LC4032ZC-5T48C - 32-Macrocell 1.8V CPLD | Lattice
MPN: LC4032ZC-5T48C ✗ انتهى عمره الإنتاجيLC4032ZC-5T48C نظرة عامة
A complex programmable logic device, or CPLD, is a programmable digital semiconductor that combines multiple programmable logic blocks with a flexible interconnect structure. CPLDs occupy the practical middle ground between simple programmable logic devices and larger FPGAs. The LC4032ZC-5T48C therefore provides a compact implementation path for deterministic glue logic, control logic, interface adaptation, and system-level conditional functions.
The principal device attributes include 32 macrocells, two logic blocks, 32 available I/O pins, a 1.7 V to 1.9 V internal supply range, and a 5 ns propagation-delay grade. Its 48-pin TQFP package measures 7 mm by 7 mm according to the product listing. In-system programmability allows a programmed design to be updated without removing the device, provided the board supplies the required programming interface and power sequencing.
The ispMACH 4000Z architecture is intended for high-density programmable logic applications where a relatively small logic count and straightforward deterministic behavior are important. The -5 suffix identifies the 5 ns speed grade, while the ZC portion places the device in the 4000Z family. The device can operate from 3.3 V, 2.5 V, or 1.8 V supply arrangements as described in the family documentation, while the product listing identifies a 1.8 V operating specification for this exact orderable device.
Typical uses include industrial control, communications infrastructure, peripheral interfacing, boot and sequencing logic, data acquisition, and embedded system support functions. The combination of 32 I/O pins and a compact 48-TQFP footprint can reduce the number of separate logic devices needed for modest but interconnected control requirements. Design engineers should also account for programming voltage, I/O standards, timing constraints, and unused-pin treatment.
For PCB implementation, place the device according to the exact package drawing in the Lattice datasheet and route programming and configuration signals away from high-speed nets. Validate all timing paths against the selected 5 ns speed grade and ensure that unused inputs are terminated in a defined state. The exposed package perimeter provides easy assembly inspection, although land-pattern and solder-reflow details remain critical to manufacturing yield.
This product page combines the device architecture, pin-compatible family options, application guidance, and engineering-focused comparison information. It also organizes sourcing questions around the XAIPART Request a Quote form, helping buyers evaluate lifecycle, availability, and exact MPN requirements without relying on generic CPLD selection assumptions.
بدائل مباشرة لـ LC4032ZC-5T48C — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع LC4032ZC-5T48C (نفس عامل الشكل والبصمة) — يختلف في Device Type, Package, Maximum Operating Frequency, Propagation Delay.
LC4032ZC-5TN48C
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
LC4032ZC-5T48I
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←LC4032ZC-75T48C
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
LC4032C-5T48C
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←LC4032C-10T48I
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
LC4032ZC-5T48C الحدود القصوى والخصائص الكهربائية
| Device Type | Complex programmable logic device (CPLD) |
| Device Family | ispMACH 4000Z |
| Macrocell Count | 32 macrocells |
| Logic Block Count | 2 logic blocks |
| I/O Count | 32 I/O pins |
| Propagation Delay | 5 ns |
| Maximum Operating Frequency | 250 MHz |
| Internal Supply Voltage | 1.7 V to 1.9 V |
| Named Supply Options | 3.3 V / 2.5 V / 1.8 V |
| العلبة | 48-pin TQFP, 7 mm x 7 mm |
| نوع التركيب | Surface mount |
| Programming | In-system programmable |
دليل تكوين أطراف LC4032ZC-5T48C 48-pin tqfp, 7 mm x 7 mm
تكوين الأطراف لـ LC4032ZC-5T48C (حزمة 48-pin tqfp, 7 mm x 7 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ LC4032ZC-5T48C.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
LC4032ZC-5T48C مناسب لـ 6 التطبيقs: Industrial Control and Sequencing, Communications Interface Adaptation, Peripheral Bridge and Protocol Conversion, Data Acquisition Signal Conditioning, Embedded System Support Logic, Programmable Logic Test Fixture.
Industrial Control and Sequencing
The LC4032ZC-5T48C fits compact industrial control logic that combines conditional decisions, timing, status encoding, and actuator-interface coordination. Its 32 macrocells and two logic blocks provide a defined resource envelope, while the 5 ns propagation-delay grade supports faster control paths than the 7.5 ns and 10 ns family alternatives. The 32 I/O pins can connect sensors, interlocks, relay-control logic, and status indicators without requiring several simple logic devices. For a production design, verify the industrial temperature grade, supported I/O standards, and supply tolerances before release. Use the manufacturer datasheet for pin assignment, setup and hold requirements, and configuration timing.
موصى به
Communications Interface Adaptation
The LC4032ZC-5T48C is suitable for communications equipment that requires deterministic glue logic around processors, transceivers, or memory interfaces. Its 32 I/O pins and 32 macrocells can implement framing assistance, command formatting, status decoding, and interface timing adaptation where operation must remain predictable after configuration. The 250 MHz maximum operating performance and 5 ns propagation-delay grade provide useful margin relative to slower LC4032 options. Designers should establish which signals are truly general-purpose I/O, which are configuration pins, and whether level translation is required for the attached interface. Validate timing against the actual channel and processor specifications rather than relying only on the nominal device frequency.
موصى به
Peripheral Bridge and Protocol Conversion
The LC4032ZC-5T48C can implement compact bridges between dissimilar digital interfaces by translating signal formats, managing enable or reset conditions, and coordinating protocol handshakes. Its 32 macrocells are appropriate for small protocol adapters, while 32 I/O pins reduce the need for external buffers when the design does not exceed the device's I/O capabilities. The 5 ns speed grade can shorten combinational paths compared with the 10 ns LC4032C-10T48I alternative, although speed is only one part of a complete timing closure. Check input thresholds, output drive, and supply voltage for every external interface, and program unused inputs to a defined state to prevent unpredictable current or state transitions.
موصى به
Data Acquisition Signal Conditioning
The LC4032ZC-5T48C can provide digital signal conditioning around sensors, converters, and acquisition modules. Typical functions include channel selection, trigger qualification, range-command decoding, and synchronization between acquisition and processing sections. Its two logic blocks and 32 macrocells create a practical limit on simultaneous channel count and logic depth, so partition the design carefully when multiple converters operate in parallel. The 5 ns propagation-delay grade offers additional timing margin for short combinational decision paths compared with slower family members. Confirm analog-to-digital boundary timing separately, as the CPLD does not replace the converter's specified settling and acquisition requirements.
موصى به
Embedded System Support Logic
The LC4032ZC-5T48C is useful for embedded boards requiring boot coordination, watchdog handling, reset generation, power-state decoding, or peripheral-enable logic. In-system programmability allows configuration updates during production test or controlled field maintenance, reducing the need to redesign a programmable logic footprint for routine logic revisions. The 48-TQFP package provides a manageable assembly form factor, and the 32 available I/O pins can connect multiple control domains. Designers must plan a deterministic startup state, use pull-up or pull-down termination where required, and keep the programming interface accessible. Confirm the device's configuration behavior and pin states from the Lattice documentation for every implemented board revision.
موصى به
Programmable Logic Test Fixture
The LC4032ZC-5T48C can be used in test fixtures for pattern generation, control sequencing, and interface emulation where a compact, deterministic programmable-logic solution is required. Its 32 macrocells and 32 I/O pins are sufficient for moderate control paths, while the 5 ns speed grade can represent faster fixture timing than the 7.5 ns alternative. In-system programmability is useful when a fixture uses different patterns for different DUTs or production stages. Validate signal integrity, I/O voltage compatibility, and programming isolation to prevent fixture electronics from interfering with the device under test. Use grounded, short programming connections and protect unused outputs where they connect to external test hardware.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ LC4032ZC-5T48C — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | LC4032ZC-5TN48C | LC4032ZC-5T48I | LC4032ZC-75T48C | LC4032C-5T48C | LC4032C-10T48I |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP |
| Device Type | CPLD | CPLD | CPLD | CPLD | CPLD | CPLD |
| Propagation Delay | 5 ns | 5 ns | 5 ns | 7.5 ns | 5 ns | 10 ns |
| Ordering Suffix Grade | C | N | I | C | C | I |
أبرز الفروقات
- Faster propagation-delay grade than the 7.5 ns family option (مقابلLC4032ZC-75T48C)
- Higher timing performance than the 10 ns LC4032 option (مقابلLC4032C-10T48I)
- Matches the nominal 5 ns grade of the same-family ordering variant (مقابلLC4032ZC-5TN48C)
- Higher clock capability than slower LC4032 alternatives (مقابلLC4032ZC-75T48C)
ملاحظات التصميم
Use the exact 48-pin TQFP land pattern and exposed-pad guidance from the Lattice package drawing rather than a generic 48-pin footprint. Keep configuration pins and their supporting resistors or termination networks away from adjacent switching nodes, and assign unused I/O pins to defined levels in the design file. A short return path to the device ground and uninterrupted supply connections will reduce logic-noise sensitivity during high-speed system transitions.
Timing closure should use the 5 ns propagation-delay grade together with setup, hold, clock, and output-skew constraints from the Lattice datasheet. Do not infer guaranteed system frequency solely from the 250 MHz maximum operating-performance figure. For external interfaces, calculate worst-case setup at the receiver and noise margin at the driver, including connector, trace, and external-device effects.
Do not substitute an LC4032 ordering variant solely because its suffix looks similar. Confirm that the package is 48-pin TQFP, the selected speed grade meets timing, the temperature ordering grade covers the deployment environment, and the programming interface remains compatible. LC4032ZC-75T48C has a 7.5 ns delay and LC4032C-10T48I has a 10 ns delay, so either can reduce timing margin compared with the 5 ns target device.
Follow the manufacturer's recommended supply and decoupling arrangement, including capacitor type, placement, and voltage rating. Validate operation across every expected input-voltage combination and ensure that the external I/O levels remain compatible with the selected supply arrangement. Because the exact operating and quiescent currents are not stated for every ordering variant, calculate board-level dissipation from the values in the applicable Lattice documentation before setting thermal limits.
معلومات الامتثال
The exact product listings do not state the required compliance classifications for this orderable MPN. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status using the current Lattice product documentation or a traceable supplier declaration before release.