Microchip Technology

LAN9354TI/ML - 3-Port 10/100 Managed Ethernet Switch

MPN: LAN9354TI/ML ✓ نشط
1.8 V to 3.3 V Vdss 56-pin QFN, 8 x 8 mm, exposed pad Package 10 Mbps or 100 Mbps Speed
الحد الأدنى للطلب: 1 |

LAN9354TI/ML نظرة عامة

The Microchip Technology LAN9354TI/ML is a highly integrated, small-footprint 3-port managed Ethernet switch for consumer, embedded, and industrial equipment. It combines three 10/100 Base-T/TX Ethernet ports with a 10/100 Base-T/TX PHY, management interfaces, and switching functions in one 56-pin 8 x 8 mm QFN package with an exposed pad. The device is optimized for applications where board area, port count, and system integration are more important than supporting Gigabit Ethernet data rates.

Three 10/100 Ethernet ports make the LAN9354TI/ML suitable for embedded gateways, industrial controllers, set-top equipment, printers, scanners, and network-connected sensor systems. Each port can operate at 10 Mbps or 100 Mbps, allowing the switch to connect devices operating at different link speeds while presenting a single integrated switching block to the host processor. Management access is available through the I2C interface, and the LAN9354 family also provides the hardware foundation for host-connected embedded Ethernet designs.

The 56-QFN package exposes the Ethernet magnetics, PHY, switching fabric, management logic, and control interfaces in one device. This integration reduces the number of external components and simplifies PCB layout compared with discrete PHY-plus-switch solutions. The exposed pad provides a thermal and electrical connection between the device and the PCB, making copper-pour design and controlled thermal rise important parts of a successful implementation.

The LAN9354TI/ML is a tape-and-reel ordering variant of the Microchip LAN9354 family. Because Ethernet magnetics and high-speed signal routing are integral to the package, layout should follow the manufacturer's reference design rather than be treated as a generic QFN placement. Differential pairs, the reference clock, supply connections, and the exposed-pad ground structure require careful partitioning from sensitive analog and processor circuitry.

For embedded Ethernet designs, the switch provides a practical way to add multiple 10/100 network ports without dedicating a separate bus or processor interface to every PHY. Its managed-switch architecture supports remote configuration and monitoring strategies that are valuable in equipment that must be maintained across long service intervals. The three-port configuration also allows an uplink to be combined with two downstream devices in compact equipment.

The principal trade-off is that the LAN9354TI/ML supports Fast Ethernet rather than Gigabit Ethernet. Designs requiring 1 GbE links, multi-gigabit data rates, or external SFP cages require a different switch family. Within its 10/100 class, however, the device offers strong integration in a small 8 x 8 mm footprint, making it a strong candidate for space-constrained consumer, embedded, and industrial Ethernet products.

بدائل مباشرة لـ LAN9354TI/ML — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع LAN9354TI/ML (نفس عامل الشكل والبصمة) — يختلف في Device Type, Package, Ethernet Speed, Management Interface, Number of Ports.

Microchip Technology
Device Type: 3-port managed 10/100 Ethernet switch
Package: 56-QFN, 8 x 8 mm
Ethernet Speed: 10/100 Base-T
Microchip Technology
Device Type: 3-port 10/100 managed Ethernet switch
Package: 56-QFN (8 x 8 mm)
Ethernet Speed: 10/100 Base-T
Microchip Technology
Device Type: 3-Port Managed 10/100 Ethernet Switch with RMII
Package: 56-QFN (8x8 mm) with exposed pad
Management Interface: I2C (SMI), EEPROM/SPI boot, web-based GUI

LAN9354I/ML

✅ بديل مباشر
Microchip Technology
📦 56-QFN (8 x 8 mm)
3-port 10/100 managed Ethernet switch · 3 ports · 10/100 Base-T · 10/100 Base-T/TX PHY · RMII · I2C · 56-QFN (8 x 8 mm) · Surface mount

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LAN9354T/ML

✅ بديل مباشر
Microchip Technology
📦 56-QFN (8 x 8 mm)
3-Port Managed 10/100 Ethernet Switch with RMII · 3 integrated ports · 10 Mbps / 100 Mbps per port · 10/100BASE-T/TX · RMII · I2C (SMI), EEPROM/SPI boot, web-based GUI · Programmable (host/EEPROM configuration) · 56-QFN (8x8 mm) with exposed pad

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LAN9354TI/ML الحدود القصوى والخصائص الكهربائية

Device Type 3-Port Managed Ethernet Switch with 10/100 Base-T/TX PHY
Number of Ethernet Ports 3 ports
Ethernet Speed 10 Mbps or 100 Mbps
Management Interface I2C
العلبة 56-pin QFN, 8 x 8 mm, exposed pad
نوع التركيب Surface Mount
Packaging Tape & Reel
Core Supply Voltage 1.8 V to 3.3 V
Ethernet Magnetics Integrated
Product Status Active

دليل تكوين أطراف LAN9354TI/ML 56-pin qfn, 8 x 8 mm, exposed pad

تكوين الأطراف لـ LAN9354TI/ML (حزمة 56-pin qfn, 8 x 8 mm, exposed pad). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 56-pin qfn, 8 x 8 mm, exposed pad لـ LAN9354TI/ML

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ LAN9354TI/ML.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

LAN9354TI/ML مناسب لـ 6 التطبيقs: Embedded Industrial Controller, Networked Sensor Gateway, Multifunction Network Printer, Set-Top and Consumer Media Gateway, Building and Home Automation Controller, Industrial Test and Measurement Instrument.

🏭

Embedded Industrial Controller

The LAN9354TI/ML fits an embedded controller that needs three Fast Ethernet connections for a service port, local HMI, and sensor network. Its 10/100 Mbps operation matches controller traffic that is primarily telemetry, configuration, and supervisory data. Three integrated ports reduce the number of external PHY and magnetics assemblies, while I2C management lets the host processor configure switch registers without a dedicated management PHY. The 56-QFN footprint is compact, but the exposed pad and differential routing require the manufacturer's recommended layout.

🧩

Networked Sensor Gateway

A sensor gateway can use the LAN9354TI/ML to aggregate three 10/100 Base-T links for downstream sensors, a local controller, and an uplink. Fast Ethernet is appropriate for periodic environmental, industrial, and building-automation measurements that do not require sustained Gigabit throughput. Integrated magnetics reduce board-level component count, while the I2C control path provides a practical way to read link status and update configuration over the host bus.

🖨️

Multifunction Network Printer

The three Fast Ethernet ports of the LAN9354TI/ML suit a printer or imaging product that connects to a network, a host computer, and a service interface. Integrated switch and magnetics functions consolidate several network connections into one controller-based design. The small 8 x 8 mm QFN package is valuable inside compact plastic enclosures where board area is limited. Designers should allow clearance around the device and follow the reference layout to preserve Ethernet signal and thermal performance.

📺

Set-Top and Consumer Media Gateway

Consumer media equipment often requires wired connectivity for content distribution, configuration, and service functions without the cost and area of a multi-gigabit switch. The LAN9354TI/ML provides three 10/100 ports in one package and can support a product with one external network uplink and two local or legacy-device links. Its small footprint suits space-constrained enclosures, while I2C management integrates configuration with the main system controller.

🏠

Building and Home Automation Controller

The LAN9354TI/ML can connect a building controller to a wired network uplink and two local automation or access-control nodes. The 10/100 Mbps capability is sufficient for supervisory control, configuration exchange, and status monitoring rather than high-resolution media transport. I2C management simplifies link administration from the controller, while integrated magnetics reduce external component count. For installations with long cable runs, verify the complete design against the manufacturer's application guidance.

🔬

Industrial Test and Measurement Instrument

A test instrument with separate service, measurement-station, and network links can use the three 10/100 ports of the LAN9354TI/ML. The integrated switch simplifies the Ethernet front end while preserving independent physical connections. I2C management provides a serial path for software-controlled configuration and monitoring. Because many laboratory instruments impose strict EMC and thermal requirements, the implementation should use the reference layout, provide clean supply filtering, and verify enclosure-related temperature rise.

What is the LAN9354TI/ML?
The LAN9354TI/ML is a Microchip Technology 3-port managed Ethernet switch with an integrated 10/100 Base-T/TX PHY and an I2C management interface. According to the Microchip LAN9354 product page, the device is optimized for consumer, embedded, and industrial designs that require multiple Fast Ethernet ports in a compact implementation.
How many Ethernet ports does the LAN9354TI/ML have?
The LAN9354TI/ML provides three 10/100 Ethernet ports. The Microchip LAN9354 family combines those ports with integrated Ethernet magnetics and management functions in a single 56-pin QFN package. This makes the device suitable for designs with one uplink and two downstream network connections.
Does the LAN9354TI/ML support Gigabit Ethernet?
No. The LAN9354TI/ML supports Fast Ethernet at 10 Mbps and 100 Mbps per port, not 1 GbE. The Microchip product description identifies it as a 10/100 managed switch, so a Gigabit Ethernet switch is required when any link must operate above 100 Mbps.
What package does the LAN9354TI/ML use?
The LAN9354TI/ML uses a 56-pin 8 x 8 mm QFN package with an exposed pad. Distributor listings identify the package as 56-QFN, and the exposed pad must be connected according to the manufacturer's layout guidance for electrical and thermal performance.
What interface is used to manage the LAN9354TI/ML?
The LAN9354TI/ML uses an I2C management interface for configuration and control. According to the manufacturer product page and distributor technical descriptions, the switch is intended for embedded systems where a host processor can configure and monitor the Ethernet ports through a serial management bus.
Where can I download the LAN9354TI/ML datasheet?
The official Microchip LAN9354 data sheet is available at the manufacturer PDF link published on this page. It is the primary document for pin descriptions, electrical characteristics, initialization, register access, magnetic-component integration, and reference PCB layouts.
Where can I find the LAN9354TI/ML pinout?
The LAN9354TI/ML pin assignments are defined in the pin-description section of the official Microchip LAN9354 data sheet. Use that table and the reference layout when assigning tracks, test points, and component placement; do not infer pin functions from a generic 56-QFN drawing.
What are the key specifications of LAN9354TI/ML that engineers should know?
The LAN9354TI/ML is a 3-port, 10/100 Mbps managed Ethernet switch with an integrated PHY, I2C management, and a 56-pin 8 x 8 mm QFN package. It supports operation from a 1.8 V to 3.3 V supply range and is actively offered by Microchip Technology for embedded and industrial designs.
Is LAN9354TI/ML pin-compatible with LAN9354I/ML?
Yes. The LAN9354I/ML comparison identifies consistent terminals and packages, indicating that it can replace the LAN9354TI/ML without circuit modification. Its I2C management interface matches the target device, although engineers should still verify the complete register set, initialization flow, and application-level configuration.
What is the difference between LAN9354TI/ML and LAN9354T/ML?
The principal documented difference is the management interface: LAN9354TI/ML uses I2C, while LAN9354T/ML provides RMII management and web-based monitoring. Both belong to the same 3-port, 10/100, 56-pin QFN family, but the interfaces are not interchangeable without reviewing the host firmware and management architecture.
What can replace the LAN9354TI/ML?
The LAN9354I/ML is the closest documented drop-in replacement because it uses the same I2C management approach and retains consistent package terminals. Other switch families such as KSZ8463, KSZ9477, BCM53115, and 88E6350 offer related Ethernet functionality, but they should not be treated as drop-in replacements without package and pin verification.
What is the best Microchip equivalent for the LAN9354TI/ML?
The LAN9354I/ML is the best documented Microchip equivalent for an I2C-managed, three-port 10/100 Ethernet switch. It retains the same package and terminal arrangement according to the published comparison. Confirm device revision, firmware expectations, and management-register compatibility before releasing it for production.
When should I choose the LAN9354TI/ML instead of a Gigabit Ethernet switch?
Choose the LAN9354TI/ML when all network links operate at 10 Mbps or 100 Mbps and the priority is integrating three ports, magnetics, PHY functions, and management into a small 8 x 8 mm package. Select a Gigabit switch instead when video streaming, storage transfers, or backbone links can exceed 100 Mbps.
Is the LAN9354TI/ML suitable for embedded industrial controllers?
Yes. The LAN9354TI/ML is specifically application-optimized for embedded and industrial electronic designs. Its three Fast Ethernet ports support local controller, sensor, and service connections, while I2C management allows a host processor to configure and monitor the network hardware.
How do I request a quote for the LAN9354TI/ML?
Use the Request a Quote form on this page to request current commercial terms, stock, and lead time for the LAN9354TI/ML. Commercial availability and pricing can change by order quantity and market conditions, so current terms should be confirmed through the quote process rather than from a static listing.
What design precautions are required for the LAN9354TI/ML exposed pad?
The exposed pad should follow the manufacturer's recommended land pattern, with a low-impedance ground connection and adequate thermal copper. Do not route sensitive signals beneath the device, and preserve the recommended thermal-via pattern to avoid excessive junction-temperature rise.
Does the LAN9354TI/ML include Ethernet magnetics?
The LAN9354 family integrates the Ethernet magnetic components within the switch package. This integration reduces external magnetics and board area, but it also makes compliance with the manufacturer's reference layout and component-placement guidance particularly important for reliable Ethernet performance.

بيانات مرجعية هندسية لـ LAN9354TI/ML — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the LAN9354TI/ML when a compact product needs three 10/100 Ethernet ports, integrated magnetics, and I2C-based switch management. It is a strong fit for embedded controllers, sensor gateways, printers, and industrial instruments whose data traffic does not exceed 100 Mbps. The LAN9354I/ML is the most direct alternative when the same mechanical and management arrangement is required and the product is ordered in a tray format. LAN9354T/ML belongs to the same 56-QFN family but is better suited to designs built around RMII management and web-based remote monitoring. KSZ8463, KSZ9477, BCM53115, and 88E6350 families perform related Ethernet-switch functions, but published material does not establish pin-to-pin compatibility with the 56-QFN target, so they should be treated as redesign candidates rather than drop-in replacements. For any 1 GbE link requirement, choose a Gigabit switch instead.

المقارنة مع البدائل

المعامل هذا المنتج LAN9354I/ML LAN9354T/ML
Brand Microchip Technology Microchip Technology Microchip Technology
Package 56-QFN (8 x 8 mm) 56-QFN (8 x 8 mm) 56-QFN (8 x 8 mm)
Port Count 3 ports 3 ports 3 ports
Ethernet Speed 10 Mbps or 100 Mbps 10 Mbps or 100 Mbps 10 Mbps or 100 Mbps
Management Interface I2C I2C RMII
Integrated 10/100 PHY Yes Yes Yes
Product Status Active Active Not verified

أبرز الفروقات

  • Closest documented replacement retains the I2C management architecture (مقابلLAN9354I/ML)
  • Three Fast Ethernet ports with integrated PHY and magnetics in one package (مقابلLAN9354T/ML)
  • I2C management simplifies integration with a host microcontroller (مقابلLAN9354T/ML)
  • Purpose-built for compact embedded and industrial Ethernet equipment (مقابلLAN9354I/ML)

ملاحظات التصميم

Treat the LAN9354TI/ML Ethernet connections as a constrained high-speed layout rather than generic QFN routing. Follow the Microchip reference design for differential pair geometry, component placement, crystal or clock layout, and return paths. Keep the exposed pad tied to the specified ground network, preserve its thermal-via pattern, and avoid routing sensitive processor signals beneath the switch.

Decouple each supply rail independently with the capacitance and placement specified by the manufacturer. Keep switching or high-current load circuitry away from the switch's supply pins and analog return connections. Verify startup current, core voltage tolerance, and the voltage at every pin during power sequencing; Ethernet magnetics and PHY circuits must never be allowed to exceed their specified operating limits.

Do not substitute a switch merely because it offers three Ethernet ports. Confirm the 56-QFN footprint, exposed-pad implementation, RMII or I2C host interface, register compatibility, clock requirements, and initialization sequence. The LAN9354I/ML is the closest match for I2C-managed designs, while LAN9354T/ML changes the management architecture and can require firmware and PCB changes.

Estimate junction-temperature rise from the device dissipation, board thermal resistance, and ambient temperature before the product is sealed into an enclosure. Use the exposed pad with an uninterrupted ground pour and adequate copper area; add thermal vias where the reference layout specifies them. Validate with thermocouples or an infrared measurement in the highest ambient condition.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The device is a general-purpose commercial integrated circuit; automotive qualification does not apply. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation.

تم التحقق من البيانات في: 2026-11-09 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

LAN9354TI/ML datasheet LAN9354TI/ML datasheet pdf LAN9354TI/ML pinout LAN9354TI/ML specifications LAN9354TI/ML equivalent LAN9354TI/ML replacement LAN9354TI/ML vs LAN9354I/ML LAN9354TI/ML vs LAN9354T/ML Microchip LAN9354TI/ML 56 QFN managed Ethernet switch LAN9354TI/ML embedded controller LAN9354TI/ML price LAN9354TI/ML stock where to buy LAN9354TI/ML LAN9354TI/ML lead time

المكونات والمصطلحات ذات الصلة

Microchip Technology LAN9354TI/ML LAN9354I/ML LAN9354T/ML Ethernet switch managed Ethernet switch 10/100 Base-T/TX PHY Fast Ethernet I2C management interface RMII integrated Ethernet magnetics 56-pin QFN 8 x 8 mm package exposed pad surface-mount package semiconductor embedded networking industrial controller sensor gateway networked printer building automation test and measurement differential pair routing power-supply decoupling
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر