MAX202ECWE+T - 5V RS-232 Transceiver | Analog Devices
MPN: MAX202ECWE+T ✓ نشطMAX202ECWE+T نظرة عامة
An RS-232 transceiver is an interface IC that converts logic-level digital signals into differential, voltage-level signals suitable for RS-232 links, while converting received RS-232 signals back into logic levels. Within the interface hierarchy, the MAX202E belongs to the RS-232 transceiver class of interface ICs, combining line drivers, line receivers, and an integrated charge pump in one package.
Key features include two driver channels, two receiver channels, full-duplex operation, and ±15 kV ESD protection. The integrated charge pump supports operation from a single +5 V supply without external dual-supply generation. Its 120 kbps maximum signaling rate covers conventional RS-232 equipment, industrial serial links, instrumentation, and embedded control systems while providing useful margin above many legacy 960-bit-per-second and 115.2-kbit/s ports.
The MAX202E family is designed to meet EIA/TIA-232E and CCITT V.28 requirements. Maxim describes the MAX202E-MAX213E, MAX232E, and MAX241E family as rugged line-driver and receiver products for RS-232 and V.28 communication in harsh environments. Device variants in the family are distinguished by package, temperature grade, and operating feature combinations, so the exact suffix must be checked before replacing an installed part.
Typical applications include industrial serial controllers, barcode and point-of-sale equipment, test and measurement instruments, laboratory data-acquisition systems, and service-port interfaces. It is particularly useful where a system needs two protected RS-232 ports but lacks negative supply rails. The 16-pin wide SOIC package also supports conventional surface-mount assembly and compact two-channel interface designs.
When laying out the circuit, place the charge-pump capacitors and the interface-side bypass capacitor close to their associated pins. Keep the RS-232 driver outputs away from sensitive receiver inputs, and route the connector-side traces away from clocks, switching supplies, and high-speed digital nets. Confirm the receiver threshold behavior and ensure downstream firmware treats the port as an RS-232, not an RS-485, interface.
This product page combines the manufacturer's interface description with practical replacement criteria, application guidance, package details, and a pin-compatible comparison focused on the MAX202ECWE+T. It helps engineers determine whether the device fits a +5 V RS-232 design before beginning board layout or production sourcing.
بدائل مباشرة لـ MAX202ECWE+T — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع MAX202ECWE+T (نفس عامل الشكل والبصمة) — يختلف في Package, Product Type, Supply Voltage.
MAX202EWE+T
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←MAX202ECWE+T المواصفات
| Product Type | RS-232 transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Duplex Capability | Full duplex |
| Maximum Data Rate | 120 kbps |
| جهد التغذية | +5 V |
| ESD Protection | ±15 kV human body model |
| Supported Standards | EIA/TIA-232E and CCITT V.28 |
| Charge Pump | Integrated |
| العلبة | 16-pin wide SOIC |
| نوع التركيب | Surface mount |
دليل تكوين أطراف MAX202ECWE+T 16-pin wide soic
تكوين الأطراف لـ MAX202ECWE+T (حزمة 16-pin wide soic). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MAX202ECWE+T.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MAX202ECWE+T مناسب لـ 6 التطبيقs: Industrial Serial Controller Interface, Test and Measurement Equipment, Barcode and Point-of-Sale Terminals, Embedded Data Acquisition Systems, Instrumentation and Service Ports, Legacy Equipment Retrofit.
Industrial Serial Controller Interface
The MAX202ECWE+T is useful when an industrial controller has a logic-level UART but needs two full-duplex RS-232 ports. Its two drivers and two receivers consolidate four interface functions into one 16-pin wide-SOIC device, while the integrated charge pump permits operation from +5 V without a separate negative rail. The 120 kbps capability covers common 960-bit/s, 19.2-kbit/s, and 115.2-kbit/s industrial protocols. Use the driver outputs for equipment connectors and receiver inputs for incoming control or status commands, with isolation, surge protection, and grounding selected for the installation environment.
موصى به
Test and Measurement Equipment
The MAX202ECWE+T fits laboratory instruments that exchange commands and measurement data with a host computer over RS-232. Two protected driver and receiver channels support bidirectional communication without allocating separate logic families for transmit and receive. Its single +5 V operation simplifies front-panel and portable instrument power design, while EIA/TIA-232E and V.28 compatibility support legacy test equipment. The interface can maintain operation up to 120 kbps, although practical cable length and loading must remain within the RS-232 application constraints. Keep connector-side routing away from precision analog sections.
موصى به
Barcode and Point-of-Sale Terminals
The MAX202ECWE+T can connect a point-of-sale controller or barcode terminal to legacy serial peripherals. Two channels allow a compact design to handle both a bidirectional service port and another RS-232 device without duplicating the line-driver and line-receiver circuitry. Operation from a single +5 V rail simplifies terminal power architecture, and ±15 kV HBM protection improves robustness at user-accessible connectors. Firmware should configure the UART for the peripheral's baud rate and framing, while the board provides proper chassis grounding and any required surge suppression for externally routed cables.
موصى به
Embedded Data Acquisition Systems
The MAX202ECWE+T is appropriate for data-acquisition equipment that must communicate with older laboratory instruments, service controllers, or external sensors using RS-232. The dual-driver, dual-receiver arrangement supports two physical channels on a shared board, and the integrated charge pump avoids adding a negative supply near the analog circuitry. With a maximum rate of 120 kbps, the device covers common acquisition-control rates and offers margin above 115.2 kbit/s operation. Place the interface away from high-impedance sensors and keep the charge-pump and bypass capacitors close to the IC to minimize supply disturbance.
موصى به
Instrumentation and Service Ports
The MAX202ECWE+T supports compact service interfaces on instrumentation, programmable power systems, and diagnostic equipment. Its +5 V operation simplifies systems that already derive a 5 V logic rail, while the integrated charge pump supplies the bipolar levels required at the RS-232 driver outputs. Two drivers and two receivers provide flexibility for transmitting commands, receiving status, and implementing full-duplex service links. The 16-pin wide-SOIC package is convenient for conventional PCB assembly, but pin assignments and package dimensions must be checked directly against the selected schematic before layout begins.
موصى به
Legacy Equipment Retrofit
The MAX202ECWE+T helps modernize equipment that retains an RS-232 service port while adopting a +5 V embedded controller. Its EIA/TIA-232E and CCITT V.28 compatibility supports conventional host-to-device communication, and the 120 kbps rate covers common legacy peripheral speeds. The two-channel arrangement can preserve a bidirectional primary port while adding a second diagnostic channel. Because RS-232 is point-to-point rather than a multi-drop bus, keep one driver active on each point-to-point connection and use the logic layer to manage transmit enable timing when sharing a hardware port.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ MAX202ECWE+T — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | MAX202EWE+ |
|---|---|---|
| Package | 16-pin wide SOIC | 16-pin wide SOIC |
| Brand | Analog Devices | Analog Devices |
| Transceiver Configuration | 2 drivers and 2 receivers | 2 drivers and 2 receivers |
| Supply Voltage | +5 V | +5 V |
| Maximum Data Rate | 120 kbps | 120 kbps |
| ESD Protection | ±15 kV HBM | ±15 kV HBM |
| Charge Pump | Integrated | Integrated |
| Supported Standards | EIA/TIA-232E and CCITT V.28 | EIA/TIA-232E and CCITT V.28 |
| Manufacturer Ordering Suffix | ECWE+T | EWE+ |
أبرز الفروقات
- Two complete RS-232 channels in one package (مقابلMAX202EWE+)
- Single +5 V interface operation (مقابلMAX202EWE+)
- High-speed protected RS-232 operation (مقابلMAX202EWE+)
ملاحظات التصميم
Place the charge-pump capacitors, supply bypass capacitor, and any receiver-input bypass components directly beside their associated pins. Keep the traces short and return each capacitor ground to the nearest device ground connection. This minimizes loop area and helps preserve the required RS-232 output levels and supported data rate under load.
Do not assume that every 16-pin MAX202 ordering option is footprint-compatible. The wide SOIC used by MAX202ECWE+T differs from narrow-SOIC and TSSOP packages even when the transceiver function is similar. Confirm body width, lead pitch, exposed-pad requirements, and every pin assignment in the manufacturer package drawing before changing the component on an existing board.
Route the RS-232 connector-side nets away from clocks, switching-regulator traces, relays, and sensitive analog inputs. Connect the connector shield and equipment ground according to the system grounding strategy rather than arbitrarily tying them at the IC. If a long cable or high-noise industrial environment is involved, evaluate external surge and common-mode protection rather than relying solely on the IC's ±15 kV HBM rating.
Use a +5 V source with low impedance and decouple it near the MAX202ECWE+T. Account for both the transceiver's supply current and the charge-pump-generated driver current when sizing the rail. Keep the RS-232 driver current within the load conditions for which the manufacturer's EIA/TIA-232E compliance and 120 kbps data-rate claims are specified.
معلومات الامتثال
The product documentation identifies EIA/TIA-232E and CCITT V.28 interface compliance and ±15 kV HBM ESD protection. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established from the cited pages.