LM2903AVQDR - 38V Dual Comparator, 0.37mV Offset | Texas Instruments
MPN: LM2903AVQDR ✓ نشطLM2903AVQDR نظرة عامة
A differential comparator is an analog integrated circuit that compares two input voltages and changes its output state according to their polarity. The LM2903 belongs to the comparator hierarchy, where a voltage comparator is an amplifier IC used for threshold detection, level translation, protection, and control-loop signaling. Its two independent channels allow one package to perform two separate comparison functions or to operate as one window-comparator stage.
Key features include a maximum rating of 38 V, a typical input offset voltage of 0.37 mV, input bias current of 3.5 nA, and supply current of 200 µA per comparator. The open-collector outputs can sink useful output current and require an external pull-up resistor, making them suitable for wired logic buses and isolated relay-driving arrangements. The manufacturer also identifies a 2 kV human-body-model ESD rating for the improved LM2903 family.
The A/V qualification of this orderable device combines the enhanced voltage capability associated with the LM2903V family with the 8-SOIC production configuration. The 1 µs response time is useful for threshold monitoring where the system must react quickly but does not require the sub-microsecond delay of a high-speed comparator. Two open-collector channels also allow outputs to be pulled to different logic levels rather than being tied to a fixed internal supply rail.
Typical uses include overvoltage and undervoltage monitoring in industrial power supplies, battery threshold detection, sensor signal conditioning, industrial control inputs, and automotive monitoring systems. In each case, the comparator converts an analog input relationship into a digital indication that can drive a controller, an optocoupler, a relay, or another logic input.
When laying out the circuit, keep the open-collector pull-up resistor close to the relevant output and verify the required sink current. Inputs must remain within the device's permitted common-mode and supply limits, and unused comparator channels should be configured according to the manufacturer's recommended practice rather than left floating. The SOIC thermal pad is not used because this package has eight leads.
This product page combines the manufacturer's family specifications with package, lifecycle, cross-reference, and engineering guidance. It also identifies practical drop-in alternatives and distinguishes exact orderable variants from parts that use a different package or qualification level.
بدائل مباشرة لـ LM2903AVQDR — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع LM2903AVQDR (نفس عامل الشكل والبصمة) — يختلف في Input Bias Current, Input Offset Voltage, Package, Supply Current, Comparator Type.
LM2903QDRQ1
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←LM2903AVQDRQ1
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←LM2903BIDR
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←LM2903VDR2G
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←LM2903VQDRG4Q1
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←LM2903HYDT
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←LM2903AVQDR الحدود القصوى والخصائص الكهربائية
| Comparator Type | Dual differential voltage comparator |
| Number of Channels | 2 channels |
| Maximum Supply Rating | 38 V |
| Comparator Supply Voltage | 32 V |
| Input Offset Voltage | 0.37 mV typical |
| Input Bias Current | 3.5 nA typical |
| تيار التغذية | 200 µA per comparator typical |
| Response Time | 1 µs |
| نوع الخرج | Open-collector |
| ESD Rating | 2 kV HBM |
| نطاق درجة حرارة التشغيل | -40 °C to +125 °C |
| العلبة | 8-pin SOIC, 3.90 mm width |
| نوع التركيب | Surface mount |
| Qualification Version | A/V enhanced LM2903 version |
تكوين أطراف LM2903AVQDR
| دبوس 1 | OUT1 — Open-collector output for comparator channel 1 |
| دبوس 2 | IN1- — Inverting input for comparator channel 1 |
| دبوس 3 | IN1+ — Non-inverting input for comparator channel 1 |
| دبوس 4 | GND — Ground connection |
| دبوس 5 | IN2+ — Non-inverting input for comparator channel 2 |
| دبوس 6 | IN2- — Inverting input for comparator channel 2 |
| دبوس 7 | OUT2 — Open-collector output for comparator channel 2 |
| دبوس 8 | VCC — Positive supply connection |
التطبيقات النموذجية
LM2903AVQDR مناسب لـ 6 التطبيقs: Industrial Overvoltage Monitoring, Battery Threshold Detection, Sensor Signal Conditioning, Automotive Electrical Qualification, Relay and Optocoupler Drive, Communications Threshold Control.
Industrial Overvoltage Monitoring
The LM2903AVQDR suits industrial supply supervision because it combines two independent comparison channels with a 38 V family maximum rating and a -40 °C to +125 °C operating range. Each channel can compare a divided supply signal with a reference, producing an open-collector fault indication for a controller. The 0.37 mV typical input offset helps preserve threshold accuracy, while the 1 µs response time supports prompt fault detection. External pull-up resistors establish the logic-high state, and input dividers must keep every pin within the specified common-mode range.
موصى به
Battery Threshold Detection
The LM2903AVQDR can implement two battery-related threshold checks, such as undervoltage and overvoltage conditions, using independently biased dividers and references. Its dual-channel architecture reduces package count, and the low 3.5 nA typical input bias current helps preserve divider accuracy in high-impedance sensing networks. The open-collector outputs can drive low-power status indicators or control logic. Because battery systems can experience large transients, the design should include appropriate input protection and verify that transient voltages remain below the device's absolute limits.
موصى به
Sensor Signal Conditioning
The LM2903AVQDR is appropriate for converting a sensor-derived analog level into a clean threshold event. Its 0.37 mV typical input offset reduces comparator transition uncertainty, while the 3.5 nA typical input bias current is useful with high-impedance sensor dividers. Two channels can compare a measurement against both upper and lower limits or handle two independent sensors. The 1 µs response supports relatively quick detection, although the open-collector output rise time depends on the external pull-up resistance and total output capacitance.
موصى به
Automotive Electrical Qualification
The LM2903 family is commonly considered for automotive electrical monitoring, and the LM2903AVQDRQ1 provides the explicitly automotive ordering path in the same 8-SOIC footprint. The family supports operation across -40 °C to +125 °C, includes a 2 kV HBM ESD rating, and provides a 38 V maximum rating. An open-collector fault output can interface with a vehicle network or status circuit. Vehicle designs should use the explicitly qualified ordering code and review all AEC-Q100 requirements rather than treating the base LM2903AVQDR as automatically qualified.
موصى به
Relay and Optocoupler Drive
The LM2903AVQDR can act as the decision element preceding a relay driver, optocoupler, or low-voltage logic input. Its open-collector output sinks current when a threshold is exceeded, allowing the pull-up network to select the destination logic level and improve system flexibility. The 1 µs response time is suitable for many control and protection loops, while the low 200 µA per-comparator typical supply current supports low-power operation. Relay flyback protection and the output transistor's current and voltage ratings remain external design requirements.
موصى به
Communications Threshold Control
The LM2903AVQDR can support communications equipment that requires supervision of an analog control level, supply rail, or recovered signal. Two independent channels permit separate assertions for upper and lower thresholds, and the open-collector outputs can be pulled to the logic voltage used by the communications subsystem. The low 0.37 mV typical offset and 3.5 nA bias current are beneficial when precision is needed, while the 1 µs response provides fast event detection. Layout must minimize noise pickup around the high-impedance input nodes and keep pull-up traces away from sensitive analog signals.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ LM2903AVQDR — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | LM2903QDR | LM2903AVQDRQ1 | LM2903BIDR | LM2903HYDT |
|---|---|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | STMicroelectronics |
| Comparator Channels | 2 | 2 | 2 | 2 | 2 |
أبرز الفروقات
- Improved low-offset performance in a widely supported dual-comparator footprint (مقابلLM2903QDR)
- Automotive-qualified path is available without changing the SOIC footprint (مقابلLM2903HYDT)
- Low input bias supports high-impedance sensing networks (مقابلLM2903BIDR)
ملاحظات التصميم
Always place an external pull-up resistor on each open-collector output. The pull-up sets the high-state voltage and must be compatible with the logic family being driven. Calculate its maximum resistance from the required output rise time and total load capacitance, then confirm that the comparator's sink-current limit is not exceeded during a low output. Avoid assuming that an open-collector output can source current.
Route the two differential input pairs as short, matched traces and keep them away from the open-collector output and pull-up nodes. High-impedance input nodes are sensitive to leakage and capacitive coupling, especially when the 3.5 nA typical bias current is combined with a high-value reference divider. Place the input network close to the device, maintain a continuous ground reference, and avoid switching-regulator switch nodes beneath the comparator inputs.
Decouple the supply pin close to the package with a local high-frequency bypass capacitor and provide additional bulk capacitance according to the power-source impedance. The family draws 200 µA per comparator under its typical operating condition, but total supply demand includes both channels and output pull-up current. Check the worst-case pull-up sink load, supply tolerance, transient response, and the comparator's maximum 38 V family rating before selecting protection components.
معلومات الامتثال
The automotive status is confirmed for LM2903AVQDRQ1 rather than assumed for LM2903AVQDR. Individual RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses require confirmation from the current manufacturer documentation or a traceable supplier declaration.