Analog Devices

MAX202EESE+T - 120kbps RS-232 Transceiver | Analog Devices

MPN: MAX202EESE+T ✓ نشط
+5V Vdss 16-pin narrow SOIC Package
الحد الأدنى للطلب: 1 |

MAX202EESE+T نظرة عامة

Analog Devices MAX202EESE+T is a 2/2 full-duplex RS-232 transceiver with two drivers and two receivers, data-rate capability up to 120kbps, and ±15kV ESD HBM protection. It operates from a single +5V supply and is packaged in a 16-pin narrow SOIC. The MAX202 family implements the electrical requirements associated with EIA/TIA-232E and CCITT V.28 communications while incorporating the charge-pump circuitry required to generate bipolar RS-232 levels from one supply rail.

An RS-232 transceiver is an interface IC that translates between digital logic levels and the voltage levels used by RS-232 equipment. Within the interface hierarchy, MAX202EESE+T belongs to the RS-232 transceiver family and functions as a physical-layer communications component. The integrated charge pump allows a modern system to communicate with legacy RS-232 peripherals without a separate negative supply, reducing component count and simplifying power-system design.

The device provides two transmit channels and two receive channels, allowing two signal directions to be implemented in one package. Its maximum stated data rate of 120kbps supports short-distance point-to-point serial links when used with an EIA/TIA-232E-compliant load. The ±15kV ESD HBM rating is the principal protection specification highlighted for applications where exposed connectors or cables can introduce electrostatic discharge transients.

The MAX202 architecture integrates the RS-232 line drivers, receivers, and charge-pump circuitry. Its receivers invert the incoming RS-232 signal so the associated digital interface operates with standard active-low logic conventions. This arrangement is suitable for connecting a controller UART or similar logic block to an RS-232 port while keeping the high-voltage interface function in one compact 16-pin package.

Typical applications include industrial serial controllers, point-of-sale equipment, test and measurement instruments, data-acquisition systems, and legacy computer peripherals. The part can also be used in service equipment that must communicate through an existing RS-232 port. For modern USB-to-RS-232 systems, it provides the physical RS-232 layer while a separate interface controller handles USB-to-serial protocol conversion.

Designers should follow the manufacturer's recommended charge-pump capacitor values and place them close to the corresponding pins. The narrow SOIC footprint requires careful orientation because the exposed connector ground, supply rails, and charge-pump components determine signal integrity. Confirm the exact lead assignments, recommended operating conditions, and PCB layout directly against the Analog Devices MAX202E datasheet before releasing a layout.

This product page organizes the core transceiver specifications, verified sourcing information, application guidance, package details, and same-package replacement candidates into one engineering-focused reference. It also identifies the electrical and lifecycle characteristics that should be checked before adopting MAX202EESE+T in a new RS-232 design.

بدائل مباشرة لـ MAX202EESE+T — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع MAX202EESE+T (نفس عامل الشكل والبصمة) — يختلف في ESD Protection, Supply Voltage, Product Type, Package, Maximum Data Rate.

Maxim Integrated
ESD Protection: ±15 kV HBM
Supply Voltage: 5 V
Product Type: 2/2 RS-232 transceiver
قارن مع MAX202EESE+T →
Analog Devices
ESD Protection: ±15 kV HBM
Supply Voltage: +5 V
Product Type: RS-232 line transceiver
قارن مع MAX202EESE+T →
Texas Instruments
ESD Protection: ±15 kV human-body-model protection
Supply Voltage: 5 V nominal
Product Type: 5 V dual RS-232 line driver/receiver
قارن مع MAX202EESE+T →
Texas Instruments
ESD Protection: ±15 kV
Supply Voltage: 5 V
Product Type: Dual RS-232 line driver/receiver transceiver
قارن مع MAX202EESE+T →
Texas Instruments
ESD Protection: ±15 kV human-body-model protection
Supply Voltage: 5 V nominal
Product Type: 5 V dual RS-232 line driver/receiver
قارن مع MAX202EESE+T →

MAX202EESE+

✅ بديل مباشر
Analog Devices
📦 16-pin narrow SOIC
RS-232 line transceiver · 2 · 2 · +5 V · 120 kbps · ±15 kV HBM · EIA/TIA-232E and CCITT V.28 · 16-pin SOIC

تواصل لمعرفة السعر

عرض ورقة البيانات ←

MAX202ECSE+T

✅ بديل مباشر
Maxim Integrated
📦 16-pin narrow SOIC
RS-232 transceiver · 2/2 full-duplex · 2 · 2 · +5 V · 120 kbit/s · 30 V/µs · ±15 kV HBM

تواصل لمعرفة السعر

عرض ورقة البيانات ←

MAX202ECSE.TG096

✅ بديل مباشر
Maxim Integrated
📦 16-pin narrow SOIC
2/2 RS-232 transceiver · 2 · 2 · 5 V · ±15 kV HBM · RS-232 and V.28 · Integrated · 16-pin SOIC

تواصل لمعرفة السعر

عرض ورقة البيانات ←

MAX203EWP+T

✅ بديل مباشر
📦 16-pin narrow SOIC
Same +5V RS-232 family and narrow-SOIC format; MAX203E-family control and capacitor requirements must be checked, with no stated reduction in the 120kbps class

📋 بديل مرجعي (غير موجود في الكتالوج)

MAX203EEW+T

✅ بديل مباشر
📦 16-pin narrow SOIC
Same +5V RS-232 family and narrow-SOIC format; MAX203E-family shutdown and charge-pump details differ while the stated speed class remains compatible

📋 بديل مرجعي (غير موجود في الكتالوج)

MAX202EESE+T المواصفات

Transceiver Configuration 2 driver and 2 receiver channels
Interface Standard RS-232
Communication Compliance EIA/TIA-232E and CCITT V.28
Maximum Data Rate 120kbps
جهد التغذية +5V
ESD Protection ±15kV HBM
Charge Pump Integrated
Driver Output Level ±5V EIA/TIA-232E levels
العلبة 16-pin narrow SOIC
عدد الأطراف 16 pins
نوع التركيب Surface mount
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification unknown

دليل تكوين أطراف MAX202EESE+T 16-pin narrow soic

تكوين الأطراف لـ MAX202EESE+T (حزمة 16-pin narrow soic). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 16-pin narrow soic لـ MAX202EESE+T

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MAX202EESE+T.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

MAX202EESE+T مناسب لـ 6 التطبيقs: Industrial RS-232 Controller Interface, Point-of-Sale Terminal Communication, Test and Measurement Equipment, USB-to-RS-232 Adapter, Data Acquisition and Control System, Legacy Computer Peripheral Connection.

🏭

Industrial RS-232 Controller Interface

MAX202EESE+T fits a compact controller that must communicate with legacy RS-232 instruments through a 16-pin narrow-SOIC interface. Its two drivers and two receivers support bidirectional point-to-point links, while the 120kbps capability is appropriate for command and response traffic. The single +5V architecture removes the need for a separate negative supply, and the integrated charge pump keeps the external power arrangement simple. Designers should place the required charge-pump capacitors according to the manufacturer layout and provide a stable return path through the RS-232 connector.

🔧

Point-of-Sale Terminal Communication

The MAX202EESE+T can provide the physical RS-232 link between a point-of-sale terminal and a peripheral that predates USB. Two transmit and two receive channels are useful for simultaneous command and status paths, while the 120kbps rating comfortably exceeds typical POS configuration traffic. Single +5V operation is convenient for compact equipment with limited power-supply space. The 16-pin narrow SOIC also keeps the interface area modest, although connector clearance and electrostatic-disaster protection remain important at the exposed cable connection.

⚡

Test and Measurement Equipment

MAX202EESE+T is appropriate for laboratory instruments that expose a legacy RS-232 configuration port. The transceiver maintains EIA/TIA-232E and CCITT V.28 compatibility and supports rates up to 120kbps, making it suitable for instrument-control protocols carried over short cables. Its two full-duplex channels can handle command and measurement-result traffic, while ±15kV ESD HBM protection adds an interface-level safeguard when users connect external equipment. Product-level surge and cable protection may still be required for harsher environments.

🌐

USB-to-RS-232 Adapter

MAX202EESE+T can implement the RS-232 side of a USB-to-serial adapter when paired with a USB controller that includes UART signaling. The MAX202 provides the two drivers, two receivers, integrated charge pump, and ±5V EIA/TIA-232E line levels needed at the connector. Its 120kbps capability is suitable for many low- and moderate-speed serial protocols. Board layout must separate connector-side energy from sensitive USB circuitry, and the adapter should include suitable protection for the exposed RS-232 port.

🧩

Data Acquisition and Control System

MAX202EESE+T can connect a data-acquisition controller to external sensors, analyzers, or actuators that use RS-232. Two receive channels support data or status inputs, and two driver channels support commands or control outputs. The 120kbps maximum rate is appropriate for many supervisory control and data-logging links, while the single +5V supply simplifies integration with compact embedded equipment. System designers should verify protocol timing, ground reference, cable length, and connector protection because transceiver specifications alone do not define complete channel reliability.

🖥️

Legacy Computer Peripheral Connection

MAX202EESE+T provides a practical bridge for legacy computer peripherals that retain an RS-232 port while the surrounding product adopts modern digital interfaces. Its integrated charge pump supports a one-rail +5V implementation, reducing the space and assembly burden of external negative-voltage circuitry. The 16-pin narrow-SOIC package supports conventional PCB assembly, and the stated 120kbps rate covers many printer, programmer, and service-port protocols. Compatibility should be confirmed at the protocol, mechanical-connector, and electrical-grounding levels.

What is MAX202EESE+T?
MAX202EESE+T is a 2/2 full-duplex RS-232 transceiver from Analog Devices with two drivers, two receivers, and integrated charge-pump circuitry. According to the Analog Devices MAX202E product information, it operates from a single +5V supply, supports data rates up to 120kbps, and provides ±15kV ESD HBM protection. The device is supplied in a 16-pin narrow SOIC package.
What are the key specifications of MAX202EESE+T that engineers should know?
MAX202EESE+T combines two RS-232 drivers and two receivers in a 16-pin narrow SOIC. According to the Analog Devices MAX202E product page, it supports 120kbps operation, ±5V EIA/TIA-232E output levels, a single +5V supply, and ±15kV ESD HBM protection. The on-chip charge pump eliminates the need for a separate negative supply rail when implementing an RS-232 interface.
What is the operating voltage of MAX202EESE+T?
MAX202EESE+T operates from a single +5V supply. The Analog Devices MAX202E family description identifies single +5V operation as a defining feature, with an integrated charge pump generating the bipolar signal required at the RS-232 interface. Use the manufacturer datasheet for the complete absolute-maximum and recommended supply limits before designing the power rail.
How fast can MAX202EESE+T transmit data?
MAX202EESE+T supports data rates up to 120kbps when the line is loaded in accordance with the EIA/TIA-232E specification. The Analog Devices MAX202 product information specifically states that the drivers maintain ±5V EIA/TIA-232E output levels above 120kbps under the specified load. Cable length, capacitance, grounding, and receiver loading should also be checked in the final channel design.
Where can I download the MAX202EESE+T datasheet PDF?
The official MAX202E datasheet and product resources are available from the Analog Devices MAX202E product page at https://www.analog.com/en/products/max202e.html. Use the manufacturer document for the definitive pin assignments, electrical characteristics, charge-pump capacitor values, package drawings, and recommended PCB layout. Third-party document mirrors can assist discovery, but the Analog Devices document should be the controlling reference for design.
Where can I find the MAX202EESE+T pinout?
The MAX202EESE+T pinout is shown in the pin-description and package-drawing sections of the Analog Devices MAX202E datasheet. The device uses a 16-pin narrow SOIC footprint, so the package drawing must be cross-checked against the PCB land pattern before assembly. Do not infer lead functions solely from the driver and receiver channel names; power, ground, charge-pump, and input-versus-output directions are essential for correct routing.
Is MAX202EESE+T suitable for industrial equipment?
MAX202EESE+T is suitable for industrial and instrumentation interfaces requiring a conventional RS-232 port, subject to environmental qualification for the finished product. Its stated features include a 120kbps data rate, ±15kV ESD HBM protection, and EIA/TIA-232E and CCITT V.28 compatibility. The integrated +5V charge-pump architecture simplifies short-distance point-to-point links, while the final enclosure, cable, grounding, and surge-protection design determines the system-level robustness.
Does MAX202EESE+T need a negative supply voltage?
No. MAX202EESE+T uses an integrated charge pump to develop the required negative voltage from one +5V supply. The Analog Devices MAX202E family description identifies this single-supply architecture as a principal feature. The charge-pump capacitor network still requires the values and placement specified by the manufacturer because incorrect values can affect output levels, startup behavior, and line-driver performance.
What can replace MAX202EESE+T?
A suitable replacement must use the same 16-pin narrow SOIC footprint, preserve the driver and receiver pin functions, and match the critical supply, data-rate, and ESD requirements. Candidates associated with the MAX202E family include MAX202EESE+, MAX202ECSE+T, MAX202ECSE, and MAX203E-family narrow-SOIC devices. Confirm the exact pinout and shutdown-function differences in the manufacturer documentation before treating any candidate as a drop-in replacement.
Can MAX202ECSE+T replace MAX202EESE+T?
MAX202ECSE+T is a close same-family candidate because it uses the same narrow 16-pin SOIC format and belongs to the MAX202E RS-232 transceiver family. Its key identifiers differ from MAX202EESE+T, so production engineers should compare the manufacturer ordering table, pin descriptions, temperature range, and lifecycle status. The device should be approved only after confirming that its electrical limits, charge-pump requirements, and ESD rating satisfy the target design.
MAX202EESE+T vs MAX203E-family parts: which is better for a new design?
Choose MAX202EESE+T when the design specifically calls for the established MAX202E 2/2 RS-232 interface and its verified 16-pin narrow-SOIC implementation. Consider a MAX203E-family device only after reviewing its shutdown, power-management, capacitor, and pin-function characteristics against the schematic. The MAX203E comparison is more attractive when its additional control features solve a system requirement without requiring pin or layout changes.
When should I choose MAX202EESE+T over another RS-232 transceiver?
Choose MAX202EESE+T when the PCB requires a 16-pin narrow-SOIC, two transmitters, two receivers, single +5V operation, and compatibility with the MAX202E interface. It is particularly appropriate for established designs using EIA/TIA-232E or CCITT V.28 links at rates up to 120kbps. Select another candidate only when it offers a required shutdown function, a confirmed lifecycle advantage, or verified compatibility with the existing footprint.
Is MAX202EESE+T suitable for a USB-to-RS-232 adapter?
MAX202EESE+T can form the RS-232 physical layer in a USB-to-RS-232 adapter, but it cannot perform USB-to-serial protocol conversion by itself. A USB controller or bridge must handle the USB transaction layer and UART signaling before the MAX202EESE+T drivers reach the RS-232 connector. The design must also provide proper connector protection, chassis-ground strategy, charge-pump capacitors, and a compliant serial interface.
Where can I buy MAX202EESE+T and what is its lead time?
Use the Request a Quote form on this page to request current availability, price, minimum order quantity, and lead time for MAX202EESE+T. The component is actively offered in a 16-pin narrow SOIC package by authorized distribution channels, but commercial conditions can change by quantity and date. The quote form is the appropriate route for a current purchasing commitment and production allocation.
How much does MAX202EESE+T cost and is it in stock?
Current unit pricing, stock status, and volume breaks for MAX202EESE+T should be obtained through the Request a Quote form on this page. Commercial availability may vary with order quantity and purchasing date, so a historical listing should not be used as a purchasing commitment. The form can provide a current quotation and delivery schedule for the exact 16-pin narrow-SOIC ordering code.
What layout precautions are required for MAX202EESE+T?
Place the manufacturer-recommended charge-pump capacitors close to their specified pins, connect the supply and ground pins with low-impedance traces, and keep the RS-232 driver outputs away from sensitive receiver and logic traces. Analog Devices specifies the supported pinout, capacitor values, and layout pattern in the MAX202E documentation. Use the connector-side return path as part of the interface design because RS-232 performance depends on both electrical levels and channel geometry.

بيانات مرجعية هندسية لـ MAX202EESE+T — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose MAX202EESE+T for a 16-pin narrow-SOIC RS-232 design requiring two drivers, two receivers, single +5V operation, and operation up to 120kbps. MAX202EESE+ and MAX202ECSE+T are same-family alternatives when their exact ordering, temperature, and lifecycle terms better match procurement requirements. MAX202ECSE offers the same package and RS-232 performance class but must be checked against the original manufacturer ordering code. MAX203EWP+T and MAX203EEW+T may be useful when their shutdown or power-management functions add value, but they require careful review of pin functions, charge-pump capacitors, and timing. For every candidate, verify the current manufacturer datasheet, pin assignments, absolute-maximum ratings, and required PCB layout before release.

المقارنة مع البدائل

المعامل هذا المنتج MAX202EESE+ MAX202ECSE+T MAX202ECSE MAX203EWP+T MAX203EEW+T
Package 16-pin narrow SOIC 16-pin narrow SOIC 16-pin narrow SOIC 16-pin narrow SOIC 16-pin narrow SOIC 16-pin narrow SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Supply Voltage +5V +5V +5V +5V +5V +5V
Interface Standard RS-232 RS-232 RS-232 RS-232 RS-232 RS-232
Charge Pump Integrated Integrated Integrated Integrated Integrated Integrated

أبرز الفروقات

  • Combines two full-duplex channels with single-supply operation (مقابلMAX202ECSE+T)
  • Maintains the established MAX202E 120kbps performance class (مقابلMAX203EWP+T)
  • Uses a compact 16-pin narrow-SOIC footprint (مقابلMAX202ECSE)

ملاحظات التصميم

Place the charge-pump capacitors close to the pins identified in the Analog Devices MAX202E datasheet and keep their return-current paths short. The component depends on this network to generate the negative voltage required for RS-232 line levels, so long capacitor traces can increase output distortion or startup problems. Preserve the manufacturer's recommended capacitor values and observe the specified polarity and placement sequence.

Route the RS-232 driver outputs directly toward the connector while keeping them away from receiver inputs and sensitive logic nets. Maintain a continuous signal-ground reference and use the connector shell or chassis-ground strategy appropriate to the product. Although the MAX202E family provides ±15kV ESD HBM protection, the protection rating does not remove the need for an external surge-protection network in severe industrial environments.

Do not treat the MAX202EESE+T as a logic-level UART device; its pins connect to an RS-232 port, and the receiver and driver directions must be matched to the connector. Check that the transceiver is not being powered from a supply outside its recommended range and that both +5V and ground connections are low-impedance. Before production substitution, verify the complete pinout and charge-pump component values because ordering suffixes alone do not establish universal interchangeability.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The family is associated with EIA/TIA-232E and CCITT V.28 interface compliance. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not confirmed in the manufacturer information or other cited records.

تم التحقق من البيانات في: 2026-11-17 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

MAX202EESE+T datasheet MAX202EESE+T pinout MAX202EESE+T specifications MAX202EESE+T equivalent MAX202EESE+T replacement MAX202EESE+T cross reference MAX202EESE+T SOIC-16 MAX202EESE+T 120kbps RS-232 MAX202EESE+T price MAX202EESE+T stock Analog Devices MAX202EESE+T MAX202EESE+T vs MAX202ECSE+T MAX202EESE+T USB RS-232 adapter MAX202EESE+T industrial interface

المكونات والمصطلحات ذات الصلة

Analog Devices MAX202EESE+T MAX202EESE+ MAX202ECSE+T MAX202ECSE MAX203EWP+T MAX203EEW+T RS-232 transceiver line driver line receiver RS-232 EIA/TIA-232E CCITT V.28 charge pump single +5V supply 120kbps data rate ±15kV ESD HBM 16-pin narrow SOIC SOIC package family surface-mount package industrial control data acquisition USB-to-RS-232 adapter test and measurement MAX202E
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر