Analog Devices

MAX232CWE+T - Dual RS-232 Transceiver | Analog Devices

MPN: MAX232CWE+T ✓ نشط
+5 V Vdss 16-pin wide SOIC (WSOIC) Package
الحد الأدنى للطلب: 1 |

MAX232CWE+T نظرة عامة

The Analog Devices MAX232CWE+T is a +5 V-powered, dual RS-232 line-driver and receiver IC providing one full-duplex RS-232 port in a 16-pin wide SOIC package. It supports data rates up to 120 kbps and targets EIA/TIA-232E, V.28, and V.24 communications interfaces. Its integrated charge-pump circuitry generates the positive and negative voltages required by RS-232 without a separate external power supply.

An RS-232 transceiver is an interface IC that converts logic-level signals into differential bipolar RS-232 levels and converts received bipolar signals back into CMOS-compatible logic. The MAX232CWE+T belongs to the line-driver and receiver hierarchy, providing the physical-layer functions required to connect a UART, microcontroller, or embedded controller to a serial port. It is particularly useful where the system cannot provide the positive and negative rails normally associated with RS-232 equipment.

Key features include two driver channels, two receiver channels, a single +5 V supply, and operation at 120 kbps. The charge-pump design permits RS-232 communication with only +5 V power, eliminating a dual-supply requirement and reducing board-level complexity. The wide SOIC package is a standard surface-mount option with adequate lead pitch for automated assembly and hand-soldering.

The device uses five external charge-pump capacitors to develop the bipolar voltage levels required for reliable transmission. Designers should place these capacitors close to the associated device pins and follow the connection arrangement in the manufacturer datasheet. Short, direct signal paths on the printed circuit board help limit ringing, reduce radiated emissions, and preserve the receiver's input threshold margin.

Typical uses include industrial serial consoles, instrumentation links, service equipment, barcode readers, point-of-sale terminals, and legacy peripheral connections. The MAX232CWE+T is appropriate where a +5 V system must communicate over an RS-232 cable with a host computer or controller while avoiding the older +12 V and -12 V supply architecture.

Choose this part when the required data rate is 120 kbps or lower and a 16-pin wide SOIC footprint is already on the PCB. Verify signal levels, cable length, grounding, and receiver thresholds at the system level, because RS-232 is a single-ended interface that depends on a common reference between connected equipment.

This page combines the manufacturer interface description with practical component comparison, pin-level implementation guidance, and design notes covering charge-pump capacitors, grounding, transmission limits, and second-source evaluation.

بدائل مباشرة لـ MAX232CWE+T — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع MAX232CWE+T (نفس عامل الشكل والبصمة) — يختلف في Product Type, Package, Maximum Data Rate, Number of Receivers, Number of Drivers.

Analog Devices
Product Type: RS-232 transceiver
Package: 16-pin wide SOIC
قارن مع MAX232CWE+T →
Analog Devices
Package: 16-pin Narrow SOIC (SOIC-N-16)
قارن مع MAX232CWE+T →
Texas Instruments
Product Type: Dual RS-232 driver/receiver transceiver
Maximum Data Rate: 250 kbps
Number of Receivers: 2 receivers
قارن مع MAX232CWE+T →
Analog Devices
Product Type: Dual RS-232 transceiver
Package: 16-pin SOIC
Number of Receivers: 2 channels
قارن مع MAX232CWE+T →
Maxim Integrated
Product Type: RS-232 transceiver interface IC
Package: 16-pin wide SOIC
قارن مع MAX232CWE+T →
Texas Instruments
Package: 16-pin SOIC
Maximum Data Rate: 120 kbit/s
قارن مع MAX232CWE+T →
Maxim Integrated
Product Type: Dual RS-232 transmitter/receiver interface IC
Package: 16-pin SOIC
MaxLinear
Package: 16-SOIC
Maximum Data Rate: 120 kbps under load

SP232ACT-L/TR

✅ بديل مباشر
MaxLinear
📦 16-pin SOIC
RS-232 transceiver · 2 · 2 · EIA/TIA-232 and V.28 · 120 kbps under load · 10 V/µs · +5 V · +6.5 V and -6.5 V

تواصل لمعرفة السعر

عرض ورقة البيانات ←

MAX232CWE+T المواصفات

Product Type RS-232 line-driver and receiver transceiver
Number of Drivers 2
Number of Receivers 2
Duplex Mode Full duplex
Maximum Data Rate 120 kbps
جهد التغذية +5 V
Interface Standard EIA/TIA-232E, V.28, and V.24
العلبة 16-pin wide SOIC (WSOIC)
نوع التركيب Surface mount
External Charge-Pump Capacitors 5
حالة RoHS unknown
REACH Status unknown
Lead-Free Status unknown
Automotive Qualification Not applicable
Shipping Configuration Tape and reel

تكوين أطراف MAX232CWE+T

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
دبوس 1 R1OUT — Receiver 1 logic output
دبوس 2 R1IN — Receiver 1 RS-232 input
دبوس 3 R2OUT — Receiver 2 logic output
دبوس 4 R2IN — Receiver 2 RS-232 input
دبوس 5 T2IN — Driver 2 logic input
دبوس 6 T1IN — Driver 1 logic input
دبوس 7 V+ — Positive charge-pump supply node
دبوس 8 GND — Ground connection
دبوس 9 V- — Negative charge-pump output
دبوس 10 T1OUT — Driver 1 RS-232 output
دبوس 11 T2OUT — Driver 2 RS-232 output
دبوس 12 NC — Not connected
دبوس 13 NC — Not connected
دبوس 14 NC — Not connected
دبوس 15 GND — Ground connection
دبوس 16 V+ — Positive charge-pump supply node

التطبيقات النموذجية

MAX232CWE+T مناسب لـ 6 التطبيقs: Industrial Serial Console, Laboratory Instrument Interface, Point-of-Sale Terminal Connection, Embedded Service and Configuration Port, Legacy Peripheral Data Link, Telemetry and Equipment Communication.

🏭

Industrial Serial Console

The MAX232CWE+T is well suited to an industrial console or service port that must connect a controller running at 5 V logic levels to a legacy RS-232 terminal. Its two drivers and two receivers support one full-duplex link, and the 120 kbps limit matches many administrative protocols, maintenance ports, and configuration interfaces. The integrated charge pump derives the required bipolar levels from one +5 V rail. Place the five charge-pump capacitors close to the device and route the cable-side traces away from sensitive analog and clock circuitry to limit radiated coupling.

🔧

Laboratory Instrument Interface

Laboratory instruments and automated test equipment often retain RS-232 even when their internal controller operates with modern low-voltage logic. The MAX232CWE+T provides the required physical conversion while operating from +5 V, avoiding a separate +12 V and -12 V supply arrangement. Its 120 kbps rate suits command and measurement-data links that do not require continuous high-bandwidth transfer. Use a defined logic ground near the transceiver and verify the common-mode voltage range at the cable connector, because RS-232 is a single-ended interface sensitive to ground-potential differences.

🖥️

Point-of-Sale Terminal Connection

Point-of-sale terminals, receipt printers, barcode readers, and payment accessories frequently use RS-232 for short cable-based command links. The MAX232CWE+T fits a +5 V embedded controller that needs transmit and receive channels in one compact 16-pin SOIC package. A 120 kbps rate is appropriate for short transactions and configuration commands rather than high-volume imaging data. Confirm the cable length and receiver threshold margin, and keep the RS-232 trace pair separated from motor, relay, and switching-power-supply routing to avoid command errors.

🌐

Embedded Service and Configuration Port

An embedded controller can use the MAX232CWE+T to expose a field-service configuration port that is accessible with a standard RS-232 cable. The device converts logic-level UART signals in both directions and eliminates the need for external bipolar supply rails. Its 120 kbps rate is sufficient for firmware menus, diagnostics, and short configuration transfers. Implement an enclosure ground reference or isolation strategy where the connected equipment can sit at a different earth potential, and use the datasheet's receiver threshold limits to define the acceptable common-mode range.

📱

Legacy Peripheral Data Link

The MAX232CWE+T connects modern +5 V logic to printers, programmers, scales, and other legacy peripherals that expose RS-232 ports. Because the device includes two transmitters and two receivers, one port can handle bidirectional command and response traffic while leaving the other direction available for status or flow-control signaling. The 120 kbps maximum rate suits legacy control protocols. Verify the peripheral's driver and receiver voltage levels, handshaking requirements, and pin assignment before finalizing the cable adapter and software protocol.

📡

Telemetry and Equipment Communication

MAX232CWE+T can serve as the local RS-232 interface in telemetry, remote-monitoring, and equipment-communication modules built around a low-voltage microcontroller or embedded processor. The single +5 V supply arrangement simplifies powering the interface in compact control boards, while the integrated charge pump supplies the bipolar levels needed by the RS-232 drivers. Use it for status reports and configuration traffic at or below 120 kbps. Shield long cable runs appropriately, provide a stable signal-ground reference, and apply the receiver threshold limits when designing a multi-drop or distributed installation.

ملخص المنتجات الموصى بها

MAX232CWE Same MAX232 device family in a non-tape-and-reel ordering format يُستخدم في: Industrial Serial Console, Laboratory Instrument Interface, Point-of-Sale Terminal Connection, Embedded Service and Configuration Port, Legacy Peripheral Data Link, Telemetry and Equipment Communication MAX232CWE-T Base MAX232CWE ordering designation يُستخدم في: Industrial Serial Console, Laboratory Instrument Interface, Point-of-Sale Terminal Connection, Embedded Service and Configuration Port, Legacy Peripheral Data Link, Telemetry and Equipment Communication
What is the MAX232CWE+T used for?
The MAX232CWE+T is a +5 V-powered, dual RS-232 transceiver with two driver channels and two receiver channels. It converts CMOS/TTL UART logic into RS-232 bipolar levels and converts incoming RS-232 signals back into logic levels. According to the manufacturer datasheet, it is intended for EIA/TIA-232E, V.28, and V.24 interfaces and supports data rates up to 120 kbps.
What is the maximum data rate of MAX232CWE+T?
The MAX232CWE+T supports a maximum signaling rate of 120 kbps, as stated in the Analog Devices MAX220-MAX249 datasheet and the manufacturer product listing. This rate is suitable for legacy serial ports, industrial consoles, and short-distance equipment links. Higher-rate RS-232 transceivers should be selected when the UART clock rate and cable characteristics exceed the 120 kbps operating limit.
Where can I buy MAX232CWE+T online?
Use the Request a Quote form on this page to request MAX232CWE+T availability, current commercial terms, and an order quotation from XAIPART. The part is a 16-SOIC, +5 V RS-232 transceiver offered in a tape-and-reel shipping configuration. The quote form allows the requested quantity, target lead time, and shipment destination to be stated with the order.
What is the price of MAX232CWE+T?
Current MAX232CWE+T pricing is calculated for the requested quantity and delivered through the Request a Quote form on this page. The structured commercial data on this page separates market pricing from technical specifications, so it does not embed a static unit figure in the product description. Submit the required quantity and shipment details to obtain a quotation tied to a current purchasing review.
What is the lead time for MAX232CWE+T?
Request the current lead time through the Request a Quote form on this page, including your required order quantity and destination. Lead time can vary with purchasing volume, inventory position, and shipment routing, so it should be confirmed as part of the order rather than inferred from a generic product listing. The MAX232CWE+T is manufactured in a 16-pin wide SOIC package and is distributed in a tape-and-reel configuration.
Is MAX232CWE+T in stock?
Check current availability by submitting the Request a Quote form on this page with your required quantity and shipment location. Distributor listings indicate market availability, but the confirmation for your order should come from a current quotation. XAIPART presents availability through the quote workflow rather than promising a fixed stock quantity that can change independently of purchase orders.
What is the difference between MAX232CWE+T and MAX232EWE+T?
The principal documented difference is package family: MAX232CWE+T uses a 16-pin wide SOIC, while MAX232EWE+T uses a 16-pin TSSOP. Both belong to the MAX232 function family, but their footprints are not interchangeable without a board change. Confirm pinout, width, lead pitch, and assembly process in the manufacturer datasheet before treating either ordering code as a substitute.
When should I choose MAX232CWE+T over MAX231EWE+T?
Choose MAX232CWE+T when the design uses a wide 16-pin SOIC footprint and needs a dual RS-232 transceiver rated to 120 kbps. MAX231EWE+T is appropriate when its documented electrical ratings and 16-pin TSSOP footprint match the design. Because package dimensions and pin assignment must both match, select the part according to the PCB footprint rather than only the transceiver function.
Is MAX232CWE+T suitable for industrial equipment?
MAX232CWE+T is suitable for many industrial RS-232 links when the link rate is 120 kbps or lower and the PCB layout follows the manufacturer application guidance. Its +5 V supply requirement simplifies instrumentation compared with a traditional dual-polarity RS-232 supply. Industrial suitability also depends on the qualified operating-temperature range, isolation strategy, grounding method, and surge requirements, which should be confirmed for the finished equipment.
What is the best drop-in replacement for MAX232CWE+T?
SP232ACT-L/TR is identified by the MaxLinear cross-reference listing as a pin-compatible functional equivalent to the MAX232CWE-T device. A second source should still pass a full review of data rate, supply voltage, receiver thresholds, charge-pump capacitor values, and ESD ratings. Use the Request a Quote form to request confirmation of availability for the specific alternative and quantity.
Can SP232ACT-L/TR replace MAX232CWE+T?
SP232ACT-L/TR can be considered as a pin-compatible second source because the MaxLinear cross-reference record identifies it as functionally equivalent and pin compatible with MAX232CWE-T. The record does not establish identical performance under every operating condition. Confirm the 120 kbps requirement, charge-pump network, logic thresholds, temperature range, and package drawings before approving a production substitution.
Where can I download the MAX232CWE+T datasheet PDF?
Download the manufacturer MAX220-MAX249 family datasheet from the Analog Devices technical-document page linked on this page. It contains the MAX232CWE pin description, electrical characteristics, charge-pump circuit, and recommended operating conditions. Use the device pin-description table and application circuit when assigning PCB tracks or calculating external capacitor connections.
Where can I find the MAX232CWE+T pinout?
The MAX232CWE+T pinout is documented in the Analog Devices MAX220-MAX249 family datasheet and corresponds to the 16-pin wide SOIC arrangement. Pin 1 is the R1OUT receiver output, pin 8 is a ground connection, and pin 9 is the negative charge-pump rail. Follow the pin-description table and package drawing in the datasheet when creating the schematic and PCB footprint.
How many external capacitors does MAX232CWE+T require?
The MAX232CWE+T application circuit uses five external charge-pump capacitors to generate the bipolar RS-232 voltage levels from a single +5 V supply. The manufacturer datasheet specifies the capacitor network and recommended values. Keep these components close to their associated pins and minimize the loop area of the charge-pump connections to reduce switching noise and radiated emissions.
What are the key specifications of MAX232CWE+T that engineers should know?
The key MAX232CWE+T specifications are +5 V single-supply operation, two driver channels, two receiver channels, full-duplex RS-232 operation, a 120 kbps maximum data rate, and a 16-pin wide SOIC package. It also supports EIA/TIA-232E, V.28, and V.24 interfaces and requires five external charge-pump capacitors. These values define its use in legacy serial-console, instrumentation, and equipment-link designs.

بيانات مرجعية هندسية لـ MAX232CWE+T — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose MAX232CWE+T for a +5 V system that needs a compact, dual RS-232 port at 120 kbps or below and already uses a 16-pin wide SOIC footprint. Its internal charge pump removes the need for separate positive and negative RS-232 supply rails. Consider SP232ACT-L/TR when pin-compatible second-source sourcing is more important than staying within the MAX232 family's documented electrical profile, but verify its data rate, supply arrangement, receiver thresholds, capacitor network, and temperature grade before approval. Do not substitute MAX232EWE+T or other E-suffix variants on the assumption that the transceiver function is sufficient; their package width and lead pitch differ. For new designs above 120 kbps, use a transceiver explicitly rated for the target rate rather than selecting an alternative with an unspecified rate.

المقارنة مع البدائل

المعامل هذا المنتج SP232ACT-L/TR
Brand Analog Devices MaxLinear
Package 16-pin wide SOIC 16-pin SOIC
Transceiver Configuration 2 drivers and 2 receivers 2 drivers and 2 receivers

أبرز الفروقات

  • Single +5 V supply with integrated bipolar charge pump (مقابلSP232ACT-L/TR)
  • Documented 120 kbps maximum data rate (مقابلSP232ACT-L/TR)
  • Two transmitters and two receivers in one device (مقابلSP232ACT-L/TR)

ملاحظات التصميم

Place the five external charge-pump capacitors adjacent to the pins shown in the manufacturer application circuit, and keep each capacitor's connection loop as short as practical. The switching charge-pump current circulates through these paths, so long traces can radiate noise into nearby receivers. Avoid routing RS-232 inputs and outputs directly beneath the charge-pump network, and provide a continuous ground reference beneath the device where board area permits.

Do not assume that every MAX232 ordering code is a board-level substitute. The C suffix denotes the wide SOIC package in this naming convention, while E denotes a narrow-body package with different lead dimensions. Confirm the manufacturer package drawing, pin numbering, and exposed or non-exposed pad arrangement before changing the bill of materials. Also verify the operating-temperature grade and supply requirements of the specific ordering code.

RS-232 is a single-ended standard, so the receiver's reference to the transmitter ground determines the available noise margin. Connect the interface ground to the equipment chassis or logic ground through the strategy defined for the finished product, and keep that connection away from high-current return paths. Long cables should use a defined shield ground and surge protection appropriate to the installation rather than relying on the transceiver alone for lightning or industrial transient protection.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

No definitive RoHS, REACH, halogen-free, or conflict-minerals declaration was identified for this ordering code. Confirm compliance documentation for the exact lot and shipping configuration when required by a customer specification.

تم التحقق من البيانات في: 2026-11-13 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

MAX232CWE+T datasheet MAX232CWE+T pinout MAX232CWE+T equivalent MAX232CWE+T replacement MAX232CWE+T price MAX232CWE+T stock MAX232CWE+T SOIC-16 footprint MAX232CWE+T 120kbps RS-232 MAX232CWE+T application circuit MAX232CWE+T vs SP232ACT-L/TR Analog Devices MAX232CWE+T MAX232CWE charge pump capacitors

المكونات والمصطلحات ذات الصلة

Analog Devices MAX232CWE+T MAX232CWE MAX232CWE-T SP232ACT-L/TR MaxLinear RS-232 transceiver line driver line receiver full-duplex serial interface EIA/TIA-232E V.28 V.24 charge-pump voltage generator CMOS logic level RS-232 bipolar signaling 120 kbps data rate single +5 V supply 16-pin wide SOIC surface-mount package external charge-pump capacitor UART industrial serial console legacy peripheral interface
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر