Lattice Semiconductor

LC4032ZC-5T48C - 32-Macrocell 1.8V CPLD | Lattice

部品番号: LC4032ZC-5T48C ✗ 生産終了
1.7 V to 1.9 V Vdss 48-pin TQFP, 7 mm x 7 mm Package 250 MHz Speed
MOQ: 1 |

LC4032ZC-5T48C 概要

Lattice Semiconductor LC4032ZC-5T48C is a 32-macrocell CPLD with 32 I/O pins, a 5 ns propagation delay, and 250 MHz operating performance in a 48-pin TQFP surface-mount package. The device belongs to the ispMACH 4000Z high-density programmable logic device family and supports 1.8V operation with in-system programmability for configuration and board-level updates.

A complex programmable logic device, or CPLD, is a programmable digital semiconductor that combines multiple programmable logic blocks with a flexible interconnect structure. CPLDs occupy the practical middle ground between simple programmable logic devices and larger FPGAs. The LC4032ZC-5T48C therefore provides a compact implementation path for deterministic glue logic, control logic, interface adaptation, and system-level conditional functions.

The principal device attributes include 32 macrocells, two logic blocks, 32 available I/O pins, a 1.7 V to 1.9 V internal supply range, and a 5 ns propagation-delay grade. Its 48-pin TQFP package measures 7 mm by 7 mm according to the product listing. In-system programmability allows a programmed design to be updated without removing the device, provided the board supplies the required programming interface and power sequencing.

The ispMACH 4000Z architecture is intended for high-density programmable logic applications where a relatively small logic count and straightforward deterministic behavior are important. The -5 suffix identifies the 5 ns speed grade, while the ZC portion places the device in the 4000Z family. The device can operate from 3.3 V, 2.5 V, or 1.8 V supply arrangements as described in the family documentation, while the product listing identifies a 1.8 V operating specification for this exact orderable device.

Typical uses include industrial control, communications infrastructure, peripheral interfacing, boot and sequencing logic, data acquisition, and embedded system support functions. The combination of 32 I/O pins and a compact 48-TQFP footprint can reduce the number of separate logic devices needed for modest but interconnected control requirements. Design engineers should also account for programming voltage, I/O standards, timing constraints, and unused-pin treatment.

For PCB implementation, place the device according to the exact package drawing in the Lattice datasheet and route programming and configuration signals away from high-speed nets. Validate all timing paths against the selected 5 ns speed grade and ensure that unused inputs are terminated in a defined state. The exposed package perimeter provides easy assembly inspection, although land-pattern and solder-reflow details remain critical to manufacturing yield.

This product page combines the device architecture, pin-compatible family options, application guidance, and engineering-focused comparison information. It also organizes sourcing questions around the XAIPART Request a Quote form, helping buyers evaluate lifecycle, availability, and exact MPN requirements without relying on generic CPLD selection assumptions.

ドロップイン代替品: LC4032ZC-5T48C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: LC4032ZC-5T48C (同一形状・フットプリント) — 相違点: Device Type, Package, Maximum Operating Frequency, Propagation Delay.

Lattice Semiconductor
Device Type: CPLD / complex programmable logic device
Package: 48-pin TQFP
比較対象 LC4032ZC-5T48C →
Lattice Semiconductor
Device Type: In-System Programmable SuperFAST High-Density PLD (CPLD)
Package: 48-LQFP
Maximum Operating Frequency: 400 MHz
比較対象 LC4032ZC-5T48C →

LC4032ZC-5TN48C

✅ ドロップイン
📦 48-pin TQFP
Same LC4032ZC-5 speed and device-family designation; the N ordering suffix changes the orderable grade, with no verified difference in macrocell, I/O, or propagation-delay ratings.

📋 参考代替品(カタログ未掲載)

LC4032ZC-5T48I

✅ ドロップイン
Lattice Semiconductor
📦 48-pin TQFP
In-System Programmable SuperFAST High-Density PLD (CPLD) · ispMACH 4000 · 32 macrocells · 32 user I/Os · 5 ns · 4.4 ns · 400 MHz · 192 MHz

価格はお問い合わせください

データシートを見る →

LC4032ZC-75T48C

✅ ドロップイン
📦 48-pin TQFP
Same 48-pin LC4032ZC device family and nominal logic resources, but propagation delay changes from 5 ns to 7.5 ns, a 50% increase in delay.

📋 参考代替品(カタログ未掲載)

LC4032C-5T48C

✅ ドロップイン
Lattice Semiconductor
📦 48-pin TQFP
CPLD / complex programmable logic device · LC4032C super-fast high-density PLD · 32 macrocells · 5 ns · 48-pin TQFP · Surface mount · Programmable digital logic · LC4032C-5T48C-ND

価格はお問い合わせください

データシートを見る →

LC4032C-10T48I

✅ ドロップイン
📦 48-pin TQFP
Same 48-pin LC4032 package family, but propagation delay changes from 5 ns to 10 ns, a 100% increase; the I suffix also denotes a different ordering grade.

📋 参考代替品(カタログ未掲載)

LC4032ZC-5T48C 最大定格&電気的特性

Device Type Complex programmable logic device (CPLD)
Device Family ispMACH 4000Z
Macrocell Count 32 macrocells
Logic Block Count 2 logic blocks
I/O Count 32 I/O pins
Propagation Delay 5 ns
Maximum Operating Frequency 250 MHz
Internal Supply Voltage 1.7 V to 1.9 V
Named Supply Options 3.3 V / 2.5 V / 1.8 V
パッケージ 48-pin TQFP, 7 mm x 7 mm
実装タイプ Surface mount
Programming In-system programmable

LC4032ZC-5T48C 48-pin tqfp, 7 mm x 7 mm ピン配置ガイド

LC4032ZC-5T48C (48-pin tqfp, 7 mm x 7 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

LC4032ZC-5T48C の 48-pin tqfp, 7 mm x 7 mm パッケージピン配置図

詳細なピン配置データはありません: LC4032ZC-5T48C.

詳細は データシート をご参照ください。

主な用途

LC4032ZC-5T48C の用途: 6 件s: Industrial Control and Sequencing, Communications Interface Adaptation, Peripheral Bridge and Protocol Conversion, Data Acquisition Signal Conditioning, Embedded System Support Logic, Programmable Logic Test Fixture.

🏭

Industrial Control and Sequencing

The LC4032ZC-5T48C fits compact industrial control logic that combines conditional decisions, timing, status encoding, and actuator-interface coordination. Its 32 macrocells and two logic blocks provide a defined resource envelope, while the 5 ns propagation-delay grade supports faster control paths than the 7.5 ns and 10 ns family alternatives. The 32 I/O pins can connect sensors, interlocks, relay-control logic, and status indicators without requiring several simple logic devices. For a production design, verify the industrial temperature grade, supported I/O standards, and supply tolerances before release. Use the manufacturer datasheet for pin assignment, setup and hold requirements, and configuration timing.

🌐

Communications Interface Adaptation

The LC4032ZC-5T48C is suitable for communications equipment that requires deterministic glue logic around processors, transceivers, or memory interfaces. Its 32 I/O pins and 32 macrocells can implement framing assistance, command formatting, status decoding, and interface timing adaptation where operation must remain predictable after configuration. The 250 MHz maximum operating performance and 5 ns propagation-delay grade provide useful margin relative to slower LC4032 options. Designers should establish which signals are truly general-purpose I/O, which are configuration pins, and whether level translation is required for the attached interface. Validate timing against the actual channel and processor specifications rather than relying only on the nominal device frequency.

🔧

Peripheral Bridge and Protocol Conversion

The LC4032ZC-5T48C can implement compact bridges between dissimilar digital interfaces by translating signal formats, managing enable or reset conditions, and coordinating protocol handshakes. Its 32 macrocells are appropriate for small protocol adapters, while 32 I/O pins reduce the need for external buffers when the design does not exceed the device's I/O capabilities. The 5 ns speed grade can shorten combinational paths compared with the 10 ns LC4032C-10T48I alternative, although speed is only one part of a complete timing closure. Check input thresholds, output drive, and supply voltage for every external interface, and program unused inputs to a defined state to prevent unpredictable current or state transitions.

📟

Data Acquisition Signal Conditioning

The LC4032ZC-5T48C can provide digital signal conditioning around sensors, converters, and acquisition modules. Typical functions include channel selection, trigger qualification, range-command decoding, and synchronization between acquisition and processing sections. Its two logic blocks and 32 macrocells create a practical limit on simultaneous channel count and logic depth, so partition the design carefully when multiple converters operate in parallel. The 5 ns propagation-delay grade offers additional timing margin for short combinational decision paths compared with slower family members. Confirm analog-to-digital boundary timing separately, as the CPLD does not replace the converter's specified settling and acquisition requirements.

🖥️

Embedded System Support Logic

The LC4032ZC-5T48C is useful for embedded boards requiring boot coordination, watchdog handling, reset generation, power-state decoding, or peripheral-enable logic. In-system programmability allows configuration updates during production test or controlled field maintenance, reducing the need to redesign a programmable logic footprint for routine logic revisions. The 48-TQFP package provides a manageable assembly form factor, and the 32 available I/O pins can connect multiple control domains. Designers must plan a deterministic startup state, use pull-up or pull-down termination where required, and keep the programming interface accessible. Confirm the device's configuration behavior and pin states from the Lattice documentation for every implemented board revision.

🧪

Programmable Logic Test Fixture

The LC4032ZC-5T48C can be used in test fixtures for pattern generation, control sequencing, and interface emulation where a compact, deterministic programmable-logic solution is required. Its 32 macrocells and 32 I/O pins are sufficient for moderate control paths, while the 5 ns speed grade can represent faster fixture timing than the 7.5 ns alternative. In-system programmability is useful when a fixture uses different patterns for different DUTs or production stages. Validate signal integrity, I/O voltage compatibility, and programming isolation to prevent fixture electronics from interfering with the device under test. Use grounded, short programming connections and protect unused outputs where they connect to external test hardware.

おすすめ製品の概要

LC4032ZC-5T48I Lattice Semiconductor 使用用途: Industrial Control and Sequencing, Data Acquisition Signal Conditioning LC4032ZC-5TN48C Same-speed 48-TQFP ordering variant 使用用途: Industrial Control and Sequencing, Peripheral Bridge and Protocol Conversion, Programmable Logic Test Fixture LC4032ZC-75T48C Same-package alternative when slower timing is acceptable 使用用途: Communications Interface Adaptation, Data Acquisition Signal Conditioning, Programmable Logic Test Fixture LC4032C-5T48C Lattice Semiconductor 使用用途: Communications Interface Adaptation, Embedded System Support Logic LC4032ZC-5T48C Lattice Semiconductor 使用用途: Peripheral Bridge and Protocol Conversion LC4032C-10T48I Lower-speed family option for noncritical support functions 使用用途: Embedded System Support Logic
What is the LC4032ZC-5T48C?
The LC4032ZC-5T48C is a Lattice Semiconductor 32-macrocell CPLD with 32 I/O pins, a 5 ns propagation delay, and a 48-pin TQFP package. According to the Lattice product documentation, it is an in-system-programmable member of the ispMACH 4000Z family designed for compact, deterministic programmable logic applications.
How many I/O pins and macrocells does the LC4032ZC-5T48C have?
The LC4032ZC-5T48C provides 32 macrocells, two logic blocks, and 32 I/O pins. The exact device listing identifies it as a 32-I/O CPLD, while the family description identifies the 4000Z architecture. These figures should be used as the starting point for fan-out and logic-resource planning.
What is the operating voltage of the LC4032ZC-5T48C?
The LC4032ZC-5T48C uses an internal supply range of 1.7 V to 1.9 V and is associated with 1.8 V operation. The Lattice family documentation also describes 3.3 V, 2.5 V, and 1.8 V supply arrangements, but the selected input rails and level-shifting requirements must be confirmed against the device pin descriptions and board design.
Where can I download the LC4032ZC-5T48C datasheet PDF?
The LC4032ZC-5T48C datasheet PDF is available from the Lattice Semiconductor listing at https://pdf.digi-electronics.com/pdf/1437/LC4032ZC5T48C-datasheet.pdf. Use the manufacturer datasheet for authoritative pin descriptions, timing tables, electrical characteristics, package drawings, and programming instructions.
Where can I find the LC4032ZC-5T48C pinout?
Use the pin-description table and package drawing in the Lattice Semiconductor LC4032ZC-5T48C datasheet to assign all 48 TQFP pins. The package is a 7 mm by 7 mm 48-pin TQFP, but the precise power, ground, configuration, clock, and user-I/O functions must be taken from the exact device documentation.
What can replace the LC4032ZC-5T48C?
The closest replacements are pin-compatible 48-TQFP members of the LC4032 family, subject to speed grade and temperature-grade requirements. Verified cross-reference information identifies LC4032ZC-5TN48C, LC4032ZC-5T48I, LC4032ZC-75T48C, LC4032C-5T48C, and LC4032C-10T48I as relevant comparison points rather than unconditional substitutions.
Is LC4032ZC-5T48C suitable for industrial control logic?
The LC4032ZC-5T48C can suit industrial control logic when its timing, temperature grade, supply rails, and I/O standards satisfy the system requirements. Its 32 macrocells, 32 I/O pins, 5 ns speed grade, and 250 MHz maximum operating frequency provide useful capacity for deterministic control and interface functions.
LC4032ZC-5T48C vs LC4032ZC-75T48C: which is better?
Choose LC4032ZC-5T48C when the 5 ns speed grade is required; choose LC4032ZC-75T48C when the slower 7.5 ns grade is acceptable. Both are presented as 48-pin LC4032-family options, but the faster grade can improve timing margin at the cost of potentially different power characteristics and procurement requirements.
LC4032ZC-5T48C vs LC4032ZC-5TN48C: which one should I use?
The two parts share the LC4032ZC-5T48C device designation and 48-pin package family, while the additional N character distinguishes their ordering variants. LC4032ZC-5T48C is preferable when its exact temperature grade and qualification requirements fit; use LC4032ZC-5TN48C only after confirming its grade and ordering code in the Lattice datasheet.
When should I choose the LC4032ZC-5T48C over a faster CPLD?
Choose the LC4032ZC-5T48C when 32 macrocells and a 5 ns propagation delay meet the required logic and timing limits without adding unnecessary device complexity. It is also appropriate when 32 I/O pins, in-system programmability, and the 48-TQFP footprint simplify board integration compared with a larger programmable logic device.
Where can I buy the LC4032ZC-5T48C online?
Use the Request a Quote form on this page to request the exact LC4032ZC-5T48C, quantity, and packaging required for your build. The form allows buyers to confirm current availability, lifecycle status, and lead time for this specific orderable MPN without substituting a different speed or temperature grade.
What is the price of the LC4032ZC-5T48C?
The Request a Quote form on this page provides the current commercial answer for the LC4032ZC-5T48C, including quantity and fulfillment details. Because this is an older programmable-logic device, supply can vary by lot, so the form should be used to confirm pricing rather than relying on a generic market estimate.
What is the lead time and stock status for the LC4032ZC-5T48C?
Request current stock, lead time, minimum order quantity, and scheduled delivery through the Request a Quote form on this page. Lead time for an obsolete or mature CPLD can depend on available inventory and the exact package, temperature grade, and order quantity.
Is the LC4032ZC-5T48C in stock?
Current stock status for the LC4032ZC-5T48C should be confirmed through the Request a Quote form on this page. A product listing or searchable distributor page does not by itself guarantee live inventory, so specify the required quantity and accepted traceable sourcing conditions in the request.
What are the key specifications of the LC4032ZC-5T48C that engineers should know?
The key specifications are 32 macrocells, two logic blocks, 32 I/O pins, a 5 ns propagation delay, up to 250 MHz operating performance, a 1.7 V to 1.9 V internal supply range, and a 48-pin 7 mm by 7 mm TQFP package. The device also supports in-system programming for field or production configuration updates.
Is there a cross-brand equivalent for the LC4032ZC-5T48C?
No cross-brand drop-in equivalent is established by the available compatibility information for the LC4032ZC-5T48C. The safest replacement path is a qualified 48-TQFP member of the same LC4032 family, followed by validation of pin functions, programming, speed grade, supply requirements, and timing against the original design.

エンジニアリング参考データ: LC4032ZC-5T48C — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the LC4032ZC-5T48C when the design needs a 32-macrocell, 32-I/O CPLD with a 5 ns propagation-delay grade and 48-pin TQFP footprint. Select LC4032ZC-5TN48C or LC4032ZC-5T48I when their specific ordering temperature grades better match production requirements while retaining the same nominal speed and family position. LC4032ZC-75T48C is appropriate only when the slower 7.5 ns delay meets the complete timing budget. Use LC4032C-5T48C after confirming that its C-family resource and pin definitions are compatible with the intended design. LC4032C-10T48I is the lower-speed 10 ns option and should be selected only for paths with adequate timing margin. No cross-brand drop-in replacement should be used without a complete pin, programming, electrical, and timing comparison.

代替品との比較

パラメータ この製品 LC4032ZC-5TN48C LC4032ZC-5T48I LC4032ZC-75T48C LC4032C-5T48C LC4032C-10T48I
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package 48-pin TQFP 48-pin TQFP 48-pin TQFP 48-pin TQFP 48-pin TQFP 48-pin TQFP
Device Type CPLD CPLD CPLD CPLD CPLD CPLD
Propagation Delay 5 ns 5 ns 5 ns 7.5 ns 5 ns 10 ns
Ordering Suffix Grade C N I C C I

主な差別化要因

  • Faster propagation-delay grade than the 7.5 ns family option (vs LC4032ZC-75T48C)
  • Higher timing performance than the 10 ns LC4032 option (vs LC4032C-10T48I)
  • Matches the nominal 5 ns grade of the same-family ordering variant (vs LC4032ZC-5TN48C)
  • Higher clock capability than slower LC4032 alternatives (vs LC4032ZC-75T48C)

設計ノート

Use the exact 48-pin TQFP land pattern and exposed-pad guidance from the Lattice package drawing rather than a generic 48-pin footprint. Keep configuration pins and their supporting resistors or termination networks away from adjacent switching nodes, and assign unused I/O pins to defined levels in the design file. A short return path to the device ground and uninterrupted supply connections will reduce logic-noise sensitivity during high-speed system transitions.

Timing closure should use the 5 ns propagation-delay grade together with setup, hold, clock, and output-skew constraints from the Lattice datasheet. Do not infer guaranteed system frequency solely from the 250 MHz maximum operating-performance figure. For external interfaces, calculate worst-case setup at the receiver and noise margin at the driver, including connector, trace, and external-device effects.

Do not substitute an LC4032 ordering variant solely because its suffix looks similar. Confirm that the package is 48-pin TQFP, the selected speed grade meets timing, the temperature ordering grade covers the deployment environment, and the programming interface remains compatible. LC4032ZC-75T48C has a 7.5 ns delay and LC4032C-10T48I has a 10 ns delay, so either can reduce timing margin compared with the 5 ns target device.

Follow the manufacturer's recommended supply and decoupling arrangement, including capacitor type, placement, and voltage rating. Validate operation across every expected input-voltage combination and ensure that the external I/O levels remain compatible with the selected supply arrangement. Because the exact operating and quiescent currents are not stated for every ordering variant, calculate board-level dissipation from the values in the applicable Lattice documentation before setting thermal limits.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The exact product listings do not state the required compliance classifications for this orderable MPN. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status using the current Lattice product documentation or a traceable supplier declaration before release.

データ検証日: 2026-11-14 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

LC4032ZC-5T48C LC4032ZC-5T48C datasheet LC4032ZC-5T48C pinout LC4032ZC-5T48C datasheet pdf LC4032ZC-5T48C equivalent LC4032ZC-5T48C replacement LC4032ZC-5T48C footprint Lattice LC4032ZC-5T48C LC4032ZC-5T48C price LC4032ZC-5T48C stock LC4032ZC-5T48C vs LC4032ZC-75T48C LC4032ZC-5T48C TQFP CPLD 32 macrocell CPLD TQFP-48 1.8V 32 I/O CPLD LC4032ZC-5T48C industrial control

関連部品&用語

Lattice Semiconductor LC4032ZC-5T48C LC4032ZC-5TN48C LC4032ZC-5T48I LC4032ZC-75T48C LC4032C-5T48C LC4032C-10T48I ispMACH 4000Z CPLD complex programmable logic device FPGA macrocell logic block in-system programming TQFP-48 surface-mount package 1.8 V 5 ns propagation delay 250 MHz industrial control logic communications interface data acquisition RoHS REACH
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示