Analog Devices

MAX202EEWE+ - Dual RS-232 Transceiver | Analog Devices

MPN: MAX202EEWE+ ✓ نشط
4.5 V to 5.5 V Vdss 16-pin SOIC Package
الحد الأدنى للطلب: 1 |

MAX202EEWE+ نظرة عامة

Analog Devices MAX202EEWE+ is a dual RS-232 transceiver with two drivers and two receivers, designed for +5 V serial-interface systems. It supports data rates up to 120 kbps and includes 15 kV ESD protection according to the product listing. The device is packaged in a 16-pin SOIC and is intended for equipment requiring bidirectional RS-232 communication, including industrial control, instrumentation, point-of-sale terminals, and computer peripherals.

An RS-232 transceiver is an interface IC that converts between the differential logic levels used by modern digital electronics and the voltage levels required by RS-232 links. The MAX202EEWE+ combines transmitter and receiver functions in one package, allowing two communications channels to be implemented without using separate driver and receiver ICs. Its +5 V supply operation and external charge-pump capacitor requirement make it appropriate for conventional RS-232 designs rather than modern low-voltage RS-485 or RS-422 interfaces.

The MAX202EEWE+ provides two transmit channels and two receive channels, each with the voltage-level conversion needed for an RS-232 link. The manufacturer describes the MAX202E family as meeting EIA/TIA-232E and CCITT V.28 specifications at data rates up to 120 kbps when loaded. The 15 kV ESD protection helps improve system resilience when cables are connected to exposed ports, although correct board-level layout and connector grounding remain essential.

MAX202EEWE+ uses an external-capacitor charge-pump arrangement to generate the RS-232 level-shifting voltage required by the transmitters. The capacitors should be placed close to the device and routed according to the manufacturer application guidance. The interface operates from a 4.5 V to 5.5 V supply, and the available package information identifies a 16-pin SOIC configuration. It is a surface-mount part suited to compact embedded and industrial equipment.

Typical uses include RS-232 links in test equipment, barcode scanners, printers, programmable logic controllers, security systems, and legacy computer interfaces. The dual-channel architecture can simplify wiring when two ports are required. It is especially useful where the host system uses RS-232 electrical signaling but the product must conserve board area compared with separate driver and receiver packages.

When laying out a MAX202EEWE+ circuit, keep charge-pump capacitor loops compact and connect the device ground to the signal ground using a deliberate, low-impedance strategy. Check the transceiver's supply-decoupling requirements and ensure the selected connector, cable shield, and chassis-ground arrangement meet the applicable ESD and EMI requirements. The device is an interface component, not a power-conversion or signal-conditioning amplifier.

This product summary combines the manufacturer family information with package, interface, protection, and sourcing details for engineers evaluating MAX202EEWE+. It also distinguishes the device from similar RS-232 families by highlighting the dual transceiver arrangement, +5 V operation, 120 kbps maximum data rate, and 15 kV ESD-protection feature. PCB footprint, pin-level connectivity, capacitor selection, and environmental qualification should be confirmed against the current MAX202E documentation before release to production.

بدائل مباشرة لـ MAX202EEWE+ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع MAX202EEWE+ (نفس عامل الشكل والبصمة) — يختلف في Charge Pump, ESD Protection, Package, Product Type, Number of Drivers.

Maxim Integrated
Charge Pump: Integrated dual charge-pump circuitry
ESD Protection: ±15 kV HBM
Package: 16-pin narrow SOIC
قارن مع MAX202EEWE+ →
Analog Devices
Charge Pump: Integrated, no external charge-pump capacitors required
ESD Protection: ±15 kV human body model
Package: 16-pin TSSOP
قارن مع MAX202EEWE+ →

MAX202ECSE+T

✅ بديل مباشر
Maxim Integrated
📦 16-pin SOIC
RS-232 transceiver · 2/2 full-duplex · 2 · 2 · +5 V · 120 kbit/s · 30 V/µs · ±15 kV HBM

تواصل لمعرفة السعر

عرض ورقة البيانات ←

MAX202ECUE+T

✅ بديل مباشر
Analog Devices
📦 16-pin SOIC
Dual RS-232 transceiver with 2 drivers and 2 receivers · 2 channels · 2 channels · 5 V nominal, tolerant of ±10% supply variation · 120 kbps when loaded · EIA/TIA-232E and CCITT V.28 · ±15 kV human body model · Integrated, no external charge-pump capacitors required

تواصل لمعرفة السعر

عرض ورقة البيانات ←

MAX202EWE+

✅ بديل مباشر
📦 16-pin SOIC
Same +5 V MAX202E-family RS-232 function; narrow-SOIC ordering variant requires footprint confirmation

📋 بديل مرجعي (غير موجود في الكتالوج)

MAX202EWE

✅ بديل مباشر
📦 16-pin SOIC
Same dual RS-232 transceiver family and 120 kbps class; exact ordering and qualification details differ

📋 بديل مرجعي (غير موجود في الكتالوج)

MAX201EWE

✅ بديل مباشر
📦 16-pin SOIC
Related MAX201/MAX202 RS-232 transceiver in a 16-pin SOIC; exact electrical and pin-function differences require verification

📋 بديل مرجعي (غير موجود في الكتالوج)

MAX202EEWE+ المواصفات

Product Type Dual RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
معدل البيانات Up to 120 kbps
Supply Voltage Range 4.5 V to 5.5 V
ESD Protection 15 kV
Interface Standard EIA/TIA-232E and CCITT V.28
العلبة 16-pin SOIC
نوع التركيب Surface Mount
Charge Pump External capacitor required
Transmitter Count 2
Receiver Count 2

دليل تكوين أطراف MAX202EEWE+ 16-pin soic

تكوين الأطراف لـ MAX202EEWE+ (حزمة 16-pin soic). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 16-pin soic لـ MAX202EEWE+

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MAX202EEWE+.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

MAX202EEWE+ مناسب لـ 6 التطبيقs: Industrial RS-232 Control Panels, Test and Measurement Equipment, Point-of-Sale and Peripheral Interfaces, Barcode Scanner and Handheld Terminal Connections, Security and Surveillance Equipment, Programmable Controller and Embedded Serial Links.

🏭

Industrial RS-232 Control Panels

MAX202EEWE+ fits industrial control and instrumentation designs that need two bidirectional RS-232 ports on a +5 V supply. Its two drivers and two receivers consolidate four interface functions into one 16-pin SOIC, reducing board area compared with separate line-driver and receiver packages. The 120 kbps rate is suitable for many configuration, monitoring, and service ports. The 15 kV ESD-protection feature adds useful robustness when the panel connects to external cables, although operators should still use a suitable connector and disciplined signal-ground strategy.

🔧

Test and Measurement Equipment

MAX202EEWE+ is appropriate for oscilloscope, logger, and laboratory interface products that communicate with computers or service equipment over RS-232. The dual-channel arrangement allows two devices to share one interface IC when each link requires independent transmit and receive functions. Operation from 4.5 V to 5.5 V aligns with conventional +5 V test equipment, while 120 kbps supports low-to-moderate-speed command and data transfers. Correct charge-pump capacitor placement and short, controlled cable routing are important for stable operation.

🖥️

Point-of-Sale and Peripheral Interfaces

The MAX202EEWE+ can support legacy point-of-sale terminals, barcode scanners, printers, and other peripherals that use RS-232 electrical signaling. Two integrated transmit and receive channels are useful where a product exposes more than one serial connector without allocating a separate IC for each direction. The 15 kV ESD-protection rating is particularly relevant for user-accessible peripheral cables. The design must still account for the RS-232 voltage levels, connector pin assignment, ground reference, and charge-pump capacitor network shown in the manufacturer documentation.

📱

Barcode Scanner and Handheld Terminal Connections

MAX202EEWE+ is suitable for embedded gateways that connect barcode scanners, handheld readers, or payment accessories through RS-232. Its dual transceiver organization supports two complete serial links, while operation up to 120 kbps matches the throughput commonly needed for command exchange and short data reads. The 16-pin SOIC is practical for compact control boards, and the 15 kV ESD protection helps withstand cable transients at an externally accessible connector. Validate the full connector wiring and signal-ground implementation before production.

📹

Security and Surveillance Equipment

MAX202EEWE+ can provide legacy RS-232 connectivity in access-control panels, alarm controllers, and surveillance equipment that must interoperate with older installation infrastructure. The dual-channel configuration allows a controller to maintain two RS-232 links, and the 120 kbps limit is adequate for command traffic rather than high-bandwidth video transport. The 15 kV ESD-protection feature is a meaningful advantage for cables entering an enclosure, but enclosure grounding, surge protection, and cable routing must be addressed separately.

🧩

Programmable Controller and Embedded Serial Links

MAX202EEWE+ is useful in programmable controller boards that retain RS-232 for service consoles, expansion modules, or legacy peripherals. The +5 V supply range and dual-channel architecture support compact legacy interfaces without requiring separate RS-232 driver and receiver packages. Its 120 kbps maximum data rate is appropriate for configuration protocols and short command streams. The charge-pump network requires careful PCB placement, and the complete pinout and capacitor values should be copied from the current manufacturer documentation for the exact ordering code.

ملخص المنتجات الموصى بها

MAX202ECSE+T Maxim Integrated يُستخدم في: Industrial RS-232 Control Panels, Point-of-Sale and Peripheral Interfaces, Security and Surveillance Equipment MAX202ECUE+T Analog Devices يُستخدم في: Industrial RS-232 Control Panels, Test and Measurement Equipment, Point-of-Sale and Peripheral Interfaces, Programmable Controller and Embedded Serial Links MAX202EWE+ Related MAX202E-family transceiver يُستخدم في: Test and Measurement Equipment, Barcode Scanner and Handheld Terminal Connections, Security and Surveillance Equipment MAX202EWE Related MAX202E-family option يُستخدم في: Barcode Scanner and Handheld Terminal Connections MAX201EWE Related family transceiver option يُستخدم في: Programmable Controller and Embedded Serial Links
What is MAX202EEWE+?
MAX202EEWE+ is an Analog Devices dual RS-232 transceiver containing two drivers and two receivers in a 16-pin SOIC package. According to the MAX202E product information, the MAX202E family meets EIA/TIA-232E and CCITT V.28 specifications at data rates up to 120 kbps when loaded. It also provides 15 kV ESD protection for connected serial interfaces.
What is the maximum data rate of MAX202EEWE+?
The MAX202EEWE+ supports data rates up to 120 kbps. Analog Devices states that the MAX202E family meets EIA/TIA-232E and CCITT V.28 requirements at rates up to 120 kbps when loaded. The rate depends on the complete interface, including cable length, load, signal integrity, and the connected equipment.
What is the supply voltage range of MAX202EEWE+?
MAX202EEWE+ operates from a 4.5 V to 5.5 V supply. The published MAX202EWE+ listing identifies a 4.5 V to 5.5 V operating range and identifies the device as a +5 V RS-232 transceiver. The external charge-pump capacitors must be connected according to the manufacturer layout guidance.
Does MAX202EEWE+ provide ESD protection?
Yes. MAX202EEWE+ is identified as an RS-232 transceiver with 15 kV ESD protection. This rating applies to the device's protected interface pins and should be considered together with connector placement, cable routing, grounding, and system-level surge requirements. ESD protection does not remove the need for a properly designed external interface.
How many RS-232 channels does MAX202EEWE+ support?
MAX202EEWE+ combines two transmitters and two receivers, allowing two full-duplex RS-232 channels in one package. The product description identifies the device as a 2-function, 2-driver, 2-receiver RS-232 line transceiver. This integration reduces board area compared with separate driver and receiver packages.
What package does MAX202EEWE+ use?
MAX202EEWE+ uses a 16-pin SOIC package. Distributor product information identifies the device as a 16-SOIC RS-232 transceiver, and the package listing describes a surface-mount SOIC configuration. Use the current manufacturer pin description when assigning PCB nets because the complete pinout is not reproduced on this page.
Where can I find the MAX202EEWE+ datasheet?
The official MAX202E product page is available at https://www.analog.com/en/products/max202e.html. It provides family-level technical information and links to the manufacturer documentation. The product page is the appropriate starting point for confirming the MAX202EEWE+ package, pin assignments, charge-pump capacitor requirements, and electrical limits before designing the PCB.
What is the MAX202EEWE+ pinout?
MAX202EEWE+ uses a 16-pin SOIC, and the manufacturer pin-description table is the authoritative source for the complete pinout. Use the package drawing and pin table in the current MAX202E documentation when assigning the two driver inputs, two receiver outputs, charge-pump terminals, supply pins, and grounds. Do not infer individual pin names from the product summary.
Can MAX202EWE+ replace MAX202EEWE+?
MAX202EWE+ is the closely related narrow-SOIC ordering variant, while MAX202EEWE+ is associated with the wide-SOIC ordering code in comparison listings. Because SOIC body widths can differ, replacement should be confirmed against the actual PCB footprint, pin count, pin names, and package drawing. The similarity of the function and supply specification does not by itself prove footprint compatibility.
What is a drop-in replacement for MAX202EEWE+?
The MAX202E family includes closely related RS-232 transceiver variants, but a drop-in replacement must match the exact 16-pin package width and pin arrangement. MAX202EEWE+ alternatives should therefore be checked against the manufacturer package drawing and the target board footprint. The MAX202ECSE+T and MAX202ECUE+T comparison listings are relevant references, while package dimensions and charge-pump connections must be verified before substitution.
MAX202EEWE+ versus MAX202ECUE+T: which one should I choose?
MAX202EEWE+ and MAX202ECUE+T are both dual RS-232 transceivers associated with the MAX202E family, and comparison data identifies 120 kbps operation and two drivers for both. Their package ordering codes are not interchangeable without checking the physical package width and footprint. Choose the exact ordering code whose package drawing and pinout match the PCB.
MAX202EEWE+ versus MAX201EWE: what is the difference?
MAX202EEWE+ is a +5 V, two-driver/two-receiver RS-232 transceiver rated for data rates up to 120 kbps, while MAX201EWE is a different member of the related MAX201/MAX202 interface family. The family comparison tools identify differences in product specifications and package details. Verify the exact driver, receiver, supply, and capacitor arrangement against the manufacturer documentation rather than substituting solely by function.
When should I choose MAX202EEWE+ over a different RS-232 transceiver?
Choose MAX202EEWE+ when the design needs two +5 V RS-232 channels, up to 120 kbps operation, a 16-pin SOIC footprint, and 15 kV ESD protection. Choose another member of the MAX202E family when its charge-pump arrangement, package width, temperature grade, or specific ordering option better matches the board. The exact footprint and pin description should determine final substitution.
What is the lead time for MAX202EEWE+?
The current lead time for MAX202EEWE+ should be requested through the Request a Quote form on this page. The search results show availability information for related listings, but they do not provide a stable lead-time commitment for the exact ordering code. For production planning, request the current quantity, delivery, and packaging information directly.
Where can I buy MAX202EEWE+ online and what does it cost?
Use the Request a Quote form on this page to inquire about MAX202EEWE+ availability, delivery, and current commercial terms. The product search results show a unit-price reference for the exact MAX202EEWE+ ordering code, but pricing and stock can change. Request the current quantity-break structure and authorized supply details through the quote form.

بيانات مرجعية هندسية لـ MAX202EEWE+ — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose MAX202EEWE+ when the PCB requires a +5 V dual RS-232 interface, two drivers, two receivers, operation up to 120 kbps, and a 16-pin SOIC package. MAX202ECSE+T and MAX202ECUE+T are useful related-family candidates when the ordering or qualification details match the design, but confirm their exact package width, pinout, and charge-pump arrangement. MAX202EWE+ is the closely related narrow-SOIC ordering variant and should only be selected when the physical footprint matches. MAX201EWE may be considered when its different electrical and pin-function details satisfy the system requirements. For every substitution, verify the manufacturer package drawing, pin description, capacitor network, supply limits, and external connector wiring rather than relying on the RS-232 function alone.

المقارنة مع البدائل

المعامل هذا المنتج MAX202ECSE+T MAX202ECUE+T MAX202EWE+ MAX202EWE MAX201EWE
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Type Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver RS-232 transceiver RS-232 transceiver Related RS-232 transceiver

أبرز الفروقات

  • Two transmitters and two receivers in one package (مقابلMAX202ECUE+T)
  • 120 kbps data-rate class (مقابلMAX202ECSE+T)
  • 15 kV ESD protection (مقابلMAX202EWE)

ملاحظات التصميم

Place the charge-pump capacitors close to the MAX202EEWE+ capacitor pins and keep the associated traces short. Route the charge-pump network away from sensitive analog and high-speed digital areas where possible. The exact capacitor values and topology must follow the manufacturer application diagram for the selected package and ordering code.

Do not treat any MAX202E-family ordering code as automatically interchangeable with MAX202EEWE+. SOIC body width, pin assignments, ordering suffix, and qualification details can differ between listings. Before replacing the component, compare the package drawing, pin names, electrical limits, and charge-pump connections against the original PCB footprint.

RS-232 cables can carry transient energy into the enclosure. Keep the connector and transceiver path separated from sensitive circuitry, use a controlled ground reference, and follow the ESD-protection guidance in the manufacturer documentation. The 15 kV ESD rating is a device-level protection characteristic, not a complete system surge-design specification.

Provide local supply decoupling and verify the selected capacitor type, voltage rating, and placement against the MAX202E datasheet. Avoid long copper loops around the charge-pump network. For cable-connected products, use the connector shield and chassis or enclosure grounding strategy appropriate to the installation rather than relying solely on the IC pinout.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The supplied product information identifies 15 kV ESD protection and the MAX202E family specifications, but does not provide a definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration.

تم التحقق من البيانات في: 2026-11-13 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

MAX202EEWE+ datasheet MAX202EEWE+ pinout MAX202EEWE+ datasheet pdf MAX202EEWE+ equivalent MAX202EEWE+ replacement MAX202EEWE+ vs MAX202ECUE+T MAX202EEWE+ SOIC-16 MAX202EEWE+ RS-232 120 kbps MAX202EEWE+ ESD 15 kV MAX202EEWE+ charge pump capacitors Analog Devices MAX202EEWE+ MAX202EEWE+ price

المكونات والمصطلحات ذات الصلة

Analog Devices Maxim Integrated MAX202EEWE+ MAX202E MAX202ECSE+T MAX202ECUE+T MAX202EWE+ MAX202EWE MAX201EWE RS-232 transceiver RS-232 interface IC dual transmitter receiver EIA/TIA-232E CCITT V.28 ESD protection 15 kV ESD 120 kbps 4.5 V to 5.5 V external charge-pump capacitor 16-pin SOIC surface mount industrial control test equipment point-of-sale barcode scanner security equipment
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر