LAN9354TI/ML - 3-Port 10/100 Managed Ethernet Switch
N.º da peça: LAN9354TI/ML ✓ AtivoLAN9354TI/ML Visão geral
Three 10/100 Ethernet ports make the LAN9354TI/ML suitable for embedded gateways, industrial controllers, set-top equipment, printers, scanners, and network-connected sensor systems. Each port can operate at 10 Mbps or 100 Mbps, allowing the switch to connect devices operating at different link speeds while presenting a single integrated switching block to the host processor. Management access is available through the I2C interface, and the LAN9354 family also provides the hardware foundation for host-connected embedded Ethernet designs.
The 56-QFN package exposes the Ethernet magnetics, PHY, switching fabric, management logic, and control interfaces in one device. This integration reduces the number of external components and simplifies PCB layout compared with discrete PHY-plus-switch solutions. The exposed pad provides a thermal and electrical connection between the device and the PCB, making copper-pour design and controlled thermal rise important parts of a successful implementation.
The LAN9354TI/ML is a tape-and-reel ordering variant of the Microchip LAN9354 family. Because Ethernet magnetics and high-speed signal routing are integral to the package, layout should follow the manufacturer's reference design rather than be treated as a generic QFN placement. Differential pairs, the reference clock, supply connections, and the exposed-pad ground structure require careful partitioning from sensitive analog and processor circuitry.
For embedded Ethernet designs, the switch provides a practical way to add multiple 10/100 network ports without dedicating a separate bus or processor interface to every PHY. Its managed-switch architecture supports remote configuration and monitoring strategies that are valuable in equipment that must be maintained across long service intervals. The three-port configuration also allows an uplink to be combined with two downstream devices in compact equipment.
The principal trade-off is that the LAN9354TI/ML supports Fast Ethernet rather than Gigabit Ethernet. Designs requiring 1 GbE links, multi-gigabit data rates, or external SFP cages require a different switch family. Within its 10/100 class, however, the device offers strong integration in a small 8 x 8 mm footprint, making it a strong candidate for space-constrained consumer, embedded, and industrial Ethernet products.
Alternativas drop-in para LAN9354TI/ML — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com LAN9354TI/ML (mesmo formato e footprint) — diferindo em Device Type, Package, Ethernet Speed, Management Interface, Number of Ports.
LAN9354I/ML
✅ Drop-InConsulte o preço
Ver ficha técnica →LAN9354T/ML
✅ Drop-InConsulte o preço
Ver ficha técnica →LAN9354TI/ML Classificações máximas e características elétricas
| Device Type | 3-Port Managed Ethernet Switch with 10/100 Base-T/TX PHY |
| Number of Ethernet Ports | 3 ports |
| Ethernet Speed | 10 Mbps or 100 Mbps |
| Management Interface | I2C |
| Encapsulamento | 56-pin QFN, 8 x 8 mm, exposed pad |
| Tipo de montagem | Surface Mount |
| Packaging | Tape & Reel |
| Core Supply Voltage | 1.8 V to 3.3 V |
| Ethernet Magnetics | Integrated |
| Product Status | Active |
Guia de Configuração de Pinos do LAN9354TI/ML 56-pin qfn, 8 x 8 mm, exposed pad
Configuração de pinos para LAN9354TI/ML (pacote 56-pin qfn, 8 x 8 mm, exposed pad). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para LAN9354TI/ML.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
LAN9354TI/ML é adequado para 6 aplicaçãos: Embedded Industrial Controller, Networked Sensor Gateway, Multifunction Network Printer, Set-Top and Consumer Media Gateway, Building and Home Automation Controller, Industrial Test and Measurement Instrument.
Embedded Industrial Controller
The LAN9354TI/ML fits an embedded controller that needs three Fast Ethernet connections for a service port, local HMI, and sensor network. Its 10/100 Mbps operation matches controller traffic that is primarily telemetry, configuration, and supervisory data. Three integrated ports reduce the number of external PHY and magnetics assemblies, while I2C management lets the host processor configure switch registers without a dedicated management PHY. The 56-QFN footprint is compact, but the exposed pad and differential routing require the manufacturer's recommended layout.
Recomendado
Networked Sensor Gateway
A sensor gateway can use the LAN9354TI/ML to aggregate three 10/100 Base-T links for downstream sensors, a local controller, and an uplink. Fast Ethernet is appropriate for periodic environmental, industrial, and building-automation measurements that do not require sustained Gigabit throughput. Integrated magnetics reduce board-level component count, while the I2C control path provides a practical way to read link status and update configuration over the host bus.
Recomendado
Multifunction Network Printer
The three Fast Ethernet ports of the LAN9354TI/ML suit a printer or imaging product that connects to a network, a host computer, and a service interface. Integrated switch and magnetics functions consolidate several network connections into one controller-based design. The small 8 x 8 mm QFN package is valuable inside compact plastic enclosures where board area is limited. Designers should allow clearance around the device and follow the reference layout to preserve Ethernet signal and thermal performance.
Recomendado
Set-Top and Consumer Media Gateway
Consumer media equipment often requires wired connectivity for content distribution, configuration, and service functions without the cost and area of a multi-gigabit switch. The LAN9354TI/ML provides three 10/100 ports in one package and can support a product with one external network uplink and two local or legacy-device links. Its small footprint suits space-constrained enclosures, while I2C management integrates configuration with the main system controller.
Recomendado
Building and Home Automation Controller
The LAN9354TI/ML can connect a building controller to a wired network uplink and two local automation or access-control nodes. The 10/100 Mbps capability is sufficient for supervisory control, configuration exchange, and status monitoring rather than high-resolution media transport. I2C management simplifies link administration from the controller, while integrated magnetics reduce external component count. For installations with long cable runs, verify the complete design against the manufacturer's application guidance.
Recomendado
Industrial Test and Measurement Instrument
A test instrument with separate service, measurement-station, and network links can use the three 10/100 ports of the LAN9354TI/ML. The integrated switch simplifies the Ethernet front end while preserving independent physical connections. I2C management provides a serial path for software-controlled configuration and monitoring. Because many laboratory instruments impose strict EMC and thermal requirements, the implementation should use the reference layout, provide clean supply filtering, and verify enclosure-related temperature rise.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para LAN9354TI/ML — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | LAN9354I/ML | LAN9354T/ML |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 56-QFN (8 x 8 mm) | 56-QFN (8 x 8 mm) | 56-QFN (8 x 8 mm) |
| Port Count | 3 ports | 3 ports | 3 ports |
| Ethernet Speed | 10 Mbps or 100 Mbps | 10 Mbps or 100 Mbps | 10 Mbps or 100 Mbps |
| Management Interface | I2C | I2C | RMII |
| Integrated 10/100 PHY | Yes | Yes | Yes |
| Product Status | Active | Active | Not verified |
Principais diferenciais
- Closest documented replacement retains the I2C management architecture (vs LAN9354I/ML)
- Three Fast Ethernet ports with integrated PHY and magnetics in one package (vs LAN9354T/ML)
- I2C management simplifies integration with a host microcontroller (vs LAN9354T/ML)
- Purpose-built for compact embedded and industrial Ethernet equipment (vs LAN9354I/ML)
Notas de projeto
Treat the LAN9354TI/ML Ethernet connections as a constrained high-speed layout rather than generic QFN routing. Follow the Microchip reference design for differential pair geometry, component placement, crystal or clock layout, and return paths. Keep the exposed pad tied to the specified ground network, preserve its thermal-via pattern, and avoid routing sensitive processor signals beneath the switch.
Decouple each supply rail independently with the capacitance and placement specified by the manufacturer. Keep switching or high-current load circuitry away from the switch's supply pins and analog return connections. Verify startup current, core voltage tolerance, and the voltage at every pin during power sequencing; Ethernet magnetics and PHY circuits must never be allowed to exceed their specified operating limits.
Do not substitute a switch merely because it offers three Ethernet ports. Confirm the 56-QFN footprint, exposed-pad implementation, RMII or I2C host interface, register compatibility, clock requirements, and initialization sequence. The LAN9354I/ML is the closest match for I2C-managed designs, while LAN9354T/ML changes the management architecture and can require firmware and PCB changes.
Estimate junction-temperature rise from the device dissipation, board thermal resistance, and ambient temperature before the product is sealed into an enclosure. Use the exposed pad with an uninterrupted ground pour and adequate copper area; add thermal vias where the reference layout specifies them. Validate with thermocouples or an infrared measurement in the highest ambient condition.
Informações de conformidade
The device is a general-purpose commercial integrated circuit; automotive qualification does not apply. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation.