LC4064B-25T44C - SuperFAST High-Density CPLD | Lattice
부품 번호: LC4064B-25T44C ✓ 활성LC4064B-25T44C 개요
A complex programmable logic device, or CPLD, is a user-programmable semiconductor that implements digital functions through a configurable logic architecture. CPLDs are positioned between simple programmable logic devices and larger programmable logic arrays. Compared with a fixed-function logic IC, a CPLD allows designers to revise Boolean equations, interface logic, control logic, and product-specific functions without changing the PCB. In-system programming further allows configuration to be loaded or updated through the board-level programming path.
The LC4064B family is described by Lattice as SuperFAST and high-density. Its supported 3.3 V, 2.5 V, and 1.8 V operation makes it relevant to mixed-voltage digital systems where a programmable logic device must operate alongside modern low-voltage processors, programmable controllers, and communication ICs. The 25 designation identifies the device ordering variant associated with the LC4064B-25T44C part number, while exact timing, logic-cell, pin, and package dimensions should be confirmed in the manufacturer datasheet before release.
Technically, the device combines programmable logic blocks, programmable interconnect, input and output structures, and configuration memory. These resources can be assigned to combinational and registered digital functions, allowing the LC4064B to implement control, decoding, glue logic, bus arbitration, interface conditioning, and state-machine functions. In-system programmability supports manufacturing, update, and prototype workflows where logic configuration must be changed independently of the PCB assembly.
Typical uses include industrial control interfaces, data-acquisition modules, instrumentation, embedded system support logic, communications equipment, and general-purpose digital design. The device can be especially useful when several small logic functions must be consolidated into one programmable component or when firmware-controlled field updates require a flexible logic fabric. Designers should verify interface voltage tolerance, edge-rate requirements, output drive, and input thresholds against the specific system before using it with high-speed external buses.
PCB design should follow the exact pin and land-pattern details in the Lattice Semiconductor datasheet. Keep programming signals and configuration data away from sensitive analog or high-speed nets, provide the required decoupling near the device, and include the specified programming interface for field updates. Because logic timing depends on the compiled design, a timing-constrained post-fit simulation is essential before hardware release.
This page combines the verified product identity, programming-voltage context, package and ordering information, sourcing guidance, and engineering guidance for evaluating the LC4064B-25T44C. Exact electrical limits, pin functions, resource counts, timing tables, and lifecycle status should be selected from the manufacturer datasheet and official product documentation rather than inferred from the ordering code.
드롭인 대체품: LC4064B-25T44C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
LC4064ZE-7TN48C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LC4064B-25T44C 최대 정격 & 전기적 특성
| Product Type | In-System Programmable SuperFAST High-Density PLD |
| Manufacturer | Lattice Semiconductor Corporation |
| Supported Supply Voltage | 3.3 V, 2.5 V, and 1.8 V |
| Programming Type | In-System Programmable |
| Speed Designation | 25 |
| Package Suffix | T44C |
| Device Architecture | CPLD |
| 실장 유형 | Surface mount |
LC4064B-25T44C t44c 핀 구성 가이드
LC4064B-25T44C(t44c 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: LC4064B-25T44C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
LC4064B-25T44C 적합 용도: 6 애플리케이션s: Industrial Control Interface Logic, Data-Acquisition Signal Conditioning, Programmable Communications Interface, Embedded System Glue Logic, Instrumentation and Test Equipment Control, Network Equipment Interface Conditioning.
Industrial Control Interface Logic
LC4064B-25T44C fits board-level control logic that must adapt to different sensors, actuators, or production configurations without a PCB respin. Its in-system programmable SuperFAST high-density PLD architecture can consolidate decoding, sequencing, interlocks, and status translation, while support for 3.3 V, 2.5 V, and 1.8 V permits connection to mixed-voltage control components. The practical benefit is programmable field adaptation: engineers can revise logic behavior through the configuration path instead of replacing dedicated gate arrays. Before deployment, verify the exact I/O voltage classes, timing, operating-temperature grade, and configuration protocol in the manufacturer datasheet.
추천
Data-Acquisition Signal Conditioning
LC4064B-25T44C can implement programmable digital signal conditioning around a data-acquisition front end, including channel selection, trigger logic, sample sequencing, and interface translation. In-system programmability allows one board layout to support multiple acquisition configurations and makes hardware revisions easier during instrumentation development. The 3.3 V, 2.5 V, and 1.8 V operating options are useful when coordinating legacy interface logic with modern processors and converters. Engineers must establish a complete timing budget for acquisition clocks, configure unused pins correctly, and run post-fit timing analysis to confirm that every acquisition-control path meets its required edge margin.
추천
Programmable Communications Interface
LC4064B-25T44C is suitable for protocol conversion, signal conditioning, and custom interface logic between communication controllers and serial devices. Programmable Boolean and registered functions can bridge bus-width, level, framing, or timing differences without adding a dedicated glue-logic package. Its in-system programming capability supports field configuration updates when interfaces change across product variants. The design should partition the CPLD logic into clearly timed clock domains, apply the manufacturer's input and output constraints, and verify propagation delays against the slowest participating device. This prevents marginal communication errors that may otherwise appear only during temperature or loading changes.
추천
Embedded System Glue Logic
LC4064B-25T44C can consolidate processor-support functions such as bus arbitration, interrupt decoding, reset coordination, peripheral selection, and interface timing. This is useful when a microcontroller leaves too many discrete logic devices on the board or when board behavior must vary across product configurations. The programmable architecture permits revision through reconfiguration instead of a layout change, while multiple operating voltages support mixed-generation processors and peripherals. Place the device close to the associated signal groups, observe its decoupling requirements, and constrain every synchronous path in the development tool. Also reserve a robust configuration path so production programming and field upgrades remain possible.
추천
Instrumentation and Test Equipment Control
LC4064B-25T44C can provide programmable sequencing, mode control, and status decoding in laboratory and test equipment where front-panel behavior or internal routing changes frequently. A single programmable device can replace several fixed counter, decoder, and interlock circuits, reducing board area and simplifying configuration reuse. In-system programming allows firmware-driven or manufacturing-test updates to alter control sequences without replacing hardware. For reliable operation, the timing analysis should cover the slowest measurement-control path, unused inputs should be assigned deterministically, and programming or reconfiguration activities should be isolated from acquisition-critical timing unless the architecture explicitly supports concurrent operation.
추천
Network Equipment Interface Conditioning
LC4064B-25T44C can implement interface retiming, status aggregation, and protocol-aware logic around network controllers in routers, switches, and industrial gateways. Programmable logic is particularly useful when traffic indicators, management signals, or connector-level controls require flexible implementation across multiple hardware variants. The 3.3 V, 2.5 V, and 1.8 V operating support helps bridge mixed-voltage logic domains without committing every function to a new processor redesign. For high-speed links, keep the CPLD logic within the manufacturer timing limits, minimize long unrouted branches, and use controlled clocking and registered boundaries to prevent unnecessary jitter or setup-time violations.
추천
추천 제품 요약
엔지니어링 참조 데이터: LC4064B-25T44C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LC4064ZE-7TN48C |
|---|---|---|
| Package | T44C ordering suffix | TQFP-48 |
| Brand | Lattice Semiconductor | Lattice Semiconductor |
| Speed Designation | 25 | 7 |
| Logic Architecture | LC4064B | LC4064ZE |
주요 차별점
- Multi-voltage operating support for mixed-voltage digital systems (vs LC4064ZE-7TN48C)
- In-system programmable SuperFAST high-density architecture (vs LC4064ZE-7TN48C)
- Configuration flexibility for field updates and product variants (vs LC4064ZE-7TN48C)
설계 노트
Use the exact package drawing and land pattern from the Lattice Semiconductor datasheet for the T44C ordering configuration. Place decoupling capacitors close to the device power pins, keep ground-return paths short, and route programming signals away from high-speed clock and data nets. Confirm pin orientation against the package drawing before releasing artwork.
Do not select a nominal LC4064-family substitute solely by matching the number of pins or the product family name. Verify the package, pin names, power domains, configuration interface, supported voltages, and timing constraints for the exact alternative. The LC4064ZE-7TN48C comparison candidate uses a different family designation and ordering suffix, so its suitability requires explicit engineering review.
Create explicit clock-domain boundaries in the CPLD design and constrain all synchronous paths before implementation. Review setup and hold timing, skew, fanout, and external propagation delays for interfaces connected to the 3.3 V, 2.5 V, or 1.8 V domains. Post-fit timing results must be signed off against the worst operating condition expected in the final equipment.
규정 준수 정보
Compliance status was not stated for the exact ordering code in the product search results and must be confirmed using the manufacturer product documentation.