onsemi

LM2903IMX - Dual 36V Comparator | onsemi | Industrial

MPN: LM2903IMX ✓ نشط
2 V to 36 V Vdss 800 µA Id 8-SOIC, 3.90 mm width Package
الحد الأدنى للطلب: 1 |

LM2903IMX نظرة عامة

The onsemi LM2903IMX is a dual differential comparator with two independent comparison channels, a 2 V to 36 V single-supply operating range, and an 8-SOIC package. It also supports split supplies up to ±18 V and provides a response time of approximately 1.5 µs. Each channel features open-collector output, allowing the device to pull the output low while external pull-up resistors establish the high logic level.

A voltage comparator is an analog integrated circuit that compares two input voltages and changes its output state when the non-inverting input rises above the inverting input, or vice versa. The LM2903 belongs to the comparator hierarchy within analog ICs and interface ICs. Unlike an operational amplifier, its primary function is threshold switching rather than linear amplification. This distinction makes the LM2903IMX suitable for sensing, protection, control, and digital-interface applications.

The LM2903IMX operates from a single supply as high as 36 V, which supports industrial control systems operating from 24 V rails. Its common-mode input range includes ground, allowing signals close to 0 V to be compared in single-supply systems. Typical supply current is approximately 800 µA, while the 1.5 µs response time supports detection functions that require faster switching than a general-purpose slow comparator.

Both comparison channels operate independently, reducing the component count in designs that require two threshold decisions. The open-collector outputs require pull-up resistors to define the inactive output voltage, but this architecture provides useful system-level flexibility: pull-ups can be connected to a local supply, interface voltage, or pull-up network. Input, output, and supply functions are arranged in a standard 8-SOIC footprint suitable for leaded through-hole assembly.

Typical uses include 24 V industrial sensor interfaces, battery-powered monitoring circuits, overvoltage and undervoltage detection, window-comparator functions, and logic-level translation between open-collector devices. The broad supply range is particularly useful when a comparator must operate directly from an unregulated industrial rail while its output drives a pull-up connected to a lower-voltage logic domain.

Designers should verify the logic thresholds, output sink current, input bias current, and pull-up voltage against the system requirements. Place the pull-up resistor close to the open-collector output, maintain a common ground return between the comparator and sensed circuitry, and avoid exceeding the 36 V maximum supply voltage. The 8-SOIC package is not the smallest option, but it supports straightforward prototyping and hand assembly.

This page combines the LM2903IMX operating limits, pin assignments, drop-in replacement options, application guidance, and design considerations to provide practical information for PCB planning, circuit design, and component selection.

بدائل مباشرة لـ LM2903IMX — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع LM2903IMX (نفس عامل الشكل والبصمة) — يختلف في Package, Input Common-Mode Range, Propagation Delay, Operating Temperature Range, Maximum Supply Voltage.

Texas Instruments
Package: 8-pin SOIC (D)
Input Common-Mode Range: Includes ground; rail-to-rail input per distributor listing
Propagation Delay: 1 µs
قارن مع LM2903IMX →
Texas Instruments
Package: 8-pin SOIC
Propagation Delay: 300 ns response time
Operating Temperature Range: -40 °C to +125 °C
قارن مع LM2903IMX →
Texas Instruments
Package: 8-pin SOIC
Propagation Delay: 1.3 us
Maximum Supply Voltage: 30 V
قارن مع LM2903IMX →
Texas Instruments
Package: 8-pin SOIC (D)
Input Common-Mode Range: Rail-to-rail
Operating Temperature Range: -40°C to 85°C

LM2903D

✅ بديل مباشر
Texas Instruments
📦 8-SOIC
Dual differential comparator · 2 channels · 2 V to 36 V · Open-collector · 300 ns · 8-pin SOIC · Surface mount · -40 °C to +125 °C

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LM2903DRG4

✅ بديل مباشر
Texas Instruments
📦 8-SOIC
Dual differential comparator · 2 · Open-collector · 2 V to 30 V · 30 V · 2 V to 36 V total supply difference · ±38 V · Includes ground

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LM2903MX/NOPB

✅ بديل مباشر
Texas Instruments
📦 8-SOIC
Dual differential comparator · 2 channels · General-purpose comparator · Open-collector · Rail-to-rail · 2.0 mV maximum per comparator

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LM2903AVQDRQ1

✅ بديل مباشر
Texas Instruments
📦 8-SOIC
Differential, general purpose · 2 · Open-Collector / Open-Drain, Rail-to-Rail · 2 V to 36 V · +/-1 V to +/-18 V · Rail-to-Rail · 0.4 mA per channel (distributor specification listing) · 1.3 us

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LM2903BIDR

✅ بديل مباشر
Texas Instruments
📦 8-SOIC
Dual differential comparator · 2 channels · Open-collector · 36 V · 2 V · 0.37 mV · 3.5 nA · 200 µA per comparator

تواصل لمعرفة السعر

عرض ورقة البيانات ←

NJM2903M-

✅ بديل مباشر
📦 8-SOIC
Two-comparator LM2903 function and 36 V class supply capability match the target within 0%; manufacturer-specific ordering and electrical details require review.

📋 بديل مرجعي (غير موجود في الكتالوج)

LM2903IMX الحدود القصوى والخصائص الكهربائية

Comparator Type Dual differential comparator
Number of Comparison Channels 2 channels
Single-Supply Operating Voltage 2 V to 36 V
Dual-Supply Operating Voltage ±1 V to ±18 V
Typical Response Time 1.5 µs
Typical Supply Current 800 µA
نوع الخرج Open-collector
Input Common-Mode Range Includes ground
Number of Inputs 4 differential inputs
عدد المخارج 2 outputs
العلبة 8-SOIC, 3.90 mm width
نوع التركيب Surface mount
Packaging Tape and reel
Logic Compatibility Compatible with TTL and CMOS logic
Single-Supply Comparison Near Ground Supported

تكوين أطراف LM2903IMX

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
دبوس 1 OUT1 — Comparator 1 open-collector output
دبوس 2 IN1- — Comparator 1 inverting input
دبوس 3 IN1+ — Comparator 1 non-inverting input
دبوس 4 GND — Ground connection
دبوس 5 IN2+ — Comparator 2 non-inverting input
دبوس 6 IN2- — Comparator 2 inverting input
دبوس 7 OUT2 — Comparator 2 open-collector output
دبوس 8 VCC — Positive supply connection

التطبيقات النموذجية

LM2903IMX مناسب لـ 6 التطبيقs: Industrial 24V Sensor Interface, Battery-Powered Threshold Detection, Overvoltage and Undervoltage Protection, Window Comparator for Supply Limits, Open-Collector Logic Interface, Automotive and Heavy Equipment Control.

🏭

Industrial 24V Sensor Interface

The LM2903IMX is suited to industrial sensor interfaces that operate from a 24 V control rail. Its single-supply range extends to 36 V, providing 12 V of nominal supply headroom at 24 V, while the common-mode input range includes ground for sensors that produce signals near 0 V. The dual architecture can monitor two independent sensor thresholds without adding another comparator package. The approximately 1.5 µs response time provides quicker switching than a slow general-purpose comparator, while approximately 800 µA typical supply current limits continuous overhead. Because the outputs are open collector, pull-ups can connect to a local 3.3 V or 5 V logic rail, allowing a 24 V sensing circuit to interface directly with lower-voltage digital hardware without tying the output voltage to the input supply.

⚡

Battery-Powered Threshold Detection

LM2903IMX fits battery-powered threshold detection where low quiescent consumption and operation from a single rail are important. Its 2 V minimum supply supports low-energy systems, and the typical supply current of approximately 800 µA provides a defined baseline for battery-life calculations. The common-mode range including ground makes it useful for detecting battery pack limits, charger-state signals, or divided voltages that approach zero. The approximately 1.5 µs response time is useful when the monitored condition changes quickly, although input overdrive affects effective delay. Two independent channels allow the same device to monitor an upper and lower threshold. Designers should calculate the resistor-divider current, comparator input bias effect, pull-up current, and battery leakage together rather than considering only the approximately 800 µA internal supply drain.

🔧

Overvoltage and Undervoltage Protection

The LM2903IMX can implement independent overvoltage and undervoltage protection channels in power-control equipment. Each internal comparator evaluates a divided or scaled input against a reference, while the 2 V to 36 V supply range allows the device to operate from a 24 V bus without requiring a separate low-voltage supply. The approximately 1.5 µs typical response time supports protection against fast transient excursions, subject to the actual sensing network and filter selection. The open-collector outputs can directly pull down a system fault line or latch a logic node through a pull-up resistor. For dependable fault detection, account for comparator offset and input bias current when setting thresholds, and place filtering close to the input when a slow fault signal must be distinguished from a brief disturbance.

📊

Window Comparator for Supply Limits

A window-comparator circuit built with the LM2903IMX can flag a monitored voltage whenever it falls below a lower limit or rises above an upper limit. The device's two independent channels make this arrangement more compact than using two separate comparator ICs. Its single-supply capability reaches 36 V, so a 24 V rail can be monitored directly, while the input common-mode range includes ground for lower rail thresholds. Each open-collector output can be wired to a common fault or alarm node with suitable pull-up resistors, allowing the outputs to combine without tying the interface voltage to the 24 V supply. Practical threshold design should include resistor tolerance, input offset voltage, and temperature effects. Additional filtering may be required if the target rail contains switching ripple that could repeatedly cross a limit.

🌐

Open-Collector Logic Interface

The LM2903IMX can provide an open-collector interface between analog sensing circuitry and digital logic. The pull-up resistor may connect to a 3.3 V, 5 V, or other logic rail independently of the comparator supply, enabling level translation without a dedicated translator IC. According to the manufacturer datasheet, the output arrangement is compatible with TTL and CMOS logic. The approximately 1.5 µs response time gives adequate performance for ordinary control, acknowledgment, and fault signals, while the two channels can handle separate bus-related decisions. Designers should verify the pull-up voltage against the receiving device's input limits, confirm the comparator's output sink capability, and use a resistor value that balances low-voltage logic rise time against power consumption. The 8-SOIC footprint also keeps the interface accessible during prototype assembly.

🚗

Automotive and Heavy Equipment Control

The LM2903IMX can be used in control and protection functions for industrial equipment, while the LM2903AVQDRQ1 provides a qualified alternative where automotive requirements apply. The comparator accepts a single supply up to 36 V and can sense inputs near ground, matching 12 V and 24 V vehicle or machinery electrical systems. Its approximately 1.5 µs response time supports relatively prompt decisions, and the dual configuration provides two thresholds in one 8-SOIC package. Open-collector outputs simplify attachment to 12 V or 24 V fault lines when a pull-up is present. Vehicle or safety-related designs should select the appropriate qualification level, transient protection, grounding strategy, and decoupling rather than relying on the base comparator qualification alone. PCB layout should keep sensing and pull-up loops compact to reduce susceptibility to electrical noise.

What is the operating voltage range of LM2903IMX?
The LM2903IMX operates from 2 V to 36 V on a single supply and can also operate from split supplies ranging from ±1 V to ±18 V. According to the onsemi LM2903 datasheet, the 36 V maximum single-supply rating makes the device suitable for 24 V industrial control systems. The two internal comparator channels share the device supply while operating independently.
How many comparators are inside LM2903IMX?
The LM2903IMX contains two independent differential voltage comparators in an 8-SOIC package. Each channel has its own non-inverting input, inverting input, and open-collector output. According to the manufacturer datasheet, the device can therefore implement two separate threshold decisions without requiring two comparator packages, while still providing independent input and output isolation between channels.
What is the response time of LM2903IMX?
The LM2903IMX has a typical response time of approximately 1.5 µs. According to the onsemi LM2903 datasheet, this switching characteristic is suitable for industrial sensing, protection, and control functions that need to react more quickly than a slow general-purpose comparator. Actual system response also depends on input overdrive, comparator gain, load resistance, and output pull-up capacitance.
Where can I download the LM2903IMX datasheet PDF?
The LM2903IMX datasheet PDF is available through the datasheet link on this page. The document identifies the device as a dual differential comparator and covers the 2 V to 36 V supply range, split-supply operation, pin configuration, input characteristics, output behavior, and typical application circuits. Use the manufacturer pin table when assigning PCB tracks and connector signals.
Where is the LM2903IMX pinout located?
The LM2903IMX pinout is shown in the pin-assignment section of this product page and follows the standard 8-SOIC arrangement. Pins 1 and 7 are the two open-collector outputs, pins 2 and 6 are inverting inputs, pins 3 and 5 are non-inverting inputs, pin 4 is ground, and pin 8 is the positive supply. Confirm the assignment against the manufacturer datasheet before fabrication.
Can LM2903IMX operate from a 24V industrial supply?
Yes, the LM2903IMX can operate directly from a 24 V industrial supply because its single-supply operating range extends to 36 V. According to the manufacturer datasheet, its common-mode input range also includes ground, allowing low-level sensing without a negative supply. The open-collector output can use pull-up resistors connected to the voltage required by the following logic circuit.
Why does LM2903IMX need a pull-up resistor?
The LM2903IMX uses open-collector outputs, so each output requires a pull-up resistor to establish a high voltage when the output transistor is off. The output actively pulls the node low when the comparison condition is met. According to the manufacturer datasheet, this arrangement supports direct interfacing with TTL and CMOS logic and allows the pull-up supply to be selected independently.
Is LM2903IMX suitable for battery-powered systems?
The LM2903IMX can be used in battery-powered systems because its typical supply current is approximately 800 µA and its single-supply operation begins at 2 V. According to the onsemi LM2903 datasheet, the device is designed for low-power supply drain and comparisons near ground. A suitable pull-up resistor should be chosen to minimize static current without producing excessive switching delay.
What is the best drop-in replacement for LM2903IMX?
The TI LM2903D is a strong 8-SOIC drop-in candidate because it provides the same dual-comparator configuration and is described as pin-for-pin compatible with the compared device. According to the TI LM2903 product information, it is a drop-in replacement with the same functionality. Production use should still include review of operating limits, electrical characteristics, and the intended package variant.
Can LM2903D replace LM2903IMX without changing the PCB?
Yes, the LM2903D can serve as an 8-SOIC drop-in replacement for LM2903IMX because both are dual comparators with the same standard pin arrangement. The cross-reference information identifies the parts as pin-for-pin compatible with matching functional characteristics. Review the latest manufacturer datasheets for any operating-condition or qualification differences before approving a production substitution.
When should I choose LM2903IMX over LM2903DRG4?
Choose LM2903IMX when the onsemi device and its specified packaging are the preferred source for the design; choose LM2903DRG4 when that TI SOIC-8 option better matches procurement or qualification requirements. Both devices occupy the same 8-SOIC footprint and implement two comparators. The manufacturer cross-reference indicates functional consistency, but procurement and automotive requirements may still determine the final choice.
What is the difference between LM2903IMX and LM2903AVQDRQ1?
Both parts are dual comparators in an 8-SOIC package, but LM2903AVQDRQ1 is identified as an automotive-qualified option while LM2903IMX is the general-purpose onsemi variant. According to the manufacturer naming information, the Q1 designation denotes automotive qualification. Both can be considered for pin-compatible circuitry, but the required automotive qualification and operating-temperature limits should drive the selection.
What are the key specifications of LM2903IMX that engineers should know?
The LM2903IMX is a dual differential comparator with a 2 V to 36 V single-supply range, split-supply operation to ±18 V, approximately 1.5 µs typical response time, and approximately 800 µA typical supply current. According to the onsemi LM2903 datasheet, it uses open-collector outputs, supports comparisons near ground, and is packaged in 8-SOIC for surface mounting and prototyping.
Where can I buy LM2903IMX and check current availability?
Use the Request a Quote form on this page to ask for LM2903IMX price, stock, minimum order quantity, and current lead time. The form keeps the request tied to the exact LM2903IMX ordering code and its 8-SOIC packaging. Because component availability and commercial terms can change, request an updated quotation rather than relying on a historical catalog price.
How much does LM2903IMX cost and what is its lead time?
Submit the Request a Quote form on this page for the current LM2903IMX price, minimum order quantity, stock status, and lead time. Commercial terms depend on order quantity, packaging, and current channel conditions, so they are not represented as a fixed figure on this page. Include your required delivery date and target reel quantity so the quotation can reflect the actual production need.
Is LM2903IMX currently in stock?
Current LM2903IMX stock should be confirmed through the Request a Quote form on this page. Submit the exact MPN, desired package format, reel quantity, and required delivery date to obtain an availability response for the order. This approach avoids treating a distributor search result as a firm stock commitment for your specific quantity and scheduling requirements.

بيانات مرجعية هندسية لـ LM2903IMX — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose LM2903IMX for general-purpose dual-threshold designs that operate from a single supply up to 36 V, especially 24 V industrial systems, low-level sensing near ground, and open-collector logic interfaces. Its two independent channels, approximately 1.5 µs response time, and approximately 800 µA typical supply current provide a practical balance between speed, channel count, and power use.

Choose LM2903AVQDRQ1 when an automotive-qualified 8-SOIC option is required; choose LM2903D, LM2903DRG4, or LM2903MX/NOPB when TI sourcing is preferable. The 3PEAK LM2903 and NJM2903M-(T1) are additional LM2903-family sourcing candidates, but their exact electrical limits, qualification status, and ordering suffixes should be checked before substitution. Because all listed candidates use the 8-SOIC footprint, PCB changes are generally unnecessary. Nevertheless, verify pin assignments, supply voltage, input common-mode range, output sink current, operating temperature, pull-up requirements, and qualification status before approving any alternative for production.

المقارنة مع البدائل

المعامل هذا المنتج LM2903D LM2903DRG4 LM2903MX/NOPB LM2903AVQDRQ1 LM2903 NJM2903M-(T1)
Brand onsemi Texas Instruments Texas Instruments Texas Instruments Texas Instruments 3PEAK Japan Radio Co.
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Comparator Channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Single-Supply Maximum 36 V 36 V 36 V 36 V 36 V 36 V 36 V
Split-Supply Maximum ±18 V ±18 V ±18 V ±18 V ±18 V ±18 V ±18 V
Output Type Open-collector Open-collector Open-collector Open-collector Open-collector Open-collector Open-collector

أبرز الفروقات

  • High-voltage single-supply operation reduces the need for a separate low-voltage sensing device (مقابلLM2903D)
  • Automotive-qualified option is available in the same functional family and footprint (مقابلLM2903AVQDRQ1)
  • Low-voltage dual comparison supports compact battery and threshold designs (مقابلNJM2903M-(T1))

ملاحظات التصميم

Do not treat the open-collector output as actively driven high. Each output requires a pull-up resistor, and that resistor's supply determines the high output voltage. Confirm that this voltage is valid for the receiving TTL or CMOS input. Also verify the maximum supply remains at or below 36 V, because transient industrial or automotive rails can exceed a nominal 24 V rail even when the steady-state operating voltage is acceptable.

Place each output pull-up resistor close to the corresponding OUT pin and maintain a common ground reference between the comparator, its input divider, and the sensed circuit. Keep the high-impedance input traces short and away from switching nodes. If a monitored rail contains ripple, add filtering at the input rather than relying on the approximately 1.5 µs switching time to reject noise; comparator speed does not prevent false threshold crossings.

Estimated: when the 8-SOIC device operates from 24 V with both outputs sinking 10 mA, the transistor output-path dissipation is approximately 24 V × 0.010 A = 0.24 W, excluding internal supply current. At 36 V and the same 10 mA sink current, estimated output-path dissipation rises to approximately 0.36 W. Use the actual maximum continuous sink current and the manufacturer's thermal data to determine whether copper area or thermal relief is required.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

Compliance attributes were not identified for the exact LM2903IMX ordering code. The LM2903AVQDRQ1 naming identifies an automotive-qualified alternative, but that qualification does not establish the status of LM2903IMX.

عمليات بحث ذات صلة

LM2903IMX datasheet LM2903IMX specifications LM2903IMX pinout LM2903IMX datasheet pdf onsemi LM2903IMX LM2903IMX equivalent LM2903IMX replacement LM2903IMX vs LM2903D LM2903IMX 36V comparator LM2903IMX 8-SOIC pinout LM2903IMX 24V sensor interface LM2903IMX price LM2903IMX stock LM2903IMX open collector output

المكونات والمصطلحات ذات الصلة

onsemi LM2903IMX LM2903 LM2903D LM2903DRG4 LM2903MX/NOPB LM2903AVQDRQ1 3PEAK NJM2903M-(T1) dual differential comparator voltage comparator analog integrated circuit interface IC semiconductor open-collector output single-supply operation split-supply operation common-mode input voltage range supply current response time 8-SOIC SOIC package family surface mount industrial control battery monitoring
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر