Analog Devices

LT1494CN8 - 1.5µA Precision Rail-to-Rail Op Amp | Analog Devices

MPN: LT1494CN8 ✓ Active
1.5µA Vdss 100pA maximum Id 8-pin PDIP Package
MOQ: 1 |

LT1494CN8 Overview

The Analog Devices LT1494CN8 is a single-channel, low-power precision operational amplifier with a maximum supply current of 1.5µA, rail-to-rail input and output operation, and an 8-pin PDIP package. Its key ratings are 375µV maximum input offset voltage, 0.4µV/°C typical offset drift, 100pA maximum input offset current, and a 100V/mV minimum open-loop gain.

An operational amplifier is an active analog building block that amplifies the voltage difference between its differential inputs while using negative feedback to define closed-loop gain and bandwidth. The LT1494 belongs to the precision op amp category and, hierarchically, to the amplifier IC and semiconductor families. Its rail-to-rail input and output characteristics are useful when signals approach the supply rails, while its extremely low supply current supports battery-powered and long-duration measurement systems.

The LT1494 combines a maximum supply current of 1.5µA with precision-focused specifications. Input offset voltage is limited to 375µV, typical temperature drift is 0.4µV/°C, and input offset current is limited to 100pA. The gain-bandwidth product is 2.7kHz and slew rate is 1mV/µs, making the device better suited to low-frequency precision signal conditioning than to high-speed waveform or communications tasks.

Analog Devices describes the LT1494 as the lowest-power precision op-amp family, combining low supply consumption with precision amplifier performance. The family includes single, dual, and quad configurations, and the LT1494CN8 is the single-amplifier 8-pin PDIP option. Its 100V/mV minimum open-loop gain supports accurate gain behavior, while the low offset and bias currents are valuable when sensing weak sensor outputs or operating from finite battery energy.

Typical uses include low-power sensor interfaces, battery-powered instrumentation, precision current measurement, low-frequency active filters, and buffered sensor conditioning. The 2.7kHz gain-bandwidth product supports low-frequency loops, while rail-to-rail input and output operation increases usable signal range in compact systems. The part is particularly appropriate when current consumption is more restrictive than bandwidth.

The principal design trade-off is bandwidth: very low power and precision come with a 2.7kHz gain-bandwidth product and 1mV/µs slew rate. Stable feedback-network values, adequate bypass capacitance, and careful handling of input bias current are therefore important. The DIP package also requires through-hole layout clearance rather than a compact surface-mount footprint.

This product record combines the manufacturer’s LT1494 family information with practical selection guidance, package details, specification comparisons, and design considerations. It supports engineers evaluating whether the LT1494CN8’s 1.5µA maximum supply current and precision offset performance justify its lower bandwidth in low-power analog systems.

Drop-in alternatives for LT1494CN8 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

LT1494CN8#PBF

✅ Drop-In
📦 8-pin PDIP
Lead-free ordering option while retaining the same 8-pin PDIP footprint and LT1494 single-amplifier architecture; no quantified electrical difference was identified

📋 Reference alternative (not in catalog)

LT1494IN8#PBF

✅ Drop-In
📦 8-pin PDIP
Same 8-pin PDIP package and LT1494 precision family; input bias and offset characteristics remain in the same class, with no quantified change identified

📋 Reference alternative (not in catalog)

LT1494HS8#PBF

✅ Drop-In
📦 8-pin PDIP
Same 8-pin PDIP footprint with 2.7kHz gain-bandwidth product and 1mV/µs slew rate; ordering-code or grade differences require datasheet confirmation

📋 Reference alternative (not in catalog)

LT1494CN8 Maximum Ratings & Electrical Characteristics

Amplifier Type Single operational amplifier
Maximum Supply Current 1.5µA
Input Offset Voltage 375µV maximum
Input Offset Voltage Drift 0.4µV/°C typical
Input Offset Current 100pA maximum
Minimum Open-Loop Gain 100V/mV
Gain-Bandwidth Product 2.7kHz
Slew Rate 1mV/µs
Supply Voltage Range ±18V, 36V total
Input Type Rail-to-rail input
Output Type Rail-to-rail output
Number of Channels 1 channel
Number of Pins 8 pins
Package 8-pin PDIP
Mounting Type Through-hole
Product Class Standard general-purpose amplifier
Temperature Grade Commercial

LT1494CN8 8-pin pdip Pin Configuration Guide

Pin configuration for LT1494CN8 (8-pin pdip package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

8-pin pdip package pinout diagram for LT1494CN8

No detailed pinout data available for LT1494CN8.

Refer to the datasheet for full pin configuration.

Typical Applications

LT1494CN8 is suitable for 6 applications: Battery-Powered Sensor Interface, Precision Current Measurement, Portable Precision Instrumentation, Low-Frequency Active Filter, Precision Bridge Signal Conditioning, Low-Power Buffer Stage.

🧩

Battery-Powered Sensor Interface

The LT1494CN8 fits low-energy sensor front ends where the amplifier itself must not dominate the standby budget. Its maximum supply current of 1.5µA preserves battery capacity during monitoring intervals, while rail-to-rail input and output operation increases the usable range of low-voltage sensor signals. The 375µV maximum input offset voltage and 100pA maximum input offset current help limit systematic error when amplifying weak outputs from resistive or electrochemical sensors. In a typical transimpedance or noninverting conditioning circuit, the low bias current minimizes current-induced error. Designers should keep closed-loop bandwidth below the 2.7kHz gain-bandwidth product and account for the 1mV/µs slew rate when large slow steps must be settled.

⚡

Precision Current Measurement

The LT1494CN8 is appropriate for low-frequency current-sense measurements where low offset and very low supply current are more valuable than wide bandwidth. A 375µV maximum input offset voltage translates into a small output error after the selected feedback gain is applied, while the 100pA maximum input offset current reduces disturbance at high-impedance sensing nodes. The amplifier can be placed around a low-side shunt in a noninverting configuration or used with a transimpedance stage where the measured current is small and changes slowly. Its 1.5µA maximum supply current adds little overhead to a battery-powered meter. The 2.7kHz gain-bandwidth product and 1mV/µs slew rate make settling time and shunt parasitics important design checks.

🖥️

Portable Precision Instrumentation

The LT1494CN8 supports portable analytical and test instruments that must operate from limited energy while maintaining accurate low-frequency measurements. The combination of a 1.5µA maximum supply current, rail-to-rail input and output behavior, and 375µV maximum input offset voltage allows the amplifier to condition signals in compact battery-powered instruments without using the full supply range inefficiently. The 0.4µV/°C typical offset drift is also relevant when ambient temperature changes during field measurements. It can be used in buffer, differential, or gain stages around slow sensors. Because its gain-bandwidth product is 2.7kHz, compensation values should favor stability, and the 1mV/µs slew rate should be considered when the instrument must recover from range changes.

🌐

Low-Frequency Active Filter

The LT1494CN8 can implement low-frequency active filters and signal conditioners because its precision offset specifications limit DC errors while its 2.7kHz gain-bandwidth product supports narrow-band applications. Rail-to-rail input and output operation is useful when filter stages operate near the supply limits of a compact low-voltage system. Its maximum supply current of 1.5µA allows multiple amplifier stages to be used in a portable filter without creating a disproportionate load. The 1mV/µs slew rate limits large-signal behavior, so the filter should emphasize low-frequency or small-amplitude signals. Component tolerances, input bias current, and the amplifier’s open-loop gain should be checked to maintain the intended cutoff and stopband characteristics.

🏭

Precision Bridge Signal Conditioning

The LT1494CN8 is suitable for conditioning low-frequency bridge or differential sensor signals in compact measurement equipment. Its 375µV maximum input offset voltage and 100pA maximum input offset current are important when the useful signal may be only millivolts and the source impedance can be high. The precision amplifier remains within a low-power budget because its maximum supply current is 1.5µA. Rail-to-rail input operation helps preserve signal span, although bridge excitation and common-mode limits must be respected. The 2.7kHz gain-bandwidth product makes the device appropriate for quasi-static bridges rather than high-speed load-cell dynamics, and the 1mV/µs slew rate should be checked during startup or calibration transitions.

🔧

Low-Power Buffer Stage

The LT1494CN8 can serve as a low-power buffer between a high-impedance source and a downstream measurement or control circuit. The 100pA maximum input offset current is valuable when driving the amplifier from a high-impedance sensor, while the 375µV maximum input offset voltage limits DC error. A maximum supply current of 1.5µA makes the buffer attractive in battery-operated instruments, and rail-to-rail output operation can improve utilization of a low-voltage supply. The buffer should be used primarily for slow signals because the 2.7kHz gain-bandwidth product limits loop bandwidth and the 1mV/µs slew rate limits large-signal response. Loading, input capacitance, and output stability should be evaluated during layout review.

What is the LT1494CN8?
The LT1494CN8 is a single-channel, precision operational amplifier from Analog Devices with rail-to-rail input and output operation, a maximum supply current of 1.5µA, and an 8-pin PDIP package. According to the Analog Devices LT1494 product page, the LT1494 family is designed for low-power precision signal conditioning where current consumption is a primary design constraint.
What is the supply current of LT1494CN8?
The LT1494CN8 has a maximum supply current of 1.5µA. This very low consumption makes it suitable for battery-powered instrumentation, portable sensors, and other low-energy analog systems. The Analog Devices LT1494 product page identifies the family as a precision rail-to-rail op amp optimized around its maximum 1.5µA supply current.
What is the gain-bandwidth product of LT1494CN8?
The LT1494CN8 has a gain-bandwidth product of 2.7kHz. This defines its practical small-signal bandwidth and makes the amplifier most appropriate for low-frequency precision loops rather than wideband signal amplification. Its specified slew rate is 1mV/µs, so closed-loop noise-gain and stability design remain important.
Where can I download the LT1494CN8 datasheet PDF?
The official LT1494 documentation is available through the Analog Devices product page at https://www.analog.com/en/products/lt1494.html. That page links the family data sheet and technical documentation for the LT1494, LT1495, and LT1496 precision rail-to-rail input and output amplifier families.
Where can I find the LT1494CN8 pinout?
Use the pin-description table in the LT1494 manufacturer data sheet for the definitive LT1494CN8 pin assignments. The verified catalog information identifies the device as an 8-pin PDIP single amplifier. Because the complete pin table is not reproduced on the product page, verify numbering against the data sheet before assigning PCB tracks.
Is LT1494CN8 rail-to-rail?
Yes, the LT1494CN8 has rail-to-rail input and output operation. Analog Devices identifies the LT1494 as a precision rail-to-rail input and output op amp. This allows the amplifier to process signals close to either supply rail and improves output range in low-voltage systems, although input and output headroom still depends on operating conditions.
Where can I buy LT1494CN8 and check current availability?
Use the Request a Quote form on this page to ask about LT1494CN8 availability, current lead time, and order quantities. The form provides a direct path for quotation and stock confirmation without relying on static catalog figures that can change. The device is identified as the 8-pin PDIP single-amplifier member of the LT1494 family.
What is the price of LT1494CN8?
The current LT1494CN8 unit price is handled through the Request a Quote form on this page. Pricing depends on order quantity, package form, sourcing availability, and market conditions, so a quotation is more reliable than a static unit figure. The form also allows the buyer to include the intended purchase quantity and delivery requirements.
What is the lead time for LT1494CN8?
Request the current LT1494CN8 lead time through the Request a Quote form on this page. Lead time can vary with order quantity, authorized channel inventory, and production scheduling. The manufacturer lists the LT1494 family as production, and the part is available as an 8-pin PDIP single-amplifier configuration.
What is the best drop-in replacement for LT1494CN8?
LT1494CN8#PBF is the closest listed drop-in option because it retains the LT1494 single-amplifier architecture and 8-pin PDIP footprint while specifying lead-free termination. Analog Devices also identifies LT1494IN8#PBF and LT1494HS8#PBF as related PDIP-8 LT1494-family devices. Confirm ordering code, grade, and electrical requirements against the manufacturer data sheet before substitution.
What can replace LT1494CN8?
LT1494CN8#PBF can serve as a lead-free-terminated replacement for LT1494CN8 when the PCB and ordering requirements match. It is an 8-pin PDIP precision op amp from the same LT1494 family. LT1494IN8#PBF and LT1494HS8#PBF are additional related 8-pin PDIP options, but their order codes and exact conditions should be reviewed before using them as substitutes.
LT1494CN8 vs LT1494CN8#PBF: which one should I choose?
Choose LT1494CN8#PBF when the assembly process requires a lead-free termination; both devices are identified as 8-pin PDIP LT1494-family single amplifiers. The principal documented difference is the ordering suffix, not a change to the package. Confirm the exact ordering information and production status for the selected suffix with Analog Devices before releasing the design.
LT1494CN8 vs LT1494IN8: which is better for a low-power sensor interface?
Both are presented as compatible 8-pin PDIP LT1494-family single precision amplifiers, and LT1494IN8 is identified as a complete replacement for the target configuration. For a low-power sensor interface, prioritize the exact ordering suffix, lead-free requirement, availability, and operating grade. The shared family specification includes a 1.5µA maximum supply current and rail-to-rail operation.
When should I choose LT1494CN8 over a wider-bandwidth op amp?
Choose LT1494CN8 when battery life or standby power is more important than wideband performance. Its maximum supply current is 1.5µA, while its 2.7kHz gain-bandwidth product and 1mV/µs slew rate are suited to low-frequency loops. It is a strong choice for slow sensors, precision current measurement, and compact battery-powered instruments.
Is LT1494CN8 suitable for precision current measurement?
The LT1494CN8 is suitable for precision current measurement when the sensed signal is slow and the amplifier can operate in a low-frequency feedback loop. Its 375µV maximum input offset voltage, 100pA maximum input offset current, and 1.5µA maximum supply current support low-power instrumentation. The 2.7kHz bandwidth and 1mV/µs slew rate limit its suitability for fast transients.

Engineering reference data for LT1494CN8 — comparison, design guidance, and compliance information.

Selection Guide

Choose LT1494CN8 when a battery-powered or low-leakage system needs a precision single amplifier with a maximum supply current of 1.5µA, rail-to-rail input and output operation, and an 8-pin PDIP footprint. It is especially appropriate for slow sensors, current measurement, and precision buffers where the 2.7kHz gain-bandwidth product and 1mV/µs slew rate are acceptable. Choose LT1494CN8#PBF when the assembly process requires the lead-free ordering option. Consider LT1494IN8#PBF or LT1494HS8#PBF only after confirming the exact ordering-code, grade, and electrical requirements in the manufacturer data sheet. None of these family options provides substantially higher bandwidth; selecting a different amplifier family may be necessary if fast signals must be amplified, but such a change would require a new footprint and parameter review rather than a drop-in substitution.

Comparison with Alternatives

Parameter This Product LT1494CN8#PBF LT1494IN8#PBF LT1494HS8#PBF
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-pin PDIP 8-pin PDIP - same 8-pin PDIP - same 8-pin PDIP - same
Channel Configuration Single amplifier Single amplifier Single amplifier Single amplifier
Maximum Supply Current 1.5µA 1.5µA family rating 1.5µA family rating 1.5µA family rating
Gain-Bandwidth Product 2.7kHz 2.7kHz 2.7kHz 2.7kHz
Slew Rate 1mV/µs 1mV/µs 1mV/µs 1mV/µs
Input Offset Voltage 375µV maximum 375µV maximum family specification 375µV maximum 375µV maximum family specification
Input Offset Current 100pA maximum 100pA maximum family specification 100pA maximum 100pA maximum family specification
Input and Output Operation Rail-to-rail input and output Rail-to-rail input and output Rail-to-rail input and output Rail-to-rail input and output
Minimum Open-Loop Gain 100V/mV 100V/mV family specification 100V/mV 100V/mV family specification

Key Differentiators

  • Extremely low power with precision specifications (vs LT1494CN8#PBF)
  • Pin-compatible single-amplifier family alternatives (vs LT1494IN8#PBF)
  • Low-frequency performance matched to precision sensing (vs LT1494HS8#PBF)

Design Notes

Do not treat the LT1494CN8 as a general-purpose wideband op amp. Its 2.7kHz gain-bandwidth product and 1mV/µs slew rate make it suitable primarily for slow precision signals. Check the closed-loop gain against the available bandwidth, verify settling time for the intended measurement accuracy, and use simulation to confirm stability with the selected resistor and capacitor values.

Estimated: amplifier supply-current contribution is approximately 1.5µA at the stated maximum, before considering bias currents and external circuitry. This figure should be added directly to the system power budget when calculating battery life. Because this is a maximum rating, production designs should use the datasheet’s typical and worst-case supply-current conditions over temperature to avoid underestimating the energy requirement.

Place the op amp close to the high-impedance input node to minimize leakage through board contamination and stray capacitance. Keep feedback resistors and sensitive input traces away from switching nodes and high-current paths. The 8-pin PDIP footprint requires through-hole placement, so preserve the manufacturer’s pin numbering and verify the complete pin description table before routing power, input, output, offset-null, and compensation connections.

Account for the 100pA maximum input offset current when the source impedance is high. Estimated input-current error is IERROR = IOFFSET × RSOURCE; for example, a 1MΩ source produces approximately 100µV of error at the maximum bias current. The 375µV maximum input offset voltage and this source-impedance term should be combined when budgeting total measurement uncertainty.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The target MPN has no verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement in the cited product information. LT1494CN8#PBF is documented as a lead-free ordering option, but that suffix-specific status is not transferred to LT1494CN8.

Data verified on: 2026-11-19 — data verified and curated by XAIPART's component engineering team

Related Searches

LT1494CN8 datasheet LT1494CN8 pinout LT1494CN8 datasheet pdf LT1494CN8 specifications LT1494CN8 equivalent LT1494CN8 replacement LT1494CN8 vs LT1494IN8 LT1494CN8 price LT1494CN8 stock Analog Devices LT1494CN8 LT1494CN8 PDIP-8 amplifier LT1494CN8 precision sensor interface

Related Components & Terms

Analog Devices Linear Technology LT1494CN8 LT1494CN8#PBF LT1494IN8#PBF LT1494HS8#PBF LT1494 precision operational amplifier low-power op amp rail-to-rail input rail-to-rail output amplifier IC semiconductor 8-pin PDIP PDIP package through-hole package supply current input offset voltage input offset current gain-bandwidth product slew rate open-loop gain sensor interface battery-powered instrumentation
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details