LM2902SNG - Quad General-Purpose Op Amp | onsemi
MPN: LM2902SNG ✓ NakahandaLM2902SNG Ulas
An operational amplifier is a voltage-gain building block that compares an input signal with a feedback network and drives its output to reduce the difference between the two inputs. The LM2902SNG combines four such amplifier channels in one package, reducing board area and simplifying designs that require multiple analog functions. The 14-PDIP package is suitable for through-hole PCB assembly, prototyping, educational designs, and industrial or instrumentation equipment where a conventional DIP footprint is preferred.
The LM2902SNG is positioned as a standard general-purpose amplifier rather than a precision, low-noise, high-speed, or rail-to-rail amplifier. Design engineers should therefore verify input common-mode range, output swing, supply-voltage limits, input bias current, gain-bandwidth behavior, and output-current capability against the exact electrical characteristics in the manufacturer datasheet before using it in a new design. Its four-channel arrangement can simplify power distribution because several amplifier functions may share the same package and supply rails.
Typical uses include sensor-signal conditioning, low-frequency instrumentation, analog signal buffering, voltage-level translation within suitable common-mode limits, summing amplifiers, and general feedback-control blocks. The DIP package is not the smallest option, but it offers a straightforward assembly method for prototypes and systems where through-hole parts are preferred. Because the LM2902SNG is a quad amplifier, unused amplifier channels should be configured according to the datasheet guidance rather than left with floating inputs.
For robust implementation, follow the manufacturer datasheet for decoupling, input common-mode range, output swing, stability, and compensation requirements. Pay particular attention to input and output signal levels when operating near the supply rails. Decoupling capacitors should be placed close to the supply pins, and each amplifier channel should use a feedback configuration appropriate to the desired gain and bandwidth. This page summarizes the verified product identity, package, and application context while distinguishing confirmed characteristics from parameters that require direct datasheet confirmation.
Mga alternatibo na pwedeng ilagay na LM2902SNG — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok LM2902SNG (parehas na form factor at footprint) — pagkakaiba sa Package, Mounting Type, Maximum Supply Voltage, Output Type.
LM2902D
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LM2902N
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LM2902VN
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LM2903P
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LM2902DR
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LM2902SNG Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | Quad operational amplifier |
| Number of Amplifier Circuits | 4 circuits |
| Packhaging | 14-PDIP |
| Uri ng Pagpapasok | Through-hole |
| Product Classification | Standard general-purpose amplifier |
| Application Category | Instrumentation, operational amplifier, buffer amplifier |
| Manufacturer | onsemi |
Gabay sa Pin Configuration ng LM2902SNG 14-pdip
Pin configuration para sa LM2902SNG (14-pdip package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa LM2902SNG.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
LM2902SNG ay nararapat para sa 6 aplikasyons: Sensor Signal Conditioning, Low-Frequency Instrumentation, Analog Signal Buffering, Summing Amplifier, Active Filter, Educational and Prototype Circuits.
Sensor Signal Conditioning
The LM2902SNG is suitable for conditioning low-frequency sensor outputs where four general-purpose amplifier channels provide useful flexibility. One channel can buffer the sensor, another can apply gain through a feedback network, and the remaining channels can perform active filtering or level conditioning. The 14-PDIP package simplifies through-hole assembly in instrumentation prototypes. Before finalizing the circuit, confirm the sensor output range against the input common-mode limits, check the required closed-loop gain against the amplifier's gain-bandwidth behavior, and review offset and bias-current requirements for high-impedance sources.
Inirekomenda
Low-Frequency Instrumentation
The LM2902SNG fits instrumentation circuits that require several standard amplifier functions without selecting a precision device. Multiple channels can implement buffering, differential stages, gain control, or active filtering in one DIP package. Its standard general-purpose classification supports conventional analog designs, but the exact performance must be checked in the datasheet for input offset, bias current, output swing, slew rate, and gain-bandwidth product. For instrumentation requiring rail-to-rail operation or very low offset, choose a modern amplifier with those characteristics instead.
Inirekomenda
Analog Signal Buffering
The four amplifier sections in the LM2902SNG can buffer multiple analog nodes in a control or measurement system. Voltage-follower or gain-stage configurations are useful when driving another circuit requires lower impedance and the source cannot directly provide the required current. Designers should check input and output voltage limits because a general-purpose amplifier is not automatically rail-to-rail. Keep feedback traces short, avoid placing high-impedance inputs next to switching nodes, and use the datasheet's recommended compensation or decoupling arrangements for stable operation.
Inirekomenda
Summing Amplifier
A summing-amplifier network can combine several low-frequency analog inputs using one LM2902SNG channel while other channels handle gain, filtering, or output buffering. The quad package reduces the number of amplifier components in a discrete analog board. Select resistor values to keep the closed-loop gain and bandwidth within the device's verified characteristics, and ensure the summed signal remains within the output voltage swing. Check the source impedances because input bias current and offset can create errors when the network uses high resistance values.
Inirekomenda
Active Filter
The LM2902SNG can implement multiple first-order or cascaded active-filter stages in analog measurement equipment. Separate channels can provide different filter sections, gain stages, or output isolation while maintaining a common through-hole package strategy. Filter performance depends on the amplifier's gain-bandwidth product, slew rate, output capability, and stability with the selected feedback network, so confirm those characteristics directly in the manufacturer datasheet. Keep the feedback loop compact and observe recommended grounding and supply-decoupling practices.
Inirekomenda
Educational and Prototype Circuits
The LM2902SNG is practical for educational and prototype circuits because it combines four general-purpose amplifier channels in a conventional 14-PDIP package that is easy to breadboard and through-hole solder. It can demonstrate voltage followers, summing amplifiers, comparators with positive feedback, oscillators, and simple active filters. Because the verified records do not provide the full electrical limits, students and engineers should consult the manufacturer datasheet before applying large signal amplitudes, unusual loading, or supply voltages outside the device's rated operating region.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for LM2902SNG — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | LM2902D | LM2902N | LM2902VN | LM2903P | LM2902DR |
|---|---|---|---|---|---|---|
| Package | 14-PDIP | 14-PDIP | 14-PDIP | 14-PDIP | 14-PDIP | 14-PDIP |
| Brand | onsemi | onsemi | onsemi | onsemi | onsemi | STMicroelectronics |
| Amplifier Channels | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
Pangunahing mga Pagkakaiba
- Four general-purpose amplifier channels in one 14-PDIP package (kumpara saLM2902D)
- Direct onsemi family alignment (kumpara saLM2902VN)
- Alternative sourcing across manufacturers (kumpara saLM2902DR)
Talaan ng Disenyo
Place the LM2902SNG on a through-hole PCB footprint with the pin-1 orientation checked against the DIP package outline and the manufacturer's pin description table. Route each amplifier's feedback components close to their associated pins to minimize parasitic feedback effects. Keep unused channels from floating; configure them according to the datasheet recommendations or bring their inputs to a defined common-mode potential.
Provide local supply decoupling at the DIP power pins and keep the ground connection short and low impedance. The verified records do not state the supply limits, so verify the operating and absolute-maximum voltage ratings before connecting the amplifier. Confirm the signal amplitudes against the common-mode and output-swing limits, particularly when the design depends on approaching either supply rail.
Do not assume rail-to-rail input or output behavior for a standard general-purpose LM2902SNG. The input common-mode range and output voltage swing are not stated in the verified product records and must be checked in the manufacturer datasheet. Also review the required closed-loop gain against the gain-bandwidth product and slew rate before selecting resistor values for high-speed or large-amplitude signals.
The 14-PDIP package generally provides more board area than a small surface-mount amplifier, but actual thermal performance depends on airflow, copper, ambient temperature, and power dissipation. The available records do not provide a thermal-resistance value or maximum supply current, so estimate junction temperature only after those parameters are confirmed. Keep the device within its rated operating temperature and avoid excessive output-current demand.
Impormasyon ng Pagsunod sa Kautusan
The verified LM2902SNG records do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Check the current manufacturer documentation for the exact ordering code before making a compliance declaration.