Analog Devices

LT1078ACH - Micropower Dual Precision Op Amp | Analog Devices

MPN: LT1078ACH ✓ نشط
50 µA maximum Vdss 8-pin TO-5 metal can Package
الحد الأدنى للطلب: 1 |

LT1078ACH نظرة عامة

Analog Devices LT1078ACH is a micropower, dual, precision operational amplifier optimized for single-supply operation at 5 V, with the LT1078ACH supplied in an 8-pin TO-5 metal-can package. The device provides two amplifiers, a maximum supply current of 50 µA per amplifier, and operation from a single 5 V rail, while also supporting ±15 V applications.

An operational amplifier is a high-gain, analog signal-conditioning device used in amplification, filtering, comparison, buffering, and feedback-control circuits. Within the electronic-component hierarchy, the LT1078ACH is a dual precision op amp, meaning that one package contains two amplifiers that can perform independent signal-processing tasks. Its micropower operating class makes it suitable for battery-powered instrumentation and low-current analog systems where supply efficiency is more important than high-bandwidth performance.

The principal features of the LT1078ACH include dual-amplifier integration, micropower operation, single-supply optimization at 5 V, and support for ±15 V supplies. The 50 µA maximum supply current per amplifier is particularly important in portable designs because each active amplifier contributes to the circuit's continuous load. The TO-5 metal-can package also provides a mechanically robust enclosure for legacy and industrial instrumentation.

The precision architecture of the LT1078ACH is intended to minimize error in closed-loop analog systems. As a dual amplifier, it can implement two related functions in one package, such as an instrumentation front-end and a buffer, or a filter stage and an output driver. Operating from a single 5 V supply simplifies battery-powered designs, while the ±15 V capability accommodates conventional industrial analog systems. Designers should still account for input common-mode limits, output swing, bias-current effects, and stability requirements when selecting external compensation and resistors.

Typical uses include low-power sensor signal conditioning, precision filtering, battery-operated measurement instruments, low-current transducers, and dual-stage analog signal chains. The device is also appropriate where two matched amplifier functions reduce board area and component count. Because it is a micropower precision amplifier rather than a high-speed amplifier, applications requiring wide bandwidth, high slew rate, or high output-current capability may benefit from a different device family.

For layout, keep input, feedback, compensation, and decoupling paths short to reduce noise pickup and parasitic feedback. Use a local bypass capacitor at the supply pins and confirm common-mode and output-swing limits against the actual signal range. Start-up behavior, input bias current, and output loading must be checked with the system power source rather than assumed to match a generic dual op amp.

بدائل مباشرة لـ LT1078ACH — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

LT1078AH

✅ بديل مباشر
📦 8-pin TO-5 metal can
Same dual micropower architecture and 50 µA maximum supply current per amplifier; operating-grade and temperature details must be confirmed

📋 بديل مرجعي (غير موجود في الكتالوج)

LM10CH/NOPB

✅ بديل مباشر
📦 8-pin TO-5 metal can
Cross-brand precision dual amplifier with the same 8-pin metal-can class; offset, bias-current, and common-mode differences require comparison

📋 بديل مرجعي (غير موجود في الكتالوج)

LT1078ACH الحدود القصوى والخصائص الكهربائية

Amplifier Count 2 amplifiers
Product Type Micropower precision operational amplifier
Supply Current per Amplifier 50 µA maximum
Optimized Supply Voltage 5 V
Supported Supply Range ±15 V
Total Supply Voltage Span 44 V maximum
العلبة 8-pin TO-5 metal can
نوع التركيب Through-hole

دليل تكوين أطراف LT1078ACH 8-pin to-5 metal can

تكوين الأطراف لـ LT1078ACH (حزمة 8-pin to-5 metal can). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة 8-pin to-5 metal can لـ LT1078ACH

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ LT1078ACH.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

LT1078ACH مناسب لـ 6 التطبيقs: Battery-Powered Sensor Signal Conditioning, Precision Low-Frequency Filtering, Low-Power Transducer Interface, Precision Instrumentation Buffer, Low-Current Data Acquisition Front End, Battery-Operated Reference Buffer.

🧩

Battery-Powered Sensor Signal Conditioning

The LT1078ACH fits low-power sensor front ends because each amplifier draws no more than 50 µA and the device is optimized for 5 V single-supply operation. Two amplifiers can provide conditioning and buffering functions without requiring two separate packages. The resulting circuit can amplify weak sensor signals while keeping continuous supply demand low. Designers should account for input bias current, offset voltage, common-mode range, and sensor impedance when selecting external resistors. Stable operation near the supply rails requires confirmation from the manufacturer electrical characteristics rather than an assumption based on generic op-amp behavior.

🌐

Precision Low-Frequency Filtering

The dual precision LT1078ACH can implement active filters, integrators, or buffered gain stages where low supply current is important. Its 50 µA maximum supply current per amplifier reduces the contribution of the active devices to the overall power budget, while two channels allow cascading or parallel signal processing in one package. Stable filter performance depends on the gain, noise gain, component tolerances, and amplifier stability requirements. Use the manufacturer recommended compensation values and verify settling behavior over the intended signal bandwidth. The device is best suited to instrumentation bandwidths rather than high-speed filtering.

🏭

Low-Power Transducer Interface

The LT1078ACH is appropriate for low-level transducer interfaces that require precision amplification and low supply consumption. A single package can implement differential or referenced conditioning stages while operating from a 5 V rail, reducing board area in portable measurement systems. The 50 µA per-amplifier maximum supply current helps extend operating time in battery-powered equipment. Input bias-current effects must be checked against the transducer source impedance, and the common-mode voltage must remain within the manufacturer's permitted range. Output loading and sensor-ground offsets also require careful grounding to avoid degrading measurement accuracy.

🖥️

Precision Instrumentation Buffer

The LT1078ACH can provide input buffering and gain functions in compact analytical or test instruments where supply efficiency matters. Its dual topology supports two buffered channels or a signal-conditioning pair, while the micropower characteristic limits continuous consumption. A metal-can package is mechanically compatible with traditional through-hole instrumentation layouts, although the exact pin orientation must follow the manufacturer drawing. Check input offset, bias current, output swing, and capacitive-load drive before using the amplifier directly with long cables or high-capacitance nodes. Short traces and careful grounding are important when handling low-level laboratory signals.

📺

Low-Current Data Acquisition Front End

The LT1078ACH can amplify and buffer inputs in a low-current data-acquisition channel while its 50 µA maximum supply current per amplifier limits the active-circuit burden. Operating from a single 5 V supply simplifies portable acquisition systems, and the second channel can monitor a reference or provide an additional conditioned output. Signal-chain accuracy still depends on offset and bias-current behavior, which are not interchangeable across precision amplifiers. For multiplexed or long-cable inputs, add suitable protection and isolation as required. Confirm the device's input and output ranges against the converter or sensor architecture before layout release.

⚡

Battery-Operated Reference Buffer

The LT1078ACH can buffer a low-power voltage reference before it drives an ADC, DAC, or resistive sensor network. Its 50 µA maximum supply current per amplifier helps maintain a low overall power budget, and the 5 V single-supply optimization fits many mixed-signal portable systems. Buffering is useful when the source cannot drive the required load without introducing an error. Verify reference accuracy, capacitive loading, output swing, and stability in the actual reference network. The TO-5 package supports through-hole assembly, but pin 1 orientation and the pin functions must be taken directly from the manufacturer package drawing.

ملخص المنتجات الموصى بها

LM10CH/NOPB Cross-brand precision dual op amp for comparative design evaluation يُستخدم في: Battery-Powered Sensor Signal Conditioning, Precision Low-Frequency Filtering, Low-Power Transducer Interface, Precision Instrumentation Buffer, Low-Current Data Acquisition Front End, Battery-Operated Reference Buffer
Where can I download the LT1078ACH datasheet PDF?
The LT1078ACH datasheet and product information are available from the Analog Devices LT1078 product page at https://www.analog.com/en/products/lt1078.html. The document describes the LT1078 as a micropower dual op amp optimized for 5 V single-supply operation, with specifications covering the LT1078 and the related quad LT1079. Use the manufacturer's package, electrical-characteristics, and application sections when assigning pins, selecting bypass capacitors, and confirming operating limits.
What are the key specifications of LT1078ACH that engineers should know?
The LT1078ACH is a dual precision operational amplifier in an 8-pin TO-5 metal-can package. According to the manufacturer datasheet, it is optimized for 5 V single-supply operation, supports ±15 V operation, and draws no more than 50 µA of supply current per amplifier. These characteristics place it in the micropower precision-amplifier class and make the device particularly relevant to battery-powered sensor, measurement, filtering, and buffering systems.
What is the supply current of the LT1078ACH?
The LT1078ACH uses at most 50 µA of supply current per amplifier according to the manufacturer datasheet. Because the package contains two amplifiers, the total circuit supply demand depends on whether both channels are active, their operating conditions, and the selected supply voltage. This low-current characteristic is the principal reason to consider the device for battery-powered and long-life instrumentation rather than conventional high-speed analog designs.
Can the LT1078ACH operate from a single 5 V supply?
Yes, the LT1078ACH is optimized for single-supply operation at 5 V. The manufacturer describes it as a micropower dual precision op amp optimized for 5 V, while also providing ±15 V specifications for dual-supply systems. When designing a single-rail circuit, verify that the input signal and required output remain within the device's common-mode and output-swing limits.
What is the LT1078ACH pinout and package?
The LT1078ACH is packaged as an 8-pin TO-5 metal can and contains two operational amplifiers. The public result content identifies the package as TO-205-8, TO-5-8 metal can, but it does not expose a complete numbered pin description. Assign each amplifier's offset, input, output, supply, and ground connections from the manufacturer pin-configuration table before fabrication, and verify the metal-can orientation against the physical drawing.
Where can I buy LT1078ACH and how do I request a quote?
Use the Request a Quote form on this page to request LT1078ACH availability, current lead time, and a quotation. The product is a cataloged Analog Devices amplifier with an official manufacturer page and an 8-pin TO-5 metal-can package. The quote form is the appropriate route for current commercial terms because pricing and inventory can change with demand, quantity, and market conditions.
What is the price of LT1078ACH?
The current LT1078ACH quotation is handled through the Request a Quote form on this page. The form allows you to state the required quantity and obtain current commercial terms for the exact LT1078ACH ordering code. Because the device is specified as an 8-pin TO-5 metal-can package, include the package suffix in any comparison request to avoid receiving a surface-mount or quad-amplifier alternative.
What is the lead time and stock status for LT1078ACH?
Request current stock status, minimum order quantity, and lead time through the Request a Quote form on this page. Lead time can vary with the exact package, order quantity, and manufacturer inventory position. Do not infer availability from a catalog or historical distributor record; request a firm allocation and delivery schedule for the LT1078ACH before committing the production schedule.
What is the best drop-in replacement for LT1078ACH?
The LT1078AH is the closest same-family option identified because it retains the LT1078 dual micropower precision-amplifier architecture and TO-5-style construction. The LT1078ACH is the ceramic-sealed ordering variant, while grade, temperature coverage, and availability should be confirmed against the manufacturer. Validate the complete pin description, common-mode range, offset, bias current, and supply limits before using any replacement in production.
Can LT1078AH replace LT1078ACH?
The LT1078AH can be evaluated as a same-family replacement for the LT1078ACH because both belong to the micropower dual precision op-amp family and use the same 8-pin metal-can class. The meaningful differences are the ordering grade and associated operating or availability conditions rather than a change in circuit function. Confirm pinout, temperature range, supply limits, offset, and lifecycle status in the manufacturer documentation before substitution.
What can replace LT1078ACH?
The most defensible replacement candidates are the LT1078AH for a same-family dual TO-5 solution and the LM10CH/NOPB for a cross-brand comparison. Neither candidate should be treated as a drop-in substitute without checking the manufacturer pin configuration and electrical limits. In particular, verify common-mode range, output swing, offset voltage, bias current, supply current, and the exact 8-pin metal-can footprint.
LT1078ACH vs LM10CH/NOPB - which is better for a low-power sensor circuit?
Choose the LT1078ACH when its documented maximum supply current of 50 µA per amplifier and 5 V single-supply optimization provide a clear fit for the design. The LM10CH/NOPB is a separate precision-amplifier option that should be selected only after comparing its offset, bias current, common-mode range, stability requirements, and package drawing. Neither part should be approved solely from a general equivalence listing.
When should I choose LT1078ACH instead of LM10CH/NOPB?
Choose the LT1078ACH when the design benefits from its documented 50 µA maximum supply current per amplifier and explicit optimization for a 5 V single supply. The LM10CH/NOPB should be considered when its manufacturer specifications offer a closer fit for offset, input-bias-current, common-mode, or legacy instrumentation requirements. Compare the complete electrical tables and verify the metal-can pinout before either part is selected.
Is LT1078ACH suitable for battery-powered instrumentation?
The LT1078ACH is suitable for battery-powered instrumentation when low quiescent supply current is a primary requirement. According to the manufacturer datasheet, each amplifier draws at most 50 µA, and the device is optimized for 5 V single-supply operation. Designers should also evaluate input-bias-current error, offset behavior, output loading, and sensor standby current because amplifier supply current is only one part of total system consumption.
Is LT1078ACH RoHS and REACH compliant?
The RoHS and REACH status of LT1078ACH cannot be confirmed from the available manufacturer product-page excerpt. Use the Analog Devices LT1078 product page and the company's material-declaration or compliance records for the exact ordering code before making a compliance declaration. Treat both attributes as unknown until the manufacturer document or declaration explicitly confirms them.

بيانات مرجعية هندسية لـ LT1078ACH — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the LT1078ACH when a precision dual amplifier must operate from a 5 V single supply with a documented maximum supply current of 50 µA per amplifier. It is well suited to battery-powered sensing, low-level filtering, buffering, and compact instrumentation where the metal-can package and through-hole assembly are acceptable. The LT1078AH is the preferred same-family option when its operating grade, temperature coverage, and lifecycle status better match the design. Evaluate the LM10CH/NOPB when a cross-brand solution offers a closer match for offset, input bias current, common-mode range, or legacy instrumentation requirements. Regardless of candidate, verify the complete pinout, input and output limits, stability requirements, and component tolerances before treating the substitution as drop-in.

المقارنة مع البدائل

المعامل هذا المنتج LT1078AH LM10CH/NOPB
Brand Analog Devices Analog Devices Texas Instruments
Package 8-pin TO-5 metal can 8-pin TO-5 metal can 8-pin TO-5 metal can
Amplifier Count 2 amplifiers 2 amplifiers 2 amplifiers
Product Class Micropower precision dual op amp Micropower precision dual op amp Precision dual op amp

أبرز الفروقات

  • Explicit 5 V single-supply optimization (مقابلLM10CH/NOPB)
  • Documented micropower supply requirement (مقابلLM10CH/NOPB)
  • Same-family dual precision topology (مقابلLM10CH/NOPB)

ملاحظات التصميم

Budget the LT1078ACH using the documented maximum of 50 µA per amplifier, or 100 µA for both channels before allowing for supply-voltage and operating-condition effects. Add the load current drawn by the input network, feedback resistors, reference circuit, and bypass components. A 5 V single supply simplifies routing, but the output and input operating ranges must remain compatible with the signal at startup, shutdown, and overload conditions.

Place the bypass capacitor and any additional supply-decoupling component directly between the device supply pin and ground connection. Keep feedback resistors and compensation components close to their associated amplifier pins, and route high-impedance input traces away from power and switching nodes. Because the TO-5 metal can can act as an electrostatic shield, follow the manufacturer's grounding recommendation rather than connecting the can arbitrarily.

Do not substitute a surface-mount LT1078 ordering option without redesigning the footprint and checking the pin configuration. Likewise, confirm that the replacement amplifier's common-mode range, output swing, offset voltage, input bias current, and stability behavior meet the circuit requirements. A matching 8-pin outline alone is insufficient to establish drop-in compatibility for precision analog circuitry.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The manufacturer product-page excerpt does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for LT1078ACH. Confirm the exact ordering code against Analog Devices compliance documentation before making a declaration.

تم التحقق من البيانات في: 2026-11-14 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

LT1078ACH datasheet LT1078ACH datasheet pdf LT1078ACH pinout LT1078ACH specifications Analog Devices LT1078ACH LT1078ACH TO-5-8 package LT1078ACH replacement LT1078ACH equivalent LT1078ACH vs LM10CH/NOPB LT1078ACH price LT1078ACH stock LT1078ACH micropower dual op amp LT1078ACH single supply 5V LT1078ACH battery powered instrumentation

المكونات والمصطلحات ذات الصلة

Analog Devices LT1078ACH LT1078 LT1078AH LM10CH/NOPB LT1079 micropower dual operational amplifier precision operational amplifier analog signal conditioning single-supply operation 5 V power supply 50 µA supply current per amplifier 8-pin TO-5 metal can TO-205-8 package through-hole mounting active feedback input bias current input offset voltage common-mode voltage range output swing sensor signal conditioning active filter voltage-reference buffer battery-powered instrumentation
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر