Texas Instruments

LM2903AVQDR - 38V Dual Comparator, 0.37mV Offset | Texas Instruments

MPN: LM2903AVQDR ✓ সক্রিয়
38 V Vdss 3.5 nA typical Id 8-pin SOIC, 3.90 mm width Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

LM2903AVQDR সারাংশ

The Texas Instruments LM2903AVQDR is a dual differential comparator with a 38 V maximum supply rating, 0.37 mV low input offset voltage, 3.5 nA low input bias current, and a 1 µs response time. The device contains two independent open-collector output comparators and is packaged in an 8-pin SOIC. It is designed for general-purpose signal comparison across industrial, automotive, communications, and power-control systems.

A differential comparator is an analog integrated circuit that compares two input voltages and changes its output state according to their polarity. The LM2903 belongs to the comparator hierarchy, where a voltage comparator is an amplifier IC used for threshold detection, level translation, protection, and control-loop signaling. Its two independent channels allow one package to perform two separate comparison functions or to operate as one window-comparator stage.

Key features include a maximum rating of 38 V, a typical input offset voltage of 0.37 mV, input bias current of 3.5 nA, and supply current of 200 µA per comparator. The open-collector outputs can sink useful output current and require an external pull-up resistor, making them suitable for wired logic buses and isolated relay-driving arrangements. The manufacturer also identifies a 2 kV human-body-model ESD rating for the improved LM2903 family.

The A/V qualification of this orderable device combines the enhanced voltage capability associated with the LM2903V family with the 8-SOIC production configuration. The 1 µs response time is useful for threshold monitoring where the system must react quickly but does not require the sub-microsecond delay of a high-speed comparator. Two open-collector channels also allow outputs to be pulled to different logic levels rather than being tied to a fixed internal supply rail.

Typical uses include overvoltage and undervoltage monitoring in industrial power supplies, battery threshold detection, sensor signal conditioning, industrial control inputs, and automotive monitoring systems. In each case, the comparator converts an analog input relationship into a digital indication that can drive a controller, an optocoupler, a relay, or another logic input.

When laying out the circuit, keep the open-collector pull-up resistor close to the relevant output and verify the required sink current. Inputs must remain within the device's permitted common-mode and supply limits, and unused comparator channels should be configured according to the manufacturer's recommended practice rather than left floating. The SOIC thermal pad is not used because this package has eight leads.

This product page combines the manufacturer's family specifications with package, lifecycle, cross-reference, and engineering guidance. It also identifies practical drop-in alternatives and distinguishes exact orderable variants from parts that use a different package or qualification level.

এর জন্য ড্রপ-ইন বিকল্প LM2903AVQDR — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible LM2903AVQDR (একই form factor এবং footprint) — পার্থক্য রয়েছে Input Bias Current, Input Offset Voltage, Package, Supply Current, Comparator Type.

Texas Instruments
Input Bias Current: 3.5 nA
Input Offset Voltage: 0.37 mV
Package: 8-pin SOIC (D)
এর সাথে তুলনা করুন LM2903AVQDR →
Texas Instruments
Input Bias Current: 25 nA typical
Input Offset Voltage: 2 mV typical
Package: 8-pin SOIC
এর সাথে তুলনা করুন LM2903AVQDR →

LM2903QDRQ1

✅ ড্রপ-ইন
Texas Instruments
📦 8-pin SOIC
Dual differential comparator · 2 · AEC-Q100 Grade 0 and Grade 1 · 2 V to 36 V · Total supply difference of 2 V to 36 V · 0.4 mA per comparator · 2 mV typical · 25 nA typical

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM2903AVQDRQ1

✅ ড্রপ-ইন
Texas Instruments
📦 8-pin SOIC
Differential, general purpose · 2 · Open-Collector / Open-Drain, Rail-to-Rail · 2 V to 36 V · +/-1 V to +/-18 V · Rail-to-Rail · 0.4 mA per channel (distributor specification listing) · 1.3 us

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM2903BIDR

✅ ড্রপ-ইন
Texas Instruments
📦 8-pin SOIC
Dual differential comparator · 2 channels · Open-collector · 36 V · 2 V · 0.37 mV · 3.5 nA · 200 µA per comparator

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM2903VDR2G

✅ ড্রপ-ইন
onsemi
📦 8-pin SOIC
Dual independent precision voltage comparator · 2 channels · 2 V to 36 V · To ground · ±18 V · As low as 2.0 mV · 1.5 µs · Open-collector

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM2903VQDRG4Q1

✅ ড্রপ-ইন
Texas Instruments
📦 8-pin SOIC
Dual differential voltage comparator · 2 channels · 2 V to 36 V · ±1 V to ±18 V · Open-collector, rail-to-rail · 0.4 mA typical per comparator · 0.3 us · AEC-Q100 Grade 0 and Grade 1

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM2903HYDT

✅ ড্রপ-ইন
STMicroelectronics
📦 8-pin SOIC
Low-power dual differential voltage comparator · 2 channels · 2 V to 36 V · ±1 V to ±18 V · 0.4 mA · 1 mW at 5 V · 25 nA · ±5 nA

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM2903AVQDR সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Comparator Type Dual differential voltage comparator
Number of Channels 2 channels
Maximum Supply Rating 38 V
Comparator Supply Voltage 32 V
Input Offset Voltage 0.37 mV typical
Input Bias Current 3.5 nA typical
সাপ্লাই কারেন্ট 200 µA per comparator typical
Response Time 1 µs
আউটপুট টাইপ Open-collector
ESD Rating 2 kV HBM
অপারেটিং তাপমাত্রার পরিসর -40 °C to +125 °C
প্যাকেজ 8-pin SOIC, 3.90 mm width
মাউন্টিং টাইপ Surface mount
Qualification Version A/V enhanced LM2903 version

LM2903AVQDR পিন কনফিগারেশন

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
পিন 1 OUT1 — Open-collector output for comparator channel 1
পিন 2 IN1- — Inverting input for comparator channel 1
পিন 3 IN1+ — Non-inverting input for comparator channel 1
পিন 4 GND — Ground connection
পিন 5 IN2+ — Non-inverting input for comparator channel 2
পিন 6 IN2- — Inverting input for comparator channel 2
পিন 7 OUT2 — Open-collector output for comparator channel 2
পিন 8 VCC — Positive supply connection

সাধারণ ব্যবহার

LM2903AVQDR এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Overvoltage Monitoring, Battery Threshold Detection, Sensor Signal Conditioning, Automotive Electrical Qualification, Relay and Optocoupler Drive, Communications Threshold Control.

🏭

Industrial Overvoltage Monitoring

The LM2903AVQDR suits industrial supply supervision because it combines two independent comparison channels with a 38 V family maximum rating and a -40 °C to +125 °C operating range. Each channel can compare a divided supply signal with a reference, producing an open-collector fault indication for a controller. The 0.37 mV typical input offset helps preserve threshold accuracy, while the 1 µs response time supports prompt fault detection. External pull-up resistors establish the logic-high state, and input dividers must keep every pin within the specified common-mode range.

⚡

Battery Threshold Detection

The LM2903AVQDR can implement two battery-related threshold checks, such as undervoltage and overvoltage conditions, using independently biased dividers and references. Its dual-channel architecture reduces package count, and the low 3.5 nA typical input bias current helps preserve divider accuracy in high-impedance sensing networks. The open-collector outputs can drive low-power status indicators or control logic. Because battery systems can experience large transients, the design should include appropriate input protection and verify that transient voltages remain below the device's absolute limits.

🧩

Sensor Signal Conditioning

The LM2903AVQDR is appropriate for converting a sensor-derived analog level into a clean threshold event. Its 0.37 mV typical input offset reduces comparator transition uncertainty, while the 3.5 nA typical input bias current is useful with high-impedance sensor dividers. Two channels can compare a measurement against both upper and lower limits or handle two independent sensors. The 1 µs response supports relatively quick detection, although the open-collector output rise time depends on the external pull-up resistance and total output capacitance.

🚗

Automotive Electrical Qualification

The LM2903 family is commonly considered for automotive electrical monitoring, and the LM2903AVQDRQ1 provides the explicitly automotive ordering path in the same 8-SOIC footprint. The family supports operation across -40 °C to +125 °C, includes a 2 kV HBM ESD rating, and provides a 38 V maximum rating. An open-collector fault output can interface with a vehicle network or status circuit. Vehicle designs should use the explicitly qualified ordering code and review all AEC-Q100 requirements rather than treating the base LM2903AVQDR as automatically qualified.

🔧

Relay and Optocoupler Drive

The LM2903AVQDR can act as the decision element preceding a relay driver, optocoupler, or low-voltage logic input. Its open-collector output sinks current when a threshold is exceeded, allowing the pull-up network to select the destination logic level and improve system flexibility. The 1 µs response time is suitable for many control and protection loops, while the low 200 µA per-comparator typical supply current supports low-power operation. Relay flyback protection and the output transistor's current and voltage ratings remain external design requirements.

🌐

Communications Threshold Control

The LM2903AVQDR can support communications equipment that requires supervision of an analog control level, supply rail, or recovered signal. Two independent channels permit separate assertions for upper and lower thresholds, and the open-collector outputs can be pulled to the logic voltage used by the communications subsystem. The low 0.37 mV typical offset and 3.5 nA bias current are beneficial when precision is needed, while the 1 µs response provides fast event detection. Layout must minimize noise pickup around the high-impedance input nodes and keep pull-up traces away from sensitive analog signals.

What is the LM2903AVQDR?
The LM2903AVQDR is a Texas Instruments dual differential voltage comparator with two independent open-collector outputs in an 8-pin SOIC package. According to the manufacturer product page, the improved family provides a maximum rating of 38 V, input offset voltage of 0.37 mV, input bias current of 3.5 nA, supply current of 200 µA per comparator, and a response time of 1 µs. It is intended for general-purpose threshold detection, voltage monitoring, signal conditioning, and control applications.
What is the operating voltage of LM2903AVQDR?
The LM2903AVQDR supports comparator operation up to a 32 V supply, while the improved LM2903 family carries a 38 V maximum rating. Texas Instruments identifies the device as a dual differential comparator with rail-to-rail input capability and open-collector outputs. Exact minimum, typical, and maximum supply limits should be confirmed against the manufacturer datasheet for the operating conditions of the design, particularly when transient overshoot may be present.
Where can I download the LM2903AVQDR datasheet PDF?
The official LM2903AVQDR documentation is available through the Texas Instruments LM2903 product page, which provides family parameters, ordering information, quality information, and datasheet access. The distributor result for LM2903AVQDR also links directly to the manufacturer documentation. Use the manufacturer document for the definitive pin description, recommended operating conditions, electrical characteristics, and application guidance for this exact orderable suffix.
Where is the LM2903AVQDR pinout located?
The LM2903AVQDR pinout is identified in the Texas Instruments LM2903 datasheet and corresponds to the standard 8-pin SOIC comparator arrangement. The device has two differential inputs for each channel, one output per channel, a supply connection, and ground. Use the manufacturer pin-description table when assigning PCB tracks, especially because the exposed thermal pad is not part of the eight-lead SOIC package.
How fast is the LM2903AVQDR comparator?
The LM2903AVQDR has a manufacturer-stated response time of 1 µs. According to the Texas Instruments LM2903 family information, this improved specification supports faster transitions than older LM2903 variants while retaining the open-collector architecture. Actual end-to-end propagation time depends on input overdrive, common-mode voltage, supply voltage, output pull-up resistance, and output load capacitance.
Does the LM2903AVQDR need an output pull-up resistor?
Yes, each LM2903AVQDR open-collector output requires an external pull-up resistor to establish the high output state. The collector can sink current when the comparison result is active, while the pull-up determines the high voltage and the output rise time. Select the resistor to balance sink-current capability against rise time and power dissipation, and account for the additional loading introduced by the pull-up network.
LM2903AVQDR vs LM2903QDR — which is better?
The LM2903AVQDR is the A/V enhanced orderable version, while LM2903QDR is the standard family ordering code. Texas Instruments describes the improved LM2903B and LM2903V families as drop-in replacements for earlier LM2903 versions with lower offset voltage, lower input bias current, lower supply current, higher supply-voltage capability, and a 1 µs response time. Verify ordering suffixes and grade requirements against the manufacturer's current part table before approving a substitution.
Can LM2903AVQDR be used in automotive systems?
The LM2903AVQDR is suitable for applications requiring the commercial A/V ordering path, while an explicitly automotive-qualified orderable variant should be selected when AEC-Q100 qualification is mandatory. The LM2903AVQDRQ1 is identified by Texas Instruments as the next-generation automotive family member with improved offset, supply-voltage capability, supply current, input bias current, propagation delay, and 2 kV ESD performance. Project qualification requirements must be checked rather than inferred from the base function.
What is the best drop-in replacement for LM2903AVQDR?
The closest drop-in choices are pin-compatible 8-SOIC orderables from the LM2903 family, with LM2903AVQDRQ1 and LM2903BIDR providing the most direct qualification and feature distinctions. A valid replacement must match the SOIC footprint and pin assignment while satisfying the required supply voltage, common-mode range, output-current, temperature, and qualification limits. LM2903HYDT from STMicroelectronics is another SOIC-8 option, but its exact automotive and electrical requirements should be reviewed before substitution.
Is LM2903HYDT a drop-in replacement for LM2903AVQDR?
LM2903HYDT is a functional drop-in candidate because both devices are dual comparators in an 8-pin SOP/SOIC package, but final qualification requires a detailed pin and characteristic review. The comparison data identifies the STMicroelectronics device as a low-power dual voltage comparator in SOP8, while the Texas Instruments device has a 38 V family maximum rating, 0.37 mV offset, 3.5 nA bias current, and 1 µs response time. Confirm open-collector behavior and all application limits before substitution.
When should I choose LM2903AVQDR over an alternative?
Choose LM2903AVQDR when the design needs two independent open-collector comparison channels, a low 0.37 mV typical input offset, low 3.5 nA typical input bias current, and a 1 µs response time in an 8-pin SOIC. The A/V orderable provides a direct option within the TI LM2903 family without changing the footprint. Select a Q1 orderable when automotive qualification is required or a non-TI equivalent when sourcing diversification is more important than family continuity.
Is LM2903AVQDR suitable for industrial voltage monitoring?
The LM2903AVQDR is well suited to industrial voltage-monitoring functions because it combines two comparison channels, a 38 V family maximum rating, low input offset, and open-collector outputs. The operating range of -40 °C to +125 °C supports demanding equipment. Ensure the monitored voltages remain within the common-mode limits, provide an appropriate pull-up for the logic system, and consider transient protection when the input source exceeds the comparator's absolute ratings.
Where can I buy LM2903AVQDR and check its lead time?
Use the Request a Quote form on this page to request LM2903AVQDR pricing, current stock, minimum order quantity, and production lead time. The form is the appropriate channel for a firm quote tied to the exact 8-pin SOIC orderable and its delivery requirements. Include your target quantity, reel or tray preference, date code requirement, and destination country so the commercial response reflects the actual procurement need.
How much does LM2903AVQDR cost?
The current commercial price of LM2903AVQDR should be obtained through the Request a Quote form on this page because pricing and availability can change with quantity, date code, packaging, and market conditions. Submit the exact MPN and required quantity to receive a current quotation for the 8-pin SOIC device. No fixed price should be inferred from historical catalog figures when preparing a new production BOM.
Is LM2903AVQDR currently in stock?
Current LM2903AVQDR stock status should be confirmed through the Request a Quote form on this page. Include the required quantity, target delivery date, and acceptable packaging configuration in the request. Texas Instruments lists the LM2903 family as an active product family, but family status does not by itself guarantee every package, suffix, date code, or quantity is immediately available for shipment.
What are the key specifications of LM2903AVQDR that engineers should know?
The key LM2903AVQDR specifications are two independent comparator channels, a 32 V comparator supply, a 38 V family maximum rating, 0.37 mV typical input offset voltage, 3.5 nA typical input bias current, 200 µA typical supply current per comparator, a 1 µs response time, open-collector outputs, and an 8-pin SOIC package. The operating-temperature range is -40 °C to +125 °C. These figures define the core electrical and mechanical envelope for design selection.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LM2903AVQDR — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose LM2903AVQDR for a new 8-pin SOIC design that needs two independent open-collector channels, a 0.37 mV typical offset, 3.5 nA typical input bias current, and a 1 µs response time. LM2903QDR and LM2903BIDR are useful same-brand alternatives when the exact A/V ordering path is unnecessary and the approved family ordering differs. LM2903AVQDRQ1 is preferred when an explicitly automotive-qualified option is required. LM2903VDR2G and LM2903VQDRG4Q1 suit projects selecting an enhanced LM2903V or automotive enhanced-family configuration. LM2903HYDT provides cross-brand sourcing diversity, but its listed 32 V supply rating is 6 V below the 38 V family maximum associated with LM2903AVQDR. For every option, verify the complete pin assignment, common-mode range, output sink current, absolute maximum ratings, temperature range, and qualification requirements before approving a drop-in substitution.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য LM2903QDR LM2903AVQDRQ1 LM2903BIDR LM2903HYDT
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments STMicroelectronics
Comparator Channels 2 2 2 2 2

মূল পার্থক্যসমূহ

  • Improved low-offset performance in a widely supported dual-comparator footprint (বনামLM2903QDR)
  • Automotive-qualified path is available without changing the SOIC footprint (বনামLM2903HYDT)
  • Low input bias supports high-impedance sensing networks (বনামLM2903BIDR)

ডিজাইন নোট

Always place an external pull-up resistor on each open-collector output. The pull-up sets the high-state voltage and must be compatible with the logic family being driven. Calculate its maximum resistance from the required output rise time and total load capacitance, then confirm that the comparator's sink-current limit is not exceeded during a low output. Avoid assuming that an open-collector output can source current.

Route the two differential input pairs as short, matched traces and keep them away from the open-collector output and pull-up nodes. High-impedance input nodes are sensitive to leakage and capacitive coupling, especially when the 3.5 nA typical bias current is combined with a high-value reference divider. Place the input network close to the device, maintain a continuous ground reference, and avoid switching-regulator switch nodes beneath the comparator inputs.

Decouple the supply pin close to the package with a local high-frequency bypass capacitor and provide additional bulk capacitance according to the power-source impedance. The family draws 200 µA per comparator under its typical operating condition, but total supply demand includes both channels and output pull-up current. Check the worst-case pull-up sink load, supply tolerance, transient response, and the comparator's maximum 38 V family rating before selecting protection components.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The automotive status is confirmed for LM2903AVQDRQ1 rather than assumed for LM2903AVQDR. Individual RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses require confirmation from the current manufacturer documentation or a traceable supplier declaration.

ডেটা যাচাই করা হয়েছে: 2026-11-17 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

LM2903AVQDR LM2903AVQDR datasheet LM2903AVQDR datasheet pdf LM2903AVQDR pinout LM2903AVQDR equivalent LM2903AVQDR replacement LM2903AVQDR vs LM2903HYDT LM2903AVQDR vs LM2903QDR Texas Instruments LM2903AVQDR LM2903AVQDR price LM2903AVQDR stock LM2903AVQDR SOIC8 comparator

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments LM2903AVQDR LM2903 LM2903QDR LM2903AVQDRQ1 LM2903BIDR LM2903VDR2G LM2903VQDRG4Q1 LM2903HYDT STMicroelectronics dual differential comparator voltage comparator amplifier IC semiconductor open-collector output open-drain output input offset voltage input bias current common-mode voltage range response time 8-pin SOIC SOIC package family surface-mount package AEC-Q100 RoHS REACH
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন