Analog Devices

MAX202ECWE+T - 5V RS-232 Transceiver | Analog Devices

MPN: MAX202ECWE+T ✓ সক্রিয়
+5 V Vdss EIA/TIA-232E and CCITT V.28 Rds(on) 16-pin wide SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MAX202ECWE+T সারাংশ

Analog Devices MAX202ECWE+T is a dual-channel RS-232 transceiver with two drivers and two receivers, a maximum data rate of 120 kbps, integrated charge-pump circuitry for single +5 V operation, and ±15 kV human-body-model ESD protection in a 16-pin wide SOIC package. The device is intended for bidirectional point-to-point RS-232 and V.28 communications.

An RS-232 transceiver is an interface IC that converts logic-level digital signals into differential, voltage-level signals suitable for RS-232 links, while converting received RS-232 signals back into logic levels. Within the interface hierarchy, the MAX202E belongs to the RS-232 transceiver class of interface ICs, combining line drivers, line receivers, and an integrated charge pump in one package.

Key features include two driver channels, two receiver channels, full-duplex operation, and ±15 kV ESD protection. The integrated charge pump supports operation from a single +5 V supply without external dual-supply generation. Its 120 kbps maximum signaling rate covers conventional RS-232 equipment, industrial serial links, instrumentation, and embedded control systems while providing useful margin above many legacy 960-bit-per-second and 115.2-kbit/s ports.

The MAX202E family is designed to meet EIA/TIA-232E and CCITT V.28 requirements. Maxim describes the MAX202E-MAX213E, MAX232E, and MAX241E family as rugged line-driver and receiver products for RS-232 and V.28 communication in harsh environments. Device variants in the family are distinguished by package, temperature grade, and operating feature combinations, so the exact suffix must be checked before replacing an installed part.

Typical applications include industrial serial controllers, barcode and point-of-sale equipment, test and measurement instruments, laboratory data-acquisition systems, and service-port interfaces. It is particularly useful where a system needs two protected RS-232 ports but lacks negative supply rails. The 16-pin wide SOIC package also supports conventional surface-mount assembly and compact two-channel interface designs.

When laying out the circuit, place the charge-pump capacitors and the interface-side bypass capacitor close to their associated pins. Keep the RS-232 driver outputs away from sensitive receiver inputs, and route the connector-side traces away from clocks, switching supplies, and high-speed digital nets. Confirm the receiver threshold behavior and ensure downstream firmware treats the port as an RS-232, not an RS-485, interface.

This product page combines the manufacturer's interface description with practical replacement criteria, application guidance, package details, and a pin-compatible comparison focused on the MAX202ECWE+T. It helps engineers determine whether the device fits a +5 V RS-232 design before beginning board layout or production sourcing.

এর জন্য ড্রপ-ইন বিকল্প MAX202ECWE+T — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MAX202ECWE+T (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Product Type, Supply Voltage.

Analog Devices
Package: 16-pin wide SOIC
Product Type: RS-232 transceiver
এর সাথে তুলনা করুন MAX202ECWE+T →
Analog Devices
Package: 16-pin SOIC
Product Type: RS-232 transceiver interface IC
Supply Voltage: 4.5 V to 5.5 V
এর সাথে তুলনা করুন MAX202ECWE+T →

MAX202EWE+T

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Analog Devices
📦 16-pin wide SOIC
RS-232 transceiver · 2 channels · 2 channels · 4.5 V to 5.5 V · +5 V · 120 kbps · ±5 V EIA/TIA-232E · 0.1 µF

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX202ECWE+T বিশেষণ

Product Type RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
Duplex Capability Full duplex
Maximum Data Rate 120 kbps
সাপ্লাই ভোল্টেজ +5 V
ESD Protection ±15 kV human body model
Supported Standards EIA/TIA-232E and CCITT V.28
Charge Pump Integrated
প্যাকেজ 16-pin wide SOIC
মাউন্টিং টাইপ Surface mount

MAX202ECWE+T 16-pin wide soic পিন কনফিগারেশন গাইড

MAX202ECWE+T (16-pin wide soic প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

MAX202ECWE+T-এর জন্য 16-pin wide soic প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX202ECWE+T.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MAX202ECWE+T এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Serial Controller Interface, Test and Measurement Equipment, Barcode and Point-of-Sale Terminals, Embedded Data Acquisition Systems, Instrumentation and Service Ports, Legacy Equipment Retrofit.

🏭

Industrial Serial Controller Interface

The MAX202ECWE+T is useful when an industrial controller has a logic-level UART but needs two full-duplex RS-232 ports. Its two drivers and two receivers consolidate four interface functions into one 16-pin wide-SOIC device, while the integrated charge pump permits operation from +5 V without a separate negative rail. The 120 kbps capability covers common 960-bit/s, 19.2-kbit/s, and 115.2-kbit/s industrial protocols. Use the driver outputs for equipment connectors and receiver inputs for incoming control or status commands, with isolation, surge protection, and grounding selected for the installation environment.

🖥️

Test and Measurement Equipment

The MAX202ECWE+T fits laboratory instruments that exchange commands and measurement data with a host computer over RS-232. Two protected driver and receiver channels support bidirectional communication without allocating separate logic families for transmit and receive. Its single +5 V operation simplifies front-panel and portable instrument power design, while EIA/TIA-232E and V.28 compatibility support legacy test equipment. The interface can maintain operation up to 120 kbps, although practical cable length and loading must remain within the RS-232 application constraints. Keep connector-side routing away from precision analog sections.

🔧

Barcode and Point-of-Sale Terminals

The MAX202ECWE+T can connect a point-of-sale controller or barcode terminal to legacy serial peripherals. Two channels allow a compact design to handle both a bidirectional service port and another RS-232 device without duplicating the line-driver and line-receiver circuitry. Operation from a single +5 V rail simplifies terminal power architecture, and ±15 kV HBM protection improves robustness at user-accessible connectors. Firmware should configure the UART for the peripheral's baud rate and framing, while the board provides proper chassis grounding and any required surge suppression for externally routed cables.

📡

Embedded Data Acquisition Systems

The MAX202ECWE+T is appropriate for data-acquisition equipment that must communicate with older laboratory instruments, service controllers, or external sensors using RS-232. The dual-driver, dual-receiver arrangement supports two physical channels on a shared board, and the integrated charge pump avoids adding a negative supply near the analog circuitry. With a maximum rate of 120 kbps, the device covers common acquisition-control rates and offers margin above 115.2 kbit/s operation. Place the interface away from high-impedance sensors and keep the charge-pump and bypass capacitors close to the IC to minimize supply disturbance.

🔧

Instrumentation and Service Ports

The MAX202ECWE+T supports compact service interfaces on instrumentation, programmable power systems, and diagnostic equipment. Its +5 V operation simplifies systems that already derive a 5 V logic rail, while the integrated charge pump supplies the bipolar levels required at the RS-232 driver outputs. Two drivers and two receivers provide flexibility for transmitting commands, receiving status, and implementing full-duplex service links. The 16-pin wide-SOIC package is convenient for conventional PCB assembly, but pin assignments and package dimensions must be checked directly against the selected schematic before layout begins.

🖥️

Legacy Equipment Retrofit

The MAX202ECWE+T helps modernize equipment that retains an RS-232 service port while adopting a +5 V embedded controller. Its EIA/TIA-232E and CCITT V.28 compatibility supports conventional host-to-device communication, and the 120 kbps rate covers common legacy peripheral speeds. The two-channel arrangement can preserve a bidirectional primary port while adding a second diagnostic channel. Because RS-232 is point-to-point rather than a multi-drop bus, keep one driver active on each point-to-point connection and use the logic layer to manage transmit enable timing when sharing a hardware port.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

MAX3232ECDR Texas Instruments ব্যবহৃত হয়: Industrial Serial Controller Interface, Barcode and Point-of-Sale Terminals, Instrumentation and Service Ports MAX232EIDR Texas Instruments ব্যবহৃত হয়: Industrial Serial Controller Interface, Test and Measurement Equipment, Embedded Data Acquisition Systems, Instrumentation and Service Ports, Legacy Equipment Retrofit Z80C1812 Microcontroller platform requiring an RS-232 communications port ব্যবহৃত হয়: Industrial Serial Controller Interface, Test and Measurement Equipment, Barcode and Point-of-Sale Terminals, Embedded Data Acquisition Systems, Instrumentation and Service Ports, Legacy Equipment Retrofit ATF22V10BQL-16T Programmable logic for protocol and control support ব্যবহৃত হয়: Test and Measurement Equipment, Legacy Equipment Retrofit ATF22V10CS-16JU Control logic for protocol and status decoding ব্যবহৃত হয়: Barcode and Point-of-Sale Terminals Z86C9312FSC Communication controller for command processing ব্যবহৃত হয়: Embedded Data Acquisition Systems
What is the MAX202ECWE+T?
The MAX202ECWE+T is a dual-driver, dual-receiver RS-232 transceiver operating from a single +5 V supply. According to the Analog Devices MAX202 product documentation, it supports data rates up to 120 kbps, integrates charge-pump circuitry, and provides ±15 kV human-body-model ESD protection. The device is packaged in a 16-pin wide SOIC and combines two transmit channels with two receive channels for full-duplex serial communication.
What is the operating voltage of MAX202ECWE+T?
The MAX202ECWE+T operates from a single +5 V supply. Its integrated charge pump generates the voltage levels needed by the RS-232 drivers, so the circuit does not require a separate negative supply at the IC. The manufacturer describes the MAX202E family as supporting single +5 V operation while maintaining EIA/TIA-232E output levels at data rates in excess of 120 kbps under the specified loading condition.
How fast is the MAX202ECWE+T RS-232 transceiver?
The MAX202ECWE+T supports RS-232 signaling at up to 120 kbps. According to Analog Devices, the MAX202E family meets EIA/TIA-232E and CCITT V.28 requirements at data rates up to 120 kbps when loaded. This makes the interface suitable for legacy serial peripherals, embedded controllers, and industrial equipment operating at 960 bit/s, 19.2 kbit/s, 57.6 kbit/s, or 115.2 kbit/s.
Does MAX202ECWE+T need a negative supply?
No external negative supply is required for the MAX202ECWE+T because its charge-pump circuitry is integrated. The Analog Devices documentation describes single +5 V operation for the MAX202E family. Place the manufacturer's specified charge-pump capacitors near their associated IC pins and observe the recommended input and output capacitance values to maintain stable RS-232 levels and data-rate performance.
What ESD protection does MAX202ECWE+T provide?
The MAX202ECWE+T provides ±15 kV human-body-model ESD protection. The Mouser product listing describes it as a +5 V RS-232 transceiver with 15 kV ESD protection, while the Analog Devices MAX202E family documentation likewise identifies high ±15 kV HBM protection. Protection levels should be treated as device ratings rather than a guarantee that no external surge or lightning damage can occur.
What package does MAX202ECWE+T use?
The MAX202ECWE+T uses a 16-pin wide SOIC package and is supplied in tape-and-reel form under the +T ordering suffix. Distributor product records identify it as a 16-SOIC RS-232 transceiver. Before ordering a substitute, verify both the 16-pin wide-SOIC footprint and the electrical functions of all pins; a 16-pin narrow SOIC or TSSOP variant is not automatically footprint-compatible.
Where can I download the MAX202ECWE+T datasheet?
The official MAX202ECWE+T documentation is available through the Analog Devices MAX202 product page at https://www.analog.com/en/products/max202.html. The page links to the family datasheet and technical information. Use the manufacturer document to confirm pin assignments, recommended charge-pump capacitors, receiver thresholds, supply-current behavior, operating-temperature limits, and the exact ordering-code interpretation before finalizing a PCB.
Where is the MAX202ECWE+T pinout?
The MAX202ECWE+T pinout is documented in the MAX202E family datasheet on the Analog Devices MAX202 product page. The device has 16 pins in a wide SOIC package, with separate driver outputs, receiver inputs, supply pins, ground connections, and charge-pump capacitor connections. Assign PCB nets from the official pin-description table rather than inferring connections from another MAX202 package option.
What can replace the MAX202ECWE+T?
The closest same-family replacement is MAX202EWE+, which uses the same 16-pin wide-SOIC format and retains two drivers, two receivers, +5 V operation, integrated charge-pump circuitry, and the 120 kbps-capable RS-232 function. The temperature-grade suffix differs, so confirm the required environmental range before substitution. No verified cross-brand pin-compatible alternative was established, and package changes are not drop-in replacements.
Is MAX202EWE+ the same as MAX202ECWE+T?
MAX202EWE+ is a closely related MAX202E-family option, but it is not identical in ordering temperature grade. Both use the 16-pin wide-SOIC format and provide the same core 2/2 RS-232 transceiver function from +5 V with integrated charge-pump circuitry. A replacement remains valid only after checking the official pin table, temperature limits, and any grade-specific qualification requirements.
When should I choose MAX202ECWE+T over MAX202EWE+?
Choose MAX202ECWE+T when its specified commercial temperature grade matches the product's operating environment and the 16-pin wide-SOIC footprint is already designed. Choose MAX202EWE+ when its temperature range better fits the installation and its ordering details satisfy the required qualification level. The core interface parameters remain comparable, so environmental limits and exact suffix verification are the decisive selection factors.
Is MAX202ECWE+T suitable for industrial equipment?
The MAX202ECWE+T is suitable for industrial equipment when its specified temperature range, ESD rating, and interface requirements cover the installation environment. Its +5 V supply, ±15 kV HBM protection, EIA/TIA-232E compatibility, and 120 kbps capability suit protected serial links. Industrial suitability still requires grounding, surge protection, cable routing, and connector selection appropriate to the actual enclosure and cable length.
What are the key specifications of MAX202ECWE+T that engineers should know?
The MAX202ECWE+T is a 2/2 full-duplex RS-232 transceiver with a +5 V supply, 120 kbps maximum data rate, integrated charge pump, ±15 kV HBM ESD protection, EIA/TIA-232E and CCITT V.28 compatibility, and a 16-pin wide-SOIC package. Its key engineering value is combining two protected RS-232 channels with single-supply operation while avoiding an external negative rail.
Where can I buy MAX202ECWE+T?
The MAX202ECWE+T can be requested through the Request a Quote form on this product page. The form is the appropriate route for current commercial terms, availability, quantity breaks, and lead time because these conditions can change with inventory and order volume. Include the exact 16-pin wide-SOIC ordering code MAX202ECWE+T to avoid substitutions with narrow-SOIC, TSSOP, or different temperature-grade suffixes.
What is the price of MAX202ECWE+T?
Current commercial pricing for the MAX202ECWE+T is obtained through the Request a Quote form on this page. Quote requests should specify the required quantity, package form, and target delivery location. Because the exact tape-and-reel suffix and order quantity affect commercial availability, use the form rather than relying on a historical unit-price reference or an unconfirmed generic listing.
What is the lead time and stock status of MAX202ECWE+T?
Current stock and lead time for MAX202ECWE+T should be confirmed through the Request a Quote form on this page. The form can establish the exact order quantity, manufacturing allocation, and delivery commitment for the 16-pin wide-SOIC tape-and-reel configuration. State your required delivery date and annual usage so that the returned commercial proposal reflects the procurement plan.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX202ECWE+T — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose MAX202ECWE+T when the design requires two full-duplex RS-232 channels, a single +5 V supply, and a 16-pin wide-SOIC footprint. Its 120 kbps capability and ±15 kV HBM protection suit conventional industrial, instrumentation, and legacy service-port interfaces. MAX202EWE+ is the closest same-family drop-in option because it retains the 2/2 transceiver configuration, integrated charge pump, +5 V operation, 120 kbps class, and wide-SOIC footprint; verify its temperature-grade suffix before using it. Avoid narrow-SOIC, TSSOP, and DIP MAX202 variants unless the PCB is redesigned. MAX232EIDR or MAX3232ECDR may be considered during new-design evaluation, but they are not listed as direct drop-in alternatives because their channel counts, package footprints, or supply arrangements differ. Final selection should also account for cable length, connector protection, grounding, and the operating-temperature requirements of the installed equipment.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MAX202EWE+
Package 16-pin wide SOIC 16-pin wide SOIC
Brand Analog Devices Analog Devices
Transceiver Configuration 2 drivers and 2 receivers 2 drivers and 2 receivers
Supply Voltage +5 V +5 V
Maximum Data Rate 120 kbps 120 kbps
ESD Protection ±15 kV HBM ±15 kV HBM
Charge Pump Integrated Integrated
Supported Standards EIA/TIA-232E and CCITT V.28 EIA/TIA-232E and CCITT V.28
Manufacturer Ordering Suffix ECWE+T EWE+

মূল পার্থক্যসমূহ

  • Two complete RS-232 channels in one package (বনামMAX202EWE+)
  • Single +5 V interface operation (বনামMAX202EWE+)
  • High-speed protected RS-232 operation (বনামMAX202EWE+)

ডিজাইন নোট

Place the charge-pump capacitors, supply bypass capacitor, and any receiver-input bypass components directly beside their associated pins. Keep the traces short and return each capacitor ground to the nearest device ground connection. This minimizes loop area and helps preserve the required RS-232 output levels and supported data rate under load.

Do not assume that every 16-pin MAX202 ordering option is footprint-compatible. The wide SOIC used by MAX202ECWE+T differs from narrow-SOIC and TSSOP packages even when the transceiver function is similar. Confirm body width, lead pitch, exposed-pad requirements, and every pin assignment in the manufacturer package drawing before changing the component on an existing board.

Route the RS-232 connector-side nets away from clocks, switching-regulator traces, relays, and sensitive analog inputs. Connect the connector shield and equipment ground according to the system grounding strategy rather than arbitrarily tying them at the IC. If a long cable or high-noise industrial environment is involved, evaluate external surge and common-mode protection rather than relying solely on the IC's ±15 kV HBM rating.

Use a +5 V source with low impedance and decouple it near the MAX202ECWE+T. Account for both the transceiver's supply current and the charge-pump-generated driver current when sizing the rail. Keep the RS-232 driver current within the load conditions for which the manufacturer's EIA/TIA-232E compliance and 120 kbps data-rate claims are specified.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The product documentation identifies EIA/TIA-232E and CCITT V.28 interface compliance and ±15 kV HBM ESD protection. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established from the cited pages.

ডেটা যাচাই করা হয়েছে: 2026-11-17 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MAX202ECWE+T datasheet MAX202ECWE+T pinout MAX202ECWE+T datasheet pdf MAX202ECWE+T equivalent MAX202ECWE+T replacement MAX202ECWE+T cross reference MAX202ECWE+T price MAX202ECWE+T stock Analog Devices MAX202ECWE+T MAX202ECWE+T vs MAX202EWE+ MAX202 5V RS-232 transceiver MAX202 16-SOIC RS-232 interface

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices MAX202ECWE+T MAX202EWE+ MAX232EIDR MAX3232ECDR MAX202E RS-232 RS-232 transceiver line driver line receiver interface IC EIA/TIA-232E CCITT V.28 charge pump single +5 V operation ±15 kV HBM ESD protection 120 kbps 16-pin wide SOIC SOIC surface-mount package industrial serial communication test and measurement barcode and point-of-sale terminals data acquisition systems legacy equipment retrofit
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন