LT1494CN8 - 1.5µA Precision Rail-to-Rail Op Amp | Analog Devices
MPN: LT1494CN8 ✓ نشطLT1494CN8 نظرة عامة
An operational amplifier is an active analog building block that amplifies the voltage difference between its differential inputs while using negative feedback to define closed-loop gain and bandwidth. The LT1494 belongs to the precision op amp category and, hierarchically, to the amplifier IC and semiconductor families. Its rail-to-rail input and output characteristics are useful when signals approach the supply rails, while its extremely low supply current supports battery-powered and long-duration measurement systems.
The LT1494 combines a maximum supply current of 1.5µA with precision-focused specifications. Input offset voltage is limited to 375µV, typical temperature drift is 0.4µV/°C, and input offset current is limited to 100pA. The gain-bandwidth product is 2.7kHz and slew rate is 1mV/µs, making the device better suited to low-frequency precision signal conditioning than to high-speed waveform or communications tasks.
Analog Devices describes the LT1494 as the lowest-power precision op-amp family, combining low supply consumption with precision amplifier performance. The family includes single, dual, and quad configurations, and the LT1494CN8 is the single-amplifier 8-pin PDIP option. Its 100V/mV minimum open-loop gain supports accurate gain behavior, while the low offset and bias currents are valuable when sensing weak sensor outputs or operating from finite battery energy.
Typical uses include low-power sensor interfaces, battery-powered instrumentation, precision current measurement, low-frequency active filters, and buffered sensor conditioning. The 2.7kHz gain-bandwidth product supports low-frequency loops, while rail-to-rail input and output operation increases usable signal range in compact systems. The part is particularly appropriate when current consumption is more restrictive than bandwidth.
The principal design trade-off is bandwidth: very low power and precision come with a 2.7kHz gain-bandwidth product and 1mV/µs slew rate. Stable feedback-network values, adequate bypass capacitance, and careful handling of input bias current are therefore important. The DIP package also requires through-hole layout clearance rather than a compact surface-mount footprint.
This product record combines the manufacturer’s LT1494 family information with practical selection guidance, package details, specification comparisons, and design considerations. It supports engineers evaluating whether the LT1494CN8’s 1.5µA maximum supply current and precision offset performance justify its lower bandwidth in low-power analog systems.
بدائل مباشرة لـ LT1494CN8 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
LT1494CN8#PBF
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
LT1494IN8#PBF
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
LT1494HS8#PBF
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
LT1494CN8 الحدود القصوى والخصائص الكهربائية
| Amplifier Type | Single operational amplifier |
| Maximum Supply Current | 1.5µA |
| Input Offset Voltage | 375µV maximum |
| Input Offset Voltage Drift | 0.4µV/°C typical |
| Input Offset Current | 100pA maximum |
| Minimum Open-Loop Gain | 100V/mV |
| Gain-Bandwidth Product | 2.7kHz |
| Slew Rate | 1mV/µs |
| Supply Voltage Range | ±18V, 36V total |
| Input Type | Rail-to-rail input |
| نوع الخرج | Rail-to-rail output |
| Number of Channels | 1 channel |
| عدد الدبابيس | 8 pins |
| العلبة | 8-pin PDIP |
| نوع التركيب | Through-hole |
| Product Class | Standard general-purpose amplifier |
| Temperature Grade | Commercial |
دليل تكوين أطراف LT1494CN8 8-pin pdip
تكوين الأطراف لـ LT1494CN8 (حزمة 8-pin pdip). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ LT1494CN8.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
LT1494CN8 مناسب لـ 6 التطبيقs: Battery-Powered Sensor Interface, Precision Current Measurement, Portable Precision Instrumentation, Low-Frequency Active Filter, Precision Bridge Signal Conditioning, Low-Power Buffer Stage.
Battery-Powered Sensor Interface
The LT1494CN8 fits low-energy sensor front ends where the amplifier itself must not dominate the standby budget. Its maximum supply current of 1.5µA preserves battery capacity during monitoring intervals, while rail-to-rail input and output operation increases the usable range of low-voltage sensor signals. The 375µV maximum input offset voltage and 100pA maximum input offset current help limit systematic error when amplifying weak outputs from resistive or electrochemical sensors. In a typical transimpedance or noninverting conditioning circuit, the low bias current minimizes current-induced error. Designers should keep closed-loop bandwidth below the 2.7kHz gain-bandwidth product and account for the 1mV/µs slew rate when large slow steps must be settled.
Precision Current Measurement
The LT1494CN8 is appropriate for low-frequency current-sense measurements where low offset and very low supply current are more valuable than wide bandwidth. A 375µV maximum input offset voltage translates into a small output error after the selected feedback gain is applied, while the 100pA maximum input offset current reduces disturbance at high-impedance sensing nodes. The amplifier can be placed around a low-side shunt in a noninverting configuration or used with a transimpedance stage where the measured current is small and changes slowly. Its 1.5µA maximum supply current adds little overhead to a battery-powered meter. The 2.7kHz gain-bandwidth product and 1mV/µs slew rate make settling time and shunt parasitics important design checks.
Portable Precision Instrumentation
The LT1494CN8 supports portable analytical and test instruments that must operate from limited energy while maintaining accurate low-frequency measurements. The combination of a 1.5µA maximum supply current, rail-to-rail input and output behavior, and 375µV maximum input offset voltage allows the amplifier to condition signals in compact battery-powered instruments without using the full supply range inefficiently. The 0.4µV/°C typical offset drift is also relevant when ambient temperature changes during field measurements. It can be used in buffer, differential, or gain stages around slow sensors. Because its gain-bandwidth product is 2.7kHz, compensation values should favor stability, and the 1mV/µs slew rate should be considered when the instrument must recover from range changes.
Low-Frequency Active Filter
The LT1494CN8 can implement low-frequency active filters and signal conditioners because its precision offset specifications limit DC errors while its 2.7kHz gain-bandwidth product supports narrow-band applications. Rail-to-rail input and output operation is useful when filter stages operate near the supply limits of a compact low-voltage system. Its maximum supply current of 1.5µA allows multiple amplifier stages to be used in a portable filter without creating a disproportionate load. The 1mV/µs slew rate limits large-signal behavior, so the filter should emphasize low-frequency or small-amplitude signals. Component tolerances, input bias current, and the amplifier’s open-loop gain should be checked to maintain the intended cutoff and stopband characteristics.
Precision Bridge Signal Conditioning
The LT1494CN8 is suitable for conditioning low-frequency bridge or differential sensor signals in compact measurement equipment. Its 375µV maximum input offset voltage and 100pA maximum input offset current are important when the useful signal may be only millivolts and the source impedance can be high. The precision amplifier remains within a low-power budget because its maximum supply current is 1.5µA. Rail-to-rail input operation helps preserve signal span, although bridge excitation and common-mode limits must be respected. The 2.7kHz gain-bandwidth product makes the device appropriate for quasi-static bridges rather than high-speed load-cell dynamics, and the 1mV/µs slew rate should be checked during startup or calibration transitions.
Low-Power Buffer Stage
The LT1494CN8 can serve as a low-power buffer between a high-impedance source and a downstream measurement or control circuit. The 100pA maximum input offset current is valuable when driving the amplifier from a high-impedance sensor, while the 375µV maximum input offset voltage limits DC error. A maximum supply current of 1.5µA makes the buffer attractive in battery-operated instruments, and rail-to-rail output operation can improve utilization of a low-voltage supply. The buffer should be used primarily for slow signals because the 2.7kHz gain-bandwidth product limits loop bandwidth and the 1mV/µs slew rate limits large-signal response. Loading, input capacitance, and output stability should be evaluated during layout review.
بيانات مرجعية هندسية لـ LT1494CN8 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | LT1494CN8#PBF | LT1494IN8#PBF | LT1494HS8#PBF |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 8-pin PDIP | 8-pin PDIP - same | 8-pin PDIP - same | 8-pin PDIP - same |
| Channel Configuration | Single amplifier | Single amplifier | Single amplifier | Single amplifier |
| Maximum Supply Current | 1.5µA | 1.5µA family rating | 1.5µA family rating | 1.5µA family rating |
| Gain-Bandwidth Product | 2.7kHz | 2.7kHz | 2.7kHz | 2.7kHz |
| Slew Rate | 1mV/µs | 1mV/µs | 1mV/µs | 1mV/µs |
| Input Offset Voltage | 375µV maximum | 375µV maximum family specification | 375µV maximum | 375µV maximum family specification |
| Input Offset Current | 100pA maximum | 100pA maximum family specification | 100pA maximum | 100pA maximum family specification |
| Input and Output Operation | Rail-to-rail input and output | Rail-to-rail input and output | Rail-to-rail input and output | Rail-to-rail input and output |
| Minimum Open-Loop Gain | 100V/mV | 100V/mV family specification | 100V/mV | 100V/mV family specification |
أبرز الفروقات
- Extremely low power with precision specifications (مقابلLT1494CN8#PBF)
- Pin-compatible single-amplifier family alternatives (مقابلLT1494IN8#PBF)
- Low-frequency performance matched to precision sensing (مقابلLT1494HS8#PBF)
ملاحظات التصميم
Do not treat the LT1494CN8 as a general-purpose wideband op amp. Its 2.7kHz gain-bandwidth product and 1mV/µs slew rate make it suitable primarily for slow precision signals. Check the closed-loop gain against the available bandwidth, verify settling time for the intended measurement accuracy, and use simulation to confirm stability with the selected resistor and capacitor values.
Estimated: amplifier supply-current contribution is approximately 1.5µA at the stated maximum, before considering bias currents and external circuitry. This figure should be added directly to the system power budget when calculating battery life. Because this is a maximum rating, production designs should use the datasheet’s typical and worst-case supply-current conditions over temperature to avoid underestimating the energy requirement.
Place the op amp close to the high-impedance input node to minimize leakage through board contamination and stray capacitance. Keep feedback resistors and sensitive input traces away from switching nodes and high-current paths. The 8-pin PDIP footprint requires through-hole placement, so preserve the manufacturer’s pin numbering and verify the complete pin description table before routing power, input, output, offset-null, and compensation connections.
Account for the 100pA maximum input offset current when the source impedance is high. Estimated input-current error is IERROR = IOFFSET × RSOURCE; for example, a 1MΩ source produces approximately 100µV of error at the maximum bias current. The 375µV maximum input offset voltage and this source-impedance term should be combined when budgeting total measurement uncertainty.
معلومات الامتثال
The target MPN has no verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement in the cited product information. LT1494CN8#PBF is documented as a lead-free ordering option, but that suffix-specific status is not transferred to LT1494CN8.