Lattice Semiconductor

LC4064B-25T44C - SuperFAST High-Density CPLD | Lattice

MPN: LC4064B-25T44C ✓ نشط
3.3 V, 2.5 V, and 1.8 V Vdss T44C Package 25 Speed
الحد الأدنى للطلب: 1 |

LC4064B-25T44C نظرة عامة

Lattice Semiconductor Corporation LC4064B-25T44C is a 3.3 V, 2.5 V, and 1.8 V in-system programmable SuperFAST high-density programmable logic device. The device is presented in the LC4064B product family and is identified by the 25 speed-grade designation and T44C package/order suffix. It belongs to the CPLD hierarchy, combining configurable digital logic, nonvolatile configuration storage, and in-system programmability in one integrated circuit.

A complex programmable logic device, or CPLD, is a user-programmable semiconductor that implements digital functions through a configurable logic architecture. CPLDs are positioned between simple programmable logic devices and larger programmable logic arrays. Compared with a fixed-function logic IC, a CPLD allows designers to revise Boolean equations, interface logic, control logic, and product-specific functions without changing the PCB. In-system programming further allows configuration to be loaded or updated through the board-level programming path.

The LC4064B family is described by Lattice as SuperFAST and high-density. Its supported 3.3 V, 2.5 V, and 1.8 V operation makes it relevant to mixed-voltage digital systems where a programmable logic device must operate alongside modern low-voltage processors, programmable controllers, and communication ICs. The 25 designation identifies the device ordering variant associated with the LC4064B-25T44C part number, while exact timing, logic-cell, pin, and package dimensions should be confirmed in the manufacturer datasheet before release.

Technically, the device combines programmable logic blocks, programmable interconnect, input and output structures, and configuration memory. These resources can be assigned to combinational and registered digital functions, allowing the LC4064B to implement control, decoding, glue logic, bus arbitration, interface conditioning, and state-machine functions. In-system programmability supports manufacturing, update, and prototype workflows where logic configuration must be changed independently of the PCB assembly.

Typical uses include industrial control interfaces, data-acquisition modules, instrumentation, embedded system support logic, communications equipment, and general-purpose digital design. The device can be especially useful when several small logic functions must be consolidated into one programmable component or when firmware-controlled field updates require a flexible logic fabric. Designers should verify interface voltage tolerance, edge-rate requirements, output drive, and input thresholds against the specific system before using it with high-speed external buses.

PCB design should follow the exact pin and land-pattern details in the Lattice Semiconductor datasheet. Keep programming signals and configuration data away from sensitive analog or high-speed nets, provide the required decoupling near the device, and include the specified programming interface for field updates. Because logic timing depends on the compiled design, a timing-constrained post-fit simulation is essential before hardware release.

This page combines the verified product identity, programming-voltage context, package and ordering information, sourcing guidance, and engineering guidance for evaluating the LC4064B-25T44C. Exact electrical limits, pin functions, resource counts, timing tables, and lifecycle status should be selected from the manufacturer datasheet and official product documentation rather than inferred from the ordering code.

بدائل مباشرة لـ LC4064B-25T44C — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

LC4064ZE-7TN48C

✅ بديل مباشر
📦 TQFP-48
The comparison identifies a different 48-pin TQFP ordering configuration and a distinct 7 speed designation versus the target's 25 designation; exact voltage and timing differences require datasheet validation.

📋 بديل مرجعي (غير موجود في الكتالوج)

LC4064B-25T44C الحدود القصوى والخصائص الكهربائية

Product Type In-System Programmable SuperFAST High-Density PLD
Manufacturer Lattice Semiconductor Corporation
Supported Supply Voltage 3.3 V, 2.5 V, and 1.8 V
Programming Type In-System Programmable
Speed Designation 25
Package Suffix T44C
Device Architecture CPLD
نوع التركيب Surface mount

دليل تكوين أطراف LC4064B-25T44C t44c

تكوين الأطراف لـ LC4064B-25T44C (حزمة t44c). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة t44c لـ LC4064B-25T44C

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ LC4064B-25T44C.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

LC4064B-25T44C مناسب لـ 6 التطبيقs: Industrial Control Interface Logic, Data-Acquisition Signal Conditioning, Programmable Communications Interface, Embedded System Glue Logic, Instrumentation and Test Equipment Control, Network Equipment Interface Conditioning.

🏭

Industrial Control Interface Logic

LC4064B-25T44C fits board-level control logic that must adapt to different sensors, actuators, or production configurations without a PCB respin. Its in-system programmable SuperFAST high-density PLD architecture can consolidate decoding, sequencing, interlocks, and status translation, while support for 3.3 V, 2.5 V, and 1.8 V permits connection to mixed-voltage control components. The practical benefit is programmable field adaptation: engineers can revise logic behavior through the configuration path instead of replacing dedicated gate arrays. Before deployment, verify the exact I/O voltage classes, timing, operating-temperature grade, and configuration protocol in the manufacturer datasheet.

🖥️

Data-Acquisition Signal Conditioning

LC4064B-25T44C can implement programmable digital signal conditioning around a data-acquisition front end, including channel selection, trigger logic, sample sequencing, and interface translation. In-system programmability allows one board layout to support multiple acquisition configurations and makes hardware revisions easier during instrumentation development. The 3.3 V, 2.5 V, and 1.8 V operating options are useful when coordinating legacy interface logic with modern processors and converters. Engineers must establish a complete timing budget for acquisition clocks, configure unused pins correctly, and run post-fit timing analysis to confirm that every acquisition-control path meets its required edge margin.

🌐

Programmable Communications Interface

LC4064B-25T44C is suitable for protocol conversion, signal conditioning, and custom interface logic between communication controllers and serial devices. Programmable Boolean and registered functions can bridge bus-width, level, framing, or timing differences without adding a dedicated glue-logic package. Its in-system programming capability supports field configuration updates when interfaces change across product variants. The design should partition the CPLD logic into clearly timed clock domains, apply the manufacturer's input and output constraints, and verify propagation delays against the slowest participating device. This prevents marginal communication errors that may otherwise appear only during temperature or loading changes.

🧩

Embedded System Glue Logic

LC4064B-25T44C can consolidate processor-support functions such as bus arbitration, interrupt decoding, reset coordination, peripheral selection, and interface timing. This is useful when a microcontroller leaves too many discrete logic devices on the board or when board behavior must vary across product configurations. The programmable architecture permits revision through reconfiguration instead of a layout change, while multiple operating voltages support mixed-generation processors and peripherals. Place the device close to the associated signal groups, observe its decoupling requirements, and constrain every synchronous path in the development tool. Also reserve a robust configuration path so production programming and field upgrades remain possible.

🔧

Instrumentation and Test Equipment Control

LC4064B-25T44C can provide programmable sequencing, mode control, and status decoding in laboratory and test equipment where front-panel behavior or internal routing changes frequently. A single programmable device can replace several fixed counter, decoder, and interlock circuits, reducing board area and simplifying configuration reuse. In-system programming allows firmware-driven or manufacturing-test updates to alter control sequences without replacing hardware. For reliable operation, the timing analysis should cover the slowest measurement-control path, unused inputs should be assigned deterministically, and programming or reconfiguration activities should be isolated from acquisition-critical timing unless the architecture explicitly supports concurrent operation.

🌐

Network Equipment Interface Conditioning

LC4064B-25T44C can implement interface retiming, status aggregation, and protocol-aware logic around network controllers in routers, switches, and industrial gateways. Programmable logic is particularly useful when traffic indicators, management signals, or connector-level controls require flexible implementation across multiple hardware variants. The 3.3 V, 2.5 V, and 1.8 V operating support helps bridge mixed-voltage logic domains without committing every function to a new processor redesign. For high-speed links, keep the CPLD logic within the manufacturer timing limits, minimize long unrouted branches, and use controlled clocking and registered boundaries to prevent unnecessary jitter or setup-time violations.

Where can I buy LC4064B-25T44C online?
LC4064B-25T44C can be requested through the Request a Quote form on this page. The form is the appropriate route for checking current unit availability, volume pricing, order multiples, and lead time for the exact Lattice Semiconductor Corporation ordering code without substituting another speed grade or package suffix.
What is the price of LC4064B-25T44C?
Current pricing for LC4064B-25T44C should be obtained through the Request a Quote form on this page. Because configuration, volume, and delivery requirements affect commercial terms, the form lets procurement request the exact MPN and receive the applicable commercial response without relying on a stale catalog figure.
What is the lead time for LC4064B-25T44C?
The current lead time for LC4064B-25T44C should be requested through the Request a Quote form on this page. Include the required quantity, date code preference, and intended packaging in the request so the supply response can be matched to the actual production schedule rather than to an unrelated CPLD variant.
Is LC4064B-25T44C in stock?
LC4064B-25T44C availability should be confirmed through the Request a Quote form on this page. A stock confirmation should identify the complete ordering code, including the 25 speed designation and T44C suffix, because other LC4064B speed grades or package configurations are not automatically interchangeable.
What is LC4064B-25T44C?
LC4064B-25T44C is a Lattice Semiconductor Corporation in-system programmable SuperFAST high-density PLD with 3.3 V, 2.5 V, and 1.8 V operating support. Its part number identifies a member of the LC4064B complex programmable logic device family, with 25 as the speed designation and T44C as the ordering suffix.
Which operating voltages does LC4064B-25T44C support?
The LC4064B-25T44C supports 3.3 V, 2.5 V, and 1.8 V operating voltages, according to the Lattice Semiconductor datasheet description. The required core, I/O, and programming-interface voltage limits must still be checked for the individual bank or pin class used in the design.
Where can I download the LC4064B-25T44C datasheet PDF?
The LC4064B-25T44C datasheet can be reached through the manufacturer-document links listed in the source section of this page, including the Lattice Semiconductor PDF hosted by AllDataSheet. Use the manufacturer datasheet for authoritative pin assignments, timing tables, electrical characteristics, package drawings, and programming requirements.
Where can I find the LC4064B-25T44C pinout?
The LC4064B-25T44C pinout is located in the pin-description and package-drawing sections of the Lattice Semiconductor manufacturer datasheet. Use that table when assigning power, ground, configuration, clock, and I/O pins; the T44C ordering suffix alone is not a sufficient substitute for the documented pin map.
What can replace LC4064B-25T44C?
A replacement must match the LC4064B-25T44C footprint, pin functions, supported voltages, configuration method, and system timing behavior. The cross-reference research identifies LC4064ZE-7TN48C as a comparison candidate, but its package and electrical differences must be validated before it can be treated as a true drop-in replacement.
Is LC4064B-25T44C the same as LC4064ZE-7TN48C?
No, LC4064B-25T44C and LC4064ZE-7TN48C are not automatically equivalent. The comparison results identify differences involving package type and device specifications, so a board-level substitution requires proof that the footprint, pinout, voltage support, configuration interface, resource architecture, and timing are interchangeable.
LC4064B-25T44C vs LC4064ZE-7TN48C — which is better for a drop-in design?
LC4064B-25T44C is the preferred choice when an existing design is already qualified around the LC4064B-25T44C architecture and T44C ordering code. LC4064ZE-7TN48C should be considered only after its package, pinout, voltage, and timing differences are shown to preserve the PCB and design intent.
When should I choose LC4064B-25T44C over another CPLD?
Choose LC4064B-25T44C when the design benefits from an in-system programmable SuperFAST high-density PLD supporting 3.3 V, 2.5 V, and 1.8 V and when its documented pinout matches the board. It is less suitable if a replacement cannot meet the original timing, architecture, configuration, or package constraints.
Is LC4064B-25T44C suitable for industrial control logic?
LC4064B-25T44C can be suitable for industrial control logic when its voltage, timing, temperature, and reliability specifications satisfy the system requirements. The manufacturer datasheet should be checked for the exact operating-temperature grade, electrical limits, and package details before the device is approved for production.
What are the key specifications of LC4064B-25T44C?
The principal verified characteristics of LC4064B-25T44C are its in-system programmability, SuperFAST high-density PLD architecture, 3.3 V, 2.5 V, and 1.8 V operating support, 25 speed designation, and T44C ordering suffix. Pin count, I/O count, logic resources, timing limits, and temperature range must be taken from the manufacturer datasheet.
What is the best Lattice equivalent for LC4064B-25T44C?
The best Lattice equivalent is the device whose package drawing, pin names, voltage domains, configuration interface, logic architecture, and timing satisfy the original board constraints. LC4064ZE-7TN48C is a documented comparison candidate, but it is not confirmed here as a drop-in replacement because its package and parameter details differ.

بيانات مرجعية هندسية لـ LC4064B-25T44C — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose LC4064B-25T44C when a design specifically requires the documented 3.3 V, 2.5 V, and 1.8 V operation, in-system programmability, and LC4064B SuperFAST high-density architecture. It is particularly useful for consolidating control, sequencing, interface, and product-variant logic while preserving a configuration path for updates. LC4064ZE-7TN48C is a same-manufacturer comparison candidate, but its LC4064ZE family designation, 7 speed designation, and TQFP-48 package mean that it should not be treated as a drop-in part without pinout, voltage, architecture, configuration, and timing review. For industrial, acquisition, communications, embedded, instrumentation, or network applications, compare the complete manufacturer electrical tables and temperature grade against the final system. If no qualified same-package alternative exists, retain LC4064B-25T44C or redesign the footprint rather than forcing a mechanically similar device.

المقارنة مع البدائل

المعامل هذا المنتج LC4064ZE-7TN48C
Package T44C ordering suffix TQFP-48
Brand Lattice Semiconductor Lattice Semiconductor
Speed Designation 25 7
Logic Architecture LC4064B LC4064ZE

أبرز الفروقات

  • Multi-voltage operating support for mixed-voltage digital systems (مقابلLC4064ZE-7TN48C)
  • In-system programmable SuperFAST high-density architecture (مقابلLC4064ZE-7TN48C)
  • Configuration flexibility for field updates and product variants (مقابلLC4064ZE-7TN48C)

ملاحظات التصميم

Use the exact package drawing and land pattern from the Lattice Semiconductor datasheet for the T44C ordering configuration. Place decoupling capacitors close to the device power pins, keep ground-return paths short, and route programming signals away from high-speed clock and data nets. Confirm pin orientation against the package drawing before releasing artwork.

Do not select a nominal LC4064-family substitute solely by matching the number of pins or the product family name. Verify the package, pin names, power domains, configuration interface, supported voltages, and timing constraints for the exact alternative. The LC4064ZE-7TN48C comparison candidate uses a different family designation and ordering suffix, so its suitability requires explicit engineering review.

Create explicit clock-domain boundaries in the CPLD design and constrain all synchronous paths before implementation. Review setup and hold timing, skew, fanout, and external propagation delays for interfaces connected to the 3.3 V, 2.5 V, or 1.8 V domains. Post-fit timing results must be signed off against the worst operating condition expected in the final equipment.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

Compliance status was not stated for the exact ordering code in the product search results and must be confirmed using the manufacturer product documentation.

تم التحقق من البيانات في: 2026-11-14 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

LC4064B-25T44C datasheet LC4064B-25T44C pinout LC4064B-25T44C datasheet pdf LC4064B-25T44C equivalent LC4064B-25T44C replacement LC4064B-25T44C cross reference LC4064B-25T44C vs LC4064ZE-7TN48C LC4064B-25T44C price LC4064B-25T44C stock Lattice LC4064B-25T44C LC4064B-25T44C application circuit LC4064B-25T44C footprint

المكونات والمصطلحات ذات الصلة

Lattice Semiconductor LC4064B-25T44C LC4064B LC4064ZE-7TN48C CPLD complex programmable logic device programmable logic device integrated circuit semiconductor in-system programming SuperFAST high-density PLD 3.3 V 2.5 V 1.8 V TQFP surface-mount package digital logic configuration memory programmable interconnect industrial control data acquisition communications interface instrumentation
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر