parallel buses rather than SPI or PCI Express. The controller also uses dynamic memory pointers for efficient descriptor-based packet management.

The integrated MAC, PHY, and host interface consolidate several Ethernet functions into one package. This can reduce external component count and simplify the board-level connection between the processor and RJ45 network interface. The 48-LQFP package has exposed leads suitable for conventional surface-mount assembly and inspection.

Typical applications include industrial automation, factory equipment, building controls, embedded instrumentation, serial-to-Ethernet gateways, print servers, and embedded network appliances. The device is particularly appropriate when a system needs a deterministic parallel host connection and a conventional 10/100 Ethernet network rather than a higher-speed multi-gigabit interface.

Designers should use the manufacturer pin-description table when assigning processor signals, PHY connections, clocks, reset inputs, and decoupling networks. Magnetics and connector selection must be matched to the Ethernet application, while the host bus must support the selected 8-bit or 16-bit operating mode and required address and data timing.

This page organizes the manufacturer product information, package details, datasheet links, interface alternatives, and practical implementation guidance. It is intended to help engineers identify whether the KSZ8851-16MLLJ matches the required Ethernet speed, parallel bus architecture, package, temperature class, and embedded-system application.

بدائل مباشرة لـ KSZ8851-16MLLJ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع KSZ8851-16MLLJ (نفس عامل الشكل والبصمة) — يختلف في AEC-Q100 Qualification, Device Type, Ethernet Speed, Host Interface, Package.

Microchip Technology
AEC-Q100 Qualification: Not qualified; automotive qualification is identified for the KSZ8851-16MLLU
Device Type: Single-port Ethernet MAC controller with integrated 10/100 Base-T/TX PHY
Ethernet Speed: 10 Mbps to 100 Mbps
قارن مع KSZ8851-16MLLJ →

KSZ8851-16MLLI

✅ بديل مباشر
Microchip Technology
📦 48-LQFP (7 mm x 7 mm)
Single-port Ethernet MAC controller with integrated 10/100 Base-T/TX PHY · 10 Mbps to 100 Mbps · 8-bit or 16-bit generic non-PCI CPU interface · 3.3 V · 48-LQFP, 7 x 7 mm · 48 pins

تواصل لمعرفة السعر

عرض ورقة البيانات ←

KSZ8851-16MLLU-TR

✅ بديل مباشر
📦 48-LQFP (7 mm x 7 mm)
Same 48-pin KSZ8851 Ethernet-controller family and parallel-interface architecture; the ordering suffix and detailed temperature or electrical differences require confirmation in the manufacturer data sheet

📋 بديل مرجعي (غير موجود في الكتالوج)

KSZ8851-16MLL

✅ بديل مباشر
📦 48-LQFP (7 mm x 7 mm)
Base 48-pin 10/100 Ethernet controller variant with an 8-bit or 16-bit non-PCI interface; ordering-code temperature and qualification details differ from MLLJ

📋 بديل مرجعي (غير موجود في الكتالوج)

KSZ8851-16MLL-TR

✅ بديل مباشر
📦 48-LQFP (7 mm x 7 mm)
Same 48-pin 10/100 Ethernet controller with an 8-bit or 16-bit non-PCI interface; the ordering suffix may change packing or qualification terms rather than the electrical function

📋 بديل مرجعي (غير موجود في الكتالوج)

KSZ8851-16MLLJ المواصفات

Device Type Single-port Ethernet MAC controller with integrated PHY
Ethernet Speed 10/100 Mb/s
Physical Layer 10/100 Base-T/TX PHY
Host Interface 8-bit or 16-bit generic non-PCI parallel interface
Memory Interface Dynamic memory pointer
العلبة 48-LQFP (7 mm x 7 mm)
Lead-Free Package Option 48-pin lead-free LQFP
نوع التركيب Surface Mount
درجة حرارة التشغيل -40°C to +125°C
حالة RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

دليل تكوين أطراف KSZ8851-16MLLJ 48-pin lead-free lqfp

تكوين الأطراف لـ KSZ8851-16MLLJ (حزمة 48-pin lead-free lqfp). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 48-pin lead-free lqfp لـ KSZ8851-16MLLJ

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ KSZ8851-16MLLJ.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

KSZ8851-16MLLJ مناسب لـ 6 التطبيقs: Industrial Automation Controller, Building Control Gateway, Embedded Instrumentation, Print Server, Factory Sensor Gateway, Network Appliance with Legacy CPU.

🏭

Industrial Automation Controller

The KSZ8851-16MLLJ fits industrial automation equipment that needs a single 10/100 Mb/s Ethernet connection and a parallel embedded-processor interface. Its 8-bit or 16-bit non-PCI bus avoids requiring a PCI Express interface in the host controller, while the integrated Base-T/TX PHY reduces the number of separate network-interface components. The documented -40°C to +125°C operating range supports industrial environments with significant enclosure temperature variation. Place the device between the processor bus and Ethernet magnetics, and confirm the data sheet's address mode, bus timing, reset requirements, and interrupt signals during hardware design.

🏭

Building Control Gateway

The KSZ8851-16MLLJ is suitable for a building-control gateway that bridges a legacy embedded processor to 10/100 Mb/s Ethernet. The controller's generic 8-bit or 16-bit parallel interface can share a straightforward bus arrangement with sensors, actuators, and local I/O, while the integrated MAC and PHY provide one complete network endpoint. Its -40°C to +125°C range accommodates equipment installed near heat-producing power stages. The design must still provide the required Ethernet magnetics, connector, isolation policy, reference clock, and decoupling network specified by the manufacturer data sheet.

🔧

Embedded Instrumentation

The KSZ8851-16MLLJ can add networked data transfer to embedded instrumentation without requiring a host processor with a PCI Express interface. Its 10/100 Mb/s operation is appropriate for supervisory data, configuration transfer, and status reporting, while the 48-LQFP package supports conventional surface-mount assembly. The 8-bit or 16-bit interface width provides design flexibility for processors with limited external I/O. Engineers should use the manufacturer timing information to select the operating mode, include required clock and reset circuitry, and verify that the Ethernet connection complies with the installation's isolation requirements.

🖥️

Print Server

The KSZ8851-16MLLJ is appropriate for a print server or print-to-Ethernet adapter built around a legacy embedded processor. A single-port 10/100 Mb/s link provides sufficient bandwidth for many print paths, and the generic parallel host interface allows the controller to operate without a dedicated PCI Express interface. The integrated Base-T/TX PHY simplifies the network side of the design, while the 48-LQFP footprint remains manageable for compact industrial electronics. Productization still requires correct Ethernet magnetic coupling, surge protection, firmware-driven descriptor handling, and host-bus timing checks.

🧩

Factory Sensor Gateway

The KSZ8851-16MLLJ can provide an Ethernet uplink for a factory sensor gateway that aggregates local measurements before forwarding them to supervisory equipment. The 10/100 Mb/s rate is well matched to typical sensor and status traffic, and the 8-bit or 16-bit non-PCI interface suits small processors that need deterministic access to packet descriptors and interrupt-driven status. Its extended 125°C upper operating temperature is valuable in compact gateways mounted near industrial heat sources. Use the manufacturer guidance for clocking, PHY termination, magnetic components, and power-supply sequencing to preserve network performance.

🌐

Network Appliance with Legacy CPU

The KSZ8851-16MLLJ gives a legacy embedded CPU a cost-effective 10/100 Mb/s Ethernet connection through a generic parallel bus. It is useful for protocol gateways, serial-to-Ethernet products, and compact network appliances that lack PCI Express but can support an 8-bit or 16-bit non-PCI interface. Integrating the MAC and PHY reduces board complexity compared with separating the host-facing MAC from the physical layer. The design should account for packet-memory organization, interrupt latency, host bus access time, and Ethernet transformer requirements. The manufacturer evaluation-board documentation provides a practical starting point for the 48-LQFP implementation.

What is the KSZ8851-16MLLJ?
The KSZ8851-16MLLJ is a single-port 10/100 Ethernet MAC controller with an integrated Base-T/TX PHY and a generic 8-bit or 16-bit non-PCI parallel host interface. According to the manufacturer KSZ8851 product page, the family provides cost-effective, high-throughput Ethernet connectivity for traditional embedded systems. The specified MPN uses a 48-LQFP package measuring 7 mm by 7 mm.
What Ethernet speed does the KSZ8851-16MLLJ support?
The KSZ8851-16MLLJ supports 10/100 Mb/s Ethernet through its integrated 10/100 Base-T/TX PHY. According to the manufacturer product page and distributor product descriptions, the device combines a Fast Ethernet MAC with physical-layer circuitry for a single network port. It is appropriate for embedded systems needing standard twisted-pair Ethernet rather than gigabit or multi-port networking.
Where can I download the KSZ8851-16MLLJ datasheet PDF?
The KSZ8851-16MLLJ datasheet PDF is available from the manufacturer-linked document titled KSZ8851-16MLL/MLLI/MLLU on Mouser. The manufacturer evaluation-board user guide also describes the 48-pin, 7 mm by 7 mm lead-free LQFP implementation. Use the manufacturer data sheet for authoritative pin assignments, electrical limits, timing, and application guidance.
Where is the KSZ8851-16MLLJ pinout?
The KSZ8851-16MLLJ pinout is documented in the pin-description table of the manufacturer KSZ8851-16MLL data sheet. The exact signal names and no-connect assignments should be taken from that table when assigning PCB tracks. The public product information confirms a 48-LQFP package but does not reproduce all 48 pin names on this page.
Can the KSZ8851-16MLLJ interface with an 8-bit processor bus?
Yes. The manufacturer describes the KSZ8851-16MLL family as supporting an 8-bit or 16-bit generic processor interface with non-PCI bus timing. The exact operating mode and external processor connection should follow the data sheet's bus-timing and pin-configuration sections. This makes the controller suitable for embedded processors that do not provide PCI Express.
What is the difference between KSZ8851-16MLLJ and KSZ8851-16MLLI?
Both devices are identified as 10/100 Ethernet controllers with a generic 8-bit or 16-bit parallel host interface, but their ordering suffixes identify different device variants. The MLLI listing identifies an industrial temperature range of -40°C to +85°C, while the MLLJ-related listing identifies an operating range of -40°C to +125°C. Verify ordering-code details against the manufacturer data sheet before substitution.
What is the best drop-in replacement for KSZ8851-16MLLJ?
KSZ8851-16MLLI is the closest identified same-family option because it uses the same 48-LQFP Ethernet-controller format and generic parallel interface, but it is specified for -40°C to +85°C rather than the MLLJ temperature range of -40°C to +125°C. It should therefore be treated as a conditional replacement only when the lower temperature ceiling is acceptable.
Can KSZ8851-16MLLI replace KSZ8851-16MLLJ?
KSZ8851-16MLLI can replace KSZ8851-16MLLJ only when the system does not require operation above +85°C and the remaining ordering-code details are verified. Both are 48-LQFP, 10/100 Ethernet controller variants with generic 8-bit or 16-bit host interfaces. The documented temperature ceiling differs by 40°C, which is the principal qualification limitation.
Is KSZ8851-16MLLJ suitable for industrial automation equipment?
Yes, KSZ8851-16MLLJ is suitable for industrial automation equipment that uses a 10/100 Mb/s Ethernet network and a parallel embedded processor interface. Its documented -40°C to +125°C range supports thermally demanding industrial environments. The host processor must still support the required bus width, timing, address mode, and interrupt requirements described in the data sheet.
When should I choose KSZ8851-16MLLJ instead of KSZ8851-16MLLI?
Choose KSZ8851-16MLLJ when the equipment may operate above +85°C and requires the documented -40°C to +125°C range. Choose KSZ8851-16MLLI for installations constrained to +85°C or below. Both provide the same identified 10/100 Ethernet, 8-bit or 16-bit parallel-interface, and 48-LQFP package characteristics, so temperature is the principal selection criterion.
Where can I buy KSZ8851-16MLLJ online?
Use the Request a Quote form on this page to request current KSZ8851-16MLLJ availability, commercial terms, and lead time. The distributor records confirm that the exact MPN is cataloged, but their snippets do not provide qualifying quantity-break prices that can be represented as current structured pricing. XAIPART will return a quotation through the page request workflow.
What is the price of KSZ8851-16MLLJ?
Current KSZ8851-16MLLJ pricing is not stated on this page because the product records do not show a qualifying quantity-break price table for the exact MPN. Request a quote through the Request a Quote form on this page to obtain the current unit price, volume pricing, availability, and shipping information for your specific order.
What is the lead time for KSZ8851-16MLLJ?
The current lead time for KSZ8851-16MLLJ should be requested through the Request a Quote form on this page. The distributor snippets confirm catalog availability or ordering activity but do not state a fixed manufacturing or shipment interval. The quotation response should reflect the selected quantity, package suffix, and current factory status.
Is KSZ8851-16MLLJ in stock?
Stock status should be confirmed through the Request a Quote form on this page for the exact KSZ8851-16MLLJ ordering code. The distributor records indicate that the part is listed for ordering, but no reliable quantity-level stock count is published in the cited snippets. The quote workflow can provide current availability for the requested quantity.
What are the key specifications of KSZ8851-16MLLJ that engineers should know?
The key KSZ8851-16MLLJ specifications are single-port 10/100 Mb/s Ethernet, an integrated Base-T/TX PHY, an 8-bit or 16-bit generic non-PCI parallel host interface, dynamic memory-pointer operation, and a 48-LQFP package measuring 7 mm by 7 mm. According to the manufacturer product page, the device targets traditional embedded systems requiring cost-effective, high-throughput Ethernet connectivity.
What can replace KSZ8851-16MLLJ?
KSZ8851-16MLLI is the closest identified replacement for KSZ8851-16MLLJ because it retains the 48-LQFP format, 10/100 Ethernet function, integrated PHY, and generic 8-bit or 16-bit parallel interface. Its documented temperature range ends at +85°C, compared with +125°C for the MLLJ variant, so replacement is appropriate only when the operating environment stays below that limit.
What is the best Microchip equivalent for KSZ8851-16MLLJ?
The best identified Microchip-family equivalent is KSZ8851-16MLLI because it uses the same 48-LQFP controller format and the same generic 8-bit or 16-bit non-PCI interface. Confirm the temperature requirement before choosing it: MLLI is documented for -40°C to +85°C, while KSZ8851-16MLLJ is documented for -40°C to +125°C. No verified cross-brand drop-in equivalent is listed.

بيانات مرجعية هندسية لـ KSZ8851-16MLLJ — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose KSZ8851-16MLLJ when the equipment needs a single 10/100 Mb/s Ethernet port, a generic 8-bit or 16-bit parallel host interface, and operation across the full -40°C to +125°C range. Its integrated Base-T/TX PHY and 48-LQFP package are appropriate for legacy embedded processors that do not support PCI Express. Choose KSZ8851-16MLLI for the same architecture when the installation is limited to +85°C; its lower temperature ceiling is the principal trade-off. KSZ8851-16MLLU-TR and KSZ8851-16MLL are same-family ordering options, but their individual qualification and temperature details must be confirmed before use. KSZ8851-16MLL-TR is primarily distinguished by its ordering suffix and should be used only after checking the manufacturer ordering table. For every option, verify supply voltages, clock requirements, bus timing, PHY support components, and all 48 pin assignments against the manufacturer data sheet.

المقارنة مع البدائل

المعامل هذا المنتج KSZ8851-16MLLI KSZ8851-16MLLU-TR KSZ8851-16MLL KSZ8851-16MLL-TR
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm)
Device Function Single-port 10/100 Ethernet MAC controller with integrated PHY Single-port 10/100 Ethernet MAC controller with integrated PHY KSZ8851-16MLL family Ethernet controller Single-port 10/100 Ethernet MAC controller with integrated PHY Single-port 10/100 Ethernet MAC controller with integrated PHY
Ethernet Speed 10/100 Mb/s 10/100 Mb/s 10/100 Mb/s 10/100 Mb/s 10/100 Mb/s
Host Interface 8-bit or 16-bit generic non-PCI parallel interface 8-bit or 16-bit generic non-PCI parallel interface 8-bit or 16-bit generic non-PCI parallel interface 8-bit or 16-bit generic non-PCI parallel interface 8-bit or 16-bit generic non-PCI parallel interface
Physical Layer 10/100 Base-T/TX PHY 10/100 Base-T/TX PHY 10/100 Base-T/TX PHY 10/100 Base-T/TX PHY 10/100 Base-T/TX PHY
Package Lead Configuration 48-pin lead-free LQFP 48-pin LQFP 48-pin LQFP 48-pin lead-free LQFP 48-pin lead-free LQFP

أبرز الفروقات

  • Higher documented upper operating temperature (مقابلKSZ8851-16MLLI)
  • Complete 10/100 Ethernet endpoint in one controller package (مقابلKSZ8851-16MLLU-TR)
  • Flexible parallel host integration (مقابلKSZ8851-16MLL)
  • Industrial temperature capability with an extended upper limit (مقابلKSZ8851-16MLL-TR)

ملاحظات التصميم

Use the manufacturer KSZ8851-16MLL evaluation-board layout as the primary placement reference for the 48-LQFP device. Keep the host-bus traces short, route clock and reset signals away from Ethernet and switching-node circuitry, and place the required bypass capacitors close to their associated supply pins. The parallel bus should be laid out with continuous reference planes where practical, while Ethernet traces should follow the layout and isolation guidance in the manufacturer data sheet.

The host interface can operate in 8-bit or 16-bit modes, so processor data, address, control, and interrupt signals must be assigned according to the selected configuration. Check propagation delay, bus timing, address mapping, and interrupt polarity in the data sheet rather than treating the interface as a fixed-width bus. Firmware should also configure the controller's memory-pointer and FIFO behavior before packets are transferred.

Design the Ethernet physical layer with the network magnetics, connector, protection network, and PHY traces as a controlled subsystem. Follow the manufacturer's recommended component placement and trace geometry, keep the connector interface away from sensitive analog or high-speed clock circuitry, and provide the specified isolation between external cable circuitry and the host side. Do not infer the Ethernet connection details from the digital host-bus schematic alone.

A 48-LQFP footprint alone does not guarantee a valid substitution. Before replacing KSZ8851-16MLLJ with KSZ8851-16MLLI, verify the operating-temperature ceiling, supply configuration, ordering suffix, and approved package form. MLLI is documented for -40°C to +85°C, whereas MLLJ is documented for -40°C to +125°C; substituting the wrong grade can reduce environmental margin even when the pins and Ethernet function appear unchanged.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Yes
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The manufacturer evaluation-board user guide identifies a 48-pin lead-free LQFP implementation. RoHS is reported for the related KSZ8851-16MLLI variant, but the exact KSZ8851-16MLLJ compliance declarations are not stated in the cited product records.

عمليات بحث ذات صلة

ksz8851 16mll ksz8851 datasheet ksz8851 eval board ksz8851 16mlli ksz8851 pdf ksz8851 16mql microchip ksz8851 micrel ksz8851 KSZ8851-16MLLJ datasheet KSZ8851-16MLLJ pinout KSZ8851-16MLLJ equivalent KSZ8851-16MLLJ replacement KSZ8851-16MLLJ price KSZ8851-16MLLJ stock KSZ8851-16MLLJ vs KSZ8851-16MLLI

المكونات والمصطلحات ذات الصلة

Microchip Technology Micrel Semiconductor KSZ8851-16MLLJ KSZ8851-16MLLI KSZ8851-16MLLU-TR KSZ8851-16MLL KSZ8851-16MLL-TR KSZ8842-PMBL-TR Ethernet MAC controller Fast Ethernet 10/100 Base-T/TX PHY non-PCI host interface 8-bit parallel interface 16-bit parallel interface dynamic memory pointer 48-LQFP LQFP family surface mount SMD industrial automation embedded systems building controls network gateway Ethernet magnetics RoHS REACH
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر