onsemi

LM2902SNG - Quad General-Purpose Op Amp | onsemi

MPN: LM2902SNG ✓ نشط
14-PDIP Package
الحد الأدنى للطلب: 1 |

LM2902SNG نظرة عامة

The onsemi LM2902SNG is a standard general-purpose quad operational amplifier integrated circuit packaged in a 14-pin plastic dual-inline package. The device contains four amplifier sections, allowing multiple analog signal-conditioning functions to be placed in one package. The verified product description identifies the LM2902SNG as a 4-circuit, 14-PDIP instrumentation, operational-amplifier, and buffer-amplifier device. The LM2902 family is commonly used where a low-cost, general-purpose voltage-feedback amplifier is needed for signal conditioning, buffering, summing, amplification, and basic active-filter implementations.

An operational amplifier is a voltage-gain building block that compares an input signal with a feedback network and drives its output to reduce the difference between the two inputs. The LM2902SNG combines four such amplifier channels in one package, reducing board area and simplifying designs that require multiple analog functions. The 14-PDIP package is suitable for through-hole PCB assembly, prototyping, educational designs, and industrial or instrumentation equipment where a conventional DIP footprint is preferred.

The LM2902SNG is positioned as a standard general-purpose amplifier rather than a precision, low-noise, high-speed, or rail-to-rail amplifier. Design engineers should therefore verify input common-mode range, output swing, supply-voltage limits, input bias current, gain-bandwidth behavior, and output-current capability against the exact electrical characteristics in the manufacturer datasheet before using it in a new design. Its four-channel arrangement can simplify power distribution because several amplifier functions may share the same package and supply rails.

Typical uses include sensor-signal conditioning, low-frequency instrumentation, analog signal buffering, voltage-level translation within suitable common-mode limits, summing amplifiers, and general feedback-control blocks. The DIP package is not the smallest option, but it offers a straightforward assembly method for prototypes and systems where through-hole parts are preferred. Because the LM2902SNG is a quad amplifier, unused amplifier channels should be configured according to the datasheet guidance rather than left with floating inputs.

For robust implementation, follow the manufacturer datasheet for decoupling, input common-mode range, output swing, stability, and compensation requirements. Pay particular attention to input and output signal levels when operating near the supply rails. Decoupling capacitors should be placed close to the supply pins, and each amplifier channel should use a feedback configuration appropriate to the desired gain and bandwidth. This page summarizes the verified product identity, package, and application context while distinguishing confirmed characteristics from parameters that require direct datasheet confirmation.

بدائل مباشرة لـ LM2902SNG — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع LM2902SNG (نفس عامل الشكل والبصمة) — يختلف في Package, Mounting Type, Maximum Supply Voltage, Output Type.

Texas Instruments
Package: 14-SOIC
Mounting Type: Surface mount
Maximum Supply Voltage: 26 V
قارن مع LM2902SNG →
Texas Instruments
Package: 14-SOIC
Mounting Type: Surface mount
Maximum Supply Voltage: 26 V
قارن مع LM2902SNG →
Texas Instruments
Maximum Supply Voltage: 26 V
قارن مع LM2902SNG →
Texas Instruments
Package: 8-pin PDIP
Maximum Supply Voltage: Up to 38 V for LM2903B family
Output Type: Open-collector
قارن مع LM2902SNG →

LM2902D

✅ بديل مباشر
Texas Instruments
📦 14-PDIP
Quad operational amplifier · 4 · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · Push-pull

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LM2902N

✅ بديل مباشر
Texas Instruments
📦 14-PDIP
4 · 26 V · 1 MHz · Quad general-purpose operational amplifier · Independent, high-gain, internally frequency-compensated · Single-supply operation · 14-pin DIP · DIP-14

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LM2902VN

✅ بديل مباشر
onsemi
📦 14-PDIP
Quad (4 independent amplifiers) · General-purpose, single-supply operational amplifier · 3 V to 32 V · ±1.5 V to ±16 V · 3 V to 26 V · 70 dB · 0.5 uA

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LM2903P

✅ بديل مباشر
Texas Instruments
📦 14-PDIP
Dual differential comparator · 2 · Open-collector · Rail-to-rail · 2 V minimum · Up to 38 V for LM2903B family · 0.37 mV for LM2903B family · 3.5 nA for LM2903B family

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LM2902DR

✅ بديل مباشر
Texas Instruments
📦 14-PDIP
Quad operational amplifier · 4 · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · Push-pull

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LM2902SNG الحدود القصوى والخصائص الكهربائية

Product Type Quad operational amplifier
Number of Amplifier Circuits 4 circuits
العلبة 14-PDIP
نوع التركيب Through-hole
Product Classification Standard general-purpose amplifier
Application Category Instrumentation, operational amplifier, buffer amplifier
Manufacturer onsemi

دليل تكوين أطراف LM2902SNG 14-pdip

تكوين الأطراف لـ LM2902SNG (حزمة 14-pdip). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة 14-pdip لـ LM2902SNG

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ LM2902SNG.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

LM2902SNG مناسب لـ 6 التطبيقs: Sensor Signal Conditioning, Low-Frequency Instrumentation, Analog Signal Buffering, Summing Amplifier, Active Filter, Educational and Prototype Circuits.

🏭

Sensor Signal Conditioning

The LM2902SNG is suitable for conditioning low-frequency sensor outputs where four general-purpose amplifier channels provide useful flexibility. One channel can buffer the sensor, another can apply gain through a feedback network, and the remaining channels can perform active filtering or level conditioning. The 14-PDIP package simplifies through-hole assembly in instrumentation prototypes. Before finalizing the circuit, confirm the sensor output range against the input common-mode limits, check the required closed-loop gain against the amplifier's gain-bandwidth behavior, and review offset and bias-current requirements for high-impedance sources.

🔧

Low-Frequency Instrumentation

The LM2902SNG fits instrumentation circuits that require several standard amplifier functions without selecting a precision device. Multiple channels can implement buffering, differential stages, gain control, or active filtering in one DIP package. Its standard general-purpose classification supports conventional analog designs, but the exact performance must be checked in the datasheet for input offset, bias current, output swing, slew rate, and gain-bandwidth product. For instrumentation requiring rail-to-rail operation or very low offset, choose a modern amplifier with those characteristics instead.

📡

Analog Signal Buffering

The four amplifier sections in the LM2902SNG can buffer multiple analog nodes in a control or measurement system. Voltage-follower or gain-stage configurations are useful when driving another circuit requires lower impedance and the source cannot directly provide the required current. Designers should check input and output voltage limits because a general-purpose amplifier is not automatically rail-to-rail. Keep feedback traces short, avoid placing high-impedance inputs next to switching nodes, and use the datasheet's recommended compensation or decoupling arrangements for stable operation.

⚡

Summing Amplifier

A summing-amplifier network can combine several low-frequency analog inputs using one LM2902SNG channel while other channels handle gain, filtering, or output buffering. The quad package reduces the number of amplifier components in a discrete analog board. Select resistor values to keep the closed-loop gain and bandwidth within the device's verified characteristics, and ensure the summed signal remains within the output voltage swing. Check the source impedances because input bias current and offset can create errors when the network uses high resistance values.

🔧

Active Filter

The LM2902SNG can implement multiple first-order or cascaded active-filter stages in analog measurement equipment. Separate channels can provide different filter sections, gain stages, or output isolation while maintaining a common through-hole package strategy. Filter performance depends on the amplifier's gain-bandwidth product, slew rate, output capability, and stability with the selected feedback network, so confirm those characteristics directly in the manufacturer datasheet. Keep the feedback loop compact and observe recommended grounding and supply-decoupling practices.

🧩

Educational and Prototype Circuits

The LM2902SNG is practical for educational and prototype circuits because it combines four general-purpose amplifier channels in a conventional 14-PDIP package that is easy to breadboard and through-hole solder. It can demonstrate voltage followers, summing amplifiers, comparators with positive feedback, oscillators, and simple active filters. Because the verified records do not provide the full electrical limits, students and engineers should consult the manufacturer datasheet before applying large signal amplitudes, unusual loading, or supply voltages outside the device's rated operating region.

What is LM2902SNG?
The onsemi LM2902SNG is a standard general-purpose quad operational amplifier in a 14-PDIP package. It contains four amplifier circuits and is listed for instrumentation, operational-amplifier, and buffer-amplifier applications. The manufacturer datasheet is the appropriate source for exact electrical limits, supply range, gain-bandwidth product, and recommended operating conditions.
How many operational amplifiers are in the LM2902SNG?
The LM2902SNG contains four operational-amplifier circuits in one 14-PDIP package. This arrangement is useful for designs requiring several similar analog functions, such as sensor conditioning, signal buffering, amplification, or summing stages, without using four separate single or dual amplifier packages.
What package does LM2902SNG use?
The LM2902SNG uses a 14-pin plastic dual-inline package, identified in the product listing as 14-PDIP. It is a through-hole package intended for conventional PCB mounting. Confirm the exact mechanical dimensions and pin numbering against the manufacturer datasheet before laying out a board.
Is LM2902SNG suitable for instrumentation applications?
Yes, the LM2902SNG is identified for instrumentation and buffer-amplifier use. Its four channels can support several conditioning functions in one package, including buffering, gain stages, and feedback-based signal processing. Because it is a standard general-purpose amplifier, verify the required common-mode range, accuracy, bandwidth, and output swing in the datasheet.
What are the key specifications engineers should know about LM2902SNG?
The confirmed identity points are four amplifier circuits, a 14-PDIP package, standard general-purpose classification, and instrumentation or buffer-amplifier positioning. Supply voltage, gain bandwidth, input bias current, slew rate, common-mode range, output swing, and temperature limits are not stated in the supplied product records, so consult the manufacturer datasheet before making a performance-critical design decision.
Where can I download the LM2902SNG datasheet PDF?
The LM2902SNG datasheet PDF is available through the onsemi datasheet entry at https://www.datasheets.com/onsemi/lm2902sng. Use the manufacturer datasheet for the authoritative pinout, electrical characteristics, recommended application circuit, and environmental information. The product is also indexed on Octopart at https://octopart.com/datasheet/onsemi/LM2902SNG.
Where can I find the LM2902SNG pinout?
Use the pin-description table in the manufacturer datasheet for the definitive LM2902SNG pinout. The verified product records confirm a 14-PDIP package but do not reproduce individual pin numbers or signal names, so use the datasheet rather than inferring connections from the package outline. The pinout must also be cross-checked against the PCB footprint.
Can LM2902SNG replace LM2902D?
LM2902D is a closely related quad general-purpose operational amplifier listed in the cross-reference results, and it appears to use the same DIP-style package family. Exact replacement suitability still depends on matching the complete orderable suffix, supply limits, electrical characteristics, pinout, and temperature grade. Confirm those details in the manufacturer datasheets before approving it as a drop-in production replacement.
What is the best drop-in replacement for LM2902SNG?
The strongest drop-in candidate identified in the cross-reference results is LM2902D, because it is described as a four-independent, high-gain, frequency-compensated operational amplifier in the same general DIP family. The replacement is not automatically safe for every application: verify pin compatibility, supply voltage, common-mode range, output swing, and operating temperature before substitution.
What can replace LM2902SNG in a general-purpose design?
LM2902D, LM2902N, and LM2902VN are the most relevant general-purpose quad-amplifier candidates appearing in the cross-reference results, while LM2903P is another DIP-style related part. For a true drop-in replacement, confirm the exact pinout and electrical characteristics rather than relying only on the similar quad-amplifier description.
Is LM2902SNG the same as LM2902N?
LM2902SNG and LM2902N are related onsemi designations for the LM2902 family, but the suffix can identify different package, temperature, or qualification options. LM2902SNG is confirmed as a 14-PDIP general-purpose quad amplifier. Compare the orderable part-number documentation, pinout, and electrical tables before deciding whether LM2902N is interchangeable.
When should I choose LM2902SNG over another quad op amp?
Choose LM2902SNG when you need four general-purpose amplifier channels, a straightforward 14-PDIP footprint, and the established LM2902 function. It is appropriate for instrumentation, buffering, and conventional low-frequency analog designs when the datasheet limits fit the application. Consider a modern rail-to-rail amplifier instead when rail-to-rail input or output operation, low offset, low noise, or high speed is essential.
Is LM2902SNG suitable for a sensor signal-conditioning circuit?
The LM2902SNG can fit a sensor signal-conditioning circuit when the sensor output lies within the amplifier's permitted common-mode range and the required gain and bandwidth are supported by its datasheet characteristics. Use one channel for buffering or amplification and the remaining channels for filtering, level conversion, or reference stages. Check input bias current and offset requirements for high-impedance sensors.
Where to buy LM2902SNG online?
Use the Request a Quote form on this page to request LM2902SNG availability, pricing, and lead time for the exact 14-PDIP ordering code. The device is also listed in distributor product records, but XAIPART's quote form is the direct route for a current commercial response without relying on a static price.
What is the price of LM2902SNG?
The current commercial price for LM2902SNG is best requested through the Request a Quote form on this page, because pricing and stock can change with quantity and market conditions. The page does not publish a fixed price in the customer-facing technical content. Provide the required quantity, package, and delivery destination when requesting a quotation.
What is the lead time for LM2902SNG?
Request the current LM2902SNG lead time through the Request a Quote form on this page. Lead time depends on order quantity, inventory, package allocation, and manufacturing conditions, so a current production response is more useful than a static estimate. The verified records confirm the part number and package but do not state a guaranteed lead time.
Is LM2902SNG in stock?
Use the Request a Quote form on this page to check current LM2902SNG stock for your required quantity. Inventory status is time-sensitive and may differ by package, order quantity, and shipment destination. The product records confirm LM2902SNG as a catalogued onsemi 14-PDIP quad operational amplifier.
Does LM2902SNG meet RoHS and automotive requirements?
The verified LM2902SNG records do not state RoHS, REACH, or AEC-Q100 status, so these requirements must be checked against the current manufacturer product documentation before release. A standard general-purpose DIP amplifier should not be treated as automotive-qualified solely from its orderable part number. Request supporting compliance documentation for the exact suffix and shipment configuration.

بيانات مرجعية هندسية لـ LM2902SNG — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose LM2902SNG when the design needs four standard general-purpose amplifier channels in a 14-PDIP package and the application remains within the verified operating limits. It is a practical choice for low-frequency instrumentation, signal buffering, summing, and basic active-filter circuits where through-hole assembly is desirable. Consider LM2902D when you are standardizing on the related DIP quad-amplifier family and have confirmed equivalent electrical characteristics. LM2902N and LM2902VN are useful onsemi family alternatives, but their exact suffix-specific temperature, package, and qualification details must be checked before substitution. LM2902DR provides a cross-manufacturer sourcing option and is described as pin-to-pin compatible, yet it still requires a full datasheet comparison. Use a rail-to-rail precision amplifier instead when low offset, low noise, high speed, or operation close to the supply rails is essential.

المقارنة مع البدائل

المعامل هذا المنتج LM2902D LM2902N LM2902VN LM2903P LM2902DR
Package 14-PDIP 14-PDIP 14-PDIP 14-PDIP 14-PDIP 14-PDIP
Brand onsemi onsemi onsemi onsemi onsemi STMicroelectronics
Amplifier Channels 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

أبرز الفروقات

  • Four general-purpose amplifier channels in one 14-PDIP package (مقابلLM2902D)
  • Direct onsemi family alignment (مقابلLM2902VN)
  • Alternative sourcing across manufacturers (مقابلLM2902DR)

ملاحظات التصميم

Place the LM2902SNG on a through-hole PCB footprint with the pin-1 orientation checked against the DIP package outline and the manufacturer's pin description table. Route each amplifier's feedback components close to their associated pins to minimize parasitic feedback effects. Keep unused channels from floating; configure them according to the datasheet recommendations or bring their inputs to a defined common-mode potential.

Provide local supply decoupling at the DIP power pins and keep the ground connection short and low impedance. The verified records do not state the supply limits, so verify the operating and absolute-maximum voltage ratings before connecting the amplifier. Confirm the signal amplitudes against the common-mode and output-swing limits, particularly when the design depends on approaching either supply rail.

Do not assume rail-to-rail input or output behavior for a standard general-purpose LM2902SNG. The input common-mode range and output voltage swing are not stated in the verified product records and must be checked in the manufacturer datasheet. Also review the required closed-loop gain against the gain-bandwidth product and slew rate before selecting resistor values for high-speed or large-amplitude signals.

The 14-PDIP package generally provides more board area than a small surface-mount amplifier, but actual thermal performance depends on airflow, copper, ambient temperature, and power dissipation. The available records do not provide a thermal-resistance value or maximum supply current, so estimate junction temperature only after those parameters are confirmed. Keep the device within its rated operating temperature and avoid excessive output-current demand.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The verified LM2902SNG records do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Check the current manufacturer documentation for the exact ordering code before making a compliance declaration.

تم التحقق من البيانات في: 2026-11-13 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

LM2902SNG datasheet LM2902SNG specifications LM2902SNG pinout LM2902SNG datasheet pdf onsemi LM2902SNG LM2902SNG 14-PDIP LM2902SNG equivalent LM2902SNG replacement LM2902SNG vs LM2902D LM2902SNG price LM2902SNG stock LM2902SNG signal conditioning

المكونات والمصطلحات ذات الصلة

onsemi LM2902SNG LM2902D LM2902N LM2902VN LM2903P LM2902DR quad operational amplifier general-purpose amplifier voltage-feedback amplifier instrumentation amplifier buffer amplifier analog signal conditioning active filter summing amplifier 14-PDIP DIP package through-hole mounting feedback network input common-mode range gain-bandwidth product slew rate output voltage swing RoHS REACH
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر