MAX211CWI+T - 4/5 RS-232 Transceiver, 120kbps | Analog Devices
MPN: MAX211CWI+T ✓ نشطMAX211CWI+T نظرة عامة
An RS-232 transceiver is an interface IC that combines drivers and receivers for point-to-point serial communication. In this device family, the transmitter converts TTL or CMOS logic signals into EIA/TIA-232E levels, and the receiver converts bipolar serial data back into logic levels. The MAX211 family belongs to the broader RS-232 interface category within interface ICs and semiconductor communication devices.
The principal features are four drivers, five receivers, operation from a single +5V supply, data rates above 120kbps, and driver output levels of ±5V under the specified EIA/TIA-232E load. The integrated charge-pump circuitry eliminates the need for a separate negative supply rail, while shutdown support permits the device to be placed into a low-power state when communication is not required.
The MAX211 architecture separates the interface into charge-pump voltage conversion, driver, receiver, and control sections. Four 0.1µF external capacitors are specified for operation with the charge-pump circuitry. This arrangement supports compact single-supply RS-232 designs while preserving familiar bipolar signaling at the connector and cable interface.
Typical uses include industrial serial links, data-acquisition equipment, point-of-sale systems, test equipment, and embedded control systems that exchange RS-232 signals over cable. The interface is especially appropriate when legacy equipment expects ±5V RS-232 levels but the internal system supplies only +5V logic power.
When laying out the circuit, place the four 0.1µF charge-pump capacitors close to their specified pins and keep the device ground connection compact. Confirm that the selected connector and cable interface use EIA/TIA-232E signal levels rather than RS-422 or RS-485, since the logic levels and voltage polarity are not interchangeable.
This product summary combines the manufacturer's electrical and package details with application guidance, pinout considerations, comparison criteria, and design notes intended to help engineers shorten evaluation and prototype time. For purchasing decisions, request a quote on this page for current commercial terms and manufacturing support.
بدائل مباشرة لـ MAX211CWI+T — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع MAX211CWI+T (نفس عامل الشكل والبصمة) — يختلف في Supply Voltage, Package, Communication Standard, Product Type.
MAX211ECWI+T
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
MAX213CWI+T
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
MAX211CWI+
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←MAX211ECWI+
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←MAX213ECWI+T
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
MAX211CWI+T المواصفات
| Product Type | 4/5 RS-232 transceiver |
| Driver Count | 4 drivers |
| Receiver Count | 5 receivers |
| جهد التغذية | +5 V |
| Maximum Data Rate | In excess of 120kbps |
| Driver Output Signal Level | ±5 V |
| Communication Standard | EIA/TIA-232E |
| Protocol | RS-232 / V.28 |
| Charge Pump | Integrated |
| External Capacitor Quantity | 4 capacitors |
| External Capacitor Value | 0.1µF |
| العلبة | 28-pin wide SOIC |
| نوع التركيب | Surface mount |
دليل تكوين أطراف MAX211CWI+T 28-pin wide soic
تكوين الأطراف لـ MAX211CWI+T (حزمة 28-pin wide soic). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MAX211CWI+T.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MAX211CWI+T مناسب لـ 6 التطبيقs: Industrial RS-232 Control Links, Point-of-Sale Terminal Interfaces, Data-Acquisition Equipment, Embedded Service Interfaces, Test and Measurement Systems, Network Management and Maintenance Ports.
Industrial RS-232 Control Links
The MAX211CWI+T fits legacy industrial controllers, barcode equipment, and service interfaces that require RS-232 communication from a single +5V supply. Its four drivers and five receivers support several channels on one board without separate negative supply rails. The integrated charge pump produces the bipolar signal levels required by EIA/TIA-232E receivers, while operation above 120kbps accommodates moderately high-speed legacy links. Keep the four 0.1µF capacitors close to their associated pins and provide a low-impedance ground path to the connector to minimize common-impedance disturbances.
موصى به
Point-of-Sale Terminal Interfaces
Point-of-sale systems often combine a host processor with printers, scanners, and customer displays connected through established RS-232 ports. The MAX211CWI+T provides four transmitters and five receivers, allowing multiple point-to-point channels while accepting a compact single +5V system supply. Its ±5V EIA/TIA-232E driver levels and data rates in excess of 120kbps support common serial peripheral arrangements. Validate each cable length, baud rate, grounding method, and connector pin assignment because legacy RS-232 implementations vary in flow control and signal naming.
موصى به
Data-Acquisition Equipment
Laboratory and industrial data-acquisition units can use the MAX211CWI+T to connect a controller to RS-232 instruments, adapters, and service ports. The five receivers provide flexible channel availability for status, request, and data signals, while four drivers cover common command outputs. A single +5V supply simplifies instrumentation power architecture, and the integrated charge pump avoids external negative rail generation. Because the interface supports data rates in excess of 120kbps, engineers can evaluate faster legacy links while still checking the cable, termination, grounding, and receiver-load constraints of the complete system.
موصى به
Embedded Service Interfaces
Embedded equipment often retains an RS-232 service port for configuration, diagnostics, or firmware recovery even when its main processor uses modern high-speed serial links. The MAX211CWI+T adds four drivers and five receivers in a 28-pin wide SOIC package without requiring a separate ±12V supply. Its integrated charge-pump circuitry supports single +5V operation, while the 120kbps-class performance is suitable for many configuration protocols. Provide controlled access to the service connector and review the maximum cable length and ground-reference arrangement to avoid functional problems in deployed installations.
موصى به
Test and Measurement Systems
The MAX211CWI+T can bridge a test controller to legacy instruments that use only RS-232 communication. Four driver channels and five receiver channels allow command, trigger, measurement, and status signals to be consolidated on one interface IC. Operation from +5V simplifies instrument subassembly design, and the integrated charge pump generates the required bipolar transmit levels. At data rates in excess of 120kbps, the device can support fast legacy transfer modes, although cable routing, grounding, shielding, and loading still determine practical reliability in laboratory environments.
موصى به
Network Management and Maintenance Ports
Networked appliances and communication equipment can retain an RS-232 maintenance channel for initial configuration and field diagnostics. The MAX211CWI+T is suited to this role because it provides several receive and transmit channels from one +5V supply while maintaining ±5V EIA/TIA-232E output levels. The 28-pin wide SOIC package allows a compact implementation, and data rates above 120kbps support routine configuration transfers. Design the maintenance connector for dependable grounding, avoid long unprotected cable runs, and confirm that the equipment's administrative software uses compatible baud rates, parity, and flow-control settings.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ MAX211CWI+T — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | MAX211ECWI+T | MAX213CWI+T | MAX211CWI | MAX211ECWI | MAX213ECWI+T |
|---|---|---|---|---|---|---|
| Package | 28-SOIC | 28-SOIC - same | 28-SOIC - same | 28-SOIC - same | 28-SOIC - same | 28-SOIC - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Supply Voltage | +5 V | +5 V | +5 V | +5 V | +5 V | +5 V |
| Shipping Format Suffix | +T tape-and-reel format | +T tape-and-reel format | +T tape-and-reel format | Non +T ordering option | Non +T ordering option | +T tape-and-reel format |
أبرز الفروقات
- Single-supply operation with four-driver and five-receiver integration (مقابلMAX211ECWI+T)
- Established MAX211 function with more than 120kbps data-rate capability (مقابلMAX213CWI+T)
- Four integrated external-capacitor charge-pump interface (مقابلMAX211CWI)
ملاحظات التصميم
Place the four specified 0.1µF charge-pump capacitors close to the pins identified in the manufacturer datasheet. Keep their ground returns short and connect them to a quiet ground plane region rather than routing through the logic return path. The MAX211CWI+T uses a single +5V supply, so minimizing capacitor-loop area also reduces switching current in the charge-pump section and helps maintain stable driver output levels.
Keep the 28-pin wide SOIC close to the RS-232 connector and separate the charge-pump region from sensitive analog or high-speed digital traces. Route each driver and receiver signal according to the system ground-reference plan, and avoid sharing narrow return paths between the interface connector and unrelated loads. Review every connector pin against the manufacturer datasheet because legacy RS-232 equipment may use different signal names for the same connector positions.
Do not substitute an RS-422 or RS-485 interface solely because the connector shape is similar. The MAX211CWI+T produces bipolar ±5V EIA/TIA-232E signals, whereas differential interfaces use different voltage relationships and termination practices. Also verify shutdown polarity, enable timing, receiver enable state, cable length, and grounding before releasing the board for production.
معلومات الامتثال
The MAX211 is a commercial interface IC rather than an automotive-qualified device; specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations should be confirmed from current manufacturer product documentation.