Analog Devices

LT1013IN8 - Dual Precision Op Amp, 5V/±15V | Analog Devices

MPN: LT1013IN8 ✓ نشط
Single 5 V or dual ±15 V Vdss 8-pin PDIP Package
الحد الأدنى للطلب: 1 |

LT1013IN8 نظرة عامة

Analog Devices LT1013IN8 is a dual precision operational amplifier designed for 5 V single-supply or ±15 V dual-supply operation, with two amplifier circuits in an 8-pin PDIP package. The device provides a precision amplifier building block for instrumentation, sensor conditioning, active filtering, threshold detection, and low-level signal amplification. Its input-voltage range extends to ground, making it useful in circuits that process signals close to the lower supply rail.

An operational amplifier is an active analog signal-processing component that compares an inverting input with a non-inverting input and amplifies the voltage difference between them. The dual LT1013 belongs to the operational-amplifier hierarchy within analog ICs and linear amplifiers, providing two independent amplifier channels in one package. This integration reduces component count in instrumentation and measurement designs while preserving a conventional 8-pin industry-standard configuration.

The LT1013 is positioned for precision rather than high-speed or high-current applications. Its key benefits include low input offset voltage, low input bias current, low voltage noise, high open-loop gain, and the ability to operate from a single 5 V supply or from ±15 V. Analog Devices identifies battery-powered precision instrumentation, strain-gauge signal conditioners, thermocouple amplifiers, instrumentation-amplifier blocks, 4 mA-to-20 mA current-loop transmitters, multiple limit-threshold detectors, active filters, and multiple gain blocks as representative applications.

The dual architecture places two matched precision amplifier channels in one package. Each channel can be configured as an inverting amplifier, non-inverting amplifier, voltage follower, comparator-like threshold detector, or active-filter section. Input common-mode capability down toward ground is especially useful for sensor outputs that occupy the lower portion of the supply range. The operating-voltage envelope also permits legacy industrial and laboratory equipment to use the same amplifier topology with split supplies.

Typical deployments include bridge-amplifier inputs for strain gauges, low-voltage thermocouple conditioning, precision current-loop receivers, programmable gain blocks, and active analog filters. In a 5 V system, the amplifier can operate from one supply when the signal remains compatible with the input common-mode range. In instrumentation equipment with balanced analog signals, ±15 V operation provides additional headroom around ground and simplifies matching to legacy signal-chain circuitry.

Designers should verify input common-mode voltage, output swing, input bias-current effects, stability with the selected load, and noise performance at the intended signal bandwidth. Decoupling capacitors should be placed close to the supply pins, while sensitive-input routing should minimize leakage and stray capacitance. For source impedances with appreciable resistance, input bias current can create offset error, so resistor values and source resistance should be balanced where practical.

This product page combines the manufacturer application overview with package information, sourcing guidance, pin-level implementation details, and a parameter comparison focused on the LT1013IN8. It is intended to help engineers identify whether this dual precision amplifier, its lead-free ordering code, and its 8-pin PDIP implementation fit an instrumentation or signal-conditioning design.

بدائل مباشرة لـ LT1013IN8 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

LT1013CN8

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 8-pin PDIP
Commercial temperature-grade option in the same 8-pin PDIP configuration; operating-temperature limit differs from the industrial-grade target and must be checked

📋 بديل مرجعي (غير موجود في الكتالوج)

LT1013IN8#PBF

✅ بديل مباشر
📦 8-pin PDIP
Lead-free ordering code with the same electrical function and 8-pin PDIP package; terminal-finish specification differs

📋 بديل مرجعي (غير موجود في الكتالوج)

LT1013ACN8

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 8-pin PDIP
Automotive-grade family option in the same 8-pin PDIP configuration; qualification and temperature coverage differ from the industrial-grade target

📋 بديل مرجعي (غير موجود في الكتالوج)

LT1013BCN8

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 8-pin PDIP
Extended-temperature family option in the same 8-pin PDIP configuration; operating-temperature grade differs from the industrial-grade target

📋 بديل مرجعي (غير موجود في الكتالوج)

LT1013IN8 الحدود القصوى والخصائص الكهربائية

Product Type Dual precision operational amplifier
Number of Amplifier Circuits 2 circuits
Supported Supply Configuration Single 5 V or dual ±15 V
Single-Supply Voltage 5 V
Dual-Supply Voltage ±15 V
Input Common-Mode Capability Extends to ground
العلبة 8-pin PDIP
نوع التركيب Through-hole
Channel Count 2
Application Class General-purpose precision amplifier
Signal Type Analog voltage
Lead-Free Ordering Code LT1013IN8#PBF

تكوين أطراف LT1013IN8

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
دبوس 1 OUT A — Channel A output
دبوس 2 -IN A — Channel A inverting input
دبوس 3 +IN A — Channel A non-inverting input
دبوس 4 V- — Negative supply connection
دبوس 5 +IN B — Channel B non-inverting input
دبوس 6 -IN B — Channel B inverting input
دبوس 7 OUT B — Channel B output
دبوس 8 V+ — Positive supply connection

التطبيقات النموذجية

LT1013IN8 مناسب لـ 6 التطبيقs: Strain-Gauge Signal Conditioning, Thermouple Amplification, 4mA to 20mA Loop Conditioning, Precision Active Filtering, Battery-Powered Instrumentation, Threshold and Limit Detection.

🏭

Strain-Gauge Signal Conditioning

The LT1013IN8 fits strain-gauge bridge front ends because its dual precision channels can amplify small differential sensor signals and the input range extends toward ground. One channel can form the instrumentation gain stage while the other provides gain, buffering, or threshold support. The operating envelope of 5 V single supply or ±15 V dual supply allows the same family to address portable measurement systems and laboratory equipment. Verify bridge excitation voltage, input common-mode limits, input bias-current error, and output swing against the sensor impedance and mechanical measurement range before finalizing resistor values.

🌡️

Thermouple Amplification

The LT1013IN8 is appropriate for low-level thermocouple conditioning because precision operation can support a high-gain amplifier while the input range extends to ground. Two channels permit a differential input stage followed by a second gain or filtering section, reducing the need for separate monolithic devices. The 5 V supply option suits compact battery-powered instrumentation, while ±15 V operation provides useful headroom for laboratory input stages. Confirm cold-junction compensation, polarity, common-mode behavior at the lowest expected thermocouple voltage, input offset, and the bandwidth required for the temperature measurement loop.

⚡

4mA to 20mA Loop Conditioning

The LT1013IN8 can condition industrial current-loop signals using its two precision amplifier channels for amplification, filtering, and active gain stages. The input capability extending toward ground is useful when processing signals referenced close to the lower supply rail, and ±15 V operation suits legacy transmitters and receivers. A practical implementation can use one channel as a transimpedance or difference stage and the other for active filtering or output buffering. Validate the loop input range, isolation boundaries, resistor accuracy, output compliance, noise bandwidth, and protection requirements for the installed transmitter.

🎛️

Precision Active Filtering

The LT1013IN8 can implement precision active filters when the signal bandwidth is modest and component tolerances dominate circuit accuracy. Its two channels allow second-order sections in a continuous-time filter or separate low-pass and high-pass paths, while the choice between 5 V and ±15 V supplies supports different signal ranges. Input bias current, open-loop gain, gain-bandwidth behavior, and output-drive capability determine whether the circuit remains stable with the selected resistor and capacitor values. Simulate the complete filter with realistic tolerances before layout and verify noise performance across the intended measurement bandwidth.

🔋

Battery-Powered Instrumentation

The LT1013IN8 supports compact battery-powered instrumentation because it operates from a 5 V supply and includes two amplifier channels in one 8-pin PDIP package. The dual configuration can reduce board area by combining low-level amplification with a second gain, buffer, or filtering function. Input common-mode capability extending toward ground helps when the sensor output occupies the lower end of the supply range. Establish the complete power budget, including quiescent current and downstream loading, and verify offset, noise, input bias current, output swing, and wake-up behavior across battery voltage and temperature.

📊

Threshold and Limit Detection

The LT1013IN8 is suitable for multiple limit-threshold detection because Analog Devices identifies this function as an LT1013 application and the package contains two independent channels. Each amplifier can compare a sensor signal against a reference, with one channel monitoring an upper limit and the other a lower limit. Precision offset behavior helps reduce threshold error, while the input range extending to ground supports low-level monitoring signals. Confirm input overvoltage protection, reference accuracy, output logic levels, propagation requirements, and whether noise near the threshold requires filtering or hysteresis.

What is the LT1013IN8?
The LT1013IN8 is a dual precision operational amplifier from Analog Devices packaged in an 8-pin PDIP. It contains two amplifier channels and supports both 5 V single-supply and ±15 V dual-supply operation. According to the Analog Devices LT1013 product page, its input-voltage range extends to ground, making it appropriate for precision instrumentation and low-level sensor-conditioning circuits.
What is the LT1013IN8 operating voltage?
The LT1013IN8 operates from a 5 V single supply or from ±15 V supplies. Analog Devices specifies the full performance set for both supply arrangements in the LT1013 datasheet. The ±15 V configuration provides greater headroom for bipolar signals, while 5 V operation supports compact battery-powered and portable instrumentation designs.
Where can I download the LT1013IN8 datasheet PDF?
The LT1013IN8 datasheet and product information are available from the official Analog Devices LT1013 product page at https://www.analog.com/en/products/lt1013.html. The manufacturer page links to the LT1013 data sheet and presents the supported supply configurations, precision specifications, package information, and typical applications for the dual amplifier family.
Where can I find the LT1013IN8 pinout?
The LT1013IN8 uses the conventional 8-pin dual-op-amplifier configuration: channel A output is pin 1, channel B output is pin 7, and the positive supply is pin 8. Use the pin-description table and package drawing in the Analog Devices datasheet to verify orientation, particularly for the PDIP notch and pin-1 marker before assigning PCB connections.
What are the key specifications of LT1013IN8 that engineers should know?
The LT1013IN8 is a dual precision operational amplifier with two channels, 5 V single-supply operation, ±15 V dual-supply operation, and an 8-pin PDIP package. Its input common-mode range extends to ground. Input offset voltage, bias current, noise density, gain-bandwidth product, and temperature limits should be taken from the manufacturer datasheet for the exact ordering option being qualified.
Can LT1013IN8 be used for strain-gauge signal conditioning?
Yes, the LT1013IN8 is suitable for strain-gauge signal conditioning because Analog Devices lists strain-gauge signal conditioners among the LT1013 applications. The two precision channels can support instrumentation stages or active gain blocks around a resistive bridge. Check input bias current, common-mode range, and output swing against the bridge excitation and worst-case sensor imbalance.
Is LT1013IN8 suitable for single 5 V battery-powered instrumentation?
The LT1013IN8 is suitable for 5 V battery-powered precision instrumentation because Analog Devices specifies single 5 V operation and an input range extending to ground. Those characteristics suit low-level sensor signals near ground. Verify the actual signal amplitude, source impedance, output swing, supply-current budget, and noise requirements before fixing the circuit topology.
What is the LT1013IN8 vs LT1013IN8#PBF difference?
The LT1013IN8 and LT1013IN8#PBF denote the same underlying 8-pin PDIP amplifier family, with #PBF identifying the lead-free ordering option. The N8 designation identifies the PDIP package used by both listings. Confirm the exact suffix marked on the device and compare its grade, ordering information, and qualification status with the manufacturer datasheet.
When should I choose LT1013IN8 instead of a dual precision op amp with an 8-pin PDIP package?
Choose the LT1013IN8 when the design needs a dual precision amplifier with input common-mode capability extending toward ground and operation from 5 V or ±15 V. Its two channels suit instrumentation, gain blocks, active filters, and threshold detection. Select another candidate only after verifying pinout, supply range, offset, bias current, noise, bandwidth, and stability against the actual design.
What can replace the LT1013IN8?
A valid LT1013IN8 replacement must be a dual operational amplifier in the same 8-pin PDIP configuration with the same pin assignments, compatible supply range, and acceptable offset, bias-current, noise, and bandwidth behavior. Analog Devices offers related LT1013 ordering codes, but engineers should not assume that every 8-pin dual amplifier is pin-to-pin compatible.
Is LT1013IN8 the same as LT1013CN8?
Both LT1013IN8 and LT1013CN8 are 8-pin PDIP members of the LT1013 dual precision operational-amplifier family, but their temperature-grade suffix can distinguish their intended operating ranges. Use the ordering table in the manufacturer datasheet to confirm the grade, compliance marking, and operating-temperature limits before treating one as a replacement for the other.
What is the best cross-brand equivalent for LT1013IN8?
There is no cross-brand equivalent identified here that can be verified as a true drop-in replacement. A candidate must match the 8-pin PDIP footprint, preserve the two amplifier channels and pin assignments, and meet the required input, output, supply, noise, offset, and bandwidth limits. The Analog Devices cross-reference information should be used to avoid assuming that a standard dual op amp is interchangeable.
Where can I buy LT1013IN8 online?
Use the Request a Quote form on this page to ask for LT1013IN8 availability, current lead time, and order quantities. The part is also associated with an 8-pin PDIP listing under the lead-free LT1013IN8#PBF ordering code. Confirm the exact suffix, including temperature grade and lead-free marking, before releasing a purchase order.
What is the price of LT1013IN8?
Submit the LT1013IN8 request through the Request a Quote form on this page for a current quotation. The form supports exact-suffix confirmation, quantity breaks, packaging requirements, and lead-time questions. Avoid relying on an obsolete catalog figure because pricing, market availability, and lifecycle conditions can change without notice.
What is the lead time and stock status for LT1013IN8?
Request current stock and lead-time confirmation through the Request a Quote form on this page. Stock status should be checked for the exact orderable suffix, including LT1013IN8#PBF when a lead-free marking is required. The manufacturer product page identifies the LT1013 family as an active product offering, while individual inventory and lead time remain purchasing variables.

بيانات مرجعية هندسية لـ LT1013IN8 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the LT1013IN8 for compact precision signal-conditioning systems that require two amplifier channels, operation from 5 V or ±15 V, and an input range extending toward ground. Its 8-pin PDIP package and conventional dual-op-amplifier pin arrangement support through-hole instrumentation and educational designs. Select LT1013IN8#PBF when a lead-free ordering code is required. LT1013CN8 is appropriate when commercial-temperature operation is sufficient, while LT1013ACN8 is relevant to automotive qualification and LT1013BCN8 to extended-temperature requirements. Before replacing an existing amplifier, verify the exact pin assignments, supply limits, input and output ranges, offset voltage, bias current, noise, gain-bandwidth product, stability, and temperature grade. A shared 8-pin package alone does not guarantee functional interchangeability.

المقارنة مع البدائل

المعامل هذا المنتج LT1013CN8 LT1013IN8#PBF LT1013ACN8 LT1013BCN8
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Amplifier Channels 2 2 2 2 2
Product Class Precision operational amplifier Precision operational amplifier Precision operational amplifier Precision operational amplifier Precision operational amplifier
Single-Supply Operation 5 V 5 V 5 V 5 V 5 V
Dual-Supply Operation ±15 V ±15 V ±15 V ±15 V ±15 V
Input Common-Mode Range Extends to ground Extends to ground Extends to ground Extends to ground Extends to ground
Operating Temperature Grade Industrial Commercial Industrial Automotive Extended temperature

أبرز الفروقات

  • Single 5 V and ±15 V operating options (مقابلLT1013CN8)
  • Lead-free ordering compatibility (مقابلLT1013CN8)
  • Input operation extending toward ground (مقابلLT1013ACN8)

ملاحظات التصميم

Check the exact ordering suffix before substituting LT1013IN8, LT1013CN8, LT1013ACN8, or LT1013BCN8. The devices share the 8-pin PDIP format, but commercial, industrial, automotive, and extended-temperature grades have different operating limits. Confirm the pinout against the manufacturer package drawing and verify that the PCB footprint accommodates the PDIP lead spacing and row width.

Place the supply bypass capacitor close to pins 4 and 8 and return its ground connection directly to the analog ground reference. For instrumentation signals, keep input traces short and isolate them from switching nodes and high-current returns. Because source resistance converts input bias current into offset voltage, use practical resistor values and balance impedances where the circuit permits it.

Evaluate output swing at the minimum and maximum supply voltages and the highest operating temperature. A 5 V single-supply circuit does not provide symmetric output range around ground, so choose gain, reference level, and signal centering carefully. In a ±15 V circuit, verify that downstream protection devices and the selected package variant can tolerate the selected supply configuration.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Yes
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The LT1013IN8#PBF ordering code identifies a lead-free finish. RoHS, REACH, halogen-free, and conflict-minerals declarations for the target ordering code require confirmation from the manufacturer product documentation.

تم التحقق من البيانات في: 2026-11-14 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

LT1013IN8 LT1013IN8 datasheet LT1013IN8 datasheet pdf LT1013IN8 pinout LT1013IN8 schematic LT1013IN8 equivalent LT1013IN8 replacement LT1013IN8 vs LT1013CN8 LT1013IN8 8-PDIP LT1013IN8 price LT1013IN8 stock Analog Devices LT1013IN8 LT1013IN8 precision op amp LT1013IN8 instrumentation application

المكونات والمصطلحات ذات الصلة

Analog Devices LT1013IN8 LT1013IN8#PBF LT1013CN8 LT1013ACN8 LT1013BCN8 dual precision operational amplifier precision amplifier operational amplifier analog amplifier linear amplifier integrated circuit semiconductor 8-pin PDIP PDIP package through-hole package single-supply operation dual-supply operation input common-mode voltage input offset voltage input bias current voltage noise density open-loop gain strain-gauge signal conditioner thermocouple amplifier
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر