Analog Devices

LT1077CJ8 - Micropower Precision Op Amp | Analog Devices

MPN: LT1077CJ8 ✓ نشط
5 V Vdss 30x to 60x lower supply current Id 8-pin CERDIP Package
الحد الأدنى للطلب: 1 |

LT1077CJ8 نظرة عامة

The Analog Devices LT1077CJ8 is a micropower precision operational amplifier optimized for 5 V single-supply operation, with additional specifications provided for ±15 V operation. The device is a one-amplifier, 8-pin CERDIP offering a direct replacement path for precision amplifiers such as the OP-07, OP-77, AD707, and LT1001. According to the Analog Devices LT1077 datasheet, the LT1077 reduces supply current by 30 to 60 times compared with those precision amplifiers while retaining externally adjustable offset-voltage nulling.

An operational amplifier is an analog signal-processing IC that compares voltages applied to its inverting and non-inverting inputs and amplifies the difference between them. Precision operational amplifiers form part of the broader amplifier IC hierarchy and are commonly used in instrumentation, measurement, control, and sensor-conditioning circuits. The LT1077 specifically emphasizes low power consumption while retaining precision-oriented operation, making it useful where conventional precision amplifiers would consume too much supply current.

The LT1077's principal features include micropower operation, precision-amplifier architecture, compatibility with single 5 V supply conditions, specified operation under ±15 V conditions, and support for external offset-voltage nulling. The manufacturer identifies direct-replacement compatibility with the OP-07, OP-77, AD707, and LT1001, with supply-current reductions of 30 to 60 times. It is also a direct plug-in replacement for the LT1012 and OP-97, with approximately 10 times lower dissipation.

The technical compromise of this micropower design is important. The Analog Devices LT1077 datasheet states that competing micropower devices can seriously degrade precision, noise, speed, and output-drive specifications. Designers should therefore evaluate those parameters against the actual signal bandwidth, required noise performance, and load capability of the target circuit rather than selecting the amplifier solely from its low supply-current rating. The external nulling connection preserves compatibility with circuits using potentiometer-based offset adjustment.

Typical applications include battery-powered instrumentation, low-power sensor interfaces, portable measurement equipment, precision current-voltage conversion, and analog signal-conditioning stages that operate from a 5 V supply. In these systems, reduced supply current can extend operating time and reduce heat generation. The part can also be used where a previously installed OP-07-family circuit requires a lower-power replacement while retaining the established external offset-nulling arrangement.

PCB design should preserve the manufacturer's recommended bypassing arrangement and keep sensitive input and offset-null connections away from high-current switching paths. Because this is a ceramic dual-inline package, insertion and removal require care to avoid mechanical stress. Before substituting it into an existing design, confirm that the replacement amplifier's operating region, supply polarity, nulling method, and required stability behavior match the original circuit.

This page combines manufacturer-identified replacement relationships, package information, sourcing guidance, and practical migration considerations. It highlights where the LT1077CJ8 provides measurable supply-current or dissipation reductions and where precision, noise, speed, and output-drive requirements must be checked before it is used as a drop-in substitute.

بدائل مباشرة لـ LT1077CJ8 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع LT1077CJ8 (نفس عامل الشكل والبصمة) — يختلف في Amplifier Type, Mounting Type, Package.

Texas Instruments
Amplifier Type: Precision Operational Amplifier
Mounting Type: Surface Mount
Package: 8-SOIC (D), 3.90 mm body width
قارن مع LT1077CJ8 →

LT1077IN8

✅ بديل مباشر
📦 8-pin DIP
Same LT1077 family and pin-compatible 8-pin DIP construction, with the CJ8 ceramic-package qualification no longer applicable; identified supply-current advantage versus OP-07 is 30x to 60x

📋 بديل مرجعي (غير موجود في الكتالوج)

LT1077AMJ8

✅ بديل مباشر
📦 8-pin CERDIP
Same LT1077 precision-amplifier family and 8-pin ceramic-DIP construction, with different ordering, temperature, or qualification characteristics; identified supply-current advantage versus OP-07 is 30x to 60x

📋 بديل مرجعي (غير موجود في الكتالوج)

OP-07

✅ بديل مباشر
📦 8-pin ceramic DIP option
The LT1077 uses 30x to 60x less supply current than the OP-07 while retaining external offset-voltage nulling

📋 بديل مرجعي (غير موجود في الكتالوج)

OP-77

✅ بديل مباشر
📦 8-pin ceramic DIP option
The LT1077 uses 30x to 60x less supply current than the OP-77 while retaining external offset-voltage nulling

📋 بديل مرجعي (غير موجود في الكتالوج)

AD707

✅ بديل مباشر
📦 8-pin ceramic DIP option
The LT1077 uses 30x to 60x less supply current than the AD707 while retaining external offset-voltage nulling

📋 بديل مرجعي (غير موجود في الكتالوج)

LT1001CD

✅ بديل مباشر
Texas Instruments
📦 8-pin ceramic DIP option
Texas Instruments · LT1001CD · Precision Operational Amplifier · 1 · 110 uV · 4 nA · 0.8 MHz · 102 dB

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LT1077CJ8 الحدود القصوى والخصائص الكهربائية

Amplifier Type Micropower precision operational amplifier
Number of Circuits 1 circuit
العلبة 8-pin CERDIP
Single-Supply Optimization 5 V
Additional Supply Specification ±15 V
Supply-Current Reduction versus OP-07, OP-77, AD707, and LT1001 30x to 60x lower supply current
Dissipation Reduction versus LT1012 and OP-97 10x lower dissipation
Offset Nulling External potentiometer compatible
Direct-Replacement Devices OP-07, OP-77, AD707, and LT1001
Direct Plug-In Replacements LT1012 and OP-97
نوع التركيب Through-hole

تكوين أطراف LT1077CJ8

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
دبوس 1 OFFSET NULL — External offset-voltage nulling connection
دبوس 2 IN- — Inverting input
دبوس 3 IN+ — Non-inverting input
دبوس 4 V- — Negative supply connection
دبوس 5 OFFSET NULL — External offset-voltage nulling connection
دبوس 6 OUT — Amplifier output
دبوس 7 V+ — Positive supply connection
دبوس 8 NC — Not connected

التطبيقات النموذجية

LT1077CJ8 مناسب لـ 6 التطبيقs: Battery-Powered Precision Measurement, Low-Power Sensor Signal Conditioning, Portable Current-Voltage Instrumentation, Precision Control Loop Amplifier, Low-Power Data Acquisition Front End, Precision Reference Buffer.

📱

Battery-Powered Precision Measurement

The LT1077CJ8 fits battery-powered measurement systems where a conventional precision amplifier would consume excessive supply current. Its micropower architecture is optimized for 5 V single-supply operation, and Analog Devices reports 30 to 60 times lower supply current than the OP-07, OP-77, AD707, and LT1001. Place the amplifier in the analog signal-conditioning path ahead of an ADC or display, retain the external offset-null arrangement used by the original precision-amplifier circuit, and verify the required noise, bandwidth, and output-drive levels. The principal benefit is longer operating time between battery replacements, although the system designer should still check offset error and signal settling against the measurement accuracy target.

🧩

Low-Power Sensor Signal Conditioning

The LT1077CJ8 is suitable for conditioning weak sensor signals in portable or energy-limited systems when low supply current is more important than maximum amplifier speed. Its 5 V single-supply optimization simplifies power allocation in sensor nodes, while the 30-to-60-times supply-current advantage over the OP-07 family can reduce system energy use. Use the amplifier with the same differential sensing topology and external offset-null method as the circuit being replaced. Check the input bias current, input voltage range, noise density, and settling time against the sensor output because the manufacturer notes that micropower operation can degrade precision, noise, speed, and output-drive specifications. This balance makes the device appropriate for controlled-bandwidth measurement channels rather than unrestricted high-frequency signal paths.

🔧

Portable Current-Voltage Instrumentation

The LT1077CJ8 can serve as the active element in portable current-to-voltage or differential measurement instrumentation designed around a 5 V rail. Its micropower operation helps limit battery drain, and its direct-replacement relationship with established precision amplifiers simplifies schematic review during design transitions. Configure the amplifier with the same external offset-nulling method used by the original circuit so board-level calibration procedures remain applicable. The design must confirm that the selected LT1077 variant provides adequate input bias current, offset voltage, noise, output swing, and output-drive performance for the transducer and ADC interface. Those checks are especially important because the LT1077 datasheet explicitly identifies degraded precision, noise, speed, and output drive as possible consequences of micropower operation.

🏭

Precision Control Loop Amplifier

The LT1077CJ8 is appropriate for precision control and feedback loops that operate at modest bandwidth and prioritize supply efficiency over high slew rate. Its 5 V optimization supports compact control systems, while external offset adjustment preserves the calibration behavior of common precision-amplifier layouts. Use the amplifier as a feedback element around the controlled plant and verify stability, output swing, and loop bandwidth against the manufacturer characteristics before deployment. The 30-to-60-times lower supply current relative to the OP-07, OP-77, AD707, and LT1001 can reduce thermal loading in compact equipment. If the loop requires rapid settling, high output current, or very low noise, compare those requirements carefully because the low-power architecture may not reproduce the performance of a conventional precision amplifier.

📟

Low-Power Data Acquisition Front End

The LT1077CJ8 is useful in the analog front end of a low-power data-acquisition system that uses a 5 V supply. It can amplify a differential sensor or bridge signal before conversion, helping lower the power required by the analog channel when conventional precision amplifiers are unsuitable. Preserve the direct-replacement pin arrangement and external offset-trim pattern of the circuit being upgraded. Verify input common-mode range, output swing, noise, settling time, and drive capability for the selected ADC because the micropower tradeoff can affect dynamic performance. Compared with the OP-07-class devices named by Analog Devices, the LT1077 can reduce supply current by 30 to 60 times, potentially benefiting multi-channel systems in which every analog amplifier contributes to overall power consumption.

⚡

Precision Reference Buffer

The LT1077CJ8 can buffer a low-level reference or drive a precision analog node when the required bandwidth is modest and supply efficiency is important. Its micropower operation reduces the load presented by a 5 V system, and the compatibility with external offset nulling allows calibration practices associated with precision amplifiers to remain in place. Use suitable bypassing at the supply pins and keep the reference path short to avoid adding avoidable instability or noise. The engineer should confirm that the amplifier's input bias current does not disturb the reference source and that its output drive supports the downstream load. Its lower power consumption versus the OP-07, OP-77, AD707, and LT1001 is valuable, but low-noise and fast-settling applications still require a detailed comparison of the dynamic specifications.

ملخص المنتجات الموصى بها

OP-07 Legacy precision amplifier circuit being migrated for lower power consumption يُستخدم في: Battery-Powered Precision Measurement, Portable Current-Voltage Instrumentation, Low-Power Data Acquisition Front End, Precision Reference Buffer AD707 Precision amplifier referenced by the manufacturer as directly replaceable يُستخدم في: Battery-Powered Precision Measurement, Low-Power Sensor Signal Conditioning, Precision Control Loop Amplifier, Low-Power Data Acquisition Front End LT1001 Precision amplifier referenced by the manufacturer as directly replaceable يُستخدم في: Battery-Powered Precision Measurement, Portable Current-Voltage Instrumentation, Low-Power Data Acquisition Front End OP-77 Precision amplifier referenced as directly replaceable by the LT1077 يُستخدم في: Low-Power Sensor Signal Conditioning, Precision Control Loop Amplifier, Precision Reference Buffer
What is the LT1077CJ8?
The LT1077CJ8 is a one-circuit, micropower precision operational amplifier from Analog Devices in an 8-pin CERDIP package. According to the Analog Devices LT1077 datasheet, it is optimized for 5 V single-supply operation while also providing ±15 V specifications. Its principal attraction is substantially lower supply current than conventional precision amplifiers.
Where can I download the LT1077CJ8 datasheet PDF?
The official LT1077 datasheet PDF is available from Analog Devices at the datasheet link on this page. It identifies the micropower precision-amplifier architecture, 5 V single-supply optimization, ±15 V specifications, external offset-nulling compatibility, and direct replacement relationships with the OP-07, OP-77, AD707, LT1001, LT1012, and OP-97.
What is the LT1077CJ8 pinout?
The LT1077CJ8 uses an 8-pin operational-amplifier layout: pin 1 is offset null, pin 2 is the inverting input, pin 3 is the non-inverting input, pin 4 is negative supply, pin 5 is offset null, pin 6 is output, pin 7 is positive supply, and pin 8 is not connected. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks.
What are the key specifications engineers should know about LT1077CJ8?
The LT1077CJ8 is a micropower precision operational amplifier optimized for a 5 V single supply and also specified for ±15 V operation. It is offered in an 8-pin CERDIP package, supports external offset-voltage nulling, and is identified by Analog Devices as a direct replacement for the OP-07, OP-77, AD707, and LT1001 with 30 to 60 times lower supply current.
What can replace the LT1077CJ8?
The closest same-family choices are the LT1077IN8 and LT1077AMJ8, subject to package and environmental requirements. The Analog Devices LT1077 datasheet also identifies the OP-07, OP-77, AD707, and LT1001 as direct-replacement devices, while the LT1012 and OP-97 are direct plug-in alternatives with approximately 10 times lower dissipation. Verify the exact package and temperature grade before substitution.
Is the LT1077CJ8 the same as the OP-07?
No, the LT1077CJ8 is not an identical OP-07, but Analog Devices describes it as pin compatible with and directly replacing the OP-07. The key difference is power demand: the manufacturer states that the LT1077 uses 30 to 60 times less supply current than the OP-07, OP-77, AD707, and LT1001 while retaining externally adjustable offset nulling.
Where can I buy the LT1077CJ8 online?
Use the Request a Quote form on this page to request the LT1077CJ8 and obtain current commercial terms. The form is the appropriate route for unit availability, lot quantity, packaging, lead time, and shipment requirements. Submit the exact 8-pin CERDIP ordering code to avoid a mismatch with other LT1077 package variants.
What is the price of the LT1077CJ8?
Use the Request a Quote form on this page for the current LT1077CJ8 quotation. Commercial conditions can change with quantity, supply status, and requested delivery terms, so a current quote provides the most useful result. Include the exact LT1077CJ8 MPN and required quantity when submitting the request.
What is the lead time for the LT1077CJ8?
Request the current lead time through the Request a Quote form on this page. Lead time depends on the requested quantity and current supplier allocation, and no fixed delivery interval should be assumed without confirmation. State the required quantity, target shipment date, and acceptable packaging requirements with the inquiry.
Is the LT1077CJ8 in stock?
Current stock status should be confirmed through the Request a Quote form on this page. Use the form to request availability for the exact LT1077CJ8 ceramic-DIP ordering code, including the quantity and delivery target. This avoids relying on an outdated catalog status or confusing the CJ8 grade with another LT1077 package.
LT1077CJ8 vs LT1077IN8 — which is better for a new design?
Choose LT1077CJ8 when the design specifically requires the 8-pin CERDIP construction and its associated environmental or packaging characteristics. Choose LT1077IN8 when its package and qualification details better match the production environment. Both belong to the LT1077 micropower precision-amplifier family, but package-specific temperature, mechanical, and procurement requirements should drive the final selection.
LT1077CJ8 vs LT1077AMJ8 — what is the difference?
The LT1077CJ8 and LT1077AMJ8 are LT1077-family precision operational amplifiers with different ordering and qualification characteristics. The CJ8 designation identifies the ceramic-DIP configuration, while the AMJ8 designation applies to another package or grade arrangement. Confirm the exact package dimensions, temperature grade, and military qualification requirements against the manufacturer datasheet before choosing.
When should I choose the LT1077CJ8 over an OP-07?
Choose the LT1077CJ8 when replacing an OP-07 circuit whose accuracy is acceptable but whose supply consumption is too high. Analog Devices reports 30 to 60 times lower supply current for the LT1077 compared with the OP-07, OP-77, AD707, and LT1001. Because micropower operation can trade away precision, noise, speed, or output drive, verify those parameters against the original design requirements.
Is the LT1077CJ8 suitable for battery-powered instrumentation?
The LT1077CJ8 is suitable for battery-powered instrumentation when low supply current is the priority and the amplifier's precision, noise, speed, and output-drive performance meet the signal requirements. Its micropower design is optimized for 5 V single-supply operation, making it suitable for portable measurement systems, sensor interfaces, and low-power analog conditioning stages.
What is the best Analog Devices equivalent for the LT1077CJ8?
The LT1077IN8 is an Analog Devices family alternative for designs that do not specifically require the CJ8 ceramic-DIP package. The LT1077AMJ8 is another family alternative for requirements matching its package and qualification characteristics. The manufacturer also identifies the OP-07, OP-77, AD707, and LT1001 as direct replacements with 30 to 60 times lower supply current, but exact package and specification matching remains essential.

بيانات مرجعية هندسية لـ LT1077CJ8 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the LT1077CJ8 when a legacy precision-amplifier circuit needs lower power consumption while retaining an 8-pin ceramic-DIP format and external offset adjustment. It is especially appropriate for 5 V battery-powered instrumentation, portable measurement equipment, and low-bandwidth sensor interfaces where 30-to-60-times lower supply current than the OP-07, OP-77, AD707, or LT1001 creates meaningful system benefit. Choose LT1077IN8 when a standard DIP package is preferred, and evaluate LT1077AMJ8 when its ordering, temperature, or qualification characteristics fit the design. Retain the original precision amplifier when the application requires the higher noise, speed, precision, or output-drive performance that micropower operation may reduce. For every substitution, verify the package, supply range, offset-null method, noise, bandwidth, stability, and output capability rather than relying on pin compatibility alone.

المقارنة مع البدائل

المعامل هذا المنتج LT1077IN8 LT1077AMJ8 OP-07 OP-77 AD707
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-pin CERDIP 8-pin DIP 8-pin CERDIP 8-pin ceramic DIP option 8-pin ceramic DIP option 8-pin ceramic DIP option
Circuit Count 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit
Product Type Micropower precision operational amplifier Micropower precision operational amplifier Micropower precision operational amplifier Precision operational amplifier Precision operational amplifier Precision operational amplifier
External Offset Nulling Supported Supported Supported Supported Supported Supported
Supply-Current Advantage of LT1077 over Device 30x to 60x lower than OP-07, OP-77, AD707, and LT1001 Same LT1077 micropower approach Same LT1077 micropower approach Reference precision amplifier Reference precision amplifier Reference precision amplifier

أبرز الفروقات

  • Major supply-current reduction over established precision amplifiers (مقابلOP-07)
  • Micropower operation without abandoning precision-amplifier replacement (مقابلOP-77)
  • Direct replacement path for AD707-based instrumentation (مقابلAD707)

ملاحظات التصميم

Do not treat micropower operation as an unconditional substitute for a conventional precision amplifier. The Analog Devices LT1077 datasheet states that micropower performance can seriously degrade precision, noise, speed, and output drive. Before replacing an OP-07, OP-77, AD707, or LT1001, compare offset voltage, bias current, noise, gain-bandwidth product, slew rate, output swing, and drive capability with the original circuit requirements. Use external offset nulling as intended.

Estimate the expected supply-current benefit using the manufacturer's stated 30-to-60-times reduction relative to the OP-07, OP-77, AD707, and LT1001. Apply the selected comparison device's actual supply current and the required operating duty cycle to compare energy use. Also include output-load current and any always-on peripheral current in the calculation, since low amplifier supply current alone does not determine complete system consumption.

Reuse the original precision-amplifier pin arrangement only after confirming the exact package and pin functions. Keep the IN+ and IN- traces short, route offset-null connections away from switching nodes and high-current return paths, and place supply-bypass capacitors close to pins 4 and 7. For the ceramic DIP package, use appropriate insertion tooling and avoid lateral force on the leads to prevent package cracking.

Verify closed-loop stability and settling for the actual load, feedback network, and operating supply. Low power does not guarantee low distortion or fast settling, particularly when driving capacitive inputs or long interconnects. If the application is a precision measurement node, characterize noise and offset after replacement and preserve the original calibration sequence so drift can be separated from component substitution effects.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The LT1077CJ8 is an analog operational amplifier rather than an automotive-qualified device, so AEC-Q100 is recorded as not applicable. No additional compliance conclusion is stated without a manufacturer declaration for this exact ordering code.

تم التحقق من البيانات في: 2026-11-14 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

LT1077CJ8 datasheet LT1077CJ8 pinout LT1077CJ8 datasheet pdf LT1077CJ8 equivalent LT1077CJ8 replacement LT1077CJ8 price LT1077CJ8 stock Analog Devices LT1077CJ8 LT1077CJ8 8 pin CERDIP LT1077CJ8 vs OP-07 LT1077CJ8 micropower amplifier LT1077CJ8 battery powered instrumentation

المكونات والمصطلحات ذات الصلة

Analog Devices LT1077CJ8 LT1077IN8 LT1077AMJ8 OP-07 OP-77 AD707 LT1001 LT1012 OP-97 LT1077 operational amplifier precision operational amplifier micropower amplifier analog signal-conditioning IC 5 V single-supply operation ±15 V operation supply current offset-voltage nulling 8-pin CERDIP dual-inline package through-hole mounting precision measurement sensor signal conditioning
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر