MAX202EEWE+ - Dual RS-232 Transceiver | Analog Devices
MPN: MAX202EEWE+ ✓ AktifMAX202EEWE+ Ringkasan
An RS-232 transceiver is an interface IC that converts between the differential logic levels used by modern digital electronics and the voltage levels required by RS-232 links. The MAX202EEWE+ combines transmitter and receiver functions in one package, allowing two communications channels to be implemented without using separate driver and receiver ICs. Its +5 V supply operation and external charge-pump capacitor requirement make it appropriate for conventional RS-232 designs rather than modern low-voltage RS-485 or RS-422 interfaces.
The MAX202EEWE+ provides two transmit channels and two receive channels, each with the voltage-level conversion needed for an RS-232 link. The manufacturer describes the MAX202E family as meeting EIA/TIA-232E and CCITT V.28 specifications at data rates up to 120 kbps when loaded. The 15 kV ESD protection helps improve system resilience when cables are connected to exposed ports, although correct board-level layout and connector grounding remain essential.
MAX202EEWE+ uses an external-capacitor charge-pump arrangement to generate the RS-232 level-shifting voltage required by the transmitters. The capacitors should be placed close to the device and routed according to the manufacturer application guidance. The interface operates from a 4.5 V to 5.5 V supply, and the available package information identifies a 16-pin SOIC configuration. It is a surface-mount part suited to compact embedded and industrial equipment.
Typical uses include RS-232 links in test equipment, barcode scanners, printers, programmable logic controllers, security systems, and legacy computer interfaces. The dual-channel architecture can simplify wiring when two ports are required. It is especially useful where the host system uses RS-232 electrical signaling but the product must conserve board area compared with separate driver and receiver packages.
When laying out a MAX202EEWE+ circuit, keep charge-pump capacitor loops compact and connect the device ground to the signal ground using a deliberate, low-impedance strategy. Check the transceiver's supply-decoupling requirements and ensure the selected connector, cable shield, and chassis-ground arrangement meet the applicable ESD and EMI requirements. The device is an interface component, not a power-conversion or signal-conditioning amplifier.
This product summary combines the manufacturer family information with package, interface, protection, and sourcing details for engineers evaluating MAX202EEWE+. It also distinguishes the device from similar RS-232 families by highlighting the dual transceiver arrangement, +5 V operation, 120 kbps maximum data rate, and 15 kV ESD-protection feature. PCB footprint, pin-level connectivity, capacitor selection, and environmental qualification should be confirmed against the current MAX202E documentation before release to production.
Alternatif penggantian untuk MAX202EEWE+ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MAX202EEWE+ (sama faktor bentuk dan footprint) — berbeda di dalam Charge Pump, ESD Protection, Package, Product Type, Number of Drivers.
MAX202ECSE+T
✅ Drop-InKontak untuk harga
Lihat Datasheet →MAX202ECUE+T
✅ Drop-InKontak untuk harga
Lihat Datasheet →MAX202EWE+
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MAX202EWE
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MAX201EWE
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MAX202EEWE+ Spesifikasi
| Product Type | Dual RS-232 transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Laju Data | Up to 120 kbps |
| Supply Voltage Range | 4.5 V to 5.5 V |
| ESD Protection | 15 kV |
| Interface Standard | EIA/TIA-232E and CCITT V.28 |
| Paket | 16-pin SOIC |
| Tipe Mounting | Surface Mount |
| Charge Pump | External capacitor required |
| Transmitter Count | 2 |
| Receiver Count | 2 |
MAX202EEWE+ 16-pin soic Diamant Konfigurasi Panduan
Konfigurasi pin untuk MAX202EEWE+ (16-pin soic pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk MAX202EEWE+.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
MAX202EEWE+ cocok untuk 6 aplikasis: Industrial RS-232 Control Panels, Test and Measurement Equipment, Point-of-Sale and Peripheral Interfaces, Barcode Scanner and Handheld Terminal Connections, Security and Surveillance Equipment, Programmable Controller and Embedded Serial Links.
Industrial RS-232 Control Panels
MAX202EEWE+ fits industrial control and instrumentation designs that need two bidirectional RS-232 ports on a +5 V supply. Its two drivers and two receivers consolidate four interface functions into one 16-pin SOIC, reducing board area compared with separate line-driver and receiver packages. The 120 kbps rate is suitable for many configuration, monitoring, and service ports. The 15 kV ESD-protection feature adds useful robustness when the panel connects to external cables, although operators should still use a suitable connector and disciplined signal-ground strategy.
Direkomendasikan
Test and Measurement Equipment
MAX202EEWE+ is appropriate for oscilloscope, logger, and laboratory interface products that communicate with computers or service equipment over RS-232. The dual-channel arrangement allows two devices to share one interface IC when each link requires independent transmit and receive functions. Operation from 4.5 V to 5.5 V aligns with conventional +5 V test equipment, while 120 kbps supports low-to-moderate-speed command and data transfers. Correct charge-pump capacitor placement and short, controlled cable routing are important for stable operation.
Direkomendasikan
Point-of-Sale and Peripheral Interfaces
The MAX202EEWE+ can support legacy point-of-sale terminals, barcode scanners, printers, and other peripherals that use RS-232 electrical signaling. Two integrated transmit and receive channels are useful where a product exposes more than one serial connector without allocating a separate IC for each direction. The 15 kV ESD-protection rating is particularly relevant for user-accessible peripheral cables. The design must still account for the RS-232 voltage levels, connector pin assignment, ground reference, and charge-pump capacitor network shown in the manufacturer documentation.
Direkomendasikan
Barcode Scanner and Handheld Terminal Connections
MAX202EEWE+ is suitable for embedded gateways that connect barcode scanners, handheld readers, or payment accessories through RS-232. Its dual transceiver organization supports two complete serial links, while operation up to 120 kbps matches the throughput commonly needed for command exchange and short data reads. The 16-pin SOIC is practical for compact control boards, and the 15 kV ESD protection helps withstand cable transients at an externally accessible connector. Validate the full connector wiring and signal-ground implementation before production.
Direkomendasikan
Security and Surveillance Equipment
MAX202EEWE+ can provide legacy RS-232 connectivity in access-control panels, alarm controllers, and surveillance equipment that must interoperate with older installation infrastructure. The dual-channel configuration allows a controller to maintain two RS-232 links, and the 120 kbps limit is adequate for command traffic rather than high-bandwidth video transport. The 15 kV ESD-protection feature is a meaningful advantage for cables entering an enclosure, but enclosure grounding, surge protection, and cable routing must be addressed separately.
Direkomendasikan
Programmable Controller and Embedded Serial Links
MAX202EEWE+ is useful in programmable controller boards that retain RS-232 for service consoles, expansion modules, or legacy peripherals. The +5 V supply range and dual-channel architecture support compact legacy interfaces without requiring separate RS-232 driver and receiver packages. Its 120 kbps maximum data rate is appropriate for configuration protocols and short command streams. The charge-pump network requires careful PCB placement, and the complete pinout and capacitor values should be copied from the current manufacturer documentation for the exact ordering code.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MAX202EEWE+ — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MAX202ECSE+T | MAX202ECUE+T | MAX202EWE+ | MAX202EWE | MAX201EWE |
|---|---|---|---|---|---|---|
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Type | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | Related RS-232 transceiver |
Diferensiator Kunci
- Two transmitters and two receivers in one package (vsMAX202ECUE+T)
- 120 kbps data-rate class (vsMAX202ECSE+T)
- 15 kV ESD protection (vsMAX202EWE)
Catatan Desain
Place the charge-pump capacitors close to the MAX202EEWE+ capacitor pins and keep the associated traces short. Route the charge-pump network away from sensitive analog and high-speed digital areas where possible. The exact capacitor values and topology must follow the manufacturer application diagram for the selected package and ordering code.
Do not treat any MAX202E-family ordering code as automatically interchangeable with MAX202EEWE+. SOIC body width, pin assignments, ordering suffix, and qualification details can differ between listings. Before replacing the component, compare the package drawing, pin names, electrical limits, and charge-pump connections against the original PCB footprint.
RS-232 cables can carry transient energy into the enclosure. Keep the connector and transceiver path separated from sensitive circuitry, use a controlled ground reference, and follow the ESD-protection guidance in the manufacturer documentation. The 15 kV ESD rating is a device-level protection characteristic, not a complete system surge-design specification.
Provide local supply decoupling and verify the selected capacitor type, voltage rating, and placement against the MAX202E datasheet. Avoid long copper loops around the charge-pump network. For cable-connected products, use the connector shield and chassis or enclosure grounding strategy appropriate to the installation rather than relying solely on the IC pinout.
Informasi Konformitas
The supplied product information identifies 15 kV ESD protection and the MAX202E family specifications, but does not provide a definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration.